Order lines: 0

Ahlsell Products Infra & SewerWater and sewage pipe couplings

Water and sewage pipe couplings

Transition couplings

Electrofusion systems

Compression fittings

Här finner du en omfattande flora av kopplingstekniker för i princip alla typer av VA-rör. Välj bland mekaniska kompressionskopplingar, el-svetssystem för skarvning av PE-rör, dragsäkra kopplingar för olika typer av rörmaterial och tillbehör så som stödhylsor för att säkert erhålla täta skarvar.

PRK 403, straight coupling ext thread

PRK 403, straight coupling ext thread

Art. no.: 2435212

For polyethylene pipes PEL, PEH and PEM, PN 6.3 and PN 10, in accordance with SS 3362. For PVC pipes with special pressure screw and cone.

Electrofusion end cap, GF

Electrofusion end cap, GF

Art. no.: 2424594V

For PE pipes and parts. 4 mm pin. Material-outflow limited weld indicator.

Tensile restrained coupling, Waga MULTI/JOINT 3007, straight

Tensile restrained coupling, Waga MULTI/JOINT 3007, straight

Art. no.: 1141955

For all types of pipe material with fully pull-proof Uni/Fiksers®.

Fernco transition coupling MA-plastic

Fernco transition coupling MA-plastic

Art. no.: 3109585

Transition couplings with hose clamps. PVC/acid-resistant steel.

Fernco transition coupling MA-plastic

Fernco transition coupling MA-plastic

Electrofusion tapping tee, Frialen DAA

Electrofusion tapping tee, Frialen DAA

Art. no.: 2419755

For PE-pipe. For tapping under pressure. Saddle x long pointed end.

PRK 402, straight coupling int reduced thread

PRK 402, straight coupling int reduced thread

Art. no.: 2435501

For polyethylene pipes PEL, PEH and PEM, PN 6.3 and PN 10, in accordance with SS 3362. For PVC pipes with special pressure screw and cone.

PRK 402, straight coupling int reduced thread

Coupling Vatette PE 11360, straight

Coupling Vatette PE 11360, straight

Art. no.: 2436505

Vatette PE, for PEM-, PEL-, and PEH-pipes, with white plastic sleeve fitted, can be "rebuilt" from plastic to copper pipe or the reverse. Change the compression ring to a Vatette PE plastic sleeve in a Vatette coupling/ball valve = Vatette

Coupling Vatette PE 1138, straight internal thread

Coupling Vatette PE 1138, straight internal thread

Art. no.: 2436531

Vatette PE, for PEM-, PEL-, and PEH-pipes, with white plastic sleeve fitted, can be "rebuilt" from plastic to copper pipe or the reverse. Change the compression ring to a Vatette PE plastic sleeve in a Vatette coupling/ball valve = Vatette

Electrofusion elbow, Frialen, W90°

Electrofusion elbow, Frialen, W90°

Art. no.: 2419551

Plastic pipe coupling Philmac UTC

Plastic pipe coupling Philmac UTC

Art. no.: 2440555

Bridging connector for the transition from, for example, copper, steel, the cast iron mm to PE.

PSX transition coupling

PSX transition coupling

Art. no.: 2355447

Flexible pipe coupling for connecting pipes to drilled or cast holes in concrete; internal connection to concrete collars, wells and wall, or similar construction.

Electrofusion end cap, GF

Electrofusion end cap, GF

Art. no.: 2422824

For PE pipes and parts. 4 mm pin. Material-outflow limited weld indicator.

PRK 401, straight coupling

PRK 401, straight coupling

Art. no.: 2435014

For polyethylene pipes PEL, PEH and PEM, PN 6.3 and PN 10, in accordance with SS 3362. For PVC pipes with special pressure screw and cone.

PRK 401, straight coupling

PRK 403, straight coupling ext reduced thread

PRK 403, straight coupling ext reduced thread

Art. no.: 2435311

For polyethylene pipes PEL, PEH and PEM, PN 6.3 and PN 10, in accordance with SS 3362. For PVC pipes with special pressure screw and cone.

PRK 403, straight coupling ext reduced thread

PRK 402, straight coupling int thread

PRK 402, straight coupling int thread

Art. no.: 2435410

For polyethylene pipes PEL, PEH and PEM, PN 6.3 and PN 10, in accordance with SS 3362. For PVC pipes with special pressure screw and cone.

PRK 423, straight repair coupling

PRK 423, straight repair coupling

Art. no.: 2436826

TA 423. Repair connection, moveable, without stop

Coupling, straight, plastic-plastic, Type 100, Isiflo

Coupling, straight, plastic-plastic, Type 100, Isiflo

Art. no.: 2500015

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Repair coupling, straight without stop, plastic-plastic, Type 101, Isiflo

Repair coupling, straight without stop, plastic-plastic, Type 101, Isiflo

Art. no.: 2501062

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Coupling plastic-external thread, Type 105, Isiflo

Coupling plastic-external thread, Type 105, Isiflo

Art. no.: 2500312

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Coupling plastic-external thread, reduced, Type 112, Isiflo

Coupling plastic-external thread, reduced, Type 112, Isiflo

Art. no.: 2500734

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Coupling plastic-external thread, Type 110, Isiflo

Coupling plastic-external thread, Type 110, Isiflo

Art. no.: 2500619

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Coupling plastic-internal thread, Type 115, Isiflo

Coupling plastic-internal thread, Type 115, Isiflo

Art. no.: 2500940

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Coupling plastic-internal thread reduced, Type 116, Isiflo

Coupling plastic-internal thread reduced, Type 116, Isiflo

Art. no.: 2501112

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Coupling plastic-metal, Type 100, Isiflo

Coupling plastic-metal, Type 100, Isiflo

Art. no.: 2500020V

ISIFLO brass couplings provide a tight, tension-resistant connection that can be used with: PE 32, PE 50, PE 80, PE 100 after NS 3622. PVC after NS 3621. Copper pipes, 5/8", 1", 1.1/4", 1.1/2", 1.5/8", 1.3/4" and 2" after NS 824 for cold water. Copper pipes, 28, 35, 42, and 54 mm after NS 1758. Steel pipes, 1/2" to 2" after NS 5587 NOTE: APPLIES ONLY TO TYPE 142. On PEX pipes, a support socket must be used.

Elbow coupling plastic-plastic, Type 120, Isiflo

Elbow coupling plastic-plastic, Type 120, Isiflo

Art. no.: 2501328

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Elbow, plastic external thread, reduced , type 147, 90°, Isiflo

Elbow, plastic external thread, reduced , type 147, 90°, Isiflo

Art. no.: 2501682

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Reducer plastic-plastic, one-step, Type 135, Isiflo

Reducer plastic-plastic, one-step, Type 135, Isiflo

Art. no.: 2503035

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Reducer plastic-plastic, one-step, Type 140, Isiflo

Reducer plastic-plastic, one-step, Type 140, Isiflo

Art. no.: 2503027

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Transition nipple, plastic, external thread, type 147, 90°, Isiflo

Transition nipple, plastic, external thread, type 147, 90°, Isiflo

Art. no.: 2503267

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Transition sleeve, internal thread, Type 148, Isiflo

Transition sleeve, internal thread, Type 148, Isiflo

Art. no.: 2503639

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82.

Reinforcement bush, SDR11, Type 180, Isiflo

Reinforcement bush, SDR11, Type 180, Isiflo

Art. no.: 2506426

For PE and PVC -pipes of all pressure classes. Type-approved by the Swedish authorities no. 2732/82

Transition coupling, Type 113 Flexi, Isiflo

Transition coupling, Type 113 Flexi, Isiflo

Art. no.: 2503252

The Flexi Adapter is a flexible repair connection that provides a tight, pull-resistant connection for all types of pipes.

Flexi adapter, Type 136 Flexi, Isiflo

Flexi adapter, Type 136 Flexi, Isiflo

Art. no.: 2503249

The ISIFLO Flexi Adapter is a flexible repair connection that provides a tight, pull-resistant connection for all types of pipes.

Electrofusion elbow, Plasson, both-ends adjustable 0-24°

Electrofusion elbow, Plasson, both-ends adjustable 0-24°

Art. no.: 2411613

For PE-pipe. Double-sided, adjustable electrofusion angle joint. 4mm pin.

Tensile restrained coupling, Waga MULTI/JOINT 3057, flanged

Tensile restrained coupling, Waga MULTI/JOINT 3057, flanged

Art. no.: 1141976

For all types of pipe material with fully pull-proof Uni/Fiksers®.

Tensile restrained end cap, Waga MULTI/JOINT 3207, internal thread

Tensile restrained end cap, Waga MULTI/JOINT 3207, internal thread

Art. no.: 1142012

For all types of pipe material with fully pull-proof Uni/Fiksers®.

Tensile restrained coupling, Waga MULTI/JOINT 3107, reduced

Tensile restrained coupling, Waga MULTI/JOINT 3107, reduced

Art. no.: 1141965

For all types of pipe material with fully pull-proof Uni/Fiksers®.

Tensile restrained coupling, Hawle System 2000, Type 0430

Tensile restrained coupling, Hawle System 2000, Type 0430

Art. no.: 2440381

Fits PE/PVC. Easy installation without any special tools.

Tensile restrained end cap, Hawle System 2000 Type 8075

Tensile restrained end cap, Hawle System 2000 Type 8075

Art. no.: 2440424

Fits PE/PVC. Easy installation without any special tools. Please note! As standard, the outlet is placed axially in the end cover.

Insert stiffener GF, stainles, for PE, with wedge, SDR11

Insert stiffener GF, stainles, for PE, with wedge, SDR11

Art. no.: 1866658

For PE pipes PE100 PN16/ PE80 PN10 SDR11 with wedge.

Insert stiffener GF, stainles, for PE, with wedge, SDR17

Insert stiffener GF, stainles, for PE, with wedge, SDR17

Art. no.: 1866659

For PE pipes PE100 PN10/ PE80 PN6 SDR17 with wedge

Insert stiffener GF, stainles, for PE, without wedge, SDR11

Insert stiffener GF, stainles, for PE, without wedge, SDR11

Art. no.: 1866578

For PE pipes PE100 PN16/ PE80 PN10 SDR11 without wedge

Primofit tensile restrained coupling

Primofit tensile restrained coupling

Art. no.: 1540816

Hot-dip galvanised including support socket for steel pipes and PE pipes

Primofit tensile restrained straight coupling ext thread

Primofit tensile restrained straight coupling ext thread

Art. no.: 1540827

Hot-dip galvanised including support socket for steel pipes and PE pipes

Primofit tensile restrained straight coupling int thread

Primofit tensile restrained straight coupling int thread

Art. no.: 1540838

Hot-dip galvanised including support socket for steel pipes and PE pipes.

Coupling Vatette PE 1136, straight external thread

Coupling Vatette PE 1136, straight external thread

Art. no.: 2436514

Vatette PE, for PEM-, PEL-, and PEH-pipes, with white plastic sleeve fitted, can be "rebuilt" from plastic to copper pipe or the reverse. Change the compression ring to a Vatette PE plastic sleeve in a Vatette coupling/ball valve = Vatette

Elbow coupling Vatette PE 1139

Elbow coupling Vatette PE 1139

Art. no.: 2436539

Vatette PE, for PEM-, PEL-, and PEH-pipes, with white plastic sleeve fitted, can be "rebuilt" from plastic to copper pipe or the reverse. Change the compression ring to a Vatette PE plastic sleeve in a Vatette coupling/ball valve = Vatette

Elbow coupling Vatette PE 1145, external thread

Elbow coupling Vatette PE 1145, external thread

Art. no.: 2436550

Vatette PE, for PEM-, PEL-, and PEH-pipes, with white plastic sleeve fitted, can be "rebuilt" from plastic to copper pipe or the reverse. Change the compression ring to a Vatette PE plastic sleeve in a Vatette coupling/ball valve = Vatette

Elbow coupling Vatette PE 1147, internal thread

Elbow coupling Vatette PE 1147, internal thread

Art. no.: 2436566

Vatette PE, for PEM-, PEL-, and PEH-pipes, with white plastic sleeve fitted, can be "rebuilt" from plastic to copper pipe or the reverse. Change the compression ring to a Vatette PE plastic sleeve in a Vatette coupling/ball valve = Vatette

T-coupling Vatette PE 1150, T-pipe

T-coupling Vatette PE 1150, T-pipe

Art. no.: 2436580

Vatette PE, for PEM-, PEL-, and PEH-pipes, with white plastic sleeve fitted, can be "rebuilt" from plastic to copper pipe or the reverse. Change the compression ring to a Vatette PE plastic sleeve in a Vatette coupling/ball valve = Vatette

Adapter Vatette PE 1126, external pipe thread

Adapter Vatette PE 1126, external pipe thread

Art. no.: 2436596

With smooth end that fits to the Vatette compression ring coupling (for copper pipes) x external pipe thread. The externally pipe-threaded part is bevelled to fit to a Pelette nut/plastic sleeve.

Adapter Vatette PE 1127, internal pipe thread

Adapter Vatette PE 1127, internal pipe thread

Art. no.: 2436604

With smooth end that fits to the Vatette compression ring coupling (for copper pipes) x internal pipe thread.

Showing 52 of 172