Order lines: 0

Ahlsell Products Heating and Sanitation Installation pipes and partsDomestic hot water system

Domestic hot water system

Pipe systems PEX Ahlsell

Installation systems, Vatette

Domestic hot water systems Universal/PAL, LK

Domestic hot water systems PEX/MLC, Uponor

Domestic hot water systems Mepla, Geberit

Tap water system FlowFit

Potable Water System, Purmo

Are you looking for tap water systems for your HVAC project? The tap water systems offered by Ahlsell have been carefully selected. Choose from a variety of products in our range to find the best option for your project. We offer a variety of installation pipes and parts in different styles. We are happy to assist you in HVAC to find the right equipment for delivering high-quality results. Visit your local Ahlsell store or browse our entire range of tap water systems here on the website.

Products (534)

Radiator Coupling PressPex M22, LK

Radiator Coupling PressPex M22, LK

Art. no.: 1878203

PressPex connector with loose nut for connection of LK PE-X as well as LK PAL universal pipe to a radiator coupling M22.

Coupling washer V6 Green 2-pipe, Vatette

Coupling washer V6 Green 2-pipe, Vatette

Art. no.: 8511022

Coupling washer for 2 pipes. For Copper, Stainless Steel, PEX, PE-RT, PB, PEM pipes and Multilayer pipes.

Coupling washer V6 Green 2-pipe, Vatette

Coupling washer V6 Green 2-pipe, Vatette

Coupling washer V6 Green 2-pipe, Vatette

Thermometer, LK

Thermometer, LK

Art. no.: 2434747

LK Thermometer with temperature range 0-80°. Shaft Ø9. Suits for example LK OptiFlow EVO II, LK Manifold, LK Thermometer pocket, etc.

Support bracket for protective pipe, Uponor

Support bracket for protective pipe, Uponor

Art. no.: 2418432

Galvanised sheet steel.

Switch cabinet 250x250, LK

Switch cabinet 250x250, LK

Art. no.: 1882706

LK Connection cabinet is a compact connection cabinet with room for four connections without group shut-off and three with group shut-off. The cabinet can also be used to splice pipes into the wall. The cabinet can also be used to connect a VUK water ejector with cold and hot water. The water ejector's pipe is pulled through the back of the cabinet where knockout holes are provided with grommets.There are four holes in the bottom of the cabinet, as well as four knockout holes upwards and two knockout holes on either side.

Supplied complete with cover white color RAL9016. The cabinet must not be installed with the door into a room with a waterproof layer on the wall. Placement of the switch cabinet can take place in the outer wall on the warm side.

The cabinet and the door are made of powder-coated sheet steel. The cabinet has a waterproof bottom with a 50 mm high front edge. LK Dränagebøj V2 complete is enclosed for the leakage indication out of the wall.

The cabinet is completed with the required number of cabinet penetrations, separate article:
• Empty pipe dimension 25 use LK Cabinet feed-through 25 empty pipe.
• Pipe dimension 12–16 use LK Pipe penetration 8-20.
• Pipe dimension 20–34 use LK Cabinet grommet UNI.

Straight transition Universal pipe - CU, LK

Straight transition Universal pipe - CU, LK

Art. no.: 1876602

Press coupling for joining LK PAL and LK PE-X Universal pipe.

Threaded Insert RS, External Thread, Uponor

Threaded Insert RS, External Thread, Uponor

Art. no.: 1899491

Distributor UNI, LK

Distributor UNI, LK

Art. no.: 1870688

Extendable manifold for heat and tap water systems. Made of dezincification-resistant brass, nickel-plated.

Distributor UNI, LK

Distributor UNI, LK

Distributor UNI, LK

Distributor UNI, LK

PAL Universal Pipe A with Conduit (RiR), LK

PAL Universal Pipe A with Conduit (RiR), LK

Art. no.: 1874487

Pipes fitted in empty pipe of black HD polyethylene. Supplied in roll, in carton package.

PAL Universal Pipe A with Conduit (RiR), LK

PAL Universal Pipe A with Conduit (RiR), LK

PAL Universal Pipe A with Conduit (RiR), LK

PAL Universal Pipe A with Conduit (RiR), LK

PAL Universal Pipe A with Conduit (RiR), LK

Radiator Bracket Support, LK

Radiator Bracket Support, LK

Art. no.: 4814367

For Universal pipe PE-X RiR. Used for pipe exit from floors and are screwed or nailed to the building frame.

Ball Valve 434 Blue/Red, straight internal/external, LK

Ball Valve 434 Blue/Red, straight internal/external, LK

Art. no.: 4811011

Ball Valve 434 Blue/Red, straight internal/external, LK

Ball valve 821 ECO, LK

Ball valve 821 ECO, LK

Art. no.: 4810035

Shut-off valve in lead-free dezincification-resistant brass with G20 thread, external EuroCone and internal for connection to distributor UNI. Can be easily supplemented with LK PressPex Press connection coupling RSK 188 24 12 and 188 24 13 or LK Connection coupling RSK 241 72 98 and 187 58 90. Can be mounted against the O-ring seal on the external G20 side of the LK Distributor UNI, which facilitates assembly of valve and distributor without additional sealing.

Ball valve 821 ECO, LK

Ball valve 821 ECO, LK

Replacement PEX pipe, Uponor

Replacement PEX pipe, Uponor

Art. no.: 2054407

Used to facilitate pipe running of the new Uponor PEX pipe in protective when changing out composite pipe.

Replacement PEX pipe, Uponor

Straight coupling PushFit with swivel nut chrome, LK

Straight coupling PushFit with swivel nut chrome, LK

Art. no.: 1882468

Push connector designed for LK PE-X and PAL Universal pipes. Comes complete with mounted support sleeve. For flat sealing. Gasket included.

Straight coupling PushFit with swivel nut chrome, LK

Combi Pipe RIR with insulation black/grey, Uponor

Combi Pipe RIR with insulation black/grey, Uponor

Art. no.: 2005052

Uponor-combi PEX-pipe for both potable water and radiator systems with a white protective pipe with blue and red bands.

Combi Pipe RIR white, Uponor

Combi Pipe RIR white, Uponor

Art. no.: 2418535

Uponor-PEX-pipe for both potable water and radiator systems with a white protective pipe with blue and red bands. Supplied in a coil.

Combi Pipe RIR white, Uponor

Uni Pipe Plus S, 3m, Uponor

Uni Pipe Plus S, 3m, Uponor

Art. no.: 2004937

A tube without welding splice. The new manufacturing method gives the tube less bending radius. Straight lengths become stiffer and pipes in rings become softer than previous MLC tubes. Existing connectors for MLC fit the Uni Pipe PLUS tube. Fire class E according to standard EN 13501-1.

Frame/door UNI UTV, LK

Frame/door UNI UTV, LK

Art. no.: 1881312

Frame with cover for UNI distributor box mounted externally on wall. Made of 1 mm powder-coated sheet steel, white colour RAL 9016.
By default, the door equipped with a screwdriver lock and accessories include a key lock.

Frame/door UNI UTV, LK

Frame/door UNI UTV, LK

Frame/door UNI UTV, LK

Frame/door UNI UTV, LK

Frame/door UNI UTV, LK

Joint sleeve, LK

Joint sleeve, LK

Art. no.: 1870583

For splicing LK Empty tubes.

Joint sleeve, LK

Joint sleeve, LK

Transition coupling with external thread FlowFit, Geberit

Transition coupling with external thread FlowFit, Geberit

Art. no.: 2257789

Transition coupling with external thread FlowFit, Geberit

Transition coupling with external thread FlowFit, Geberit

Transition coupling with external thread FlowFit, Geberit

Transition coupling with external thread FlowFit, Geberit

Transition coupling with external thread FlowFit, Geberit

Half coupling, LK

Half coupling, LK

Art. no.: 1878145

Supplied with fibre seal.

PE-X Universal Pipe X with Conduit, LK

PE-X Universal Pipe X with Conduit, LK

Art. no.: 1882335

Universal pipe for heating and tap water systems. Provided with oxygen diffusion barrier. Supplied fitted in an empty pipe made of HD Polyethylene. Max operating pressure, 1.0 MPa. Max continuous operation temp., +70°C. Max instantaneous temp., +95°C.

PE-X Universal Pipe X with Conduit, LK

PE-X Universal Pipe X with Conduit, LK

PE-X Universal Pipe X with Conduit, LK

PE-X Universal Pipe X with Conduit, LK

PE-X Universal Pipe X with Conduit, LK

Nipple Aqua Plus external thread, Uponor

Nipple Aqua Plus external thread, Uponor

Art. no.: 1883176

Nipple in chrome-plated brass with external thread ½"-¾" for connecting mixers. Delivered complete with cover plate (70 mm) and gasket. Length: 85 mm.

Nipple Aqua Plus external thread, Uponor

Dismantling tool Smart Tool Push AX, LK

Dismantling tool Smart Tool Push AX, LK

Art. no.: 1882549

Removing tool for LK PushFit coupling 16, 20 and 25. The tool also contains two templates for the depth of insertion of the PushFit coupling for PE-X and PAL pipes, dimension 16 (20 mm) and a joint for 20 and 25 (23 mm).

End seal, LK

Art. no.: 4814369

For sealing between PE-X pipes and empty pipes.

End seal rubber, LK

End seal rubber, LK

Art. no.: 4810000

For sealing between media pipes and empty pipes.
Article 4814393: Black
Article 4814394: White

End seal rubber, LK

End seal rubber, LK

Coupling Cabinet VUK, LK

Coupling Cabinet VUK, LK

Art. no.: 1876498

LK Connection box VUK is primarily intended for secure mounting of the water spout. Location of the connection box can be carried out in the outer wall or inner wall leading to an outer wall.
The box is waterproof in accordance with trade rules SAFE WATER.

Coupling Cabinet VUK, LK

T-pipe equal-sided FlowFit, Geberit

T-pipe equal-sided FlowFit, Geberit

Art. no.: 2254521

T-pipe equal-sided FlowFit, Geberit

T-pipe equal-sided FlowFit, Geberit

T-pipe equal-sided FlowFit, Geberit

T-pipe equal-sided FlowFit, Geberit

T-pipe equal-sided FlowFit, Geberit

MLC Clamp, Uponor

MLC Clamp, Uponor

Art. no.: 3811450

Uponor Single Clamp, 16-20 mm and 25-32 mm, for MLC pipes. The brace’s screw attachment is on its underside, enabling the brace to be fastened to the wall before the pipe. Sealant for use in wet rooms is included.

Uni Pipe Plus, roll, Uponor

Uni Pipe Plus, roll, Uponor

Art. no.: 2004921

A tube without welding splice. The new manufacturing method gives the tube less bending radius. Straight lengths become stiffer and pipes in rings become softer than previous MLC tubes. Existing connectors for MLC fit the Uni Pipe PLUS tube. Fire class E according to standard EN 13501-1.

Uni Pipe Plus, roll, Uponor

PAL Universal Pipe A, Straight Lengths, LK

PAL Universal Pipe A, Straight Lengths, LK

Art. no.: 1882579

Supplied in tubular paper packages. The pipes are normally supplied in complete packages with the quantity/package as below. Packaging costs are added for opened packages.

PAL Universal Pipe A, Straight Lengths, LK

PAL Universal Pipe A, Straight Lengths, LK

PAL Universal Pipe A, Straight Lengths, LK

PAL Universal Pipe A, Straight Lengths, LK

PAL Universal Pipe A, Straight Lengths, LK

Distributor UNI 2+2, LK

Distributor UNI 2+2, LK

Art. no.: 1870785

Extendable manifold for heat and tap water systems.
Mounted on wall in LK Manifold bracket or in LK Manifold panel UNI. Made of dezincification-resistant brass, nickel-plated. The manifold has a connection G20 (ext and int thread) for supply pipe and connection G15 c/c 50 mm ext. thread on branch. The manifold has O-ring seal on the external G20 side for the supply pipe which facilitates the assembly of 2 manifolds without additional seal.

Distributor UNI 2+2, LK

Ball Valve 801 Blue, straight internal/external, LK

Ball Valve 801 Blue, straight internal/external, LK

Art. no.: 4810041

Shut-off valve in dezincification-resistant brass with G20 thread, external EuroCone and internal for connection to distributor UNI. Can be easily supplemented with LK PressPex Press connection coupling RSK 187 66 06 and 187 66 07 or LK Connection coupling RSK 241 72 98 and 187 58 90. Can be mounted against the o-ring seal on the external G20 side of the LK Distributor UNI, which facilitates assembly of valve and distributor without additional sealing.

Ball Valve 801 Red, straight internal/external, LK

Ball Valve 801 Red, straight internal/external, LK

Art. no.: 4810042

Shut-off valve in dezincification-resistant brass with G20 thread, external EuroCone and internal for connection to distributor UNI. Can be easily supplemented with LK PressPex Press connection coupling RSK 187 66 06 and 187 66 07 or LK Connection coupling RSK 241 72 98 and 187 58 90. Can be mounted against the o-ring seal on the external G20 side of the LK Distributor UNI, which facilitates assembly of valve and distributor without additional sealing.

Combination pipe PE-RT/Al/PE-RT straight lengths, Purmo

Combination pipe PE-RT/Al/PE-RT straight lengths, Purmo

Art. no.: 2522797

Oxygen diffusion-tight multilayer pipe in PE-RT/Al/PE-RT. The pipe is type-approved for tap water systems (70/95°C, 10 bar) and suitable for use in cooling and heating systems.

Open pipe bending support, tap water system, LK

Open pipe bending support, tap water system, LK

Art. no.: 2435505

For fixing bends on PE-X pipes.

Open pipe bending support, tap water system, LK

Coupling Set AX16, LK

Coupling Set AX16, LK

Art. no.: 4814373

For connection of LK Universal pipe A16 and X16 to Connex coupling CU15.

Coupling Set AX16 FKR, LK

Coupling Set AX16 FKR, LK

Art. no.: 4814374

For connection of Universal A16 or X16 to clamping coupling dy15 (e.g. A coupling).

Coupling Set, LK

Coupling Set, LK

Art. no.: 4814397

For connection of Universal A16 or X16 to clamping coupling dy15 (e.g. A coupling).

Protective pipe Teck black, Uponor

Protective pipe Teck black, Uponor

Art. no.: 2417064

Supplied in a coil.

Support bushings, Uponor

Support bushings, Uponor

Art. no.: 1869945

For sealing and placement of wall sockets. For Protective pipe 25/20mm

End seal for protective pipe, Uponor

End seal for protective pipe, Uponor

Art. no.: 1870125

Made of plastic. For sealing between composite pipes and protective pipes for running a pipe up for example out of the floor.

Floor fixture including spacers, Uponor

Floor fixture including spacers, Uponor

Art. no.: 1870155

Made of polypropylene. For floor penetrations to radiators. Fits protective pipes with dimensions 25/20 mm, c/c 40 mm can be adjusted with spacers, each 5 mm.

Plug Set for Cabinet, Aqua PLUS, Uponor

Plug Set for Cabinet, Aqua PLUS, Uponor

Art. no.: 2054586V

Distributor Cabinet Lock, Aqua PLUS. Uponor

Distributor Cabinet Lock, Aqua PLUS. Uponor

Art. no.: 2054587

Spare part lock with coin slot for Distributor Cabinet A-K. steel. chrome-plated.

Support bracket Flipflex, Uponor

Support bracket Flipflex, Uponor

Art. no.: 2418474

the pipe bend support gives a tight bend radius and covers the pipe like a sleeve. Used when running up or down through the ceiling level as a pipe protector or when a tight bend is required.

Fixing plate for conduit, Uponor

Fixing plate for conduit, Uponor

Art. no.: 2418623

Galvanised sheet steel. For fixing protective pipe against wooden joists when running pipes. Nailed against the wooden joist or similar.
Fits protective pipe sizes 25/20, 28/23 and 34/29mm.

Press Elbow 90º PPSU, Uponor

Press Elbow 90º PPSU, Uponor

Art. no.: 1877960

Stainless steel Press angle with press sleeve.

Press T-piece PPSU, Uponor

Press T-piece PPSU, Uponor

Art. no.: 1877964

Press T - pipe with Press sleeve made of Stainless steel.

Straight joint coupling PPSU, Uponor

Straight joint coupling PPSU, Uponor

Art. no.: 1877975

Stainless steel Press connector with press sleeve.

Press Coupling DR External Thread, Uponor

Press Coupling DR External Thread, Uponor

Art. no.: 1878147

Tin-coated brass, with stainless steel sleeve or alt. aluminium.
DR = brass dezincification-resistant.

Press Coupling Internal Thread, Uponor

Press Coupling Internal Thread, Uponor

Art. no.: 1878212

Tin-coated brass, with stainless steel sleeve or alt. aluminium.
DR = brass dezincification-resistant.

Press Coupling Internal Thread, Uponor

Showing 52 of 534