Order lines: 0

Ahlsell Products Heating and SanitationSteel pipes and parts

Steel pipes and parts

Pipes stainless

Pipe fittings stainless

Flanges for stainless pipes

Threaded pipe sections Stainless

Cutting rings/Instruments/Clamping ring couplings

Stainless steel quick-release couplings

Stainless sheet

Rod, angle/flat iron, stainless

Profile pipes stainless

Pipe systems for foods

Steel threaded pipes

Malleable pipe parts

Steel pipe fittings, forged

Repair couplings

Steel pipe sections

Steel pipes & parts, spiral-welded

Ahlsell offers a various range of steel pipes and fittings for any type of project. In our range, you will find everything needed for your next installation. Apart from pipes, we also offer fittings, flanges, sheet metals, and rod couplings in various materials such as stainless steel, carbon steel, and many others. Customers can also request a material certificate in line with EN10204-3.1. This can be requested when placing your order. Explore our wide range of steel pipes and fittings here in Ahlsell's online store or visit your nearest Ahlsell shop.

Flange gasket, DIXO 5000, 1.5mm thick, Densiq

Flange gasket, DIXO 5000, 1.5mm thick, Densiq

Art. no.: 1505718

The limit values stated apply in favourable conditions. Do not utilise multiple limit values at the same time. Please contact us if in doubt. Nitrile rubber-bonded aramide fibre board of universal type. Economical and easy to cut and clip. Used for water, weak acids and alkalies, oils, fuel, solvents, gases etc. Max operating temperature +200°C for brief periods and +120°C continuously.

Steel tube, EN 10217-1, P235-TR1

Steel tube, EN 10217-1, P235-TR1

Art. no.: 1341288

Length 6 metres.

Steel pipes threaded without collar, hot-dip galvanized, SMS 326

Steel pipes threaded without collar, hot-dip galvanized, SMS 326

Art. no.: 1222173

SS-EN 10255. SMS 326. Material S195. In lengths of 6 metres.

Flat welding flanges PN 16, EN 1092-1 Type 01 - S235JRG2, ISO

Flat welding flanges PN 16, EN 1092-1 Type 01 - S235JRG2, ISO

Art. no.: 1427210

Dimensions in mm.

Bend, welded, in commercial quality S235, SS-EN 10253-1 Type A

Bend, welded, in commercial quality S235, SS-EN 10253-1 Type A

Art. no.: 1342138

Model 3D R=1.5xD

Bend 90°, 3D, ISO, EN 10253-4, EN 1.4404

Bend 90°, 3D, ISO, EN 10253-4, EN 1.4404

Art. no.: 1466093

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Welding flange with collar PN 6, EN 1092-1 type 11 - ISO, S235

Welding flange with collar PN 6, EN 1092-1 type 11 - ISO, S235

Art. no.: 1422153

Dimensions in mm

Bend 5D, seamless, in pressure vessel quality P235GH-TC1, SS-EN 10253-2 Type A

Bend 5D, seamless, in pressure vessel quality P235GH-TC1, SS-EN 10253-2 Type A

Art. no.: 1380286

Model 5D R=2.5xD, Certificate EN10204-3.1

Loose flange ISO 1.4404

Loose flange ISO 1.4404

Art. no.: 1467520

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Female coupling with internal cylindrical thread, 316/1.4404, Type 633-D in acid-resistant steel

Female coupling with internal cylindrical thread, 316/1.4404, Type 633-D in acid-resistant steel

Art. no.: 2172508

Kamlock Quick Coupling.

Pressed Collar ISO, EN 1.4307

Pressed Collar ISO, EN 1.4307

Art. no.: 1467263

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

T-connector pressed, metric, EN 10253-4 Type A, EN 1.4432

T-connector pressed, metric, EN 10253-4 Type A, EN 1.4432

Art. no.: 1466783

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Foot plate with hole for profile pipe

Art. no.: 4437023

Foot plate / Welding plate for profile pipes in stainless steel EN 1.4301. With holes 14 mm or 18 mm.

Welding flange with collar ISO 1.4404, PN 16

Welding flange with collar ISO 1.4404, PN 16

Art. no.: 1467395

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Bend 90°, R=D+100, metric, EN 10253-3, EN 1.4307

Bend 90°, R=D+100, metric, EN 10253-3, EN 1.4307

Art. no.: 1466886

Certificate EN10204-3.1. If a certificate is desired, this must be requested at the time of ordering. R = D + 100 Type A.

Welding flange with collar metric 1.4404, PN 40

Welding flange with collar metric 1.4404, PN 40

Art. no.: 1467401

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Handle for LKB - butterfly valve

Handle for LKB - butterfly valve

Art. no.: 19080780

Stainless Steel Cold Rolled Sheet, EN 10028-7/EN 9444, surface 2B, material EN 1.4301

Stainless Steel Cold Rolled Sheet, EN 10028-7/EN 9444, surface 2B, material EN 1.4301

Art. no.: 4437001

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.
PLEASE NOTE! 8 mm, Hot rolled, surface 1D

Seamless stainless hydraulic tubes EN 1.4404/ASTM TP 316L EN 10216-5 TC1/ASTM A 269

Seamless stainless hydraulic tubes EN 1.4404/ASTM TP 316L EN 10216-5 TC1/ASTM A 269

Art. no.: 1227260

In 6 metre lengths.
Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.
Tolerance in accordance with EN 10305-1/ASTM A 269.

Square plug cyl. cast. stainless, R-237, EN 1.4404

Square plug cyl. cast. stainless, R-237, EN 1.4404

Art. no.: 1457328

If a certificate is required it must be requested whilst ordering.

Bend Food, ISO 90° (R = 1.5xD) 316L

Bend Food, ISO 90° (R = 1.5xD) 316L

Art. no.: 19085011

Certificate provided on request.

Reducing nipple stainless, R-209, EN 1.4404

Reducing nipple stainless, R-209, EN 1.4404

Art. no.: 1248092

If a certificate is required it must be requested whilst ordering.

Flat welding flanges PN 10, EN 1092-1 Type 01 - S235JRG2, ISO

Flat welding flanges PN 10, EN 1092-1 Type 01 - S235JRG2, ISO

Art. no.: 1426782

Dimensions in mm.

Flange gasket Multiflon Blue, EN1514-1 IBC

Flange gasket Multiflon Blue, EN1514-1 IBC

Art. no.: 1505084

Flanges, covers, openings and parting line. Suitable for a wide variety of media, e.g. acids, bases, solvents, chlorine, chlorine dioxide, petroleum products, etc.
Suitable for temperature range: -200°C to +180°C.
PTFE reinforced with glass fibre.

Male coupling with external pipe thread, 316/1.4404, Type 633-F in acid-resistant steel

Male coupling with external pipe thread, 316/1.4404, Type 633-F in acid-resistant steel

Art. no.: 2173401

Kamlock Quick Coupling.

Blind flanges 4404

Blind flanges 4404

Art. no.: 1467628

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Pressure vessel pipes, longitudinally welded, P235GH-TC1, EN 10217-2 Cert

Pressure vessel pipes, longitudinally welded, P235GH-TC1, EN 10217-2 Cert

Art. no.: 34713544

Square plug cone. cast. stainless, R-238, EN 1.4404

Square plug cone. cast. stainless, R-238, EN 1.4404

Art. no.: 1457316V

If a certificate is required it must be requested whilst ordering.

ÖÖ - T-rör pressat ISO, EN 10253-3 Typ A, EN 1.4307

ÖÖ - T-rör pressat ISO, EN 10253-3 Typ A, EN 1.4307

Art. no.: 1467315

Stainless steel pipes EN 1.4307 longitudinally welded, ISO EN 10217-7

Stainless steel pipes EN 1.4307 longitudinally welded, ISO EN 10217-7

Art. no.: 1227124

In 6 metre lengths.
Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Flange gasket, Grafex EX

Flange gasket, Grafex EX

Art. no.: 19064509

Expanded metal-armoured flat sealFor sealing of flange couplings at high pressures and high temperatures. Can be used for almost all medias with the exception of strong oxidising acids at high temperatures. Can, in favourable cases, replace spiral-wound gaskets. Temperature range: -200°C to +550°C, higher in non-oxidising media.

Metric welding ring with collar 1.4432, PN 16

Metric welding ring with collar 1.4432, PN 16

Art. no.: 1467671

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Acid-resistant pipes EN 1.4404 longitudinally welded, ISO EN 10217-7

Acid-resistant pipes EN 1.4404 longitudinally welded, ISO EN 10217-7

Art. no.: 1227158

In 6-meter lengths. Standard EN 10217-7 TC1. Annealed, pickled.
ATTENTION! Std EN 10296-2 for DN 700 and larger.
Tolerances YD ≤168.3 mm according to D3 / T3. YD>168.3 mm according to D2/T3.

ISO standard Pipe, EN ISO 1127.

Tolerance on outer diameter D:

Outer diameter D≤168.3, Tolerance class D3, Allowed deviation +/-0.75% or +/-0.3mm. Whichever is bigger.
Outer diameter D≤168.3, Tolerance class D4*, Allowed deviation +/-0.5% or +/-0.1mm. Whichever is bigger.
Outer diameter D>168.3, Tolerance class D2**, Permissible deviation +/-1.0%.

*Tolerance class D4 if necessary against special manufacturing only and at extra cost.
**Tolerance class D2 on all pipes with a D to T ratio below 10:1 and press-formed pipes Stos tolerances are guaranteed only on pipe ends.

Wall thickness tolerance T:

Tolerance class T3, Permissible deviation +/-10% or +/-0.2mm. whichever is greater.

Certificate EN10204-3.1 If a certificate is desired, this must be requested at the time of ordering.

Loose flange forged metric 1.4404

Loose flange forged metric 1.4404

Art. no.: 1467545

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Female coupling with external pipe thread, 316/1.4404, Type 633-B in acid-resistant steel

Female coupling with external pipe thread, 316/1.4404, Type 633-B in acid-resistant steel

Art. no.: 2173382

Kamlock Quick Coupling.

Elbow female galvanized cast, no. 90

Elbow female galvanized cast, no. 90

Art. no.: 1270172

Threaded pipe parts according to EN 10242 (ISO 49) of adused castings according to EN-GJMW-400-5. Black pipe parts are oiled for storage and transport protection. Also available hot galvanized. Threads according to EN 10226-1/ISO 7-1. Pipe parts are checked and tested before delivery.

Lösfläns tryckkärlsstål, PN10 EN1092-1 Typ02 ISO, varmgalv, P265/P280GH

Lösfläns tryckkärlsstål, PN10 EN1092-1 Typ02 ISO, varmgalv, P265/P280GH

Art. no.: 19058516

Stainless welding nipple, R-208, EN 1.4404

Stainless welding nipple, R-208, EN 1.4404

Art. no.: 1248055

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Blind flange PN16, SS-EN 1092-1 Type 05/A-P250GH

Blind flange PN16, SS-EN 1092-1 Type 05/A-P250GH

Art. no.: 1437136

Certificates may be ordered. From TÜV approved production.
Dimensions in mm.

Seamless pressure vessel tubes according to EN 10216-2, Sold in descending lengths of 5-7 meters

Seamless pressure vessel tubes according to EN 10216-2, Sold in descending lengths of 5-7 meters

Art. no.: 1357060

Material P235GH-TC-1 Certificate EN10204-3.1.
In lengths of 5–7 m. If a certificate is required, it must be requested whilst ordering. From TÜV approved production.

Model 42 coupling, KMS female couplings with hose socket, hot-dip galvanized

Model 42 coupling, KMS female couplings with hose socket, hot-dip galvanized

Art. no.: 1621820

Lock, ring and latch system of galvanised steel. L= 210 mm.

Loose flange pressure vessel steel, SSG & EN1092-1 Type 02 - hot-dip galvanized, P280GH or P265GH, PN 10

Loose flange pressure vessel steel, SSG & EN1092-1 Type 02 - hot-dip galvanized, P280GH or P265GH, PN 10

Art. no.: 1434685

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Loose flange pressure vessel steel, SSG & EN1092-1 Type 02 - hot-dip galvanized, P280GH or P265GH, PN 16

Loose flange pressure vessel steel, SSG & EN1092-1 Type 02 - hot-dip galvanized, P280GH or P265GH, PN 16

Art. no.: 1434666

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Loose flange pressure vessel steel, SSG & EN1092-1 Type 02 - hot-dip galvanized, P280GH or P265GH, PN 40

Loose flange pressure vessel steel, SSG & EN1092-1 Type 02 - hot-dip galvanized, P280GH or P265GH, PN 40

Art. no.: 1434654

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.

Clamp ring Food 304.

Clamp ring Food 304.

Art. no.: 19080712

Compression flange coupling.

Sealing tape Softseal

Sealing tape Softseal

Art. no.: 19064521

Softseal consists of 100% expanded PTFE. Supplied in tape form, self-adhesive on one side for easy fitting. Does not require high surface pressure, therefore ideal for weak flanges. Suitable for most media.

Pipe holder Food, double for welding, type "Trönninge" 304L.

Pipe holder Food, double for welding, type "Trönninge" 304L.

Art. no.: 19080560

Svetsring med krage ISO 1.4404, PN 40

Svetsring med krage ISO 1.4404, PN 40

Art. no.: 1467805

Svetsring med krage ISO 1.4404, PN 16

Svetsring med krage ISO 1.4404, PN 16

Art. no.: 1467786

Food-grade coupling wrench

Food-grade coupling wrench

Art. no.: 19080851

For SMS couplings.

Bend Food, short 90° (R = 1xD) 316L

Bend Food, short 90° (R = 1xD) 316L

Art. no.: 19085001

Certificate provided on request.

Food-grade longitudinally welded tubes, stainless steel 304L

Food-grade longitudinally welded tubes, stainless steel 304L

Art. no.: 1227033

Showing 52 of 338