Ahlsell
Order lines: 0
Quick order
AhlsellProductsElectricLighting 70-83

Lighting 70-83

70 Interior light luminaires
72 Industrial luminaires
73 Emergency luminaires
74 Downlights, spotlights
75 General use luminaires
76 Construction and temporary work lighting
77 Exterior luminaires
79 Luminaire accessories
81 LED modules as well as conversion, replacement and rebuild kits
82 LED light sources
83 Light sources

Ahlsell helps you find the right lighting and luminaires. Whether you work with installing interior or exterior lighting for public environments, industry, or private housing, we have the range for your needs and projects. Here you will find LEDs, downlights, emergency lighting, and accessories for easy installation. Smart lighting solutions from several major suppliers. Here you will find lighting fixtures in many different designs. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell store.

New in the online store
Ceiling luminaire aRound Slice
a-collection
Ceiling luminaire aRound Slice
Art. no.: 7506891
Ceiling luminaires with a modern design language for indoor installation. Available in two sizes where the smaller can be set in three power steps 24W-18W-10W (2400lm-1800lm-1000lm) and the larger in two steps 38W-29W (3800lm-2900lm). Both sizes can be adjusted between 3000K and 4000K. All adjustment takes place with dip switches on the luminaire before assembly. The smaller luminaire is available as on/off and with HF sensor and background light. The sensor fixture cannot be used to control additional fixtures. The sensor fixture does not work optimally in rooms with irregular ceiling height and is therefore not recommended for e.g. stairwells. The larger fixture is available as an on/off and Dali/PushDim version. Both sizes can be mounted directly to the ceiling, the smaller one can also be mounted over a ceiling box.
Ceiling luminaire aRound SliceCeiling luminaire aRound SliceCeiling luminaire aRound SliceCeiling luminaire aRound Slice
Ceiling/wall luminaire COOL, Ifö Electric
Ifö
Ceiling/wall luminaire COOL, Ifö Electric
Art. no.: 7511280
Ifö Cool is an external downlight. It comes in two versions, IP23 model is 52 mm high and IP44 the version 65 mm, both are 120 mm in diameter. The fittings, for wall or roof installation are very easy to place. Through their austere design, they can be mounted in many places, both indoors and outdoors. Lamp holder GX53. Light source with built in driver comes in design for compact lighting tubes or LEDs (not included). The fitting has breaker openings on opposite sides. Cutover 3 x 1.5 mm² is possible in the fitting.
The fitting comes in white glaze NCS S 1502-G50Y, distinct medium grey glaze NCS S 6005-G80Y alternative black glaze NCS S 9000-N. Cool fittings are, like all the Ifö fittings, fully insulated, cyclically adapted, does not discolour, tolerates heat and cold and difficult environment, and is very easy to keep clean.
LED strip 24V IP67 Lowlum
Hide-a-lite
LED strip 24V IP67 Lowlum
Art. no.: 7509838
LEDstrip 24V IP67 is available with three light fluxes, Low, Mid and High, to make it easier to find the right light for the right place inside and outside. Do you want a subtle and relaxed atmosphere? Select Low. Do you need powerful lighting to highlight specific areas? Select High. Perfect when you want to adapt the light to create character regardless of the environment. Fits perfectly in our range of aluminum profiles. Very good color reproduction, RA>90. Supplied as standard in five meter rolls with two meter connection cable at each end, a quick connect and self-adhesive tape for easy assembly. Five-meter packages contain products to be able to create three different lengths according to your wishes. LEDstrip 24V can also be custom-ordered in desired lengths. Drives are ordered separately according to the desired fog technology and location.
LED strip 24V IP67 LowlumLED strip 24V IP67 Lowlum
Industrial luminaire Liteline IP44 G2
Hide-a-lite
Industrial luminaire Liteline IP44 G2
Art. no.: 7218583
Highly efficient fluorescent tube replacement with several control options. Body of white-painted sheet steel with folding patented end caps and prismatic dome of shock-resistant polycarbonate with opal film for even light distribution. Both end caps and dome made of recycled plastic. Replaceable LED and driver, possibility to choose color temperature and adjust light flow via DIP- switch. Quick terminal block at both ends for easy reconnection. Over-connection 5x2.5mm2 as standard. Liteline G2 is perfectly suited where the need for light is large and the demands on performance are high, such as production environments, garages or industrial premises.
S = Microwave sensor
SC = Sensor with corridor function
BT = Bluetooth
Nöd = Emergency light operation
CLO = Constant Light Output
Industrial luminaire Liteline IP44 G2Industrial luminaire Liteline IP44 G2Industrial luminaire Liteline IP44 G2Industrial luminaire Liteline IP44 G2Industrial luminaire Liteline IP44 G2
+
3
Ceiling and wall luminaire LED Athena II sensor
Westal
Ceiling and wall luminaire LED Athena II sensor
Art. no.: 7502812
Thin ceiling and wall ceiling made of polycarbonate with opal anti-glare protection, equipped with an LED unit. The luminaire is controlled with a built-in microwave sensor that can be set as needed using DIP switches on the driver. There, functions such as sensitivity, time for background light and whether the luminaire should light up when there is movement when it is light outside can be regulated IP44, IK10, Class II luminaire with quick connection terminal block and double knockouts for external cable and relay connection.

Master = The luminaire can be connected as a master, which means that it can control other luminaires. At maximum detection, the distance is approx. 6m. Can control Max 100W with master included. Several master luminaires can be installed in parallel, provided that the luminaires have the same group fuse and do not exceed 100W in total. Comes with quick connection terminal block and double knockouts for external cable and forwarding.

NÖD = With separate emergency light module with automatic self-test and status indication via green/red diode. In the event of a power failure, the luminaire lights up for 3 hours via battery. The battery can be easily replaced via quick contact during maintenance and is available as a spare part.
Ceiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensor
Industrial luminaire IP44 Indy44 LED, a-collection
a-collection
Industrial luminaire IP44 Indy44 LED, a-collection
Art. no.: 7298400
Area of application:
General surfaces, garage or other similar indoor environments requiring IP44 a functional general lighting system.
Version:
D-marked, encased, all-purpose LED fixture, IP 44. Slim white-lacquered body. Aluzinc, with durable plastic ends. Diffuser, acrylic opal-line prismatic. Available in Light colour 830 and 840.. With or without a sensor. The sensor fixtures have built-in
HF motion sensors for max 500VA LED load. Sensor fixtures can be connected in groups with one or more sensor fixtures as a master and 6 pieces of slave fixtures.

The DALI CF luminaires come with one combo for DALI, SwitchDIM and corridor function (CF). The luminaires have corridor function (CF) with basic light (30 minutes after-light at 10% fog level), available as master with sensor (DALI CF Sensor) or slave without sensor (DALI CF). A maximum of 20 slaves (DALI CF) can be connected, including masts. Can also be delivered with on-demand and other configurations of DALI CF (on call time and fog level) on request.
Assembly:
Flexible mounting direct to the ceiling, on a wall bracket, fixture rail or line. Attachment c-c 520, 900, and 1200mm respectively.
Connection:
25 W: Cable insertion through 13 mm knockouts in the ends.
Others: Cable insertion through 13 mm knockouts in the ends and on the top of the luminaire. 5-pole quick-connect terminal with the possibility of diverting mounted in the middle of the luminaire.
Luminaires type ÖK have five-pole quick-connect terminals at each end for easy switching. Installation instructions for the sensor are available at www.ahlsell.se "
LED lamp CorePro PLT HF GX24q-x, 4-pins
Philips
LED lamp CorePro PLT HF GX24q-x, 4-pins
Art. no.: 8298331
Philips Corepro LED PLT. An LED light source specially created to replace fluorescent lighting in downlights as well as other luminaires poem wall and roof, and follows the ROHS Directive. Fits in existing plinths as a director and then deliver a very long life of 30,000 hours and an energy consumption reduction of 60%. Execution in split -proof plastic and in the same stylish, practical shape as the predecessors. Fits well in most environments - such as meeting rooms, corridors, foyers, trade and inn. The product replaces older lighting. Created for connection to high frequency (HF), therefore check compatibility before installation. No special eligibility is needed to change to change conventional compact fluorescent lamps to this product.
LED lamp CorePro PLT HF GX24q-x, 4-pinsLED lamp CorePro PLT HF GX24q-x, 4-pinsLED lamp CorePro PLT HF GX24q-x, 4-pinsLED lamp CorePro PLT HF GX24q-x, 4-pins
New in the online store
Straight post root-lacquered for single (E) fitting, Moramast
Moramast
Straight post root-lacquered for single (E) fitting, Moramast
Art. no.: 7780772
Material: Welded steel tubes in accordance with EN 10219-1 CFCHS.
Steel type: S235JRH and S355J2H.
Welded joints: Pipe joints in accordance with method 1 if the bottom pipe diameter is > 152 mm. Pipe joints in accordance with method 2 if the bottom pipe diameter is ≤ 152 mm.
Cover: Fittings in accordance with SS 2776 and SS 2777. The hatch is placed 1,200 mm above ground.
Hatch width: Bottom diameter: 108-140; 85 mm. Bottom diameter: 152-219; 100 mm.
Screws: 2 stainless A2 MCS M6x12 for post insertion and earthing screw; 2 stainless A2 K6S M6x16 for the hatch.
Surface treatment: Hot-dip galvanised in accordance with SS-EN ISO 1461 and lacquered with root protection in iron mica epoxy for one metre at the root.
Ceiling luminaire LED Athena II
Westal
Ceiling luminaire LED Athena II
Art. no.: 7504099
Thin roof and wall plastic luminaire made of polycarbonate with opal glare protection, equipped with LED unit in on/off, pir sensor or master design.

On/off dimmable with front edge dimmer.

PIR sensor with up to 6m detection surface. The sensor has adjustable holding time and sensitivity. The luminaire can be connected as a master, which allows it to control other luminaires.

Master is controlled with a built-in microwave sensor that can be canceled as needed using dip switches on the drive. The luminaire can be connected as a master, which allows it to control other luminaires. At the maximum detection, the distance is about 6m.

NÖD = with a separate emergency light module with automatic self -test and status indication via green/red diode. In case of voltage loss, the luminaire shines for 3h via battery. The battle diet can easily be replaced via quick contact during maintenance and is available as a spare part.
Ceiling luminaire LED Athena IICeiling luminaire LED Athena IICeiling luminaire LED Athena II
Park fixture Plurio LED, Thorn
THORN
Park fixture Plurio LED, Thorn
Art. no.: 7753920
LED fixture for post-top mounting without disturbing uplight - ideal for residential areas and parks. Great performance and efficiency. For the renewal of urban environments and residential areas. Low cost of ownership: life span: 100,000 h (25° C, L70), light control for additional energy-savings, easy to install and maintain. Fits well with the Clan series - a complete package for the city environment. Post neck and aluminium fixtures (LM6), powder- coated in silver grey 150 with structure similar to RAL 9006, dark beige 900 similar to RAL 7043 on the two-colour model.
Diffuser: Clear, UV-stabilized polycarbonate with anti-glare exterior prism. Internal reflector and internal cable tube: white, high-reflecting ABS plastic.
Reflector (asymmetrical model): high- reflective anodized aluminium.
Screwsr: stainless steel.
Mounting on post 60 mm (insert 75 mm)
Recommended height: 3–4 m
Access to LED and ballast via three screws under the fixture housing
Models available with pulled cable, length 4 m
Park fixture Plurio LED, Thorn
LED strip Cobby 12V
Designlight
LED strip Cobby 12V
Art. no.: 7510783
Cobby LED strip 10W/m with 2x2m starter cables 3000K. With Cobby LED strip you can create indirect lighting to, for example, illuminate kitchen counters or cupboards. Quick connections and accessories make the LED strip flexible and easy to install. Cobby LED strip is a premium product where the COB technology provides even lighting without spot effects. The Cobby 12V strip can be cut every 2.5 cm and is supplied with 2 m quick-connect starter cables. The quick-connect is carefully selected to avoid loose contact and is clamped using pliers to make contact with the contact points of the LED strip. Cables included 2x2m are in neutral white color instead of the usual red/black that is common for similar products. Quick connectors and the light strip included in the package give the possibility to use the strip as a whole or divide it into two parts If you need to connect several lengths or divide the strip into more than 2 parts, there is an accessory kit (article: COB12/24-8mm) that provides connection options for most needs. Designlight's range also includes accessories such as 12V transformers and aluminum profiles with covers.

Total consumption: 50W
Length: The LED strip is 5m long
Maximum recommended length: 10 m
Cuttable: every 2.5 cm
Installation: The LED strip has self-adhesive tape on the back
Brightness: 850lm/m
CRI: >90
Width: 8 mm
Dimmability: To dim an LED strip, it must be connected to a dimmable transformer or a secondary dimmer that is on the 12V side. The LED strip can also be powered by battery (12VDC)
LED strip Cobby 12V
Showing 52 of 1401