Order lines: 0

Ahlsell Products ElectricControl cabinets 25-26

Control cabinets 25-26

26 Flanges, profile rails

Do you need an appliance cabinet? Ahlsell helps you find the products for smooth installations, individual or combined. With tailor-made appliance cabinets, you prevent water and dirt from entering. Choose appliance cabinets and other wall cabinets in stainless aluminum or sheet steel that are stable. Here you will find the right appliance cabinets and accessories for all kinds of jobs. We provide smart solutions from most major suppliers for mounting on walls, units, or other places. The majority of products are environmentally assessed according to Sunda Hus, Byggvarubedömning, and food approved. Delivery throughout Sweden. Explore our wide range of appliance cabinets, enclosures, and accessories here in the online store or visit your nearest Ahlsell shop.

Earth cable flange in alloy detachable, FL 33

Earth cable flange in alloy detachable, FL 33

Art. no.: 2635146

Light metal flanges for connection of plastic ground cable. The flanges are supplied with neoprene gasket, so called onion packing. The sleeves have a powerful pressure washer that provides some strain relief for the cable. All flanges are fitted with 2 threaded holes for cable screwing M20. IP67.

Earth cable flange in alloy detachable, FL 33

Earth cable flange in alloy detachable, FL 33

Earth cable flange in alloy FL 13

Earth cable flange in alloy FL 13

Art. no.: 2635004

Light metal flanges for connection of plastic ground cable. The flanges are supplied with neoprene gasket, so called onion packing. The sleeves have a powerful pressure washer that provides some strain relief for the cable. All flanges are fitted with 2 threaded holes for cable gland M20 - 2635004 have M16 and drain screw. IP67.

Earth cable flange in alloy FL 13

Earth cable flange in alloy FL 13

Device boxes Solid PC, grey cover

Device boxes Solid PC, grey cover

Art. no.: 2539519

Including: Base with screws for mounting plate cover with PUR gasket and polyamide locking screws.
PC: IP66/IP67, IK09/IK08

Junction boxes SSTB without flange opening 120mm deep

Junction boxes SSTB without flange opening 120mm deep

Art. no.: 2510576

Material: AISI 304 S15 grained 1mm stainless steel / AISI 316 (by request). Casing: 1mm. Door: 1.5mm
Enclosure: Edge-bent and welded. Four M6x13 bolts for bottom profile/ Mounting plate for fastening.
Surface treatment: 240s grained stainless steel. (Average 0.5µm)
Earthing: Earthing bolts M8x12mm in the enclosure and lid, M8 nuts, earthing plates, and labels.
Enclosure class: Conforms to IP66 and NEMA Type 4X,12,13, IK10.
Gaskets: Sealing is guaranteed by a continuous polyurethane gasket.
Approval: CE, KEMA, cUL, UL
Delivery includes: Enclosure, lid, screw for lid, accessories, cover plugs, and earthing accessories.

Filter fans EF

Art. no.: 2519160

Eldon filter fans and exhaust filters are installed with a time-saving "click-in" mount. It requires only one penetration and no screws. Enclosure class IP54 and a working temperature between -15°C and + 55°C.

Evacuation filter, EFA, Eldon

Evacuation filter, EFA, Eldon

Art. no.: 2519133

With structural lacquer, rubber enclosure shall be used.

Cover flanges, grey of Light alloy

Cover flanges, grey of Light alloy

Art. no.: 2639029

Light alloy. Grey lacquered RAL 7032.

Cover flanges, grey of Light alloy

Blank flange, plastic M-thread

Blank flange, plastic M-thread

Art. no.: 2633534

Knock-out with metric threads

Blank flange, plastic M-thread

Blank flange, plastic M-thread

Device box Euronord ALN, Aluminium

Device box Euronord ALN, Aluminium

Art. no.: 2500901

Including: Base with screws for mounting plate/DIN rail, PUR seal cover and stainless steel locking screws.

Perforated flange FL 13 light alloy

Perforated flange FL 13 light alloy

Art. no.: 2631620

Light alloy. Grey lacquered RAL 7035.

Perforated flange FL 13 light alloy

Perforated flange FL 13 light alloy

Perforated flange FL 13 light alloy

Perforated flange FL 13 light alloy

Perforated flange FL 13 light alloy

Wall-mounted cabinet type MAS, single door, Eldon

Wall-mounted cabinet type MAS, single door, Eldon

Art. no.: 2516416

Enclosure, edge-bent and welded. With four threaded holes (press nuts) in the rear of the cabinet, allowing for mounting of brackets to the wall from the outside. The mounting holes are raised 1.5 mm for free airflow behind the cabinet.
Delivery includes: Mounting plate with anchors, gland plates with gasket, grounding connectors for mounting plate and flange. Two mounting profiles for door (from size 05052).
Four different widths and two depth variants, depending on the cabinet's size. Flange openings placed far back against the cabinet's back, to allow for easy wiring into mounting plate.

Heating element CSF060

Heating element CSF060

Art. no.: 2599014

This heater is advantageously installed in enclosures to prevent condensation, and to maintain an appropriate temperature. Owing to its design, a so-called "chimney effect" is formed that causes the air to rotate and thus effectively spreads the heat into the application. Heating source consists of PTC element. PTC is a ceramic blend that provides long service life, and is capable of being heated up for a long time. This is a semiconductor which adapts its output to the surrounding temperature. PTC-element has high starting current and provides full output almost immediately. The current later drops quickly and the element is thereafter self-regulating, in other words, the warmer the surroundings the less out the element delivers. Model CSF060 has integrated thermostat with permanently set value, which makes the installation very quickly and reliability very high. Integrated thermostat means less cabling that saves both time and money.

Transition flange to FL21.

Schneider Electric

Transition flange to FL21.

Art. no.: 2575440

Made of sheet steel.

Transition flange to FL21.

Transition flange to FL21.

Transition flange to FL21.

Transition flange to FL21.

Earth cable flange in alloy FL 21, low

Earth cable flange in alloy FL 21, low

Art. no.: 2635218

Light metal flanges for connection of plastic ground cable. The flanges are supplied with neoprene gasket, so called onion packing. The sleeves have a powerful pressure washer that provides some strain relief for the cable. All flanges are fitted with 2 threaded holes for cable screwing M20, excl. 26 352 28. IP67.

Earth cable flange in alloy FL 21, low

Earth cable flange in alloy FL 21, low

Control cabinet key HD

Control cabinet key HD

Art. no.: 2565455

For HD locking.

Control cabinet key HD

Thermostat ETR202

Thermostat ETR202

Art. no.: 2519084

For temperature control inside the control cabinet together with the heating element or for the regulation of filter fans, heat exchangers or other climatic equipment.
Snap-in fastening on 35 mm rail DIN 46277 and EN 50022. in accordance with VDE 0875 degree N of interference.

Earth cable flange PKF FL 13

Earth cable flange PKF FL 13

Art. no.: 2655001

With cable relief clamp

Earth cable flange PKF FL 13

Pleated filter SK

Pleated filter SK

Art. no.: 2507306

Pleated filter for filter and ceiling fans, cooling units and chillers.

Pleated filter SK

Wall-mounted cabinet type MAD, double door, Eldon

Wall-mounted cabinet type MAD, double door, Eldon

Art. no.: 2516474

Enclosure, edge-bent and welded. With four threaded holes (press nuts) in the rear of the cabinet, allowing for mounting of brackets to the wall from the outside. The mounting holes are raised 1.5 mm for free airflow behind the cabinet. Delivery includes: Mounting plate with anchors, gland plates with gasket, grounding connectors for mounting plate and flange. Two mounting profiles for right-hand door.

Cover flanges stainless

Cover flanges stainless

Art. no.: 2632101

Made of stainless steel.

Cover flanges stainless

Cover flanges stainless

Cover flanges, grey of steel plate

Cover flanges, grey of steel plate

Art. no.: 2630505

Incl. countersunk screws and nuts

Cover flanges, grey of steel plate

Filter fans NSYC

Schneider Electric

Filter fans NSYC

Art. no.: 2579869

Filter fans with high performance and low power consumption. Filter fans create forced circulation in the cabinet so that heat is laid out through the outlet filter, which is ordered separately. Assumes that the ambient temperature is at least 5 degrees lower than the temperature inside the housing.
Easy to install and maintain. The filter should be replaced regularly.
IP54 Encapsulation class.

Junction boxes Cubo T1 - T6

Junction boxes Cubo T1 - T6

Art. no.: 2673312

Ensto Cubo T kapslade klämmor erbjuder ett färdigt produktpaket för förgrening, skarvning och anslutning. Klämmorna är Ensto Clampo, vilka passar de mest allmänna Cu- och Cu/Al-ledarna.

Junction boxes Cubo T1 - T6

Junction boxes Cubo T1 - T6

Junction boxes Cubo T1 - T6

Junction boxes Cubo T1 - T6

Universal encapsulations Cubo C, with grey cover

Universal encapsulations Cubo C, with grey cover

Art. no.: 2532865

Made of polycarbonate, standard colour grey RAL 7035, grey cover.
The enclosures are equipped with knock-out according to SFS-flange standard.
Adjustable corner lifts allow mounting of plates and panels for different depths. The underparts can easily be built into larger units.

Spacing bolt DB/AMTE

Eldon Installation

Spacing bolt DB/AMTE

Art. no.: 2519621

Spacing bolt DB/AMTE

Junction boxes Thalassa TBS gray lid

Junction boxes Thalassa TBS gray lid

Art. no.: 2579666

Color: Silica gray RAL 7035
Material: halogen-free ABS
Smooth sides for easy machining

Junction boxes Thalassa TBS gray lid

Junction boxes Thalassa TBS gray lid

Junction boxes Thalassa TBS gray lid

Lexan sheet

Art. no.: 2568940

Plexiglass type. For a guard, can be cold bent and drilled.

Device boxes MNX with grey cover

Device boxes MNX with grey cover

Art. no.: 2535351

MNX is a family of universal encapsulations of robust execution which are convenient and easy to use with many accessories. They are available in two different materials, ABS plastic with smooth sides (ABS9 and polycarbonate with smooth sides (PC9 or metric knock-outs (PCM). The polycarbonate cabinets are UV-resistant and very suitable for use outdoors. All underneath parts have attachment heels for mounting plate and DIN rails. For those who use mounting screws with large heads, outer lugs can be purchased extra. Other accessories are mounting plates, DIN rails, front plates, hinges, etc.

Environmental information: All encapsulations are bromine and halogen free and comply with the RoHS and REACH directives.

Knockout openings (knock-outs) for PCM
Size Knockout openings long side Knockout openings short side
PCM 100 2xM32/M20 1xM25/M16
PCM 125 2xM32/M20 1xM25/M16
PCM 150 3xM25/M16 2xM32/M20
PCM 175 3xM32/M20 3xM25/M16
PCM 200 3xM25/M16 + 2xM32/M20 3xM32/M20
PCM 200X 8xM20+1xM50/M32 2xM32/M20+1xM20

Cover flanges, grey of Plastic

Cover flanges, grey of Plastic

Art. no.: 2633210

Cover flanges, grey of Plastic

Cover flanges, grey of Plastic

Flange nut, double nut

Flange nut, double nut

Art. no.: 2636071

Screws are included with 2636071 and 2636072

Flange nut, double nut

Flange nut, double nut

Flange nut, double nut

Flange nut, double nut

Device box Euronord PC, Polycarbonate grey cover

Device box Euronord PC, Polycarbonate grey cover

Art. no.: 2536105

Including: Base with screws for mounting plate/DIN rail, PUR seal cover and ferrite acid-resistant locking screws. PC: IP66/IP67, IK08/IK07

Mounting rails MNX

Mounting rails MNX

Art. no.: 2537205

Cut out for enclosures.

Mounting plates MNX

Mounting plates MNX

Art. no.: 2537214

1.5 mm galvanised steel.

Mounting rails, EK

Mounting rails, EK

Art. no.: 2538315

Mounting rails for the EK series.

Flanges threaded with polycarbonate with knock-out in bottom, PG

Flanges threaded with polycarbonate with knock-out in bottom, PG

Art. no.: 2538333

Made of polycarbonate with knock-out in the bottom, PG

Mounting kit flange

Mounting kit flange

Art. no.: 2538398

2 jumpers + 4 screws

Hinge and lock screw EK

Hinge and lock screw EK

Art. no.: 2538415

Hinge set made of Polyamide. One pair incl. screws and drill template

Mounting lugs EK

Mounting lugs EK

Art. no.: 2538440

For external mounting.

Ventilation device

Ventilation device

Art. no.: 2538442

Ventilation device.

Ventilation device

Mounting plates EK, Solid

Mounting plates EK, Solid

Art. no.: 2538301

Mounting plate made of galvanised steel.

Device boxes Solid, transparent cover

Device boxes Solid, transparent cover

Art. no.: 2539535

Including: Base with screws for mounting plate cover with PUR gasket and polyamide locking screws.
PC: IP66/IP67, IK09/IK08

Ground cable flange LNPB EMC

Ground cable flange LNPB EMC

Art. no.: 2635314

EMC-approved class 2 according to IEC TS 61 587-3, frequency range 30 - 1000 MHz. Including EMC packing.

Ground cable flange LNPB EMC

Assembly panel Cubo C, O

Assembly panel Cubo C, O

Art. no.: 2532507

Hinge Cubo S

Art. no.: 2533405

Hinge pair, size 28 x 28 mm. Accessories for Ensto Cubo D and S enclosures. Note. does not fit Cubo S 10mm lid.

Universal encapsulations Cubo C, with transparent cover

Universal encapsulations Cubo C, with transparent cover

Art. no.: 2532887

Made of polycarbonate, standard colour grey RAL 7035, transparent cover.
The enclosures are equipped with knock-out according to SFS-flange standard.
Adjustable corner lifts allow mounting of plates and panels for different depths. The underparts can easily be built into larger units.

DIN rail Cubo C, O

DIN rail Cubo C, O

Art. no.: 2532535

Mounting rail DIN.

Enclosure Cubo S, with gray cover, metric knockouts

Enclosure Cubo S, with gray cover, metric knockouts

Art. no.: 2531005

Enclosure class IP 66/67
Made in polycarbonate with metric knock-out in the under part.
Standard colour is grey RAL 7035, grey cover.
Special advantages: All locking screws may be supplied with seals as well as grooves for circuit boards in the lower part.

Enclosure Cubo S, with gray cover, metric knockouts

Enclosure Cubo S, with gray cover, metric knockouts

Enclosure Cubo S, with gray cover, metric knockouts

Enclosure Cubo S, with gray cover, metric knockouts

Enclosure Cubo S, with gray cover, metric knockouts

Enclosure Cubo S, with transparent lid

Enclosure Cubo S, with transparent lid

Art. no.: 2531059

Enclosure class IP 66/67
Made in polycarbonate with metric knock-out in the under part.
Standard colour is grey RAL 7035, grey or transparent cover.
Special advantages: All locking screws may be supplied with seals as well as grooves for circuit boards in the lower part.

Enclosure Cubo S, with transparent lid

Enclosure Cubo S, with transparent lid

Enclosure Cubo S, with transparent lid

Enclosure Cubo S, with transparent lid

Mounting plates Cubo S

Mounting plates Cubo S

Art. no.: 2531813

1.5 mm galvanised steel

DIN rails Cubo S

DIN rails Cubo S

Art. no.: 2531835

made of galvanised steel

Thermostat Schneider Electric

Schneider Electric

Thermostat Schneider Electric

Art. no.: 2579847

Temperature range 0-60°C

Exhaust filter Schneider Electric

Schneider Electric

Exhaust filter Schneider Electric

Art. no.: 2579878

Colour RAL 7035

Showing 52 of 191