Ahlsell
Order lines: 0
Quick order
AhlsellProductsVentilationFans/units

Fans/units

Fans

Do you work with the installation of fan units in duct systems? Ahlsell helps you find products with high capacity and easy installation. Fan units are an effective way to remove moisture and bad odors. Suitable for homes, property, or other spaces that require ventilation. Also available are mounting brackets, touch protection, and lead-through pipes. We offer a wide range of fan units. Take a look at our selection of fan units and extraction systems online or in one of our stores.

Duct Fan KVK SILENT 100-160 EC, Systemair
Systemair
Duct Fan KVK SILENT 100-160 EC, Systemair
Art. no.: 66421060
KVK Silent EC 100-160 is a fan with circular duct connections. Previously replaces KVKE EC. The casing is made of galvanized steel sheet, insulated with 50 mm thick high-density mineral wool insulation for best sound absorption and fire-engineering requirements with an inner surface layer that prevents the spread of fibers to the air. A screwed service door with hinges makes cleaning and servicing the fan simple. KVK Silent EC comes with integrated motor protection as well as integrated manual control which is pre-connected in the junction box in the form of a potentiometer that can control the fan 0-100%. The fan can easily be controlled on demand via sensors and control for eg. CO2, temperature, moisture, presence and VAV. See accessories list. The fan can be installed in any position. FK mounting clamp (accessory) enables easy installation and disassembly and prevents the transmission of vibration to the duct. • Low noise level, high density insulation • Compact design • Easy installation, maintenance and service • EC motor with high efficiency and low SFP • Adapted for demand controlled ventilation
Duct Fan PRIO, Systemair
Systemair
Duct Fan PRIO, Systemair
Art. no.: 6511149
The Prio fan is designed for installation directly to circular ducts. The fan housing is made of Alu zinc. Prio can be demand controlled via sensors and control for CO2, temperature, humidity, presence and VAV etc. or manually with eg. steplessly with a thyristor or a 5-step transformer.
To protect the fan, the fan motors have integrated thermal contact with extended conductors to be combined with a separate motor cover to break the mains voltage in the event of overheating. Motor protection must always be switched on for warranty to apply. Engine covers are integrated in some of the fan control units (see instructions for each controller) or as separate accessories.
• Compact fan with dense design • High efficiency and low SFP • Low noise level • Speed adjustable • Easy installation, maintenance and service • With mounting brackets • Integrated thermal contact
Duct Fan PRIO, SystemairDuct Fan PRIO, Systemair
Duct Fan KVK SILENT 200-500 EC, Systemair
Systemair
Duct Fan KVK SILENT 200-500 EC, Systemair
Art. no.: 66421063
KVK Silent EC is a fan with circular duct connections. Replaces formerly KVKE EC. The casing is insulated with thick mineral wool insulation with high density for best sound absorption and fire-resistant class EI30. The casing is made of Alu zinc and corrosion class C4. KVK Silent EC comes with integrated motor protection as well as integrated manual control, which is pre-coupled in the junction box in the form of a potentiometer that can control the fan 0-100%. , temperature, humidity, presence and VAV See accessories list The fan can be installed in any position FK mounting clamp (accessory) allows easy installation and disassembly and prevents transmission of vibration to the duct • Low noise level, high density insulation
• Compact design • Easy installation, maintenance and service • EC motors with high efficiency and low SFP • Adapted for demand controlled ventilation • Fire engineering class EI30. • Corrosion class C4
Duct Fans K EC SILEO, Systemair
Systemair
Duct Fans K EC SILEO, Systemair
Art. no.: 66411006
EC fans are very energy efficient and easy to control. They can be controlled speedlessly to match the airflow requirement, potentiometer supplied. For the same air flow, they consume considerably less energy than fans with AC motors. EC motors contribute to large reductions in energy use, especially in speed control. In speed control the energy consumption of the EC motor is much lower than for an asynchronous motor with a corresponding power. Reduced energy use guarantees lower operating costs. The K EC series is intended for duct mounting. All K-fans have at least 25 mm long connection socket. To facilitate installation, the K-fans have pre-assembled mounting brackets as standard. FK bracket makes mounting / disassembly easy and prevents vibration transfer to duct. The fans have backward curved blades and maintenance-free outer rotor motor (EC) and are supplied with a pre-coupled potentiometer (0-10V), factory set to 6-10V. To protect the motor from overheating, the fans have integrated motor protection. The casing is made of galvanized steel sheet and is folded, which provides a close to airtight casing.
Roof Fan TKS AC with rectangular connection, Östberg
Östberg
Roof Fan TKS AC with rectangular connection, Östberg
Art. no.: 66111722
Roof fan with square connection with horizontal exhaust. Has high performance and reliable. The fan wheel is equipped with backward-curved blades. The outer rotor motor has maintenance-free double-encapsulated ball bearings. Comes with integrated motor protection and junction box with protection class IP 54. For speed control, a transformer or thyristor can be connected. Comes with cord stand that can be easily disassembled if needed. The fan housing is made of galvanized sheet steel which is powder coated in black or brick red as standard. Swing-up design for easy service and cleaning of the fan wheel. The ceiling fan is most easily installed with the TFU roof penetration for TKS. The fan meets environmental requirements M2. Insulation class, motor: F. Maximum temperature of transported air differs slightly between models. TKS 400 B has its maximum of 60 ° C while the models 300 C, 400 A / C ErP are at 70 ° C. TKS 300 A has its maximum temperature of 80 ° C and TKC 300 B at 90 ° C.
Roof Fan TKC AC with circular connection, Östberg
Östberg
Roof Fan TKC AC with circular connection, Östberg
Art. no.: 66111573
Roof fan with circular connection and horizontal exhaust. Has high performance and is reliable. The fan wheel is equipped with backward-curved blades. The outer rotor motor has maintenance-free double-encapsulated ball bearings. Comes with integrated motor protection and junction box with protection class IP 54. For speed control, a transformer or thyristor can be connected. Comes with cord stand that can be easily disassembled if needed. The fan housing is made of galvanized sheet steel which is powder coated in black or brick red as standard. Swing-up design for easy service and cleaning of the fan wheel. The ceiling fan is most easily installed with roof penetration TGÖ and TGU for TKC. The fan meets environmental requirements M2. Insulation class, motor: F. Maximum temperature of transported air differs slightly between models. The TKC 400 B has a maximum of 60 ° C while the models 300 C, 400 A / C ErP are at 70 ° C. TKC 300 A has its maximum temperature of 80 ° C and TKC 300 B at 90 ° C. TKC is also available with EC motor and then goes by the name TKC EC.
Wall fans KVFU, Östberg
Östberg
Wall fans KVFU, Östberg
Art. no.: 6611160
Wall fan with circular inlet and square mounting plate. Is compact with high capacity and efficiency. The fan wheel is equipped with backward-curved blades. The outer rotor motor has maintenance-free double-encapsulated ball bearings. Comes with integrated motor protection and junction box with protection class IP 54. For speed control, a transformer or thyristor can be connected. The fan housing is made of galvanized sheet steel. The fan is intended for installation in duct systems, mounted on the inner wall. Easy installation in any position and can also be used in humid environments. Maximum temperature of transported air is 60 ° C for all models with some exceptions. Models 315B / C ErP have a maximum temperature of 50 ° C, 160C at 65 ° C and model 125C a maximum of 70 ° C. Insulation class, motor: F.
Roof Fan TFSR, Systemair
Systemair
Roof Fan TFSR, Systemair
Art. no.: 6610970
TFSR is a series of ceiling fans that have a circular base frame with single-suction radial fans equipped with backward-curved blades and maintenance-free outer rotor motors. The fans are foldable and equipped with service switches for easy cleaning and service and 1m electrical cable for connection to junction box. To protect the motor from overheating, the fans have impedance-protected motors. TFSR is screwed to the TOB / TOS roof bushing and then connected to the TOB / TOS junction box.The fans are made of galvanized sheet steel, powder coated.TFSR 125-160 is supplied with Ø 160 inlet pipe TFSR 200-315 with Ø 200. To avoid problems, we recommend that the fan runs continuously • Swing-out • Voltage adjustable • Easy to install • Maintenance-free and reliable
Black = RAL 9005
Red = RAL 8004
Roof Fan TFSK, Systemair
Systemair
Roof Fan TFSK, Systemair
Art. no.: 6610980
TFSK is a series of ceiling fans with a square base frame that have single-suction radial fans with backward-curved blades and maintenance-free external rotor motors. These fans are suitable for exhaust ventilation in villas, apartment buildings, offices and preschools. The fans are foldable and equipped with service switches for easy cleaning and service as well as 1m electrical cable for connection to junction box TFSK has a square connection adapted to roof penetration TG.
To protect the motor from overheating, the fans have impedance-protected motors. They are made of powder-coated galvanized sheet steel.
• Swing-out • Voltage adjustable • Easy to install • Maintenance-free and reliable
Black = RAL 9005
Red = RAL 8004
Duct Fan IRE AC, Östberg
Östberg
Duct Fan IRE AC, Östberg
Art. no.: 6611701
IRE is equipped with a radial fan with forward or backward angled blades on the fan wheel. It tolerates high pressure with a low noise level. IRE is also available with one or two double pulling radial fans. 50 mm of insulation also means that the fan can be in the cold rooms. The swing out design facilitates cleaning and the fan’s design prioritizes function, durability and life. The stable chassis has been manufactured entirely of galvanised steel sheet. The outer rotor engine is reliable, maintenance-free and high quality.
All IRE are rpm adjustable 0-100% by voltage and frequency control. All IRE have approved thermo-contact engine protection as standard, and can also be supplied with an extensive thermal contacts, for example, for emergency operation (standard on the 3-phase fans).
Accessory for wet room fan Pax
Pax
Accessory for wet room fan Pax
Art. no.: 9302371
Various accessories suitable for Pax Fitted series.

back draught shutter Fitted Can be used to avoid air movements in undesired directions during fan installation in ducts without natural circulation (e.g. against an exterior wall). This assumes that another ventilation system handles the building’s basic ventilation flow.
Noskona Pax is installed according to need as a replacement of back draught shutter on the Pax Fitted 31.
All pole switch Fitted According to the standards for household products, EN 60 335-1, can be isolated from the electricity network.
Pax Wall plate Used as a mounting/support frame when the fan doesn’t cover the channel opening and/or when there are issues with screw anchors in the direct vicinity of the channel opening.
Spacer frame Fitted moves the fan 52mm out from the surface, i.e. the same distance that Pax Fitted Fans usually recesses into the ventilation channel. Therefore, together with the spacer frame, it becomes possible to mount the fans in channels smaller than Ø100 mm, or channels where for some other reason it is too cramped for normal installation with an insert.
Accessory for wet room fan PaxAccessory for wet room fan Pax
Roof Fan TKV, Östberg
Östberg
Roof Fan TKV, Östberg
Art. no.: 6611185
Ceiling fan TKV with square connection and vertical exhaust. Has high performance and reliable. The fan wheel is equipped with backward-curved blades. The outer rotor motor has maintenance-free double-encapsulated ball bearings. Comes with integrated motor protection and junction box with protection class IP 54. For speed control, a transformer or thyristor can be connected. The fan housing is made of galvanized sheet steel which is powder coated in black or brick red as standard on the models 300 & 400 A / B / C. These models meet environmental requirements M2. The models 560-960 A-J also have a fan housing made of galvanized sheet steel, and come in powder-coated or with a varnish that meets Environmental Class M3 / Corrosion Class C4, if applicable. These models are also available unpainted. All fans in the TKV series come with a swing-up design for easy service and cleaning of the fan wheel. The ceiling fan is most easily installed with the TFU roof penetration. Insulation class, motor: F.
Roof Fan TKC EC with circular connection, Östberg
Östberg
Roof Fan TKC EC with circular connection, Östberg
Art. no.: 19034189
Roof fan with circular connection and horizontal exhaust. Has high performance and reliable. The fan wheel is equipped with backward-curved blades. The outer rotor motor is energy efficient and has maintenance-free double-encapsulated ball bearings. Comes with integrated motor protection and junction box with protection class IP 54. Speed control can be done with the built-in potentiometer, 0-10 V alt. external regulation. Comes with cord stand that can be easily disassembled if needed. The fan housing is made of galvanized sheet steel which is powder coated in black or brick red as standard. Swing-up design for easy service and cleaning of the fan wheel. The roof fan is most easily installed with roof penetration TGÖ and TGU for TKC. The fan meets environmental requirements M2. Insulation class, motor: F. Maximum temperature of transported air: 60 ° C.
Roof Fan TKS EC with rectangular connection, Östberg
Östberg
Roof Fan TKS EC with rectangular connection, Östberg
Art. no.: 19034201
Roof fan with square connection with horizontal exhaust. Has high performance and reliable. The fan wheel is equipped with backward curved blades. The outer rotor motor is energy efficient and has maintenance-free double-enclosed ball bearings. Comes with integrated motor protection and junction box with protection class IP 54. 0-10 V or external control The fan housing is made of galvanized steel sheet which is powder coated in black or brick red as standard Swing-up design for easy service and cleaning of the fan wheel The roof fan is most easily installed with TFU roof penetration for TKS The fan meets environmental requirements M2. Insulation class, motor: F. Maximum temperature of transported air 60 ° C.
Frequency: 50/60 Hz.
Bathroom fan Klimat K7
Klimatfabriken
Bathroom fan Klimat K7
Art. no.: 9302520
Klimat K7 is a Swedish-made multifunction fan with excellent performance, high pressure capacity and low noise level. It is both a bathroom fan, with six selectable ventilation solutions and a heat exchanger.

- Easy to install: Unscrew the wall frame (integrated seals). Connect phase and zero. Clear!
- Easy to select function: Lift the cover. Select mode. Clear!
- Easy to clean: Motor unit with bayonet socket makes the fan easy to disassemble and clean.

Four speeds for optimal ventilation, self-adjusting humidity control, presence sensor movement / light, timer, ventilation function, thermostat, manual start / stop via switch. Self-calibrating motor with built-in cruise control that optimizes the ventilation flow and counteracts cold even when the fan is running at low speed. Negligible energy consumption 3 Watt. Materials with low environmental impact (PP).

All-pole switch Yes
Insulation class Class II must not be earthed
Certificate S - Intertek
Markings CE
Material Polypropylene (low environmental impact)

Connection Hidden or surface mounted
Channel Ø: Ø100 mm (hole making Ø110 mm)
Location Wall or ceiling
Type of motor BLDC
Warranty 5 years

Speed: low, Capacity: 40 m3 / h (11.1 l / s), Pressure; 8Pa, Sound pressure level; 17 dBA @ 3 m
Speed: medium, Capacity: 60 m3 / h (11.1 l / s), Pressure; 16Pa, Sound pressure level; 18 dBA @ 3 m
Speed: high, Capacity: 95 m3 / h (11.1 l / s), Pressure; 35Pa, Sound pressure level; 21 dBA @ 3 m
Speed: max, Capacity: 110 m3 / h (11.1 l / s), Pressure; 48Pa, Sound pressure level; 25 dBA @ 3 m
Roof Fan TFC S, Systemair
Systemair
Roof Fan TFC S, Systemair
Art. no.: 66431003
TFC is a ceiling fan intended for residential and commercial properties. It has energy-efficient EC fans with the option of demand control. TFC has a simple and ergonomic" swing-out "function that facilitates maintenance. Available in the colors black and red.
TFC is available in two variants:
The S variant has a potentiometer as standard, which makes it possible to control the fan speed steplessly from 0 - 100%. This is a simple solution when no demand control is required.
The P variant has variable airflow (VAV) pressure control with outdoor compensation as standard, but is prepared for and can easily be converted to constant airflow (CAV).
Advantages of TFC: • Easily accessible safety switch on the outside of the housing • High efficiency EC motors • Lower energy consumption results in lower energy costs • 100% speed adjustable • Demand-controlled ventilation - easy to adjust the ventilation to the actual need • Low noise level thanks to insulated housing
Color code: Black = RAL 9005 Red = RAL 8004 Corrosivity class C4
Showing 52 of 69