Order lines: 0

Ahlsell Products ElectricE-mobility

E-mobility

Temporary charging points

Charging cables

Measuring instruments

Are you looking for solutions in e-mobility? Ahlsell helps you with products for charging solutions in solar, charging, and accessories. Regardless of whether you work with a public environment or private installations, we have the e-mobility range and charging solutions for your needs. Here you will find charging boxes, charging stations, foundations, and accessories for easy installation. Smart e-mobility charging products from the majority of major suppliers. Explore our wide range of e-mobility charging solutions here in the online store or visit your nearest Ahlsell store.

Charging adapter Schuko - T2 connector, 1-phase

Charging adapter Schuko - T2 connector, 1-phase

Art. no.: 2700774E

Charging adapter with charging cable T2 connector 5 meters long. Powered by 230V standard Schuko plug. Mode 2, charging power 3.7 kW, 1-phase charger. With Short circuit protection and DC fault monitoring + type A protection. The rubber cable is durable which gives you good protection against oil, UV light. The cable remains flexible in the cold. MODE 3 variant. Supplied in practical nylon bag with zip and 2 straps. CE approved, IP66 / IK10.

New in the online store

Charging cable T2 3-phase 11kW

Charging cable T2 3-phase 11kW

Art. no.: 2700771E

Charging cable for charging a plug-in hybrid/electric car. Fits socket type 2 on the car. The rubber cable is durable which gives you good protection against oil, UV light. The cable remains flexible in the cold. MODE 3 variant. Supplied in practical nylon bag with zip and 2 straps.

Charging cable T2 3-phase 11kW

HAN Module

Art. no.: 9860005

The HAN module for electricity meters from Kamstrup type OMNIPOWER. The module is plugged into the electricity meter and is used for, for example, reports of current from solar cells or wind turbines, load control of electric car chargers, monitoring of electricity consumption, etc. Ensure that the power grid company can activate the HAN Module.

Charging box Home Smart 11kW

Schneider Electric

Charging box Home Smart 11kW

Art. no.: 2700347

EVlink Home Smart is a compact charger for the home. It is easy to install, commission and use. The charger is equipped with a built-in DC monitoring protection. The home charger can be advantageously supplemented with the Peak Controller to activate dynamic load balancing that monitors the total power consumption in the house and optimizes charging against other loads. The home charger can also be connected to the Wiser by SE mobile app to easily control energy management in the home. Via the app, the charging can be started, controlled and monitored even remotely. To connect Evlink Home Smart to an external system, the OCPP 1.6 communication protocol can be used. It can also be connected to the home internet router, either via WiFi or RJ45 Ethernet cable.

Charging station 7.4-22 kW, 1P/3PN, T2S

Schneider Electric

Charging station 7.4-22 kW, 1P/3PN, T2S

Art. no.: 2700829

Schneider Charge is a wall-mounted charging station for electric vehicles that meets the IEC61851-1 standard.::The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -35°C to 55°C.::The output type is a T2S socket on the front of the charging station.::Nominal charging power is 22 kW.::The charging station is installed either single-phase (1P+N) three-phase (3P+N). The rated charging current is 16 A/32 A at 230 VAC/400 VAC and 50 Hz/60 Hz mains frequency.::It can be connected with a TN-S, TT or IT earth system.::The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside.:: Dimensions are (W) 244mm x (H) 352mm x (D) 117mm. Product weight is 3.2 kg. Color is white (RAL 9003) and green.::An LED indicator on the charging station changes color between red, green and blue to indicate the status directly on the charging station.::Together with the Schneider Charge Load Balancing Unit, it is possible to adjust in real time the maximum the power allocated to the charging vehicle, taking into account the other electricity consumption in the house and the size of the main fuses.::The communication protocol OCPP 1.6 can be used to connect the charging station to third-party cloud services and mobile applications.::For connection to the Internet either WiFi or RJ45 Ethernet cable is used . The IP degree of protection is IP55. The IK degree of protection is IK10. Operating temperature is -30°C to 55°C. Outlet type is 7 m fixed charging cable with T2 connector at the end. The cable starts from the underside in the middle of the charging station. Nominal output power is 11 kW. It is installed 3-phase (3P+N) with 16 A at 400 VAC and 50 Hz/60 Hz. It can be connected with a TN-S, TT or IT earth system. The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside The dimensions of the charging station are (W) 244 mm x (H) 352 mm x (D) 107 mm. The weight is 4.4 kg (without cable).

Charging station 7.4-22 kW, 1P/3PN, T2S

Metrel MI3155 Eurotest XDe

Metrel MI3155 Eurotest XDe

Art. no.: 4202058

The Eurotext XC “AUTO-TEST" revolutionises elapsed time when you test in accordance with the installation guidelines. It’s never been faster to test, measure, and document.

Functions:
Voltage and frequency. Shorting current, loop impedance; neutral, earth, and phase.
Tests all types of RCD - type AC, A, B, B+, and F, as well as tripping time and tripping current with a smart ramp function.
Low-ohm 7 and 200mA test on the protective conductor.
Insulation test with 50 - 1000VDC test voltage. 2- and 3-pole transfer resistance to earth. Specific earth resistance with ro-adapter (optional).
Earth resistance measurement with 2 pliers (optional).
Phase sequence display.
TRMS leak current and current measurement (optional).
First Fault leak current measurement and indicative resistance measurement (IT-systems).
Memory with unique ability to build a map structure.
Maps/measurements can be named directly on the screen on customer premises.

Swedish Windows software for quick, easy documentation with the ability to edit and add comments. Swedish help function that shows connection diagrams directly on the screen.

New simple navigation and documentation - With its large, clear colour touchscreen, you quickly get an overview of both tests and saved results. Navigation is easy, either by touching the screen, or with the intuitive keypad. Eurotest is the only model on the market that allows building up and editing an entire installation structure, both via the software and directly in the instrument. In addition, customer name, address, project name, etc. can be input directly into the instrument. With Eurolink for Android (optional), you can build installation structures and transfer data from your tester via Bluetooth. You can also take pictures, video, and audio recordings and connect them to specific measurements. The complete measurement report, with all documentation, can be transmitted from your smartphone or tablet. The installation tester does not need to be brought back to the office to download data; everything can be done wirelessly in the field.

Technical data
3-pole earth resistance
Measuring Range:
0-20-200-10kΩ
Resolution:
0.01-0.1-1Ω

Metrel MI3155 Eurotest XDe

Load balancing Balancer

DEFA e-mobility

Load balancing Balancer

Art. no.: 2700588

DEFA Balancer is a control unit for load balancing that optimizes the use of current where power is limited. The DEFA Balancer distributes the available power so that there is enough power both for everyday consumption and electric car charging. For consumption between 0 and 80A.

Charging cable 1- or 3-phase T2

Charging cable 1- or 3-phase T2

Art. no.: 2480424

Charging cable for charging the charging hybrid / electric car. Fits socket type 2 on the car. Cable length 5m meters, blue colored with black T2 connectors. MODE 3 variant.

Charging box 3-phase, fixed cable type-2 connector, without meter, JFB type A

Charging box 3-phase, fixed cable type-2 connector, without meter, JFB type A

Art. no.: 2449136

The charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of the main fuse tripping. Complete with GARO Modbus 1-phase / 3-phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions. JFB-A with DC monitoring and without electricity meter.

Charging box 3-phase, fixed cable type-2 connector, with meter

Charging box 3-phase, fixed cable type-2 connector, with meter

Art. no.: 2449137

GARO's charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of the main fuse tripping. Complete with GARO Modbus 1-phase / 3-phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions.

New in the online store

Charging box IQ HOME

Charging box IQ HOME

Art. no.: 2480195

eRange IQ for home charging is the charging station that has it all. It comes with a Type2 socket or fixed Type2 cable. It is designed for placement in private and semi-public environments and can be placed both outside and inside.

eRange IQ has built-in fully dynamic load balancing and provides maximum power for charging by utilizing the property's spare capacity. At the same time, full control over power consumption is given through a built-in, MID-approved energy meter and control over who uses the charging station through the RFID reader. It has built-in Type B functionality for earth-fault circuit breakers thanks to Type A earth-fault circuit breakers in combination with the DC-RCM protection.

eRange IQ can also be connected to the CloudCharge app so you can see consumption, receive alerts and control access via mobile. CloudCharge also gives you access to the Nordic region's largest network of destination chargers. To connect to CloudCharge, eRange IQ must be connected to the Internet. Fully dynamic load balancing works both online and offline. eRange IQ can be connected to the CloudCharge app.

Charging box IQ HOME

Test instrument for car charger, EV-Test

Test instrument for car charger, EV-Test

Art. no.: 4202707

Test electric car chargers. When you use a-collection's EV test adapter together with your test instrument, you easily and quickly check the electrical safety and functionality of EVSE chargers. The adapter is delivered with standard type 2 plug with simple settings and with rotary switch on the adapter, so you can easily simulate and select both PP and CP ventilated and non-ventilated status.

Current Clampmeter AC/DC True RMS

Current Clampmeter AC/DC True RMS

Art. no.: 4202459

The Elma 9400 is a completely unique instrument, as it combines AC and DC leakage current measurement in the mA range. In addition, the Elma 9400 has standard multimeter functions. The Elma 9400 is indispensable in the automotive, electronics and electrical industries because it uniquely combines AC and DC leakage current measurement, with high accuracy in the milliampere range. This means that the Elma 9400 can both be used to find the fault in the car that discharges during the weekend, the "old" AC leakage in the electrical installation as well as the DC component from the electronics, which saturates the earth fault circuit breaker, so that it does not trip and thus creates a dangerous situation. Elma 9400 can also be used to measure charging currents on e.g. smaller DC charging circuits with high accuracy, small consumers that shone on the car and much more. Elma 9400 covers almost all fronts. The Elma 9400 measures 0.1mA...10.00A DC and 0.1mA...20.00A AC and has standard multimeter functions such as voltage and resistance measurement. The instrument is CAT IV and is delivered ready for use in a case with batteries, test leads and manual.

Control unit Peak Controller 3f

Schneider Electric

Control unit Peak Controller 3f

Art. no.: 2700310

The EVlink Home Peak Controller is a controller for dynamic load balancing at home. It monitors the total power consumption in the house and optimizes charging against other loads in the property. Peak Controller is easy to both install and configure. The communication between the charging box and the control unit is PLC (Powerline Communication), which means that no extra cables are needed.

Charging box Njord Go 11kW Bundle

CTEK E-Mobility

Charging box Njord Go 11kW Bundle

Art. no.: 2700700E

NJORD® GO 11kW from CTEK is a durable, safe and all-in-one EV charger with type 2 connector and charging capacity of up to 11kW. NJORD® GO 11kW BUNDLE is delivered including a wall bracket (which is also available as an accessory, E-number 2480342). A fixed, durable 1.5m power cable and a fixed 5m EV charging cable. Simply plug the device into a CEE socket for charging. The charger's user interface clearly indicates charging status. The free CTEK app gives you complete control over charging and charge planning in your Android or IOS mobile via BLUETOOTH® and Wi-Fi. With the NJORD® GO 11kW, you can charge at high power even when the ambient temperature is high, thanks to its ultra-modern cooling technology with natural convection cooling.

Switch 5 ports a-switch 5P

Switch 5 ports a-switch 5P

Art. no.: 5171822

5-port unmanaged industrial Ethernet switch. Aluminum housing. Ambient temperature -10 ° C to + 70 ° C
Supply voltage 12-36 VDC
Standards and protocols
IEEE802.3 10 Base-T Ethernet Standard
IEEE802.3u 100Base-TX Fast Ethernet standard
IEEE802.3x for full duplex flow control and half duplex back pressure flow control
IEEE802.3ab Link Aggregation

Power unit Entity, Balance Basic

Power unit Entity, Balance Basic

Art. no.: 2701041

Entity Balance Basic Power unit equipped with: 2 HAN (RJ12, and RJ45) ports for connection to "smart energy meter". 1st Ethernet port (RJ45) for connection to network. 1st Wifi antenna SMA 90mm for WifiMesh to charging stations and/or Internet connection via Wifi. Connection terminals for current transformer 333mV (accessory).

Charging box 3-phase, socket type 2, with meter

Charging box 3-phase, socket type 2, with meter

Art. no.: 2449139

The charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of the main fuse tripping. Complete with GARO Modbus 1-phase / 3-phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions.

Charging box 3-phase, socket type 2, without meter, JFB type A

Charging box 3-phase, socket type 2, without meter, JFB type A

Art. no.: 2449138

The charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of the main fuse tripping. Complete with GARO Modbus 1-phase / 3-phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions. JFB-A with DC monitoring and without electricity meter.

Charging box Twin, 3-phase, with fixed cable

Charging box Twin, 3-phase, with fixed cable

Art. no.: 2480309

odular dual charge boxes for three-phase charging that can be built to the desired system through group formation, based on a master unit with WiFi card to which simpler charge boxes can be connected. Each socket is protected with DC fault protection and type A earth fault switch according to international standards. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of main fuse tripping. Supplement with GARO modbus energy meter in the power plant for activation of load balancing.

Charging box Twin, 3-phase, with fixed cable

Charging box 1-phase, socket type 2, M-bus meter

Charging box 1-phase, socket type 2, M-bus meter

Art. no.: 2449140

The charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety function required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of main fuse tripping. Supplement with GARO Modbus 1-phase / 3- phase energy meter in the power station for activating load balancing.The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions.
PSB-A with DC monitoring.

RFID tags, 5-pack

RFID tags, 5-pack

Art. no.: 2480117

RFID tags with or without ABB logo for authentication when charging with Terra AC charging box. Pack of 5

AC Charging Cable 20A T2-T2 typ

Phoenix Contact

AC Charging Cable 20A T2-T2 typ

Art. no.: 2700151

Mobile AC charging cable with type 2 to type 2, IEC 62196-2, 20 A / 480 V (AC), length: 5 m, black, straight

Charging & portal solution Power 22kW with load balancing

Charging & portal solution Power 22kW with load balancing

Art. no.: 9850032

Load and Portal solution for car dealer case with load balancing. The kit contains:
Wallbox 22kW
Load balancing device
Portal access

Charging & portal solution Power 22kW

Charging & portal solution Power 22kW

Art. no.: 9850031

Charging & portal solution Defas Power Charging box 22kW.
Set contents:
2700587, charging box Power 22KW T2-C, quantity 1
With portal solution

Installation cable EQLQ Easy Steer 450/750 V Dca, Nexans

Installation cable EQLQ Easy Steer 450/750 V Dca, Nexans

Art. no.: 0461490

The cable is intended for fixed installation indoors and outdoors. When laying in the ground, the cable must be provided with extra protection against mechanical damage. The cable is UV protected. EQLQ Easy is a halogen-free, HFFR-insulated, aluminum-bonded, HFFR-sheathed installation cable with round, solid copper conductors. The cable has a multi-wire conductor of tinplate copper under and in contact with the aluminum strip. EQLQ Easy is designed in accordance with SS 424 02 19-4 where applicable. The conductors have thread count and resistance according to IEC 60228 class 1. The parties are color-labeled according to SS 424 17 20. The jacket is labeled type / manufacturer / year + month / meter marking. The cable meets fire spread class D. UV protected according to HD626 S1 part 2.5.1. The conductor insulation must be protected against direct UV light that may occur, for example, in lighting fixtures and light signs. The cable is approved by SEMKO. Lifmark ™ permanent marking on the outer casing of the cable. The marking specifies in-depth plastic qualities and prepares for future recycling of the cable.
EQLQ Easy Controller: with two additional controllers for control.

Installation cable EQLQ Easy Steer 450/750 V Dca, Nexans

Post bracket Poleplate 330

Post bracket Poleplate 330

Art. no.: 2700020

Poleplate is made of Swedish steel and powder coated for the highest quality. Poleplate is intended for easy mounting of a charging box. Poleplate is manufactured in Sweden for the Nordic climate. It is delivered in powder coated design to withstand weather and wind. Charging box holder Poleplate is a cost-effective Poleplate facilitates, for example, when changing from engine heater location to charging location and can thus be used to replace an engine heater hood.

Hole image for Charge Amps Aura
For mounting on 60 mm post pipes
Robust construction in steel
Powder coated, can be delivered in different colors

Installation cable halogen-free FQLQ Easy ™ Control 450 / 750V Dca, Nexans

Installation cable halogen-free FQLQ Easy ™ Control 450 / 750V Dca, Nexans

Art. no.: 0468400

FQLQ Easy ™ Styr is a halogen-free, HFFR-insulated, aluminum-bonded, HFFR-sheathed installation cable with round wire-lined copper conductors. The cable also has a pair of steering copper conductors.

Installation cable halogen-free FQLQ Easy ™ Control 450 / 750V Dca, Nexans

Load Balancing Sch Charge 3P

Schneider Electric

Load Balancing Sch Charge 3P

Art. no.: 2700826

This load balancing unit used in addition to Schneider Charge to automatically protect household main fuses for overload.::It monitors and controls 3 phases.::The drive voltage of the unit is 220VAC to 230VAC with a tolerance of +/- 10% and handles 50Hz or 60Hz mains frequency ..::It regulates automatically and in real time the maximum power of the charging station, based on the size of the main fuse and other electricity consumption per phase in the installation.::Maximum size of the main fuse is 50A.::The unit must be installed indoors on a 35mm DIN rail.::The communicates with the charging station via power grid communication (PLC), which means that the charging station's connection cable for electricity is also used for the communication between the charging box and the load balancing unit.::An LED indicator shows the unit's status. Another LED indicator shows when the device is communicating with the charging station.::The dimensions of the device are (width) 72 mm x (height) 89 mm x (depth) 75 mm and it weighs 180 g. Color is white.::The device is made of plastic.::Operating temperature is -30°C to 50°C and storage temperature is -40°C to 85°C.::The device complies with standard EN 61010-1 (2010 edition) and EN61326-1 (2013 edition). Installed three-phase The unit is connected with 220 VAC or 230 VAC with a tolerance of +/- 10% and at mains frequency 50 Hz or 60 Hz. Controls the maximum power allocated to the charging vehicle, taking into account the other electricity consumption in the house and the size of the main fuses. Automatic control up to 50 A. Indoor installation on a 35 mm DIN rail. It communicates with the charging station via power grid communication (PLC), which means that the charging station's connection cable for electricity is also used for the communication between the charging box and the load balancing unit. An LED indicator shows the device's status. Another LED indicator shows when the device is communicating with the charging station. The dimensions of the device are (width) 72mm x (height) 89mm x (depth) 75mm and it weighs 180g. Color is white. It is made of plastic.

Charging box holder / Wall bracket Wallplate 250

Charging box holder / Wall bracket Wallplate 250

Art. no.: 2480368

Wallplate is a universal wall bracket for charging boxes. Wallplate provides a stable flat mounting surface even on uneven facades and minimizes stresses that can otherwise be created in the back of the charging box. Wallplate is designed to enable installation of different charging box models of different sizes. The integrated roof protects against Holes for each charging box are drilled directly in the bracket during assembly.

For wall mounting of charging box
• Facilitates installation on uneven facades
• Wiring can be routed behind the Wallplate
• Roof that protects the charging box from precipitation
• Powder coated

Wallplate fits the following chargers, among others:
ABB Terra AC Wallbox
Elinta HomeBox Slim
Ensto One
Garo GLB
Wallbox Pulsar
Easee
Charge Amps Halo

RFID tag black

CTEK E-Mobility

Art. no.: 2480037

RFID tag to prevent unauthorized charging, follows the MIFARE classic standard. The tag is easily added to the charging station via app, computer or Charge Portal. The RFID tag is black and is in a keychain design. Engraved CTEK logo on the front and a unique serial number on the back that is used for registration. Note that all CHARGESTORM CONNECTEDs support RFID by default.

Post for diffuser plate, for Electric Post Futura

Post for diffuser plate, for Electric Post Futura

Art. no.: 2449516

Post for fender board. Ø60 mm. Height 550 mm

Pipe pole with attaching plate, for Power pole Futura

Pipe pole with attaching plate, for Power pole Futura

Art. no.: 2449530

Pipe pole, Ø60 mm, with attachment plate, 200x200 mm. Height 750 mm. Conductive area, soft lead [mm²] 2x35.

Base plate for car heater panels

Saferoad Traffic

Base plate for car heater panels

Art. no.: 7778206

With a hot-dip galvanised pipe and through-passing cable inlet.

Base frame for LS4

Base frame for LS4

Art. no.: 2449896

Ground base plate accessories for LS4

Base plate for power pole

Base plate for power pole

Art. no.: 2449513

Foundation with post. Total length for both combined 0.9 meters.

RFID card charging box

RFID card charging box

Art. no.: 2449322

RFID card for charging box

Bluetooth Tångampm 9200BT

Bluetooth Tångampm 9200BT

Art. no.: 4202159

New super-compact instrument series, which with Bluetooth function and the free app Elma Link (iOS & Android) becomes a safe and flexible documentation tool. See your display directly on your Android / iOS device and perform the measurements at a safe distance from dangerous voltage. See and record "all values, curves and graphs directly on the phone. Save and attach photos and comments to the measurement and share, for example, via email."

Cord holder for a home charger

Cord holder for a home charger

Art. no.: 2449859

Cable holder for mounting on stand for charging boxes. Cord holder is mounted on stand GLB.

Universal foundation for charging posts

Universal foundation for charging posts

Art. no.: 2452227

Standardized pre-fab concrete foundation that fits all charging posts using a steel adapter between foundation and post. Ensures quality by being large and robust enough without tipping over. Ensures quality during installation so all ground work is done in the same way regardless of the model of the post. Saves costs when replacing the post during service maintenance or a new model. Saves costs by being able to prepare more sites with foundations, ground pipes and lids when other excavation-ground work takes place

Cast iron lid

Art. no.: 2452230

Cast iron protective cover for Unimi-1Base universal foundations. The cover is used to pre-install the foundation that is ready for a future installation of electric car chargers. The lid can withstand loads according to standard B-125. The lid is available with a specially designed logo in the middle for extra cost.

Adapter charging post LS4, 2003

Adapter charging post LS4, 2003

Art. no.: 2452228

Adapter in 6mm powder coated steel for mounting charging post Garo LS4 to Unimi-1Base AC foundation. The adapter makes it easy and fast to install charging posts and ensures that installation takes place with high quality and stability according to requirements EN61851-1 / EN61851-22. Installation with an adapter saves time and costs when servicing, repairing or upgrading to future models of charging posts. Fastening is done with an M12 bolt. The adapter breaks in the event of a collision to protect the foundation.

WLAN communication card, Wifi

WLAN communication card, Wifi

Art. no.: 2449141

GLB-WLAN is a module that can be mounted in GARO's charging box to activate smart functions such as: Scheduled charging, access control with RFID, load control, dynamic load balancing in groups, etc. Can be connected to a local network or as an access point to access the settings in charging box.

Charging box T2FK 22 DC MM WL

Charging box T2FK 22 DC MM WL

Art. no.: 2449182

Charging box Type2 fixed cable 22 kW personal protection switch type A with DC fault monitoring, meter and WLAN.

Charging box EV outlet 22kW DC fault monitoring

Charging box EV outlet 22kW DC fault monitoring

Art. no.: 2449183

Charging box EV socket 22kW DC fault monitoring with meter WLAN.

Pole mount double mounting

Pole mount double mounting

Art. no.: 2449176

Pole bracket is used to mount double charging boxes or a charging box of the type GLB. The pole bracket is equipped with a terminal block for further feeding. The product is designed to facilitate conversion of poles from the engine heater outlet. Pole attachment also has the option of installing various accessories on mounting plate. Mounting plate and other components can be ordered as accessories.

Charging box 1-phase, socket type 2, with meter

Charging box 1-phase, socket type 2, with meter

Art. no.: 2449135

Charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of main fuse tripping. Supplement with GARO Modbus 1-phase / 3- phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions. PSB-A with DC monitoring. "

Charging box Twin, 3-phase, with socket

Charging box Twin, 3-phase, with socket

Art. no.: 2480300

Modular dual charge boxes for three-phase charging that can be built to the desired system through group formation, based on a master unit with WiFi card to which simpler charge boxes can be connected. Each socket is protected with DC fault protection and type A earth fault switch according to international standards. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of main fuse tripping. Supplement with GARO modbus energy meter in the power plant for activation of load balancing.

Charging box Twin, 3-phase, with socket

Post bracket 60 mm load box GTB

Post bracket 60 mm load box GTB

Art. no.: 2480330

Double charging boxes can be mounted on a wall or post. The wall mounting is done either directly or with the accessory GTB wall bracket, which is recommended, for example, if cables come from the top of the wall. The post bracket is available for both a round 60 mm post and GARO's oval post.

Sign P E19 / Laddpl T24 200x400

Hammarprodukter

Sign P E19 / Laddpl T24 200x400

Art. no.: 0670041

Sign P E19 / Charging site T24. Blue with white and red text, normal reflective foil.

Sign Charging site T24 400x400mm

Hammarprodukter

Sign Charging site T24 400x400mm

Art. no.: 0670047

Sign with text:" Only vehicle with ongoing charging ". Blue with white text, normal reflective foil.

Pipe post Unimi-1base 60mm

Pipe post Unimi-1base 60mm

Art. no.: 2445596

Pipe post 60 mm Unimi-1base adapter 1100 mm high above ground. For attachment to Unimi-1base. Fits most charging boxes that are intended to be attached to 60 mm pipes.

Showing 52 of 141