Order lines: 0

Ahlsell Products Electric Installation equipment 11-1811bCable ducts, Furniture boxes

11bCable ducts, Furniture boxes

Installation channels

Mini and Supply channels

Security channels

Floor, Base and Corner ducts

Table pass-throughs

Floor installationsystem

Floor, Furniture and Socket boxes

Cable collector

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Supply duct LF20035

Supply duct LF20035

Art. no.: 1156627

Feeder channel for surface pipeline installation. Supplied complete with base and lid.

Supply duct LF20035

Supply duct LF20035

Earthing cable Quick connection

Schneider Electric

Earthing cable Quick connection

Art. no.: 1166990

Earthing cable for connection to CYB slave terminal, length 25 cm. With flat pin for earthing of lower section of duct or front. Suitable for 3-way master socket outlet and 2-way socket outlet CYB-PS.

Duct underpart for installation duct TEK-123

Schneider Electric

Duct underpart for installation duct TEK-123

Art. no.: 1161501

TEK-123 is made of self-locking rigid lead-free PVC. The lower section of duct is an unperforated variant for mounting on walls. The lower section of duct can be divided into four compartments with cable rack TTI-KH252 P. TEK-123 can be used both as supply cable duct and as installation duct with outlets and connections mounted. FrontLine socket and connection systems are suitable. For duct section is suitable for F80 Front

Adapter plate for attachment frame MP-Bolagen

Adapter plate for attachment frame MP-Bolagen

Art. no.: 1174644

Adapter board for 3xAMP, Keystone, Systimax or Lexcom data jacks. Supplemented with mounting frames AUD50.NP E1174646 or AUD50.NP-83 E1174698.

Device box MIB Frontline

Schneider Electric

Device box MIB Frontline

Art. no.: 1163646

Boxes for standard apparatus with screw distance c/c 60 mm. Distance between the screws are 71 mm. The box is snapped into the front opening of Thorsman service carrier with F80 front. To obtain extra coupling space MIB-J junction box is mounted on the side of the box.

Device box MIB Frontline

Slave socket CYB, 2-way

Schneider Electric

Slave socket CYB, 2-way

Art. no.: 1166960

Master terminal CYB, 2-way, for installation in Thorsman's installation ducts. The outlet is mounted without box and is quick-connected on any side of CYB 3-way master outlet. Can also be mounted with a 2-way outlet if the first outlet if the first outlet has connecting terminal or quick-connection adapter.

Slave socket CYB, 2-way

Insulated Mounting screw TFT-IS

Schneider Electric

Insulated Mounting screw TFT-IS

Art. no.: 1534909

Mounting screw in electro-galvanized hardened steel with insulating plastic washer on the screw head for use when installing single-insulated cable in DMT cable ducts. With extra pointed tip and high thread pitch. Equipped with Phillips No. 2 cross grooves.

Cable hiding self-closing

Schneider Electric

Cable hiding self-closing

Art. no.: 1159214

Self-closing cable cover for collecting wiring. The cables are laid by opening the cable cover. You do not need to thread the cables. Perfect accessory for stylish installations around the desk

Cable hiding self-closing

Mini trunking Ateha ATA20501

Mini trunking Ateha ATA20501

Art. no.: 1156502

Mini channel with a height of 20 mm and 2 compartments.
Pre-punched holes in the lower section of the channel.

Mini trunking Ateha ATA20501

Powerdot 79mm 1xSchucko, USB A+C

Forming Function

Powerdot 79mm 1xSchucko, USB A+C

Art. no.: 1177083

With the integrated Powerdot table socket, you have access to electricity, data and media in a stylish and simple way everywhere. When you need it, where you need it. Powerdot ties the room together with stylish charging in expected - and unexpected - places. The possibilities are endless.You decide where and how you want to be connected.

Powerdot PD16 is the outlet of the future where you get both the new standard in the form of a USB-C port and classic charging with an electrical outlet and a USB-A charger. The USB-C port can be used with an external charger for charging smartphones and compatible laptops, but it can also be combined with a docking station for power, screen, internet, mouse, keyboard, etc. with only one cable. The model also has two practical side holes for pulling out e.g. network cable or monitor cable. Don't forget to supplement with USB-C charger or a port replicator.

The Powerdot PD16 is easily mounted through the tabletop in a 79mm hole and is easily and securely screwed into place with a threaded ring under the tabletop, no electrician required.

Edge protection

Edge protection

Art. no.: 1132249

Edge protection strip with steel insert to cover cut sheet ends. Black, UV-resistant version.

Duct underparts TEK-100

Schneider Electric

Duct underparts TEK-100

Art. no.: 1161400

TEK-100 is made of self-locking rigid lead-free PVC. The lower section of duct is available in two variants, one with perforated back, TEK-100UH is for mounting fabricated walls or on spacer, and one unperforated TEK-100 U for mounting on walls. The lower section of duct can be divided into three compartments with cable-rack KH 252 P. TEK-100 can be used both as supply cable duct and as installation duct with outlets and connections mounted. FrontLine socket and connection systems are suitable. For duct section is suitable for F80 Front,

Duct underparts TEK-100

Blindlock 1/2-compartment S500

Blindlock 1/2-compartment S500

Art. no.: 1172440

Blind lid 50x50mm, covers half a compartment in the floor and wall boxes S500. For empty modules, provides space for future needs

Floor Box Standard

Floor Box Standard

Art. no.: 1172293

Floor boxes for installation floors, cavity joists, bolted or cast floors. The boxes can be equipped with single or double quick-connect sockets and/or data and media sockets as well as automatic fuses and earth-fault circuit breakers. Adjustable depth 70-100mm. To be able to close the lid with angled plugs connected, 75mm is required

Floor Box Standard

Floor Box Standard

Floor Box Standard

Cast-in box for Standard Floor Boxes

Cast-in box for Standard Floor Boxes

Art. no.: 1170506

Cast-in box for standard floor box. Prepared for VP and Flex pipes on all sides. Adjustable in depth 80 - 115mm.

Cast-in box for Standard Floor Boxes

Fixing strip for 1 cable without cover

Fixing strip for 1 cable without cover

Art. no.: 1178784

Mini channel with double-sided tape.

Fixing strip for 1 cable without cover

Mini trunking Optiline 1820, Schneider-Electric

Schneider Electric

Mini trunking Optiline 1820, Schneider-Electric

Art. no.: 1169605

OptiLine mini-duct for high- and low-voltage power lines; hole-punched bottom section. Plastic version approved for single-insulated cable. Please use a screw E1534909, which has an insulating collar. Tape installation only for low voltage. Removal requires tools. Available in lead- and cadmium-free PVC, halogen-free plastic, and aluminium

Mini trunking Optiline 1820, Schneider-Electric

Mini trunking Mini-Snap

Mini trunking Mini-Snap

Art. no.: 1155746

Open duct made of PVC with double-sided tape.
The cable is snapped into the duct.

Mini trunking Mini-Snap

Mini trunking Mini-Snap

Table modules POP-UP with power socket and data, Hager

Table modules POP-UP with power socket and data, Hager

Art. no.: 1157487

With the table module Pop-up, you have the ability to recess a power outlet, for example in cooking bench, cooking cabinet, desk or conference table. When you need an electrical connection, pull out the front of the module and connect your device. The table module is available in three standard variants. Data outlets that are in the modules are of the type Patch/patch, which means that you don’t need to contact the data outlet but connect the outlet directly with your finished data cables (patch cables).

Table modules POP-UP with power socket and data, Hager

Installation ducting TB 1010

Installation ducting TB 1010

Art. no.: 1179351

The cable space can be sectioned off using intermediate shelves. In the duct, there are grooves for the TBM 1 earthing plate. This duct cannot be installed on a wall rack.

Installation ducting TB 1010

Installation ducting TB 1310

Installation ducting TB 1310

Art. no.: 1179355

The cable space can be sectioned off using intermediate shelves. In the duct, there are grooves for the TBM 1 earthing plate.

Installation ducting TB 1310

End caps FED

Schneider Electric

Art. no.: 1160171

3-way socket BRx, Hager

3-way socket BRx, Hager

Art. no.: 1157028

Outlet is connected with input and output devices that are applied to power lines. For feeding between outlets/ workstations, it is advantageous to use pre-assembled lengths (energy bus). The 3-way outlet can also be connected directly with normal cables.
Input and output devices accept cable dimensions from 0.5 - 4 mm2
- G4041 is equipped with rotatable wells for use with e.g. vertically mounted ducts.
Material: Halogen-free plastic

3-way socket BRx, Hager

Input unit, Hager

Input unit, Hager

Art. no.: 1158250

Loose input unit for Hager’s Ergeribuss quick-connect system. The input unit is equipped with WAGO’s quick connection. For distribution of five-wire systems, use a 5-pole phase selector(G4700) or junction box in the duct.

Input unit, Hager

Device box Hager

Device box Hager

Art. no.: 1158302

Box for external products for BRx window ledge ducts. The boxes are attached over the front opening of the duct, and can easily be removed by pushing a fitting on the top edge of the box to the side.

Device box Hager

Installation ducting halogen-free WDK-H

Installation ducting halogen-free WDK-H

Art. no.: 1176954

Halogen-free installation ducts for high and low tension and for telecoms and data installations. Bottom hole for the quick-release mounting.
Made of PC/ABS. Colour: white RAL 9010. Supplied with cover, in 2-metre lengths. Can also be installed with partitions from WDK 40040 and larger.

Installation ducting halogen-free WDK-H

Installation ducting halogen-free WDK-H

Inner corner for Installation ducting halogen-free WDK-H

Inner corner for Installation ducting halogen-free WDK-H

Art. no.: 1176942

Inner corner, Halogen-free, polar white RAL 9010

Inner corner for Installation ducting halogen-free WDK-H

L-angle for Installation ducting halogen-free WDK-H

L-angle for Installation ducting halogen-free WDK-H

Art. no.: 1176944

L-angle, Halogen-free, polar white RAL 9010

L-angle for Installation ducting halogen-free WDK-H

End piece WDK-H halogen-free

End piece WDK-H halogen-free

Art. no.: 1176946

End piece, Halogen-free, polar white RAL 9010

End piece WDK-H halogen-free

Louvred grille

Art. no.: 1157328

Standard length: 2000 mm
Special length up to 6000 mm

Intermediate wall for wall channel BRA in halogen-free plastic

Intermediate wall for wall channel BRA in halogen-free plastic

Art. no.: 1158903

For ducts with height 65 mm, BRA/BRS

Intermediate wall for wall channel BRA in halogen-free plastic

Supply duct LF15015

Supply duct LF15015

Art. no.: 1156598

Feeder channel for surface pipeline installation. Complete with lower section, cover and required number of clamps.

Supply duct LF15015

Supply duct LF15015

Supply duct LF30060

Supply duct LF30060

Art. no.: 1156672

Feeder channel for surface pipeline installation.
Complete with lower section, cover and required number of clamps.

Supply duct LF30060

Supply duct LF40040

Supply duct LF40040

Art. no.: 1156674

Feeder channel for surface pipeline installation.
Complete with lower section, cover and required number of clamps.

Supply duct LF40040

Supply duct LF40090

Supply duct LF40090

Art. no.: 1156682

Feeder channel for surface pipeline installation.
Complete with lower section, cover and required number of clamps.

Supply duct LF40090

Supply duct LF40110

Supply duct LF40110

Art. no.: 1156684

Feeder channel for surface pipeline installation.
Complete with lower section, cover and required number of clamps.

Supply duct LF40110

Supply duct LF10010

Supply duct LF10010

Art. no.: 1156596

Feeder channel for surface pipeline installation. Complete with lower section, cover and required number of clamps. Supplied as standard in RAL colour 9010 (Mountain white).

Supply duct LF10010

Supply duct LF10010

Supply duct LFH - Halogen-free, LFH20020

Supply duct LFH - Halogen-free, LFH20020

Art. no.: 1156619

Halogen-free supply cable duct for surface-mounted cable laying.
Complete with lower section, cover and required number of clamps.

Supply duct LFH - Halogen-free, LFH20020

Supply duct LFH - Halogen-free, LFH20020

Supply duct LFH - Halogen-free, LFH20020

Supply duct LFH - Halogen-free, LFH30045

Supply duct LFH - Halogen-free, LFH30045

Art. no.: 1156666

Halogen-free supply cable duct for surface-mounted cable laying.
Complete with lower section, cover and required number of clamps.

Supply duct LFH - Halogen-free, LFH30045

Supply duct LFH - Halogen-free, LFH30045

Supply duct LFH - Halogen-free, LFH40060

Supply duct LFH - Halogen-free, LFH40060

Art. no.: 1156680

Halogen-free supply cable duct for surface-mounted cable laying.
Complete with lower section, cover and required number of clamps.

Supply duct LFH - Halogen-free, LFH40060

Supply duct LFH - Halogen-free, LFH40060

Supply duct LFH - Halogen-free, LFH60090

Supply duct LFH - Halogen-free, LFH60090

Art. no.: 1156688

Halogen-free supply cable duct for surface-mounted cable laying.
Complete with lower section, cover and required number of clamps.

Supply duct LFH - Halogen-free, LFH60090

Supply duct LFH - Halogen-free, LFH60090

Supply duct LFH - Halogen-free, LFH60110

Supply duct LFH - Halogen-free, LFH60110

Art. no.: 1156690

Halogen-free supply cable duct for surface-mounted cable laying. Complete with lower section, cover and required number of clamps.

Supply duct LFH - Halogen-free, LFH60110

Floor duct

Art. no.: 1155586

Plastic floor duct for easy cable laying

Supply ducts WDK, white

Supply ducts WDK, white

Art. no.: 1171522

Lead-free installation ducts for strong and weak current as well as telecom/data installations. Bottom hole for the quick-release mounting.
Can also be installed with partitions from WDK 40040 and larger.

Supply ducts WDK, white

Supply ducts WDK, white

Supply ducts WDK, white

Supply ducts WDK, white

Supply ducts WDK, white

Inner corner WDK, white

Inner corner WDK, white

Art. no.: 1171537

Inner corner for WDK channels.

Inner corner WDK, white

Inner corner WDK, white

Inner corner WDK, white

Inner corner WDK, white

Inner corner WDK, white

Outer corner WDK

Outer corner WDK

Art. no.: 1171551

Outer corner for changing the direction of the WDK channels.

Outer corner WDK

Outer corner WDK

Outer corner WDK

Outer corner WDK

Outer corner WDK

L-angle WDK, white,

L-angle WDK, white,

Art. no.: 1171565

L-angle for changing the direction of the WDK channels.

L-angle WDK, white,

L-angle WDK, white,

L-angle WDK, white,

L-angle WDK, white,

L-angle WDK, white,

T-piece WDK,

Art. no.: 1171579

T-piece for changing the direction of the WDK channels.

End caps WDK,

Art. no.: 1171593

End caps for closure of the WDK-H channels.

Intermediate wall WDK,

Intermediate wall WDK,

Art. no.: 1171608

Partition wall for mounting in WDK ducts E1171529-1171536

Supply ducts WDK, white with tape

Supply ducts WDK, white with tape

Art. no.: 1171619

Feeder channel with tape.

Supply ducts WDK, white with tape

Supply ducts WDK, white with tape

Supply ducts WDK, white with tape

Mini trunking with cover

Mini trunking with cover

Art. no.: 1171518

Made of white PVC with double-sided adhesive tape. Length 2 m.

Showing 52 of 275