Order lines: 0

Ahlsell Products ElectricE-mobility

E-mobility

Temporary charging points

Charging cables

Measuring instruments

Are you looking for solutions in e-mobility? Ahlsell helps you with products for charging solutions in solar, charging, and accessories. Regardless of whether you work with a public environment or private installations, we have the e-mobility range and charging solutions for your needs. Here you will find charging boxes, charging stations, foundations, and accessories for easy installation. Smart e-mobility charging products from the majority of major suppliers. Explore our wide range of e-mobility charging solutions here in the online store or visit your nearest Ahlsell store.

Products (145)

HAN Module

Art. no.: 9860005

The HAN module for electricity meters from Kamstrup type OMNIPOWER. The module is plugged into the electricity meter and is used for, for example, reports of current from solar cells or wind turbines, load control of electric car chargers, monitoring of electricity consumption, etc. Ensure that the power grid company can activate the HAN Module.

Charging box package PRO 2.0 4m spiral cable

Charging box package PRO 2.0 4m spiral cable

Art. no.: 2700794

In the new PhaseBox 2.0, we have thought carefully about load balancing WiFi connection. It is not intended that the installer should have to work with the end customer's network and settings. This makes many people shy away from working with charging boxes at all. We have therefore removed the uncertainty around installing a charging box by completely replacing WiFi for load balancing with an automatic radio connection. The technology around the new load balancing in PhaseBox 2.0 is patent pending. We have developed a radio link that sends the values from the supply completely independent of the end customer's network. Either to a charging box, or several charging boxes, for example in a BRF. The radio link is very powerful and reaches hundreds of meters. It can handle brick walls and metal cabinets without any problems. PhaseLink has sockets for energy meters on the supply, both for RJ45 and RJ12 in the same unit. All to make it easy to work with. You can easily check that the radio link is working directly in the charging box.

**Main fuse**
You set the main fuse with a rotary switch in the charging box. This means that you do not need to connect to any network to set the main fuse, you just turn it so that the correct LED lights up. After that, the load balancing works completely autonomously and automatically.

If you are going to install several boxes, just make sure that they all have the same address on the DIP switches. It doesn't get simpler and safer than that.

PhaseBox 2.0 has full phase balancing and phase switching. The result is that more cars can be charged on a certain supply,

Charging box package PRO 2.0 4m spiral cable

Charging box 3-phase, fixed cable type-2 connector, DC fault protection, meter and Wifi

Charging box 3-phase, fixed cable type-2 connector, DC fault protection, meter and Wifi

Art. no.: 2480343

Charging box GLB type 2 fixed cable 7.5 meters 22kW with DC fault protection, meter and WiFi, for three-phase charging. The charging box has a communication card to activate many smart extra functions. New functions are made available via regular software upgrades.

Can be supplemented with RFID reader. They are always protected against DC fault currents according to international standards. The charging box is prepared for dynamic load balancing in several levels, it automatically reduces the vehicle's charging current and thus protects the main fuse. Complete with GARO Modbus 1-phase / 3-phase energy meter in the control panel for activation.

Power unit Entity, Balance Basic

Power unit Entity, Balance Basic

Art. no.: 2701041

Entity Balance Basic Power unit equipped with: 2 HAN (RJ12, and RJ45) ports for connection to "smart energy meter". 1st Ethernet port (RJ45) for connection to network. 1st Wifi antenna SMA 90mm for WifiMesh to charging stations and/or Internet connection via Wifi. Connection terminals for current transformer 333mV (accessory).

Charging box 3-phase, fixed cable type-2 connector, without meter, JFB type A

Charging box 3-phase, fixed cable type-2 connector, without meter, JFB type A

Art. no.: 2449136

The charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of the main fuse tripping. Complete with GARO Modbus 1-phase / 3-phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions. JFB-A with DC monitoring and without electricity meter.

RFID tag EV2, 5-pack

RFID tag EV2, 5-pack

Art. no.: 2700574

RFID tags can be used for local access control on GARO's charging products that have RFID readers.

PhaseBox RFID reader with OCPP 1.6J + 2 cards

PhaseBox RFID reader with OCPP 1.6J + 2 cards

Art. no.: 2700797

RFID reader to activate charging on the PhaseBox One charging box. A good way to prevent someone unauthorized charging the charging box. A typical use is a company with a number of charging boxes in a common parking lot. Employees with electric cars can, for example, start charging regardless of which charging box they park at. Settings for phase optimization and charging current can be set on users' tiles. All loads are presented in an overview in the PhaseBox portal and can be downloaded as Excel or PDF. Including two RFID tags. Possibility to link settings: Yes

PhaseBox RFID reader with OCPP 1.6J + 2 cards

Charging box Twin, 3-phase, with socket

Charging box Twin, 3-phase, with socket

Art. no.: 2480300

Modular dual charge boxes for three-phase charging that can be built to the desired system through group formation, based on a master unit with WiFi card to which simpler charge boxes can be connected. Each socket is protected with DC fault protection and type A earth fault switch according to international standards. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of main fuse tripping. Supplement with GARO modbus energy meter in the power plant for activation of load balancing.

Charging box Twin, 3-phase, with socket

Charging box Njord Go 11kW Bundle

CTEK E-Mobility

Charging box Njord Go 11kW Bundle

Art. no.: 2700700E

NJORD® GO 11kW from CTEK is a durable, safe and all-in-one EV charger with type 2 connector and charging capacity of up to 11kW. NJORD® GO 11kW BUNDLE is delivered including a wall bracket (which is also available as an accessory, E-number 2480342). A fixed, durable 1.5m power cable and a fixed 5m EV charging cable. Simply plug the device into a CEE socket for charging. The charger's user interface clearly indicates charging status. The free CTEK app gives you complete control over charging and charge planning in your Android or IOS mobile via BLUETOOTH® and Wi-Fi. With the NJORD® GO 11kW, you can charge at high power even when the ambient temperature is high, thanks to its ultra-modern cooling technology with natural convection cooling.

Charging & portal solution Power 22kW with load balancing

Charging & portal solution Power 22kW with load balancing

Art. no.: 9850032

Load and Portal solution for car dealer case with load balancing. The kit contains:
Wallbox 22kW
Load balancing device
Portal access

Charging box 3-phase, fixed cable type-2 connector, with meter

Charging box 3-phase, fixed cable type-2 connector, with meter

Art. no.: 2449137

GARO's charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of the main fuse tripping. Complete with GARO Modbus 1-phase / 3-phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions.

Charging box 1-phase, socket type 2, with meter

Charging box 1-phase, socket type 2, with meter

Art. no.: 2449135

Charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of main fuse tripping. Supplement with GARO Modbus 1-phase / 3- phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions. PSB-A with DC monitoring. "

Charging box Duo 2x7.4 kW, Smart

Eldon Installation

Charging box Duo 2x7.4 kW, Smart

Art. no.: 2700367

Our charging boxes include everything and are developed together with installers. The charging box has a built-in MID-approved energy meter, personal protection switch type A with DC monitoring and that it is pre-configured, which facilitates installation. Our charging boxes have Type 2 sockets that provide up to 22 kW charging power with 3 -phase variant. It gives 11 miles per hour. Our charging boxes are also rated IK10 and IP54 for extreme conditions.
The charging boxes offer two different smart connections. We offer OCPP connected devices as well as EpSpot connected devices. The OCPP units are suitable for public charging stations and EpSpot, for example, is developed for multi-family housing but also for the public, as they offer charging via Swish.
We have a variety of accessories that make your charging station easier. The charging boxes are prepared for wall mounting (standard) or they can be mounted on a pole (optional). It is also possible to mount two charging boxes back to back on a post, which can provide up to 4 charging points.

Charging box Duo 2x7.4 kW, Smart

Charging adapter Schuko - T2 connector, 1-phase

Charging adapter Schuko - T2 connector, 1-phase

Art. no.: 2700774E

Charging adapter with charging cable T2 connector 5 meters long. Powered by 230V standard Schuko plug. Mode 2, charging power 3.7 kW, 1-phase charger. With Short circuit protection and DC fault monitoring + type A protection. The rubber cable is durable which gives you good protection against oil, UV light. The cable remains flexible in the cold. MODE 3 variant. Supplied in practical nylon bag with zip and 2 straps. CE approved, IP66 / IK10.

Load Balancing Amp- P1 Package

Load Balancing Amp- P1 Package

Art. no.: 2700549

The Easee Equalizer Amp is a cost-effective and user-friendly measuring device, designed to provide the data needed to balance the energy between the building and the electric car charger. It connects to the Easee Equalizer and together they fix everything from dynamic load balancing to charging the car with solar energy.

Because electric car charging requires a lot of energy, it must be distributed smartly in the building. In places without smart electricity meters, this has only been possible by making expensive upgrades to the fuse box. It is even worse if you also want to use solar cells, wind turbines or other renewable energy sources.

With the Equalizer and Equalizer Amp we solve this, with products that take minutes to install and even less time to set up.

With the Equalizer and the Easee app you can charge your car exclusively with energy from your own roof.

You choose whether you want to charge with solar energy, from the electricity grid – or both.

The Easee Equalizer Amp is a measuring instrument and accessory for the Easee Equalizer P1. The Easee Equalizer Amp is a cost-effective and easy-to-install power meter that is optimized to provide the necessary energy balancing data between the building and the EV charger, in addition to everything needed to use solar cells to charge EVs.

With Equalizer and Equalizer Amp, you can make the most of solar cells and other renewable energy sources.

Our user-friendly technology means you don't have to make expensive infrastructure upgrades or invest in increased capacity.

Don't have a smart meter? No problem. Equalizer and Equalizer Amp give you everything you need to arrange charging directly from the solar cells.

Avoid expensive infrastructure upgrades. Equalizer together with Equalizer Amp can control the energy in the building and hundreds of chargers - dynamically and easily.

All our products are designed for quick and easy installation. It only takes a couple of minutes.

Metrel MI3155 Eurotest XDe

Metrel MI3155 Eurotest XDe

Art. no.: 4202058

The Eurotext XC “AUTO-TEST" revolutionises elapsed time when you test in accordance with the installation guidelines. It’s never been faster to test, measure, and document.

Functions:
Voltage and frequency. Shorting current, loop impedance; neutral, earth, and phase.
Tests all types of RCD - type AC, A, B, B+, and F, as well as tripping time and tripping current with a smart ramp function.
Low-ohm 7 and 200mA test on the protective conductor.
Insulation test with 50 - 1000VDC test voltage. 2- and 3-pole transfer resistance to earth. Specific earth resistance with ro-adapter (optional).
Earth resistance measurement with 2 pliers (optional).
Phase sequence display.
TRMS leak current and current measurement (optional).
First Fault leak current measurement and indicative resistance measurement (IT-systems).
Memory with unique ability to build a map structure.
Maps/measurements can be named directly on the screen on customer premises.

Swedish Windows software for quick, easy documentation with the ability to edit and add comments. Swedish help function that shows connection diagrams directly on the screen.

New simple navigation and documentation - With its large, clear colour touchscreen, you quickly get an overview of both tests and saved results. Navigation is easy, either by touching the screen, or with the intuitive keypad. Eurotest is the only model on the market that allows building up and editing an entire installation structure, both via the software and directly in the instrument. In addition, customer name, address, project name, etc. can be input directly into the instrument. With Eurolink for Android (optional), you can build installation structures and transfer data from your tester via Bluetooth. You can also take pictures, video, and audio recordings and connect them to specific measurements. The complete measurement report, with all documentation, can be transmitted from your smartphone or tablet. The installation tester does not need to be brought back to the office to download data; everything can be done wirelessly in the field.

Technical data
3-pole earth resistance
Measuring Range:
0-20-200-10kΩ
Resolution:
0.01-0.1-1Ω

Metrel MI3155 Eurotest XDe

Charging cable T2 3-phase 22kW

Charging cable T2 3-phase 22kW

Art. no.: 2700772E

Charging cable for charging a plug-in hybrid/electric car. Fits socket type 2 on the car. The rubber cable is durable which gives you good protection against oil, UV light. The cable remains flexible in the cold. MODE 3 variant. Supplied in practical nylon bag with zip and 2 straps.

Charging cable T2 3-phase 22kW

Cable hook Entity, Wall

Cable hook Entity, Wall

Art. no.: 2701024E

You attach the Entity Wallhook easily to a wall or post to neatly and easily hang up your charging cable when you are not using it.

Charging box IQ HOME

Charging box IQ HOME

Art. no.: 2480197

eRange IQ for home charging is the charging station that has it all. It comes with a Type2 socket or fixed Type2 cable. It is designed for placement in private and semi-public environments and can be placed both outside and inside.

eRange IQ has built-in fully dynamic load balancing and provides maximum power for charging by utilizing the property's spare capacity. At the same time, full control over power consumption is given through a built-in, MID-approved energy meter and control over who uses the charging station through the RFID reader. It has built-in Type B functionality for earth-fault circuit breakers thanks to Type A earth-fault circuit breakers in combination with the DC-RCM protection.

eRange IQ can also be connected to the CloudCharge app so you can see consumption, receive alerts and control access via mobile. CloudCharge also gives you access to the Nordic region's largest network of destination chargers. To connect to CloudCharge, eRange IQ must be connected to the Internet. Fully dynamic load balancing works both online and offline. eRange IQ can be connected to the CloudCharge app.

Charging box IQ HOME

Installation cable EQLQ Easy Steer 450/750 V Dca, Nexans

Installation cable EQLQ Easy Steer 450/750 V Dca, Nexans

Art. no.: 0461490

The cable is intended for fixed installation indoors and outdoors. When laying in the ground, the cable must be provided with extra protection against mechanical damage. The cable is UV protected. EQLQ Easy is a halogen-free, HFFR-insulated, aluminum-bonded, HFFR-sheathed installation cable with round, solid copper conductors. The cable has a multi-wire conductor of tinplate copper under and in contact with the aluminum strip. EQLQ Easy is designed in accordance with SS 424 02 19-4 where applicable. The conductors have thread count and resistance according to IEC 60228 class 1. The parties are color-labeled according to SS 424 17 20. The jacket is labeled type / manufacturer / year + month / meter marking. The cable meets fire spread class D. UV protected according to HD626 S1 part 2.5.1. The conductor insulation must be protected against direct UV light that may occur, for example, in lighting fixtures and light signs. The cable is approved by SEMKO. Lifmark ™ permanent marking on the outer casing of the cable. The marking specifies in-depth plastic qualities and prepares for future recycling of the cable.
EQLQ Easy Controller: with two additional controllers for control.

Installation cable EQLQ Easy Steer 450/750 V Dca, Nexans

AC Charging Cable 20A T2-T2 typ

Phoenix Contact

AC Charging Cable 20A T2-T2 typ

Art. no.: 2700151

Mobile AC charging cable with type 2 to type 2, IEC 62196-2, 20 A / 480 V (AC), length: 5 m, black, straight

Charging box EV outlet 22kW DC fault monitoring

Charging box EV outlet 22kW DC fault monitoring

Art. no.: 2449183

Charging box EV socket 22kW DC fault monitoring with meter WLAN.

Charging box 1x22kW, eHome5

Eldon Installation

Charging box 1x22kW, eHome5

Art. no.: 2700969

eHome5 is a stylish and powerful charging box with an outlet. Perfectly adapted for private use in a villa. This charging box provides the opportunity to charge the electric car quickly and safely, while also being able to benefit from green energy from solar panels. eHome5 offers three smart charging modes to maximize efficiency and save money, solely via solar energy, solar and mains combination and with maximum power. The charging current can be set between 6-32A via the user app. Protection and monitoring against welded contacts. Other: Earth fault circuit breakers or personal protection switches must always be installed in the charger's connection point. Protocol acc. OCPP 1.6J. As an accessory, there is the energy meter, CEMC21, for load balancing.

Voltage tester Elma 2200X

Voltage tester Elma 2200X

Art. no.: 4202602

Elma 2200X - CAT IV. Voltage / throughput / phase sequence tester.

With the Elma 2200X, Elma reinvents the voltage tester once again. The Elma 2200X has all the features you recognize from the Elma 2100X, but comes with test leads in extra strong quality. In addition, the instrument housing is in a stronger and more robust design. You can load the measuring point. It provides both the possibility of discharging the induced ghost voltage at the measuring point and for a simple JFB test, when the load is 30mA at 230V.

Never before have there been so many smart and well-thought-out functions in a simple voltage tester, which makes it perfect for most electrician assignments, L-AUS work and the establishment of a voltage-free system, where it is required to use an instrument that complies with the voltage test directive.

Voltage test, 2-pole with LEDs 12… 1,000V AC / DC
Voltage measurement with digital display 6… 1,000V / 1,500V AC / DC
Review test
Resistance measurement 0-1999Ω
Pole finder, single-pole voltage test that indicates the phase
Phase sequence / rotation field test, 2-pole for 3-phase network
Large clear illuminated display and highly efficient LEDs
Self-test and auto on / off function
Warning with diode in case of dangerous voltage without battery - for L-AUS work.
Complies with the voltage test directive for control of de-energized system
Very strong permanently mounted cables
Interchangeable test tips 2 / 4mm
Built-in powerful flashlight

Delivered including belt bag, Elma 2200X complies with IEC 61010-1 CAT IV 600V / IEC 61243-3: 2014 and is delivered complete with batteries and guidance.

Charging cable holder Daytona T2

Charging cable holder Daytona T2

Art. no.: 2480356

Charging cable holder Daytona T2. A flexible and stylish holder for charging cable for electric car made of steel. Daytona T2 is intended to be mounted on a wall or on post pipes. The charging cable holder is designed by Next Green and manufactured in Sweden for the Nordic climate. It is delivered in powder-coated design light gray - RAL7004 To be mounted on post pipes Ø60 mm, the accessory staple kit is needed.

Made of 2mm sheet metal
Powder coated
Mounting on 60 pipes
DIN rail with connection point
Easy installation
Prepared for mounting earth leakage circuit breakers
270mm mounting surface
Delivered partially assembled "

Switch 5 ports a-switch 5P

Switch 5 ports a-switch 5P

Art. no.: 5171822

5-port unmanaged industrial Ethernet switch. Aluminum housing. Ambient temperature -10 ° C to + 70 ° C
Supply voltage 12-36 VDC
Standards and protocols
IEEE802.3 10 Base-T Ethernet Standard
IEEE802.3u 100Base-TX Fast Ethernet standard
IEEE802.3x for full duplex flow control and half duplex back pressure flow control
IEEE802.3ab Link Aggregation

Load balancing Balancer

DEFA e-mobility

Load balancing Balancer

Art. no.: 2700588

DEFA Balancer is a control unit for load balancing that optimizes the use of current where power is limited. The DEFA Balancer distributes the available power so that there is enough power both for everyday consumption and electric car charging. For consumption between 0 and 80A.

Mounting plate floor

Mounting plate floor

Art. no.: 2480030

Mounting plate in steel is used for those installations that require floor mounting in concrete or similar solid material. The bracket has four pre-drilled holes, is supplemented with a 60mm pipe and a post bracket for complete floor installation. The 60mm seat tube (accessory) is attached to the mounting plate with three supplied bolts.

RFID tags, 5-pack

RFID tags, 5-pack

Art. no.: 2480117

RFID tags with or without ABB logo for authentication when charging with Terra AC charging box. Pack of 5

Charging station 11kW, 3P+N, 7 m cable

Schneider Electric

Charging station 11kW, 3P+N, 7 m cable

Art. no.: 2700827

Schneider Charge is a wall-mounted charging station for electric vehicles that meets the IEC61851-1 standard.::The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -35°C to 55°C.::The output type is a 7 m fixed charging cable with a T2 socket at the end.::Nominal charging power is 11 kW.::The charging station is installed three-phase (3P+N). The rated charging current is 16 A at 400 VAC and 50 Hz/60 Hz mains frequency.::It can be connected with a TN-S, TT or IT earth system.::The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside.:: Dimensions are (W) 244mm x (H) 352mm x (D) 107mm. Product weight is 5.1 kg (without cable). Color is white (RAL 9003) and green.::An LED indicator on the charging station changes color between red, green and blue to indicate the status directly on the charging station.::Together with the Schneider Charge Load Balancing Unit, it is possible to adjust in real time the maximum the power allocated to the charging vehicle, taking into account the other electricity consumption in the house and the size of the main fuses.::The communication protocol OCPP 1.6 can be used to connect the charging station to third-party cloud services and mobile applications.::For connection to the Internet either WiFi or RJ45 Ethernet cable is used . The IP degree of protection is IP55. The IK degree of protection is IK10. Operating temperature is -35°C to 55°C. Outlet type is 5 m fixed charging cable with T2 connector at the end. The cable starts from the underside in the middle of the charging station. Nominal output power is 11 kW. It is installed 3-phase (3P+N) with 16 A at 400 VAC and 50 Hz/60 Hz. It can be connected with a TN-S, TT or IT earth system. The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside The dimensions of the charging station are (W) 244 mm x (H) 352 mm x (D) 107 mm. The weight is 5.1 kg (without cable).

Charging station 11kW, 3P+N, 7 m cable

Sign P E19 / Laddpl T24 200x400

Hammarprodukter

Sign P E19 / Laddpl T24 200x400

Art. no.: 0670041

Sign P E19 / Charging site T24. Blue with white and red text, normal reflective foil.

Charging cable T2 3-phase 11kW

Charging cable T2 3-phase 11kW

Art. no.: 2700771E

Charging cable for charging a plug-in hybrid/electric car. Fits socket type 2 on the car. The rubber cable is durable which gives you good protection against oil, UV light. The cable remains flexible in the cold. MODE 3 variant. Supplied in practical nylon bag with zip and 2 straps.

Charging cable T2 3-phase 11kW

Charging station 7.4-22 kW, 1P/3PN, T2S

Schneider Electric

Charging station 7.4-22 kW, 1P/3PN, T2S

Art. no.: 2700829

Schneider Charge is a wall-mounted charging station for electric vehicles that meets the IEC61851-1 standard.::The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -35°C to 55°C.::The output type is a T2S socket on the front of the charging station.::Nominal charging power is 22 kW.::The charging station is installed either single-phase (1P+N) three-phase (3P+N). The rated charging current is 16 A/32 A at 230 VAC/400 VAC and 50 Hz/60 Hz mains frequency.::It can be connected with a TN-S, TT or IT earth system.::The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside.:: Dimensions are (W) 244mm x (H) 352mm x (D) 117mm. Product weight is 3.2 kg. Color is white (RAL 9003) and green.::An LED indicator on the charging station changes color between red, green and blue to indicate the status directly on the charging station.::Together with the Schneider Charge Load Balancing Unit, it is possible to adjust in real time the maximum the power allocated to the charging vehicle, taking into account the other electricity consumption in the house and the size of the main fuses.::The communication protocol OCPP 1.6 can be used to connect the charging station to third-party cloud services and mobile applications.::For connection to the Internet either WiFi or RJ45 Ethernet cable is used . The IP degree of protection is IP55. The IK degree of protection is IK10. Operating temperature is -30°C to 55°C. Outlet type is 7 m fixed charging cable with T2 connector at the end. The cable starts from the underside in the middle of the charging station. Nominal output power is 11 kW. It is installed 3-phase (3P+N) with 16 A at 400 VAC and 50 Hz/60 Hz. It can be connected with a TN-S, TT or IT earth system. The charging station is easy to install (no special tools required). It is recommended for private use in the home, installed in the garage or on the wall outside The dimensions of the charging station are (W) 244 mm x (H) 352 mm x (D) 107 mm. The weight is 4.4 kg (without cable).

Test instrument for car charger, EV-Test

Test instrument for car charger, EV-Test

Art. no.: 4202707

Test electric car chargers. When you use a-collection's EV test adapter together with your test instrument, you easily and quickly check the electrical safety and functionality of EVSE chargers. The adapter is delivered with standard type 2 plug with simple settings and with rotary switch on the adapter, so you can easily simulate and select both PP and CP ventilated and non-ventilated status.

Post for diffuser plate, for Electric Post Futura

Post for diffuser plate, for Electric Post Futura

Art. no.: 2449516

Post for fender board. Ø60 mm. Height 550 mm

Pipe pole with attaching plate, for Power pole Futura

Pipe pole with attaching plate, for Power pole Futura

Art. no.: 2449530

Pipe pole, Ø60 mm, with attachment plate, 200x200 mm. Height 750 mm. Conductive area, soft lead [mm²] 2x35.

Base plate for car heater panels

Saferoad Traffic

Base plate for car heater panels

Art. no.: 7778206

With a hot-dip galvanised pipe and through-passing cable inlet.

Base frame for LS4

Base frame for LS4

Art. no.: 2449896

Ground base plate accessories for LS4

Base plate for power pole

Base plate for power pole

Art. no.: 2449513

Foundation with post. Total length for both combined 0.9 meters.

RFID card charging box

RFID card charging box

Art. no.: 2449322

RFID card for charging box

Bluetooth Tångampm 9200BT

Bluetooth Tångampm 9200BT

Art. no.: 4202159

New super-compact instrument series, which with Bluetooth function and the free app Elma Link (iOS & Android) becomes a safe and flexible documentation tool. See your display directly on your Android / iOS device and perform the measurements at a safe distance from dangerous voltage. See and record "all values, curves and graphs directly on the phone. Save and attach photos and comments to the measurement and share, for example, via email."

Cord holder for a home charger

Cord holder for a home charger

Art. no.: 2449859

Cable holder for mounting on stand for charging boxes. Cord holder is mounted on stand GLB.

Universal foundation for charging posts

Universal foundation for charging posts

Art. no.: 2452227

Standardized pre-fab concrete foundation that fits all charging posts using a steel adapter between foundation and post. Ensures quality by being large and robust enough without tipping over. Ensures quality during installation so all ground work is done in the same way regardless of the model of the post. Saves costs when replacing the post during service maintenance or a new model. Saves costs by being able to prepare more sites with foundations, ground pipes and lids when other excavation-ground work takes place

Cast iron lid

Art. no.: 2452230

Cast iron protective cover for Unimi-1Base universal foundations. The cover is used to pre-install the foundation that is ready for a future installation of electric car chargers. The lid can withstand loads according to standard B-125. The lid is available with a specially designed logo in the middle for extra cost.

Adapter charging post LS4, 2003

Adapter charging post LS4, 2003

Art. no.: 2452228

Adapter in 6mm powder coated steel for mounting charging post Garo LS4 to Unimi-1Base AC foundation. The adapter makes it easy and fast to install charging posts and ensures that installation takes place with high quality and stability according to requirements EN61851-1 / EN61851-22. Installation with an adapter saves time and costs when servicing, repairing or upgrading to future models of charging posts. Fastening is done with an M12 bolt. The adapter breaks in the event of a collision to protect the foundation.

WLAN communication card, Wifi

WLAN communication card, Wifi

Art. no.: 2449141

GLB-WLAN is a module that can be mounted in GARO's charging box to activate smart functions such as: Scheduled charging, access control with RFID, load control, dynamic load balancing in groups, etc. Can be connected to a local network or as an access point to access the settings in charging box.

Installation cable halogen-free FQLQ Easy ™ Control 450 / 750V Dca, Nexans

Installation cable halogen-free FQLQ Easy ™ Control 450 / 750V Dca, Nexans

Art. no.: 0468400

FQLQ Easy ™ Styr is a halogen-free, HFFR-insulated, aluminum-bonded, HFFR-sheathed installation cable with round wire-lined copper conductors. The cable also has a pair of steering copper conductors.

Installation cable halogen-free FQLQ Easy ™ Control 450 / 750V Dca, Nexans

Charging box T2FK 22 DC MM WL

Charging box T2FK 22 DC MM WL

Art. no.: 2449182

Charging box Type2 fixed cable 22 kW personal protection switch type A with DC fault monitoring, meter and WLAN.

Pole mount double mounting

Pole mount double mounting

Art. no.: 2449176

Pole bracket is used to mount double charging boxes or a charging box of the type GLB. The pole bracket is equipped with a terminal block for further feeding. The product is designed to facilitate conversion of poles from the engine heater outlet. Pole attachment also has the option of installing various accessories on mounting plate. Mounting plate and other components can be ordered as accessories.

Charging box 3-phase, socket type 2, with meter

Charging box 3-phase, socket type 2, with meter

Art. no.: 2449139

The charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of the main fuse tripping. Complete with GARO Modbus 1-phase / 3-phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions.

Charging box 3-phase, socket type 2, without meter, JFB type A

Charging box 3-phase, socket type 2, without meter, JFB type A

Art. no.: 2449138

The charging box is protected against DC fault currents and prepared with dynamic load balancing. DC fault monitoring is a safety feature required when charging EV. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of the main fuse tripping. Complete with GARO Modbus 1-phase / 3-phase energy meter in the power station for activating load balancing. The charging box can be supplemented with RFID readers and / or communication cards etc. to activate many smart extra functions. JFB-A with DC monitoring and without electricity meter.

Charging box Twin, 3-phase, with fixed cable

Charging box Twin, 3-phase, with fixed cable

Art. no.: 2480309

odular dual charge boxes for three-phase charging that can be built to the desired system through group formation, based on a master unit with WiFi card to which simpler charge boxes can be connected. Each socket is protected with DC fault protection and type A earth fault switch according to international standards. Load balancing automatically reduces the vehicle's charging current and minimizes the risk of main fuse tripping. Supplement with GARO modbus energy meter in the power plant for activation of load balancing.

Charging box Twin, 3-phase, with fixed cable

‌
‌
‌
‌
‌
‌
‌
‌

Showing 52 of 145