Order lines: 0

Ahlsell Products Consumables Chemical technology and hygieneOil - grease - cutting fluids

Oil - grease - cutting fluids

Rustproofing and rust removers

Lubricating oils

Lubricating grease

Electronic products

Tapping and cutting fluids

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Products (177)

Protective rust primer master zink

Protective rust primer master zink

Art. no.: 163797

Cold galvanisation on spray or can. The paint contains more than 90% zinc in the ready colour film, so the resulting surface corresponds to hot-dip galvanisation. Hazard labelling: harmful to health, environmentally hazardous.

Protective rust primer master zink

Bearing grease sapphire

Bearing grease sapphire

Art. no.: 230646

Multi-complex thickened bearing grease with MoS². Withstands high loads and vibrations. Extends lubricating intervals for all types of bearings. Temperature range -30ºC to +150ºC.

Rust Protection Master Zinc Zinc Spray

Rust Protection Master Zinc Zinc Spray

Art. no.: 37947395

Master Rust Protection Zinc is used to protect iron and steel surfaces, weld seams, etc., from corrosion. The finished paint film contains at least 90% zinc, which electrochemically bonds to iron or steel surfaces with the help of air moisture. The product is self-healing in the event of mechanical damage due to the zinc's ability to spread over the exposed surface. Rust Protection Zinc provides rust protection comparable to hot-dip galvanizing but can be applied directly on-site.

Master Penetrant Rust Releaser Eco

Master Penetrant Rust Releaser Eco

Art. no.: 708162

Compressor Oil Starta Synt 46

Compressor Oil Starta Synt 46

Art. no.: 34128440

Silicone grease molykote 55m

Silicone grease molykote 55m

Art. no.: 180037

Silicone-based grease for O-rings, for lubrication of rubber and metal applications. Very oxidation stable, compatible with most plastic and rubber materials.

Lubricating grease Mobilgrease XHP

Lubricating grease Mobilgrease XHP

Art. no.: 277028

Mobilgrease XHP™ 220 greases are extended service lithium complex greases intended for a wide variety of applications and severe operating conditions. These greases were designed to outperform conventional products by applying cutting edge, proprietary, lithium complex manufacturing technology. They are formulated to provide excellent high-temperature performance with superb adhesion, structural stability and resistance to water contamination. These greases have a high level of chemical stability and offer excellent protection against rust and corrosion. These greases feature high dropping points and maximum recommended operating temperature of 140º C. Mobilgrease XHP 220 greases are available in NLGI grades 00, 0, 1, 2 and 3 with an ISO VG 220 base oil viscosity.

Silikon electric grease

Silikon electric grease

Art. no.: 317964

Dow Corning 4 Electrical Insulating Compound, 100 gram. Electrically insulating grease, silicone-based. Excellent thermal stability and oxidation resistance. Good moisture barrier characteristics. Works as grease between -55 - +200° C. Often used as seal against moisture in aviation, vehicle, and marine applications. FDA-approved.

Bearing grease molykote

Bearing grease molykote

Art. no.: 105155

Suitable for glide and rolling bearings and for other grease-lubricated machine elements. From the fat, a firm lubricating film is created under pressure which is flattened in to the goods and which gives emergency running capabilities, if other lubrication should disappear.

Bearing grease molykote

Lube silicon glidex unipack

Lube silicon glidex unipack

Art. no.: 3115109

GLIDEX Spray are versatile and effective sprays that are completely free of organic solvents and ozone-damaging propellants. NSF-approved for use in the food industry. GLIDEX Spray provides light, problem-free assembly of plastic collar pipes, rubber strips, and rubber gaskets. The silicone content means that even after an extended period, the pipe segments can be disassembled; the silicone also protects the rubber gasket against drying out or decaying. Good adhesion in wet/moist environments. GLIDEX Spray is also useful in pulling installation cables in pipes, and as a moisture barrier for conductive parts; it is also an effective, quick-acting lubricant for stuck locks, hinges, fittings, tools, etc.

Cable lubricant LUB-1

Cable lubricant LUB-1

Art. no.: 1600435

Makes feeding cables and leads quicker, easier, cleaner and not least safer. 90% of cable faults are linked to damage that happens during installation. Cable greasing agent which works with the most common cable cover materials. The thick, flexible consistency doesn’t change during storage or temperature variations. The lubricant is easy to use and apply without runs or drops and isn’t harmful to the skin.

Cable lubricant LUB-1

Cable lubricant LUB-1

Lubricant, Uponor

Lubricant, Uponor

Art. no.: 3115136

For lubrication of the ends of the PVC pipes in connection with mounting of rubber sealed joints.

Lubricant, Uponor

Lock Spray CRC Lock De-Icer

Lock Spray CRC Lock De-Icer

Art. no.: 236939

First aid for all types of lock. Thaws and prevents freezing as well as lubricating and cleaning. 15 ml. AE. Hazard labelling: Extremely flammable.

Lubricant crc belt anti-slip

Lubricant crc belt anti-slip

Art. no.: 471155

Belt grip spray that preserves and increases efficiency of flat, round and V-shaped drive and transmission belts. Prevents grinding and gnashing and that drive belts cracking. Hazard labelling: Extremely flammable. NSF H1

Lubricant crc dry lube

Lubricant crc dry lube

Art. no.: 471150

Dry lubrication. Grease and oil free. For lubrication of plastic, rubber and metal. Withstands temperatures up to 250°C NSF H1. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Protective rust primer

Protective rust primer

Art. no.: 288748

Rust-Oleum Hard Hat rustproofing base paint penetrates into the rusty surface and prevents continued corrosion. Can be repainted after 10 minutes but within 1 hour (or alternatively after 48 hours), can be handled after 30 minutes. Designed for bare or slightly rusty steel. Lead- and chromium-free. Hazard labelling: Extremely flammable, irritant,harmful to health.

Protective rust primer

Grease Renolit Uniway LIX 42 Fuchs

Grease Renolit Uniway LIX 42 Fuchs

Art. no.: 469152

Hydraulic oil Q8 Haydn 32

Hydraulic oil Q8 Haydn 32

Art. no.: 318055

Q8 Haydn is an oil for being mobile and stationary
internal hydraulic system. Suitable for bearings,
Regulators, bevel gears and general circulation and
machine greasing. Contains Zinc
Antiwear additives (AW). The oils are even
Suitable for oil mist lubrication.

The advantages:
High natural viscosity index
Fulfils the highest requirement for filterability with
Hydraulic pump manufacturers
Good air and water separation powers
Good wear protection
Protects against rust and corrosion
good oxidisation stability and thermic
stability permits for longer oil change intervals
Minimal foaming

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Art. no.: 471480

All-round product that dissolves rust, grease and resin, drives out moisture, lubricates, stops squeaks and creaking and release stuck mechanisms, 556. Protects in corrosive environments and prevents rust. Item 10052: Labelling: harmful to health.

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Art. no.: 3115121

SUPERGLIDEX is a lubricant with silicone and is used when installing plastic sleeve pipes. SUPERGLIDEX is snow-white and has a pleasant creamy consistency. Neutral pH value (approx. 7). Frost-proof. Provides easy and problem-free assembly of plastic sleeve pipes, rubber strips and gaskets. The content of silicone means that the pipe parts can be easily dismantled even after a long time, in addition to protecting the rubber gasket from drying out/darkening. Good adhesion in wet/moist environments. Frostproof to -10.

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Rust Protector Tectyl Multi Purpose Amber

Rust Protector Tectyl Multi Purpose Amber

Art. no.: 544232

Bearing grease sapphire

Bearing grease sapphire

Art. no.: 230651

With synthetic base oil. For high temperatures, -40° to +200°. For lubrication of bearings. Silicon free.

Paste lubricant-paste pro crc

Paste lubricant-paste pro crc

Art. no.: 228297

Anti-sieze agent paste. Built up of ceramic balls. For temperatures up to 1400°. Creates a corrosion protective film on steel that is sensitive to rust. Suitable as an insulative between different metals. Prevents burning and simplifies disassembly after a long period of use at high temperatures and after fixation by rusting on e.g. brakes, bolts and exhaust systems. Used for ovens or as a fixing spray when welding. Hazard marking: irritant, CRC 10718 = extremely flammable, irritant, environmentally hazardous.

Contact grease

Art. no.: 0650710

Reliable connections for aluminium wires can only be achieved in case the connection place is cleaned with a steel brush and lubricated with protective grease.
In plastic tube. Protects against oxidation and corrosion. Does not stiffen in the cold.

Vaselin white

Art. no.: 195836

For greasing of plastic and rubber components. Also suitable for impregnation of paper covers on electrical cables and as an outer vibration-damping filler in optic-fibre cable. 1 kg.

Lithium-based Fat CRC

Lithium-based Fat CRC

Art. no.: 157077

Lithium-based grease for roll- and slide bearings for high pressure and continuously high bearing temperatures.

Rust protection crc

Rust protection crc

Art. no.: 471211

Rustprotect Soft Seal is a long lasting rust protector for metal surfaces. Used as a long-term protection against rust and corrosion under difficult conditions, outdoors and indoors. Leaves a dry, wax-like film. Can be sprayed, dipped or painted on. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Cable Lubricant NN640

Cable Lubricant NN640

Art. no.: 1600407

Cable lubricant Polywater NN640.
Lubricant for power cables in tough conditions.

COLD GALVANIZATION RUST OLEUM

COLD GALVANIZATION RUST OLEUM

Art. no.: 377175

Zinc based products of very high industrial quality for the professional protection of bare steel or improvements on galvanized/zinc coated surfaces after sanding, welding and other processes. Grey matt look - 90% zinc in the dry film (99% pure zinc) - for the protection of bare steel, free from rust, and galvanized surfaces - Ideal for reformation of larger areas - is consistent with DIN 50.976 (1983) - Resists 430 hours of salt spray test (DIN) - heat resistant up to 100º C - Can be handled after 3 hours (at 20º C) - Covering ability: 10.5 m²/l

Thread oil tilia

Thread oil tilia

Art. no.: 2590005

Thread oil that is completely biodegradable, for threading, drilling and punching in all materials, such as stainless steel acid-resistant, aluminium, steel and others. The thread oil gives minimal friction resistance, less wear on tools, better threads and a higher surface finish. Has an extremely high lubricating and cooling effect.

Thread oil tilia

Friction coat. molykote d321r

Friction coat. molykote d321r

Art. no.: 242855

Usable in a wide temperature range. Quick drying. Hardens in the air after just a few minutes to an adhesive dry lubricating film. As the fixed lubricating layer, even at the highest surface pressure, prevents metallic contact, friction and where are considerably reduced. Good resistance to solvents. Good rust protection properties. Used in lubrication places with high loads and low gliding speeds, oscillating movements, intermittent operation where dry lubrication is desired, at extreme temperatures, when lubricating in a high vacuum, for improvement of running-in, for dry metal processing and for reducing dissonance during operation. Extremely flammable.

Cutting oil rocol rtd

Cutting oil rocol rtd

Art. no.: 260483

Dark liquid with high viscosity. Consists solely of high pressure additives. Silicon free. Does not contain mineral oil. For the most difficult reaming, threading and drilling operations..RTD Clean cut - completely synthetic. For aluminium and copper. Hazard labelling: 5 litres = Environmentally hazardous. 400 ml spray = Extremely flammable, environmentally hazardous. 300 ml spray = Extremely flammable, environmentally hazardous. 400 ml liquid = Environmentally hazardous.

Cutting oil rocol rtd

Cutting oil rocol rtd

Cutting fluid Tilia Universal

Cutting fluid Tilia Universal

Art. no.: 237260

Cutting fluid for machine cutting of most materials. Vegetable oil-based. Excellent cooling and lubricating properties. Intended to be diluted.

Glidexfittings greas

Glidexfittings greas

Art. no.: 8346010

Glidex fitting lubricant is DVGW-approved for drinking water and made of 100% clean, odourless silicone oil. Suitable for lubrication of O-rings in drinking water fittings and especially suited for EPDM and NBR rubber. Temperature load from -40 to +200^oC.

Silicone grease loctite 8104

Silicone grease loctite 8104

Art. no.: 4051208

Colourless silicone-based grease, with silica gel as a thickening agent. Temperature resistant up to + 200° C, suitable for lubrication of most plastics and elastomeric components.

LOCTITE LB 8104 is a colourless silicone-based lubricant, with silica gel as a thickening agent. It has a wide temperature range (up to + 200° C), and is suitable for lubrication of most plastics and elastomeric components. It has H1 NSF Registration Number 122981 and NLGI Class 2/3.

The advantages
Silicone grease
Valve and gasket grease
Wide temperature range, up to +200°C
For lubricating most plastics and elastomeric components
H1 NSF reg no.: 122981
NLGI class 2/3

Universal oil wd-40

Universal oil wd-40

Art. no.: 270803

Multi-spray that penetrates and dissolves rust, lubricates, repels damp, cleans and protects against rust. Labelling: harmful to health.

Universal oil wd-40

Universal oil wd-40

Universal oil wd-40

Universal oil wd-40

Rust-proof paint Ironside zinc spray

Rust-proof paint Ironside zinc spray

Art. no.: 377099

Anti-corrosive metal and heat-resistant to +450°C. High zinc content (95%). Re-paintable with acrylic based paints.
Equivalent to art. 124 235.

Hydraulic oil Q8 Haydn 46

Hydraulic oil Q8 Haydn 46

Art. no.: 318056

Q8 Haydn is an oil for being mobile and stationary
internal hydraulic system. Suitable for bearings,
Regulators, bevel gears and general circulation and
machine greasing. Contains Zinc
Antiwear additives (AW). The oils are even
Suitable for oil mist lubrication.

The advantages:
High natural viscosity index
Fulfils the highest requirement for filterability with
Hydraulic pump manufacturers
Good air and water separation powers
Good wear protection
Protects against rust and corrosion
good oxidisation stability and thermic
stability permits for longer oil change intervals
Minimal foaming

Linseed-oil boild

Linseed-oil boild

Art. no.: 4054115

Boiled linseed oil in plastic bottles.

Linseed-oil boild

Bearing grease foodlube grease

Bearing grease foodlube grease

Art. no.: 230653

White adhesive. Non-toxic. Does not contain mineral hydrocarbons. Withstands high loads. Reduces slippage. Resists water leaching and is therefore suitable for environments where cleaning is done often. Good rust protection properties. Food grade, U.SDA H1.

Silicone oil WD-40

Silicone oil WD-40

Art. no.: 377273

A classic silicone with WD-40 strong brand and with the superb solution Smart Straw.
Features and advantages:
- Smart Straw function
- Excellent lubrication
- Water repellent
- Friction damping
- Prevents rust and corrosion
- Temp. durability -35° C to 200° C
- Food grade NSF H2 #145374
Application areas: Belt, bearings, couplings, tools, pulleys, locks, hinges, etc.

Contact spray WD-40

Contact spray WD-40

Art. no.: 377276

A contact spray from WD-40 with the classical Smart Straw function.
Features and advantages:
- Smart Straw function
- Cleans oil, fluxing agent remains and condensation from sensitive
electronic and electric equipment
- Quick evaporation
- Leaves no residue
- Non-conductive formula
- Food grade NSF H2 #145372
Application areas: Printers, precision instruments, circuit boards, gearing, tools, all other electrical equipment that requires cleaning

Industrial silicone spray Ironside

Industrial silicone spray Ironside

Art. no.: 377105

Silicone oil that protects, lubricates plastic and rubber parts, and isolates surfaces with invisible, durable protective film. Works also as cable release agent etc.
Equivalent to 224 074.

Industrial silicone spray Ironside

Cutting fluid hysol 3505

Cutting fluid hysol 3505

Art. no.: 563836

The cutting liquid Hysol 3505 E is a mineral oil based microemulsion with very good technical characteristics. It is intended for light to medium metal working. Can be mixed with water. Hazard labelling: irritant.

Cutting fluid hysol 3505

Lubricant senco spray 520ml

Lubricant senco spray 520ml

Art. no.: 297317

Grease Senco spray for nail guns. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Lubricant senco spray 520ml

Cutting Fluid CRC Supercut

Cutting Fluid CRC Supercut

Art. no.: 563916

Assembly-paste

Art. no.: 471154

Universal grease, installation and start-up paste spray. Contains a combination of extremely pressure resistant fixed particles. Prevents wear, scratching and seizing. Simplifies installation of interference fits, seals and screws. It is recommended at slow slide movements under high pressure and a high temperature. Drive unit, open switches, torsion plates, rough controls, wire, etc.

Rust protection industry zinc

Rust protection industry zinc

Art. no.: 279594

A long-lasting rustproofing agent. Offers excellent properties when it comes to withstanding corrosion and mechanical wear & tear. Welded joints, screens, doors, beams, as well as other bodywork details. For improvement of damaged galvanised surfaces. 750 ml. Bulk. Labelling; environmentally hazardous.

Rust protection industry zinc

Rust protection dinitrol 77b

Rust protection dinitrol 77b

Art. no.: 132324

Dinitrol 77B stainless wax in golden brown, strong, drying wax film. Long term protection of about 50-70um. Suitable for vehicles, boats and other iron and steel objects stored or transported under severe corrosion conditions. Excellent for sea transport. Golden brown/transparent. Spray in 500 ml. Hazard labelling: Extremely flammable.

Rust protection dinitrol ml

Rust protection dinitrol ml

Art. no.: 180840

Dinitrol ML thin penetrating cavities liquid with extremely high creep capability. Film thickness of about 10 µm. Intended for enclosed cavities and the outside of the chassis and joints before finishing with thicker wear protection. Also for internal and external corrosion protection of other iron and steel objects to be stored or transported. Beige/Brown. Hazard labelling: Highly flammable.

Grease universal food grease

Grease universal food grease

Art. no.: 308232

Food-approved long-term acting mineral-based universal grease for machinery, controls, valves, chains, gear, couplings, etc. Good thermal and mechanical stability, protects against corrosion. NSF H1. Hazard labelling: Extremely flammable.

Grease universal food grease

Bearing grease epfood 8054

Bearing grease epfood 8054

Art. no.: 308234

Ball bearing for machines within the food industry NLGI-2. Good pressure resistance, contains white particles and PTFE. Protects against corrosion in damp and wet environments, cold storage, etc. Temperature range -30°C to +160°C NSF H1.

Bearing grease epfood 8054

Showing 52 of 177