Order lines: 0

Ahlsell Products Electric Installation equipment 11-1814 Pipe laying materials

14 Pipe laying materials

Connection boxes / connection caps

Flexible pipes with preinstalled wires/cable

Installation pipes with accessories

Cable glands and sealing sleeves

Coupling clamps and coupling strips

Metal pipes with accessories

Protective hose System

Fire sealing system

Installation package

Ex installation material

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Screwed angle joint BVWD 90°, M-thread

Screwed angle joint BVWD 90°, M-thread

Art. no.: 1470110

Angle screw fitting 90° with quick Coupling in IP 66. Also available in IP 68.

Fire sealant fss-3000

Fire sealant fss-3000

Art. no.: 1480425

Silicon adhesive
Silicone-based sealant in 310 ml cartridge which is applied using a cartridge gun. Intended for fire-classed joints and seals. Fire class A 60.

Fire sealant fss-3000

Device box Multifix Low without socket

Schneider Electric

Device box Multifix Low without socket

Art. no.: 1420588

Simple device box with adjustable ring for recessed use Disc thickness 13-26mm, flexible, 1-module, threaded screw ring, incl. plaster cover, Dark gray

Device box Multifix Low without socket

End sleeve with plug

End sleeve with plug

Art. no.: 1400429

We use splicing of VP pipes / flexi pipes when passing through wall to ceiling when pouring concrete. The end pipe is fitted with a seal to keep the pipe clean of concrete and foreign particles until the final assembly is done. The protrusion of the pipe can easily be cut to the desired length thanks to the pre-marked grooves on the pipe. Made of halogen-free material (IEC / 61249-2-21).

End sleeve with plug

Extension ring 6mm 1/1/2 Multifix black

Schneider Electric

Extension ring 6mm 1/1/2 Multifix black

Art. no.: 1420287

Extension ring 6mm Multifix black for 1/2 1/2 device box

Extension ring 6mm 1/1/2 Multifix black

Cable gland EMC

Cable gland EMC

Art. no.: 1475922

EMC cable gland with contact springs. For shielded cable. Integrated tension relief. Quick and simple EMC connection via contact springs. The construction of the grille insert prevents the cable getting twisted under tension

Slotted insert for detachable cable gland

Slotted insert for detachable cable gland

Art. no.: 1457298

Slotted inserts intended for UNI Flange (divisible flange system) and UNI Split Gland (divisible screw connection).

Connection cover ABB

Connection cover ABB

Art. no.: 1437740

With 2 choke nipples and tension relief for 2 outbound connection wires. Installed directly on an apparatus box. No extra sealing is required to achieve encapsulation class IP44.

Flex hose LSZH. PM Flex

Flex hose LSZH. PM Flex

Art. no.: 1416704

PM FLEX easily worked flexible installation tubes are halogen-free and made of environmentally friendly polypropylene. The tube has a treated and smoothed inner, which facilitates wiring, is protective and avoids wear. The tube is available in sizes 16-50mm, with or without a pull cord. Approved for installation in temperatures ranging from -25°C to +90°C. The 750N-pipes are approved for embedment. Our flexible tubes are also metre marked. The advantage of our halogen-free flexible tube is that it is more durable and can withstand more wear and tear than a traditional PVC tube.

Box cover for coupling box

Box cover for coupling box

Art. no.: 1422130

Box cover for junction box screw and snap

Box cover for coupling box

Multibox 45 Elko

Multibox 45 Elko

Art. no.: 1426105

Supplemental box intended for the sheet walls with single or double plasterboard. Copes with 45 mm to studs. Designed to be used together with the flexible PVC pipe, 16 mm, which can be installed from three different directions. Made of orange plastic. Box cutter for holes, E16 047 26.

Multibox 45 Elko

Multibox Elko

Art. no.: 1426110

Supplemental box for sheet walls with up to the 26 mm sheet thickness (double plaster), to be used together with flexible PVC pipe. The multibox has three 16 mm pipe connectors with lock springs and is manufactured in orange plastic. Box cutter for holes, E16 047 26.

VP tubes smooth made of PVC for Telecom and Data installations

VP tubes smooth made of PVC for Telecom and Data installations

Art. no.: 1414000

Rigid PVC conduit with smooth inside and outside surfaces. With a low friction inner. Electrical installation tubes approved for installation in temperatures ranging from -25°C to +60°C and for embedding.
Rigidity class 750N

VP tubes smooth made of PVC 750N

VP tubes smooth made of PVC 750N

Art. no.: 1414002

Rigid PVC conduit with smooth inside and outside surfaces. With a low friction inner. Electrical installation tubes approved for installation in temperatures ranging from -25°C to +60°C and for embedding.
The pipe has a low-friction side to facilitate cable laying. Rigidity class 750N

Multibox UHW 50, Attema

Multibox UHW 50, Attema

Art. no.: 1426127

box/housing for installation with flexi pipe in drywall without the need to make holes before mounting the boards or the use of search magnets. The box is fixed directly to the board and can therefore be placed anywhere between the wall studs. Constructed with folding double glands which makes it easy to mount the box even on 45mm Studs. The glands are internally conical and handles both 16 mm and 20 mm flexible pipe. Practical for combination installation since several housings can be connected together without any accessories and the housings ar equipped with a spike on the reverse side for marking the centre of the hole. No flanges sticking out provides just as tidy an installation as with traditional housings. Halogen free and approved in 850º filament test. When a longer box screw is needed a recessed M3 is used of the suitable length. Hole cutter T75 or hole saw 76 mm is used for punching.

Joint sleeve OMROG, unthreaded

Joint sleeve OMROG, unthreaded

Art. no.: 1405113

Product description: Hot-dip galvanised steel armoured pipe splice for very high durability requirements
Rigidity class: 4000 N
Colour: Zinc plated, grey
Temperature range: -45 to +400°C

Ceiling boxes VP-2

Schneider Electric

Ceiling boxes VP-2

Art. no.: 1420620

Ceiling box Multifix Ceiling provides a reliable junction point. This is partly thanks to the box’s versatility and ability to withstand a high load. Available in heights from 52 mm up to 111 mm for different ceiling constructions.

Ceiling boxes VP-2

Ceiling boxes VP-2

Ceiling boxes VP-2

Installation pipes halogen-free 320N, for sheet wall/open installation

Installation pipes halogen-free 320N, for sheet wall/open installation

Art. no.: 1416741

Halogen-free, rigid electrical conduit Ø 16-50 mm with smooth inside/outside; made of white polypropylene. Bent with the same bending spring as standard VP conduits. The conduits are class 2343 and are approved for installation in temperatures ranging from -25°C to 105°C. Ordered by the metre and delivered in three-metre lengths. The conduit (16-20 mm) can be bent using a standard spring.

Installation pipes halogen-free 320N, for sheet wall/open installation

Installation pipes halogen-free 320N, for sheet wall/open installation

Installation pipes halogen-free 320N, for sheet wall/open installation

Installation pipes halogen-free 320N, for sheet wall/open installation

Installation pipes halogen-free 320N, for sheet wall/open installation

Installation pipes halogen-free 750N, for encapsulation

Installation pipes halogen-free 750N, for encapsulation

Art. no.: 1416752

Halogen-free, rigid electrical conduit Ø 16-50 mm with smooth inside/outside. The inner diameter is slightly smaller than traditional VP conduits. For this reason, bending springs for 16 mm and 20 mm must be used (e-number 1600140 and -41). Made of grey polypropylene. The conduits are class 3343 and are approved for installation in temperatures ranging from -25°C to 105°C. The conduct (16-20 mm) can be bent with PM FLEX bending spring.

Connection box Exxact

Schneider Electric

Connection box Exxact

Art. no.: 1437732

Connection box with tension relief and nipples for two inbound connection wires, for mounting over and apparatus box c/c 60 mm with sealing set also IP44 or for fully surface mounting on a wall IP 20 montage.

Connection cover Exxact

Schneider Electric

Connection cover Exxact

Art. no.: 1437733

Connection cover with tension relief and nipple for inbound connection wires, for recessed IP21 mounting in an apparatus box c/c 60 mm. Use box IP21 for surface mounting. Supplemented by optional Exxact frame.

Connection cover, RS, for 2 cables, IP44

Connection cover, RS, for 2 cables, IP44

Art. no.: 1438380

Frame and centre cover of thermoplastic. For mounting in an apparatus box with 60mm attachment screw spacing. With doubled nipples and tension reliever for cables with diameter 6-14 mm. Supplied with an inner box for encapsulation class IP44.. Without inner box IP20. Halogen-free.

Connection cover, RS, for 2 cables, IP44

Flex hose on Coil, Speaker cable, halogen-free, PM-Flex

Flex hose on Coil, Speaker cable, halogen-free, PM-Flex

Art. no.: 1416580

Pre-wired HiFi - round stranded copper wires with two -coloured insulation of halogen-free PE. Application areas are with simpler installations of speaker systems. The conductor insulation shall be protected against direct UV light such as light in luminaries, electric signs or the like. The Flex tube with pre-wired speaker cable is colour-coded blue to simplify identification. Can be embedded up to 750N

Flex hose on Coil, Easy Flow, with pull wire, PM-Flex

Flex hose on Coil, Easy Flow, with pull wire, PM-Flex

Art. no.: 1402586

PM FLEX easily worked flexible installation tubes with pre-wired pull wire are halogen-free and made of environmentally friendly polypropylene. The tube has a treated and smoothed inner, which facilitates wiring, is protective and avoids wear. The tube is available in the dimensions 16mm-50mm. Approved for installation in temperatures ranging from -25°C to +90°C. The 750N-pipes are approved for embedment. Flex tubes are also metre marked. The advantage of PM Flex halogen-free flexible tube is that it is more durable and can withstand more wear and tear than a traditional PVC tube.

Fire sealant novaflex

Fire sealant novaflex

Art. no.: 1480019T

NOVAFLEX is a solvent-free grey sealant that expands when exposed to high temperatures in a fire and effectively seals any openings in the feed. NOVAFLEX is used mainly in fire sealing of plastic pipes and cable feeds in fire separating building parts. A detailed description can be found in the data sheet for system SKOTT HT. Works with Novaflex should be avoided at an ambient temperature lower than + 10 ° C. Registered in Basta.

Fire sealant novaflex

Pipe cuff novapipe s

Pipe cuff novapipe s

Art. no.: 1480020T

NOVAPIPE S is a circular stainless steel pipe cuff, internally coated with expanding sealant, Novaflex. The inside coated mass, Novaflex, expands when exposed to high temperatures in the event of fire and seals effectively any openings that may arise due to the melting plastic pipe in the feed. NOVAPIPE S is used mainly in fire sealing of plastic pipe feeds in fire separating building parts. Registered in Basta.

Flex hose, Flexible VP-hose, Pipelife

Flex hose, Flexible VP-hose, Pipelife

Art. no.: 1414022

Flexible installation pipes of PVC. Rigidity class 750N, temperature range -25º to +60º.
Product description: Flexible installation pipe of PVC, self-extinguishing
Rigidity class: 750 N
Colour: beige
Temperature range -25 to +60 °C

Flex hose TopSpeed, Pipelife

Flex hose TopSpeed, Pipelife

Art. no.: 1414052

Corrugated installation pipe. Electrical installation tubes approved for installation in temperatures ranging from -25°C to +60°C and for embedding.

Flex hose Inflex,Pipelife

Flex hose Inflex,Pipelife

Art. no.: 1414081

Halogen-free flex pipes with low-friction inside*
Product description: Flexible installation pipe of PP
Rigidity class: 750 N
Colour: grey RAL 7031
Temperature range -25 to +90 °C
• Up to 70% reduction of tensile resistance
• Fast and hassle-free wiring
• Reduces the need for auxiliary devices
• Excludes messy lubricants
• Facilitates future additions
• Lower costs and higher revenue
• Metre-marked
• 25 to +90°C
• Swedish made

Multibox/Fire box, Attema

Multibox/Fire box, Attema

Art. no.: 1426129

Renovation box with fold-out double nozzle. Approved in accordance with BS EN 1364-1:1999 and in accordance with BS EN 1366-3:2009. Quick mounted. Linkable. Hole measurements 76 mm. Conical nozzles for connection of both 16 and 20mm hose / tube. Fold-put nozzles, which makes them easier to use in confined spaces, eg at 45mm bracket. Centred marker spike on the back for fast & accurate hole punching. Halogen-free. 850° C Made of PE-HD.

Junction box with cast resin AK1-GH

Junction box with cast resin AK1-GH

Art. no.: 1438549

Junction box for burial. 3 M25 cable glands included. Connection terminal for earth braid included. Lifetime waterproof warranty if installed according to instructions. The casting resin mixes best at room temperature, but can be mixed at temperatures from 0ºC to +35ºC. Before mixing the casting resin, ensure that all electrical connections are properly routed and connected. For underwater applications (pools, fountains, etc.), the casting resin must harden in the box for at least one hour.

Junction box with cast resin AK1-GH

Device box for single and double plaster Rutab

Device box for single and double plaster Rutab

Art. no.: 1426101

The device boxes are supplied with a rotating mounting ring and are intended for mounting in 13mm or 26mm thick wall panels. The device boxes can be built together, have 3 nozzles (16mm), one of which is open. The nozzles have an integrated plastic lock spring.
The screw spacing is 60mm, is made of self-extinguishing and halogen-free Polypropylene and meets the IEC / EN60670: 2005 (850C) filament test requirements.
Semko, Nemko and Fimko approved

Device box for single and double plaster Rutab

Device box for single and double plaster Rutab

Junction box for single and double plaster Rutab

Junction box for single and double plaster Rutab

Art. no.: 1426103

The coupling boxes are supplied with a rotating mounting ring and are intended for mounting in 13mm or 26mm thick wall panels. The coupling boxes have 8 nozzles (8x16mm) of which 2x16 are open. Four nozzles have an integrated plastic locking spring.
The screw spacing is 67 mm, is made of self-extinguishing and halogen-free Polypropylene and meets the IEC/EN60670:2005 (850C) filament test requirements.
Semko, Nemko and Fimko approved

Box screw long Rutab

Box screw long Rutab

Art. no.: 1426109

Longer box screw M3 for assembly of boxes, eg after tiling, fits device boxes and coupling boxes as well as track boxes (14 260 36/14 260 37) and multi box 14 261 27

Box screw long Rutab

Cover for Junction box Rutab

Cover for Junction box Rutab

Art. no.: 1426038

Cover lid for coupling box with snap mount.
External diameter 95 mm

Protective conduit PCL - black

Protective conduit PCL - black

Art. no.: 1410001

Of self-extinguishing specially modified polyamide, resists oil, grease, and solvents. Can be used instead of steel coiled hose. IP54. Short-term +150° C. CSA-approved in accordance with 227.3, UL/UR-approved in accordance with E 80294. Halogen and cadmium free

Robot hose PIS

Art. no.: 1410100

Super-flexible hose of specially modified polyamide (PA12) PIST

Protective conduit PCL in box

Protective conduit PCL in box

Art. no.: 1410012

Machine hose, type PCLT/PCLG, in practical carton, intended for shops, service vehicles, or maintenance storage. Of self-extinguishing specially modified polyamide, resists oil, grease, and solvents. Can be used instead of steel coiled hose. IP54 Short-term temperature range +150° C. CSA-approved in accordance with 227.3, UL/UR-approved in accordance with E 80294. Halogen and cadmium free

Protective conduit PIS in box

Protective conduit PIS in box

Art. no.: 1410112

HOSE-IN-BOX Super-flexible hose of specially modified polyamide. Machine hose, type PCLT/PCLG, in practical carton, intended for shops, service vehicles, or maintenance storage. Of self-extinguishing specially modified polyamide, resists oil, grease, and solvents. Can be used instead of steel coiled hose. IP54 CSA-approved in accordance with 227.3, UL/UR-approved in accordance with E 80294. Halogen and cadmium free

Pipe coupling for U-56 junction box

Schneider Electric

Pipe coupling for U-56 junction box

Art. no.: 1400170

Pipe sleeve for connection of rigid and flexible pipes to electrical cabinets. For various pipe dimensions with a threaded portion 20 mm in diameter.

Pipe coupling for U-56 junction box

Pipe coupling for U-56 junction box

Pipe coupling for U-56 junction box

Pipe coupling for U-56 junction box

Cable fixing U-56

Schneider Electric

Cable fixing U-56

Art. no.: 1438006

Line bracket for installation of surface-mounted devices and boxes on a wire up to 10 mm.

Cable fixing U-56

Tension relief for U-56

Schneider Electric

Tension relief for U-56

Art. no.: 1438291

Tension relief for internal installation in enclosed box, U-56. Maximum of two tension relievers can be installed in box.

Partition wall U-56

Schneider Electric

Partition wall U-56

Art. no.: 1438294

Partition to provide split connection space in the U-56 enclosed box. Used to separate connection space between high and low tension, e.g. for HF control and EIB installations.

Aqua-White spacer blocks U-56

Schneider Electric

Aqua-White spacer blocks U-56

Art. no.: 1439191

Spacer block to provide free height for cable harnessing, etc. under junction boxes and other surface-mounted devices.

Tension relievers TED 001,010, 012 and 022

Schneider Electric

Tension relievers TED 001,010, 012 and 022

Art. no.: 1438092E

For boxes TED 001, 002, 010, 012, and 022.

Junction box AP7, Round IP44, ABB

Junction box AP7, Round IP44, ABB

Art. no.: 1438403

Junction box AP7 is equipped with fixed cable bushings of soft-membrane type, 10 on the sides and two at the bottom. The lid attaches with two screws, 78 mm distance. Can be equipped with tension reliever E14 384 01 or 06

Cable gland splice box IP68, Rutab

Cable gland splice box IP68, Rutab

Art. no.: 1459903

Screw-on junction box IP68 approved for fixed cable laying in e.g. cable ducts, suspended ceilings or cable ladders. Quick and easy installation. Perfect for tight spaces.

Cable gland splice box IP68, Rutab

Cable gland splice box IP68, Rutab

Junction box A-Box IP-65 with 5-pole terminal 5x32 mm², Spelsberg

Junction box A-Box IP-65 with 5-pole terminal 5x32 mm², Spelsberg

Art. no.: 1438110

Junction box 2K Junction box according to DIN EN 60670 (VDE 0606) with self-sealing, soft insertion diaphragm, Tools not required to open the pipe insertion, Sealing diameter 2 - 14 mm, with internal attachment points, with protection class IP55, up to 2.5², with degree of protection IK07, Protection class II, VDE-approved, Halogen-free without terminal block, for VDE approval

Junction box A-Box IP-65 with 5-pole terminal 5x32 mm², Spelsberg

Junction box Click IP55 Elko

Junction box Click IP55 Elko

Art. no.: 1437768

Enclosed design of beige halogen-free 2-component material. Snap-fastened cover without screws. Cast-in membrane nipples, including 2 at bottom. Supplied without connection clamps. Piercing is to be done with the cable, not with tools.

Junction box Click IP55 Elko

Junction box Click IP55 Elko

Junction boxes UL94/IP44 Elko

Junction boxes UL94/IP44 Elko

Art. no.: 1437760

Splash-proof design IP44. Made of halogen-free thermoplastic. Meets the requirements for installation in barns, UL94. Space for one connection terminal block 5x2.5mm2. Membrane nipples for two cables on each side. Dimensions 80x80x41mm.

Junction boxes UL94/IP44 Elko

Junction box Combinm308 IP66, Rutab

Junction box Combinm308 IP66, Rutab

Art. no.: 1438560

Material box, polypropylene PP, glass fibre-reinforced
TPE Membrane
Flameproofing Filament test 750ºC in accordance with EN 60695-2-11
Temperature range -30°C....+100°C
Protection class IP66 in accordance with EN 60529
Halogen-free
Integrated M20x1.5 threads for cable glands, no counterhold nut needed
4 quick screws for attachment of junction box cover
8 self-sealing elastic membranes
Impact-resistant
UV-resistant
Wall bracket E1438559 included, enabling quick installation and solving the problem of uneven surfaces at the same time

Cable gland for fire boxes E30-E90 orange

Cable gland for fire boxes E30-E90 orange

Art. no.: 1457017

Screw fitting set, consisting of screw fitting and counterhold nut for installation in junction boxes that require maintenance of electrical function in accordance with the requirements of E30-E90. Approved in accordance with EN 50262 protection class IP68
Fits to boxes with E-numbers 1437845 - 1437848.

Showing 52 of 565