Order lines: 0

Ahlsell Products VentilationValves and indoor grilles

Valves and indoor grilles

Fresh air valves

Tallriksventiler

Fönsterventiler

Villas and properties benefit greatly from good ventilation. Ahlsell helps you find the right fresh air valve and indoor grille for your needs. With an installed fresh air valve, the house gets fresh air that benefits everyone, even the house. Here you will find grilles for use externally on the wall, a cover plate covering the opening of the duct, and several different solutions for the installation of a fresh air valve. Most well-known suppliers are in our range. Explore our range of products for installing fresh air valves here in the online store or visit your nearest Ahlsell store.

ÖÖ - Genomföringskit KLIMATFABRIKEN

ÖÖ - Genomföringskit KLIMATFABRIKEN

Art. no.: 9302758

Valve/Mold stop

Valve/Mold stop

Art. no.: 110924

Roof vent with hood made of impact-resistant plastic. Intended for ridge and ceiling base ventilation which effectively prevents the undesired effects of mice, moisture, condensation and mould. Mounted in the sub ceiling, between the counter batten and the brick roof batten. The recommended amount for mounting is 2 units per ceiling truss section.

Fresh air valve A 98P, a-collection

Fresh air valve A 98P, a-collection

Art. no.: 6621515

Flexible wall valve for wall mounting, intended for continuous ventilation of houses. Fitted with filter and condensation insulation.
The air quantity is regulated with a continuous precision throttle which is manoeuvred by a slider. Complete with bushing Ø98 / 102 mm and external grille.
Made of white plastic, NCS S0502-Y. Can be combined with Fresh TL accessories.

Fresh air valve A 80R, a-collection

Fresh air valve A 80R, a-collection

Art. no.: 6621516

Round wall valve for wall mounting, intended for continuous ventilation of houses. Fitted with filter and condensation insulation.
The valve has three opening modes that are easily controlled with or without cord. Complete with bushing Ø81 / 85 mm and grille i-pack.
Made of white plastic, NCS S0502-Y. Can be combined with Fresh TL accessories.

ÖÖ - Friskluftsventil Fresh TL80DE dBs NY

ÖÖ - Friskluftsventil Fresh TL80DE dBs NY

Art. no.: 9302640

Backdraught protection, Fresh

Backdraught protection, Fresh

Art. no.: 6611217

Fresh wall bushing fits directly onto the external adapter and can be joined together by pressing.

Fresh air valve Sound-reduced Fresh 90 dB

Fresh air valve Sound-reduced Fresh 90 dB

Art. no.: 6621543

Fresh 90 dB reduces incoming external noise from e.g. traffic. The vent is supplied complete with Fresh 90 internal and external grilles, both with a fixed cover plate which covers 165x165 mm. Wall bushing consists of a sound-reducing dB-pipe for a wall thickness of up to 400mm. Other lengths can be ordered. The pipe fits telescopically onto the internal part which allows for a flexible connection.

Disc valve ATRA, a-collection

Disc valve ATRA, a-collection

Art. no.: 6421522

Plate valve for self-extracting ventilation, both exhaust air and supply air valve. White-painted sheet steel. Screwed for attachment to a wall or duct. White-painted sheet steel.
Connected to a wall or duct.

Fresh air valve Fresh F100 Thermo

Fresh air valve Fresh F100 Thermo

Art. no.: 6621547

Fresh 100 Thermo is continuously controlled by the outside temperature so that the vent closes automatically when the temperature drops and opens when the outdoor temperature rises. The built-in thermostat regulates the opening of the vent so that it starts to close at +10^oC and is fully closed at -5 ^oC. This basic setting can be changed with a simple hand movement so that the vent does not close completely. The vent is particularly well suited for self-extracting ventilation.

Filter for Fresh Valves

Filter for Fresh Valves

Art. no.: 6621598

Various filters for Fresh valve.

Filter for Fresh Valves

Filter for Fresh Valves

Filter for Fresh Valves

Filter for Fresh Valves

Filter for Fresh Valves

Window valve Fresh 35

Window valve Fresh 35

Art. no.: 115597

Plastic. For windows. For factory assembly or “do-it-yourself". 363x20 mm.

disc valve 282

Art. no.: 110243

Intended for spiro pipes. Round, made of white plastic.

Connection adapter to fresh air valve

Connection adapter to fresh air valve

Art. no.: 6611222

Fresh adapter is used to transition between wall pipes and grille 150x150 or 110x150.

Disc valve Pisla 243

Disc valve Pisla 243

Art. no.: 6520661

Made of white metal. With quick-coupling frame.

Disc valve Pisla 248 Pinewood

Disc valve Pisla 248 Pinewood

Art. no.: 6520669

With quick-coupling frame.

Block valve 446

Block valve 446

Art. no.: 111272

Length min/max 165-320 mm.

Slot valve Biobe

Slot valve Biobe

Art. no.: 107956

Naturally anodised aluminium or white-powder lacquered aluminium. The outdoor unit has an insect mesh and shelter. When Biobe is assembled in a frame, an elevation is sometimes required, which lifts the vent so that the air stream can freely pass above the upper rim of the window frame.

Slot valve Biobe

Slot valve Biobe

Slot valve Biobe

Frame Valve 90

Art. no.: 222650X

Aluminium frame vent for inwards and outwards windows. Equipped with a regulator which opens or closes the vent without steps.

disc valve A80

Art. no.: 6621501

Plate vent made of aluminium. Round with cover.

Input air pack Pax wall vents 80 and 100

Input air pack Pax wall vents 80 and 100

Art. no.: 9302454

Manual or automatic thermostat-controlled outdoor air device for the direct intake of outdoor air. The device is intended for almost all types of rooms with natural ventilation or fan controlled exhaust air ventilation It reduces the risk of draft and prevents severe cooling and freezing damage in cold weather.
Thermo cassette E9302474 is used for upgrading from manual to Thermostat-controlled wall vent.

Manual version:
The device is variably controlled by a lever with distinct positions for open vent and closed vent.

Automatic version:
The device automatically controls the intake air according to variations in the outside temperature. The thermostat’s sensor body sets the shutter in the vent. At -5°C the damper is completely closed and at +10°C completely open.
Available in versions with a round or square cover.

R = Round cover
M = Manual function
T = Thermostat-controlled function
P = Package containing vent, wall pipe and outer wall grille.

Wall hole-cutting measurements: PAX Air supply package 100 = Ø 110 mm/PAX Air supply package 80 = Ø 95 mm.
Max wall thickness for PAX Air supply package 80/100 = 370 mm.

Windbreak cover Pax

Windbreak cover Pax

Art. no.: 9302308

Intended for use in combination with PAX Outer wall grille 80/100 as protection against wind, snow and rain by supply or exhaust air ducts. Made of grey ABS plastic.

Disc valve RKT,FläktGroup

Disc valve RKT,FläktGroup

Art. no.: 6621521

For self-extracting ventilation, both exhaust air and supply air valve. White-painted sheet steel. Screwed for attachment to a wall or channel.

Window Valves Fresh 31, 32 and 42

Window Valves Fresh 31, 32 and 42

Art. no.: 6621550

The Window valve is manufactured in plastic. The vent consists of an internal part and external wind-protection. The internal part is in endowed with a regulator for continuous opening or closing of the valve. The terminal is made from ABS plastic. Screw and nail included. The valve is primarily intended for closing windows and is surface-mounted onto the frame or arch. Fresh 31 supplies air directly into the room while Fresh 32 spreads air upwards and downwards.

Window valve Fresh 40

Window valve Fresh 40

Art. no.: 6621560

Plastic window vent. The vent consists of an internal part and external wind-protection with grille. The airflow is simply regulated by opening/closing the front. The front functions as an air deflector when in the open position. This makes it possible to direct the air flow upwards or downwards in order to get the best degree of mixing with ambient air and minimise the risk of draught. Fresh 40 can be mounted onto both opening and closing windows. Depending on the distance to the window casement and embrasure, the vent may need to be turned 180° so that the air flow is not prevented. The filter prevents dust and insects from coming in through the vent. By completely opening the damper, the filter can be easily accessed for changing or cleaning. This also distributes the air more evenly over the valve opening. Mounts onto the top piece of the window frame. Designed so that milling on the frame or mounting screws are not visible, even in its fully opened position. The vent has a low pressure drop. Drill pattern E66 215 60 not included.

Modular pipe for fresh air valve

Modular pipe for fresh air valve

Art. no.: 6611218

Fresh wall bushing fits directly onto the external adapter and can be joined together by pressing.

Fresh Air Valve Cover Plate

Fresh Air Valve Cover Plate

Art. no.: 6611223

Fresh cover plate for mounting where the fan/vent does not cover the duct opening.

Väggventil KLIMATFABRIKEN K1

Väggventil KLIMATFABRIKEN K1

Art. no.: 9302759

Sisäventtiilii Fresh TL-F

Sisäventtiilii Fresh TL-F

Art. no.: 9302623

Fresh air valve Fresh 100

Fresh air valve Fresh 100

Art. no.: 66121510

Easy to assemble fresh air vents with consist of an internal vent, wall bushing and an external grille. For walls thicker than 360mm, an extension pipe is available as an accessory. The vents have two positions which can be adjusted variably. Easily change between them using the pull string. The filter is placed in an expansion chamber which results in an extra large filter surface, fewer filter changes and good air distribution. Hole piercing 86mm, 5.2 l/s.

Fresh air valve Fresh TL100DE inv. part

Fresh air valve Fresh TL100DE inv. part

Art. no.: 9302571

Easy to assemble fresh air vents with consist of an internal vent, wall bushing and an external grille. For walls thicker than 360mm, an extension pipe is available as an accessory. The vents have two positions which can be adjusted variably. Easily change between them using the pull string. The filter is placed in an expansion chamber which results in an extra large filter surface, fewer filter changes and good air distribution. Hole piercing 86mm, 5.2 l/s.

Fresh air valve Fresh TL100DE inv. part

Biobe screw short

Biobe screw short

Art. no.: 759106

Biobe screw short

Window valve Omega internal

Window valve Omega internal

Art. no.: 759114

Window valve Omega internal

Window valve with outdoor part

Window valve with outdoor part

Art. no.: 9302314

Supply air valve for mounting in a window frame or window frame. Consists of an indoor part and an outdoor part. With the indoor part, the air flow can be adjusted steplessly via a lever. The outdoor area is equipped with insect grilles that prevent rain and insects from entering. Air duct is opened by drilling. The valve is fastened with screws that are hidden by cover plates.

Modular tube 100 / 104x130

Modular tube 100 / 104x130

Art. no.: 9302609

Modular tube 100 / 104x130. Telescopic tube with two long sockets. One socket with gasket that provides a secure seal against the other. The second socket can be extended with an extra modular tube. Tube 100 / 104X130 for use in extending external socket 661072

Drill Template Fresh

Drill Template Fresh

Art. no.: 6621553

Steel drilling template. Guides the drill, giving the correct distance between the holes. The holes are placed in a straight line on both sides of the frame or arch.

Friskluftsventil Fresh TL100C T

Friskluftsventil Fresh TL100C T

Art. no.: 9302625

Friskluftsventil Fresh TL80C-dBs

Friskluftsventil Fresh TL80C-dBs

Art. no.: 9302626

ÖÖ - Friskluftsventil Fresh TL100DE T NY

ÖÖ - Friskluftsventil Fresh TL100DE T NY

Art. no.: 9302642

ÖÖ - Friskluftsventil Fresh TL100DE T NY

Showing 38 of 38