The mesh barrier F23 is useful for restricting or separating off areas on construction sites as well as open spaces. Material polypropylene.

Filter container with filter cartridge in cotton, nylon or charcoal for own water. Cotton and nylon filters for particles, and charcoal filters for odor and taste. Material specification: Filter head: Polypropylene, Threads: Brass, Filter bowl: SAN, O-ring: NBR

Using warning/marking nets, you can avoid unnecessary digging damage to district heating pipes. A special structure in the web mesh allows for the web to get tangled in the teeth of the excavator, and to get pulled up before accessing the pipe itself.

A robust drainage pumps for clean and slightly dirty water. The drainage pump is made of corrosion-resistant material and supplied with plug and levelling device for start and stop. The pump has built-in temperature protection with automatic resetting. Suitable applications are pumping out of cellars and garages, groundwater drainage, emptying of vessels and tanks, watering and fountains.

Plastic pipe coupling for PE pipes, compression ring in POM and sealing ring in EPDM. Max pressure PN16 at 20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at +20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN10 at 20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C, threaded union max PN10, dim 2½ and larger."

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C, threaded union max PN10, dim 2½ and larger."

Plastic pipe coupling for PE pipes, compression ring in POM and sealing ring in EPDM. Max pressure PN16 at 20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C, threaded union max PN10, dim 2½ and larger."

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM. Max pressure PN16 at 20˚C, threaded union max PN10, dim. 2½ and larger."

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C, threaded union max PN10, dim 2½ and larger."

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C, threaded union max PN10, dim 2½ and larger."

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C.

Compression coupling for PE pipes made of PP, compression ring of POM, sealing ring of EPDM and external brass thread. Max pressure PN16 at 20˚C.

To be fitted in AHL coupling to fit a smaller dimension PE pipe.

White nonwoven fabric packed in UV resistant plastic film. Approved in accordance with NordGeoSpec 2012 and ATB VÄG.

Type 2934 with V-marked cover. Square of grey iron D400.

Cover for valve cover 7033210 and 7033418

Type 2933 with V-marked cover. Square of grey iron D400.

With numeric dial. Only approved meters may be used for measuring domestic water consumption. The meter is protected from impurities by a pipe strainer in the inlet. The strainer can be replaced without breaking the seal. Supplied with first-time-use verification in accordance with the National Board of Housing, Building and Planning requirements. Type MNR-Artist without sensor. EEG-approved, class B.

Max temperature 120°C. DN 15-40 ext. thread connections, DN 50 with flanges SS PN16. EEG-approved for max +90°C.
Dry running. Max operating pressure 1.6 MPa.

The check valve is fitted in the outlet of the vane meter. Available for Qn 2.5, 6 and 10. The check valve does not affect the measuring results.

For cold water and hot water meters EPDM.

Fixed, complete covering for roadway inlets , 400x415 mm, A1 with horizontal grille.

Excl. distribution well.

Excl. distribution well

Incl. outlet well. Complement to infiltration bed.

Nonwoven fabric for infiltration beds.

Lid for easy covering.

Fixed, so-called “easy cover" for covering, eg., wells, storm drains in walkways and green spaces. Load class A15. Screw cap, stainless steel track screw grade 8.8.

Sieve well cover for easy servicing.

Frame for A1 covers.

Frame for A4 coverings

Frame for A6 coverings.

Frame for fire hydrant coverings.

Frame for service coverings.

Frame for valve coverings.

Fixed, so-called “easy cover" for covering, eg., wells, storm drains in walkways and green spaces. Load class A15. Screw cap, stainless steel track screw grade 8.8.

Fixed, so-called “easy cover" for covering, eg., wells, storm drains in walkways and green spaces. Load class A15. Screw cap, stainless steel track screw grade 8.8.

A-GRID geonet is used to reinforce friction material on roads and other paved surfaces. The geonet locks tight friction material in the rigid mesh structure and provides mechanical stabilisation and increased bearing capacity and service life. A-GRID can be used to reinforce roads built on land with poor bearing capacity like clay and marshland. Due to its rigid structure A-GRID locks fast friction material in a so-called pre-chill. Upon loading it imparts in a horizontal power transmission to the geonet, at the same time contributes to the geonet increasing and maintaining compression of the filling masses, which results in a significant increase in load capacity. With geonet’s reinforced effect it is possible to reduce the layer thickness, which provides significant cost savings. The experience shows that the layer thickness can be reduced by 30-50% by incorporating geonet in unbound layer.

Water- and radon seal in EPDM with terminal in Stainless acid-resistant steel. Long flange for reliable grip in ambient concrete and long life for tightening clamps

For tapping of additional connections on chambers and pipes in structural wall constructions.

Internally threaded bifurcation with reinforcement of stainless steel.

A flexible, complete pump drain, with a pump that can handle grey-water. Cannot be cut. Very well suited to, e.g., pump drains before infiltration. The drain is of polyethylene and equipped with a composite lock that is also childproof. The sump is designed with a larger diameter, which gives a longer service life for the pump. The sump’s larger diameter also helps keep the pump drain in the ground. The drain can
not be extended. The Unilift pump CC7 from Grundfos is included, with a tip and with pipe and internal connection via a sliding coupling for discharge. At the bottom of the drain are cast “heels" that hold the pump in place and raise
the pump up from the bottom. A cuff for a 110 mm pipe is included.

Chamfering tool for PEM pipes. Easily obtain a perfect chamfer for cut PEM pipe ends with a simple operation.

Pressure hose, PEH without stripe. Straight lengths with plugged ends.