Ahlsell
Order lines: 0
Quick order
AhlsellProductsElectricE-mobilityWall boxes AC

Wall boxes AC

Home charging of electric cars is becoming increasingly popular. At Ahlsell, you can find wall boxes and charging stations from several well-known brands. Smart and safe charging wall boxes ensure efficient charging. With dynamic load balancing, electric car charging solutions have been expanded at home. Additional smart features, such as cloud services, can also be added to charging boxes. The charging boxes for electric cars at home can be customized in a number of ways. Charging boxes, for instance, provide higher power and faster charging. Electric car charging solutions should fit a variety of vehicle connectors. Learn more about our solutions here, in our online store.

Products (42)
Charging box package PRO 2.0 4m spiral cable
PhaseBox
Charging box package PRO 2.0 4m spiral cable
Art. no.: 2700794
In the new PhaseBox 2.0, we have thought carefully about load balancing WiFi connection. It is not intended that the installer should have to work with the end customer's network and settings. This makes many people shy away from working with charging boxes at all. We have therefore removed the uncertainty around installing a charging box by completely replacing WiFi for load balancing with an automatic radio connection. The technology around the new load balancing in PhaseBox 2.0 is patent pending. We have developed a radio link that sends the values ​​from the supply completely independent of the end customer's network. Either to a charging box, or several charging boxes, for example in a BRF. The radio link is very powerful and reaches hundreds of meters. It can handle brick walls and metal cabinets without any problems. PhaseLink has sockets for energy meters on the supply, both for RJ45 and RJ12 in the same unit. All to make it easy to work with. You can easily check that the radio link is working directly in the charging box.

**Main fuse**
You set the main fuse with a rotary switch in the charging box. This means that you do not need to connect to any network to set the main fuse, you just turn it so that the correct LED lights up. After that, the load balancing works completely autonomously and automatically.

If you are going to install several boxes, just make sure that they all have the same address on the DIP switches. It doesn't get simpler and safer than that.

PhaseBox 2.0 has full phase balancing and phase switching. The result is that more cars can be charged on a certain supply,
Charging box package PRO 2.0 4m spiral cable
Charging box Duo 2x7.4 kW, Smart
Eldon Installation
Charging box Duo 2x7.4 kW, Smart
Art. no.: 2700367
Our charging boxes include everything and are developed together with installers. The charging box has a built-in MID-approved energy meter, personal protection switch type A with DC monitoring and that it is pre-configured, which facilitates installation. Our charging boxes have Type 2 sockets that provide up to 22 kW charging power with 3 -phase variant. It gives 11 miles per hour. Our charging boxes are also rated IK10 and IP54 for extreme conditions.
The charging boxes offer two different smart connections. We offer OCPP connected devices as well as EpSpot connected devices. The OCPP units are suitable for public charging stations and EpSpot, for example, is developed for multi-family housing but also for the public, as they offer charging via Swish.
We have a variety of accessories that make your charging station easier. The charging boxes are prepared for wall mounting (standard) or they can be mounted on a pole (optional). It is also possible to mount two charging boxes back to back on a post, which can provide up to 4 charging points.
Charging box Duo 2x7.4 kW, Smart
Charging box IQ HOME
Charging box IQ HOME
Art. no.: 2480197
eRange IQ for home charging is the charging station that has it all. It comes with a Type2 socket or fixed Type2 cable. It is designed for placement in private and semi-public environments and can be placed both outside and inside.

eRange IQ has built-in fully dynamic load balancing and provides maximum power for charging by utilizing the property's spare capacity. At the same time, full control over power consumption is given through a built-in, MID-approved energy meter and control over who uses the charging station through the RFID reader. It has built-in Type B functionality for earth-fault circuit breakers thanks to Type A earth-fault circuit breakers in combination with the DC-RCM protection.

eRange IQ can also be connected to the CloudCharge app so you can see consumption, receive alerts and control access via mobile. CloudCharge also gives you access to the Nordic region's largest network of destination chargers. To connect to CloudCharge, eRange IQ must be connected to the Internet. Fully dynamic load balancing works both online and offline. eRange IQ can be connected to the CloudCharge app.
Charging box IQ HOME
Charging box 1x22kW, eHome5
Eldon Installation
Charging box 1x22kW, eHome5
Art. no.: 2700969
eHome5 is a stylish and powerful charging box with an outlet. Perfectly adapted for private use in a villa. This charging box provides the opportunity to charge the electric car quickly and safely, while also being able to benefit from green energy from solar panels. eHome5 offers three smart charging modes to maximize efficiency and save money, solely via solar energy, solar and mains combination and with maximum power. The charging current can be set between 6-32A via the user app. Protection and monitoring against welded contacts. Other: Earth fault circuit breakers or personal protection switches must always be installed in the charger's connection point. Protocol acc. OCPP 1.6J. As an accessory, there is the energy meter, CEMC21, for load balancing.
Charging station 11kW, 3P+N, 7 m cable
Schneider Electric
Charging station 11kW, 3P+N, 7 m cable
Art. no.: 2700827
Schneider Charge is a wall-mounted charging station for electric vehicles that meets the IEC61851-1 standard.::The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -35°C to 55°C.::The output type is a 7 m fixed charging cable with a T2 socket at the end.::Nominal charging power is 11 kW.::The charging station is installed three-phase (3P+N). The rated charging current is 16 A at 400 VAC and 50 Hz/60 Hz mains frequency.::It can be connected with a TN-S, TT or IT earth system.::The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside.:: Dimensions are (W) 244mm x (H) 352mm x (D) 107mm. Product weight is 5.1 kg (without cable). Color is white (RAL 9003) and green.::An LED indicator on the charging station changes color between red, green and blue to indicate the status directly on the charging station.::Together with the Schneider Charge Load Balancing Unit, it is possible to adjust in real time the maximum the power allocated to the charging vehicle, taking into account the other electricity consumption in the house and the size of the main fuses.::The communication protocol OCPP 1.6 can be used to connect the charging station to third-party cloud services and mobile applications.::For connection to the Internet either WiFi or RJ45 Ethernet cable is used . The IP degree of protection is IP55. The IK degree of protection is IK10. Operating temperature is -35°C to 55°C. Outlet type is 5 m fixed charging cable with T2 connector at the end. The cable starts from the underside in the middle of the charging station. Nominal output power is 11 kW. It is installed 3-phase (3P+N) with 16 A at 400 VAC and 50 Hz/60 Hz. It can be connected with a TN-S, TT or IT earth system. The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside The dimensions of the charging station are (W) 244 mm x (H) 352 mm x (D) 107 mm. The weight is 5.1 kg (without cable).
Charging station 11kW, 3P+N, 7 m cable
Charging station 7.4-22 kW, 1P/3PN, T2S
Schneider Electric
Charging station 7.4-22 kW, 1P/3PN, T2S
Art. no.: 2700829
Schneider Charge is a wall-mounted charging station for electric vehicles that meets the IEC61851-1 standard.::The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -35°C to 55°C.::The output type is a T2S socket on the front of the charging station.::Nominal charging power is 22 kW.::The charging station is installed either single-phase (1P+N) three-phase (3P+N). The rated charging current is 16 A/32 A at 230 VAC/400 VAC and 50 Hz/60 Hz mains frequency.::It can be connected with a TN-S, TT or IT earth system.::The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside.:: Dimensions are (W) 244mm x (H) 352mm x (D) 117mm. Product weight is 3.2 kg. Color is white (RAL 9003) and green.::An LED indicator on the charging station changes color between red, green and blue to indicate the status directly on the charging station.::Together with the Schneider Charge Load Balancing Unit, it is possible to adjust in real time the maximum the power allocated to the charging vehicle, taking into account the other electricity consumption in the house and the size of the main fuses.::The communication protocol OCPP 1.6 can be used to connect the charging station to third-party cloud services and mobile applications.::For connection to the Internet either WiFi or RJ45 Ethernet cable is used . The IP degree of protection is IP55. The IK degree of protection is IK10. Operating temperature is -30°C to 55°C. Outlet type is 7 m fixed charging cable with T2 connector at the end. The cable starts from the underside in the middle of the charging station. Nominal output power is 11 kW. It is installed 3-phase (3P+N) with 16 A at 400 VAC and 50 Hz/60 Hz. It can be connected with a TN-S, TT or IT earth system. The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside The dimensions of the charging station are (W) 244 mm x (H) 352 mm x (D) 107 mm. The weight is 4.4 kg (without cable).
Charging box Duo Smart
Eldon Installation
Charging box Duo Smart
Art. no.: 2700097
The charging box has a built-in MID-approved energy meter, personal protection switch type A with DC monitoring and that it is pre-configured, which facilitates installation. Our charging boxes have Type 2 sockets that give up to 22kW charging power with the 3-phase variant, which gives 11 miles per hour. 1 -phase variant produces up to 7.4kW, which gives 3.7 miles per hour. Our charging boxes are also rated IK10 and IP54 for extreme conditions. All our charging boxes are smart and future-proof with OCPP 1.6J. The owner has the option to choose the operator freely .

We have a variety of accessories that make your charging station easier. The charging boxes are prepared for wall mounting (standard) or they can be mounted on a pole (optional). It is also possible to mount two charging boxes back to back on a post, which can provide up to 4 charging points.

- Developed and produced in Nässjö
- Charging power can be regulated between 1.8 - 22kW
- Choose between 1-phase or 3-phase
- Dynamic load balancing
- LAN connection
- RFID reader (on some models)
- DC monitoring
- Built-in protection with personal protection switch type A
- Built-in MID-approved energy meter
- Pre-configured (on some models)
- IK10 and IP54
- System lock
- Status indicator LED
- Connection possibility on incoming terminal 2.5-25 mm² Al/Cu
- Easy to sew on with double terminal block up to 25 mm² Al/Cu
- The communication cable is sewn on with a daisy chain
- Fits all electric cars
- Matching pole and cable holder are available as accessories.
Charging box Duo SmartCharging box Duo Smart
Charging box One Combo, Smart home package
Eldon Installation
Charging box One Combo, Smart home package
Art. no.: 2700093
Home package - Charging box One.Combo 13.8kW Smart with 7.5 meter cable and energy meter for load balancing. Supplied with Monta.

Our charging boxes include everything and are developed together with installers. The charging box has a built-in MID-approved energy meter, personal protection switch type A with DC monitoring and that it is preconfigured, which facilitates installation. Our charging boxes have Type 2 sockets that provide up to 22kW charging power with the 3-phase variant. That gives 11 miles per hour. Our charging boxes are also rated IK10 and IP54 for extreme conditions. All our charging boxes are smart and future-proof with OCPP 1.6J.

Our villa charging boxes are pre-configured with Monta, which allows the user to control the charging box with Monta's app. When you use Monta, your charging point can become a new source of income, open up your charger to the public and decide who, when and at what price they have access. The development of more and new smart functions takes place gradually. You get the new functions automatically when the charging box is updated or when Monta's app is updated.

We have a variety of accessories that make your charging station easier. The charging boxes are prepared for wall mounting (standard) or they can be mounted on a pole (optional).

The ELBC316KEM has a 7.5 meter cable, which gives the preset value 13.8kW.
The extra current outlet provides a static 10A.

- Developed and produced in Nässjö
- Charging power can be regulated between 1.8 - 22kW
- Static load balancing
- Dynamic load balancing (included)
- LAN connection
- RFID reader (on some models)
- DC monitoring
- Built-in protection with personal protection switch type A
- Built-in MID-approved energy meter
- OCPP 1.6J
- Pre-configured with Monta
- App controlled
- Make your charging box public and create a source of income
- IK10 and IP54
- Lock
- Status indicator LED
- Connection possibility on incoming terminal 2.5-25 mm² Al/Cu
- Easy to sew on with double terminal block up to 25 mm² Al/Cu
- The communication cable is sewn on with a daisy chain
- Fits all electric cars
- Matching pole and cable holder are available as accessories.
Charging box Halo 11 kW S OCPP
Charge-Amps
Charging box Halo 11 kW S OCPP
Art. no.: 2700224
Halo is an 11 kW AC charger with a 7.5 m fixed cable and an extra schuko socket. The charging box can be connected via LAN or Wifi to Charge Amps Cloud. Together with Charge Amps Amp Guard or Enegic, dynamic load balancing is enabled.

Halo OCPP can be connected to its own cloud service
Extra schuko socket
OCPP - Open Charge Point Protocol
Charging current: 6–32 A 1-phase per outlet
Voltage: 230/400 V
Operating temperatures: -35 °C to +45 °C
Charging standard: Mode 3
Internet connection: WiFi, LAN
Ground fault circuit breaker: DC protection built into the charger. An external type A RCD is required
Energy measurement: 3-phase volts, current and power (corresponding to the Measuring Instruments Directive 2014/32/EU)
IP rating: IP 66
IK classification: IK 10
Cable: Type 2, 7.5m long cable
Material: recycled aluminum
Charging box One Combo 13.8kW Smart
Eldon Installation
Charging box One Combo 13.8kW Smart
Art. no.: 2700606
Home package - Charging box One.Combo 13.8kW Smart with outlet and energy meter for load balancing. Supplied with Monta.

Our charging boxes include everything and are developed together with installers. The charging box has a built-in MID-approved energy meter, personal protection switch type A with DC monitoring and that it is preconfigured, which facilitates installation. Our charging boxes have Type 2 sockets that provide up to 22kW charging power with the 3-phase variant. That gives 11 miles per hour. Our charging boxes are also rated IK10 and IP54 for extreme conditions.

Our villa charging boxes are pre-configured with Monta, which allows the user to control the charging box with Monta's app. When you use Monta, your charging point can become a new source of income, open up your charger to the public and decide who, when and at what price they have access. The development of more and new smart functions takes place gradually. You get the new functions automatically when the charging box is updated or when Monta's app is updated.

We have a variety of accessories that make your charging station easier. The charging boxes are prepared for wall mounting (standard) or they can be mounted on a pole (optional).

The ELBC316EM has a type2 socket, which gives the preset value 13.8kW. (20A)
The extra current outlet provides a static 10A.

- Developed and produced in Nässjö
- Charging power can be regulated between 1.8 - 22kW
- Dynamic load balancing
- LAN connection
- RFID reader (on some models)
- DC monitoring
- Built-in protection with personal protection switch type A
- Built-in MID-approved energy meter
- Pre-configured with Monta
- App controlled
- Make your charging box public and create a source of income
- IK10 and IP54
- Lock
- Status indicator LED
- Connection possibility on incoming terminal 2.5-25 mm² Al/Cu
- Easy to sew on with double terminal block up to 25 mm² Al/Cu
- The communication cable is sewn on with a daisy chain
- Fits all electric cars
- Matching pole and cable holder are available as accessories.
Charging box Aura OCPP 4G RCD
Charge-Amps
Charging box Aura OCPP 4G RCD
Art. no.: 2700791E
Charge Amps Aura is an AC charger with 2 sockets and the possibility of up to 22kW AC per socket, RFID and built-in RCD type B and MCBs per socket. To install this product it is recommended that you go through the Charge Amps Academy, here you will find Charge Amps Academy: https://www.chargeamps.com/sv/academy/. This training is helpful to ensure correct installation of the device. then there is a fee) to Charge Amps Cloud or directly via OCPP to any OCPP compatible CPMS (Charge Point Management System). Dynamic load balancing is possible in Charge Amps Cloud. For larger installations it is possible to chain power and LAN cable to facilitate installation The charging box can be connected to an external CPMS with API or via a proxy solution, CEaaS (Charging efficiency as a service) via Charge Amps Cloud to utilize Charge Amps Cloud for load balancing. When connecting directly via OCPP to a CPMS other than Charge Amps Cloud, the external CPMS needs to offer dynamic load balancing.

Always register the product via the Charge Amps Partner Portal, create an account to the Charge Amps Partner Portal before starting the configuration: https://my.charge.space/partner
Configuration of the Charge Amps Aura can be done via smart phone, tablet or computer.

Compatible with:
Charge Amps Pole Mount for Charge Amps Aura, E-no: 2445545
Charge Amps Dual Pole Mount for Charge Amps Aura E-no: 2445603
Charge Amps Beam 22 kW 6 meters Type 2 E-no: 2700402
Charge Amps Beam 13.8 kW 6 meters Type 2, E-no: 2700400
Charge Amps Beam 7.4 kW 6 meters Type 2, E-nr: 2700401
Charge Amps Cable holder E-no: 2700448
Aura OCPP RCD
Charge-Amps
Aura OCPP RCD
Art. no.: 2700792E
Charge Amps Aura is an AC charger with 2 sockets and the possibility of up to 22kW AC per socket, RFID and built-in RCD type B and MCBs per socket. To install this product it is recommended that you go through the Charge Amps Academy, here you will find Charge Amps Academy : https://www.chargeamps.com/sv/academy/ This training is helpful to ensure the correct installation of the device Compatible CPMS (Charge Point Management System). Dynamic load balancing is enabled in Charge Amps Cloud. For larger installations, it is possible to chain power and LAN cables to facilitate the installation. The charging box can be connected to an external CPMS with API or via a proxy solution, CEaaS (Charging efficiency as a service) via Charge Amps Cloud to use Charge Amps Cloud for load balancing. When connecting directly via OCPP to a CPMS other than Charge Amps Cloud, the external CPMS needs to offer dynamic load balancing.

Always register the product via the Charge Amps Partner Portal, create an account to the Charge Amps Partner Portal before starting the configuration: https://my.charge.space/partner
Configuration of the Charge Amps Aura can be done via smart phone, tablet or computer.

Compatible with:
Charge Amps Pole Mount for Charge Amps Aura, E-no: 2445545
Charge Amps Dual Pole Mount for Charge Amps Aura E-no: 2445603
Charge Amps Beam 22 kW 6 meters Type 2 E-no: 2700402
Charge Amps Beam 13.8 kW 6 meters Type 2, E-no: 2700400
Charge Amps Beam 7.4 kW 6 meters Type 2, E-nr: 2700401
Charge Amps Cable holder E-no: 2700448
Charging box package PRO 2.0 8m straight cable
PhaseBox
Charging box package PRO 2.0 8m straight cable
Art. no.: 2700793
In the new PhaseBox 2.0, we have thought carefully about load balancing WiFi connection. It is not intended that the installer should have to work with the end customer's network and settings. This makes many people shy away from working with charging boxes at all. We have therefore removed the uncertainty around installing a charging box by completely replacing WiFi for load balancing with an automatic radio connection. The technology around the new load balancing in PhaseBox 2.0 is patent pending. We have developed a radio link that sends the values ​​from the supply completely independent of the end customer's network. Either to a charging box, or several charging boxes, for example in a BRF. The radio link is very powerful and reaches hundreds of meters. It can handle brick walls and metal cabinets without any problems. PhaseLink has sockets for energy meters on the supply, both for RJ45 and RJ12 in the same unit. All to make it easy to work with. You can easily check that the radio link is working directly in the charging box.

**Main fuse**
You set the main fuse with a rotary switch in the charging box. This means that you do not need to connect to any network to set the main fuse, you just turn it so that the correct LED lights up. After that, the load balancing works completely autonomously and automatically.

If you are going to install several boxes, just make sure that they all have the same address on the DIP switches. It doesn't get simpler and safer than that.

PhaseBox 2.0 has full phase balancing and phase switching. The result is that more cars can be charged on a certain supply,
Charging box package PRO 2.0 8m straight cable
Charging box Luna - 22kW 3P 32A
Charge-Amps
Charging box Luna - 22kW 3P 32A
Art. no.: 2700889
Charge Amps Luna is a charging box with a charging capacity of up to 22kW AC. A well-thought-out and smart design, with a compact shape and secured to meet future needs, this is the charger that fits perfectly into everyday life at home. Charge Amps Luna gives you the opportunity to use simple and smart functions for optimal home charging.

To install this product, you are advised to complete the Charge Amps Academy. You can find the Charge Amps Academy here - https://www.chargeamps.com/sv/academy/
Always register the product in the Charge Amps Partner Portal, create an account to the Charge Amps Partner Portal before starting the configuration: https://my.charge.space/partner
Configuration of the Charge Amps Luna can be done via a smartphone, tablet or computer. Charge Amps Luna can be installed via the Charge Amps installer app (Andriod or Iphone)


The charging box can be connected with Wifi or 4G LTE (built-in SIM, mobile connection included for 24 months, after which a fee is added) to Charge Amps Cloud. Together with Charge Amps Amp Guard or Enegic, dynamic load balancing is enabled. The charging box can connect to an external CPMS (Charge Point management System) via API to Charge Amps Cloud to utilize Charge Amp's load balancing or directly via OCPP to any OCPP compatible CPMS. When connecting directly to another CPMS (than Charge Amps Cloud), the external CPMS needs to offer dynamic load balancing.

Charge Amps Luna comes with a silver front as standard, but can be changed by purchasing a light or dark front. The front can be changed by the user, without special instructions.
Charging box Entity Home 14 5M-S
Garo
Charging box Entity Home 14 5M-S
Art. no.: 2700955
Entity Home Charging box. 5-year warranty in SE. A future-proof charging box that contains all parts: Installation console, charging unit and front. Entity Home has a fixed 5m type 2 cable. RFID reader. Built-in electronic meter. Built-in RCD function with all-pole mechanical switch for AC&DC faults that meets all requirements according to IEC62955. The boxes in the Entity family can communicate with each other via Ethernet or Wifi-Mesh. Connects to the internet via Ethernet or Wifi. The box has a PLC chip for communication that is prepared for communication according to ISO15118. Via future software upgrades, functions such as Plug&Charge can be realized. Entity Home shares a platform with Entity Compact and thus uses the same installation console. ATTENTION! Complete charging box.
Back plate/blind cover charging box
easee
Back plate/blind cover charging box
Art. no.: 2700552
With Easee Ready (backplate and blind cover) you can prepare for a future charging point at a low cost. To upgrade to a full-fledged charging point, you can purchase Easee Plug & Play (Chargeberry and front cover in any color) at any time. You can perform the upgrade yourself, thanks to our innovative Plug & Play technology. This allows you to easily scale up the system without additional installation costs.

Charging needs can change over time. Therefore, it should be easy and affordable to expand the charging system. The charging robot acts as an intelligent junction box and supports the expansion of multiple charging stations on the same cable. This allows you to easily scale up the system when the need for charging changes.

More reasons to choose Easee Ready
Prepared charging point at a low cost.
Supports expansion, more charging robots on the same cable.
Available for both Easee Home and Easee Charge.
Developed and manufactured in Norway.
Charging box Bundle Luna+Amp Guard
Charge-Amps
Charging box Bundle Luna+Amp Guard
Art. no.: 2701088E
This is a bundling of a Charge Amps Luna and a Charge Amps Amp Guard.

Charge Ampa Luna is a charging box with a charging capacity of up to 22 kW AC charging, a well-thought-out and smart design, a compact form, secured to meet future needs, this future-proof charger integrates naturally into your everyday life. Simplicity and intelligence for an optimal charging experience at home. Charge Amps Luna together with Charge Amps Amp Guard enables dynamic load balancing and maximizes your electric car charging, without blowing any fuses. All for a faster, safer and problem-free charging experience. A Charge Amps Luna and a Charge Amps Amp Guard are the perfect combination for a home installation.

To install these products you should go through the Charge Amps Academy. Charge Amps Academy can be found here - https://www.chargeamps.com/sv/academy/

Always register the product via the Charge Amps Partner Portal, create an account for the Charge Amps Partner Portal before starting the configuration: https://my.charge.space/partner
Configuration of Charge Amps Luna and Charge Amps Amps Guard can be done via smartphone, tablet or computer.

The charging box can be connected with Wifi or 4G LTE (built-in SIM, mobile connection included for 24 months after that there is a fee) to Charge Amps Cloud, and together with Charge Amps Amp Guard dynamic load balancing is enabled. The charging box can connect to an external CPMS (Charge Point Management System) via API or a proxy solution (CEaaS) to Charge Amps Cloud to utilize Charge Amps load balancing or directly via OCPP to any OCPP compatible CPMS. When connecting directly to a CPMS other than Charge Amps Cloud, the external CPMS needs to offer dynamic load balancing.

Charge Amps Luna is delivered with a silver front as standard, but can be replaced by purchasing a light or dark front. The front can be replaced by the user without special instructions.
5-year warranty.
Showing 42 of 42