Order lines: 0

Ahlsell Products Heating and SanitationSprinkler range for sprinkler customers

Sprinkler range for sprinkler customers

Grooved & threaded pipes

Groove couplings

Grooved pipe parts

Sprinkler hose and accessories

Valves & Filter

Accessories/Consumables

Sprinkler accessories

Flow switches, pressure controls & Switches

Flow controller

Alarm valve accessories

Aucated fittings

Steel pipe parts forged

Press system stainless

Suspension and fastening

Ahlsell offers a wide range of products for installation projects, such as sprinklers, pipes, and fastening. Whether you work in property management or as an installer within HVAC, you will find everything needed for your next project. Ahlsell's offers a wide range of high-quality products from well-known suppliers and brands on the market. You can find everything from flow meters, alarm valve accessories, and fittings to your installation of sprinklers. Visit one of our stores to learn more about our products or check out the products here in our webshop.

Products (308)

Center Punch with Magnet

Center Punch with Magnet

Art. no.: 19045546

Socket, forged, black, in pressure vessel quality according to P235GH-TC1, SS-EN 10241

Socket, forged, black, in pressure vessel quality according to P235GH-TC1, SS-EN 10241

Art. no.: 1249358

Certificate provided on request.

Concrete screw multi-monti+

Concrete screw multi-monti+

Art. no.: 454992

MMS-SS- Hexagonal head with flange. European type approved, ETA 06/0078 Option 1.
Suitable for attachment of consoles and ceiling profiles etc. directly to the concrete without using an extra plate.
I) Permitted load kN in concrete C20/25. * Not covered by the ETA values recommended by the manufacturer. Values within ( ) can be used as recommendation of the manufacturer. Cross load values apply to concrete screws without concrete edge impact.

Concrete screw multi-monti+

Grooved split flange, Red

Grooved split flange, Red

Art. no.: 1356144

Split flange (GSF)
To create a transition from flanged pipe systems/components to worn -out systems.
PN 16 (EN 1092-2).
The split flange can handle up to 20.7 bar maximum working pressure.

Grooved split flange, Red

Grooved split flange, Red

Grooved flange adapter, Red

Grooved flange adapter, Red

Art. no.: 1654045

Grooved flange (GAF)
To create a transition from flanged pipe systems/components to worn -out systems.
PN 16 (EN 1092-2).
The worn flange can withstand up to 20.7 bar maximum working pressure.

Grooved flange adapter, Red

Grooved flange adapter, Red

Flow meter, FireSure, Threaded, for Sprinkler, InFlux

Flow meter, FireSure, Threaded, for Sprinkler, InFlux

Art. no.: 19045609

Hexagonal screw M6S 8.8 ZPL, ISO 4017

Hexagonal screw M6S 8.8 ZPL, ISO 4017

Art. no.: 234861

M-thread. Hexagonal screw in accordance with ISO 4017 , (DIN 933) fully threaded.

Grooved split flange, Galvanized

Grooved split flange, Galvanized

Art. no.: 1654050V

Split flange (GSF)
To create a transition from flanged pipe systems/components to worn -out systems.
PN 16 (EN 1092-2).
The split flange can handle up to 20.7 bar maximum working pressure.

Grooved split flange, Galvanized

Grooved split flange, Galvanized

Grooved split flange, Galvanized

Half coupling flat forged, black, int. thread SS-EN 10241

Half coupling flat forged, black, int. thread SS-EN 10241

Art. no.: 1247014

Non certificate article.

Grooved coupling Rigid, Red

Grooved coupling Rigid, Red

Art. no.: 1652215

Grooved coupling Rigid, Red

Sprinkler hose braided RFR UL/FM/SBSC incl. brackets and braces in packs of 10, a-collection

Sprinkler hose braided RFR UL/FM/SBSC incl. brackets and braces in packs of 10, a-collection

Art. no.: 1921680

The a-collection flexible sprinkler hose is an innovative product designed to save time and money. It can be installed quickly and easily by personnel without special skills, and the flexibility also allows the sprinkler hose to be installed if space is limited. The advanced technology and the extensive quality control of the a-collection will meet the high standards of our customers.The flexible sprinkler hose of the a-collection is designed in accordance with NFPA 13, 13D and 13R for limited flexible anchorage.
Minimum bending radius according to UL: 76mm
Minimum bending radius according to FM: 230mm
Complete including brackets and braces.
When ordering Concealda sprinklers for hoses, high end brackets must be ordered separately. RSK 19039635, end bracket 105 mm.

Sprinkler hose braided RFR UL/FM/SBSC incl. brackets and braces in packs of 10, a-collection

Sprinkler hose braided RFR UL/FM/SBSC incl. brackets and braces in packs of 10, a-collection

Sprinkler hose braided RFR UL/FM/SBSC incl. brackets and braces in packs of 10, a-collection

Sprinkler hose braided RFR UL/FM/SBSC incl. brackets and braces in packs of 10, a-collection

Sprinkler hose braided RFR UL/FM/SBSC incl. brackets and braces in packs of 10, a-collection

Wet Pipe Valve Gasket Kit

Wet Pipe Valve Gasket Kit

Art. no.: 19045014

Model E/E3 Wet Alarm Valve Service Kit.
Lid gasket, Flap rubber lining & Clamping unit.
Clamping ring Screw or nut.

Wet Pipe Valve Gasket Kit

Wet Pipe Valve Gasket Kit

Wet Pipe Valve Gasket Kit

Grooved filter UL approved, Reliable

Grooved filter UL approved, Reliable

Art. no.: 35716473

Grooved lightweight pipes, longitudinally welded, powder coated, 3m lengths

Grooved lightweight pipes, longitudinally welded, powder coated, 3m lengths

Art. no.: 1348832

Product description
NordicFlow® lightweight pipe is manufactured according to EN 10217-1 and is approved by FM. The pipes are cold-formed, longitudinally welded and precision-cut. C factor is 130 and the pipe is factory grooved according to OGS (Original Grooving System) in accordance with AWWA-C606. The pipes are blast-blasted and are available in two finishes. Epoxy powder coated pipes in gray (RAL 7012) with 70 μm for corrosivity class C1 and C2 and hot-dip galvanized surface treatment for corrosivity class C3. They are available in 6 and 3 meter lengths.
Areas of use
• Sprinkler system
• VS installations
o Heat
o Cooling
• Compressed air system

Corrosivity class

• Gray epoxy powder coated pipes with min. 70 μm in gray RAL 7012 is for corrosivity classes C1 and C2
• Hot-dip galvanized pipes with min. 55 μm EN 10240-A1 (Type E) pipe is for corrosivity class C3.

Approval
NordicFlow® Lightweight pipes have FM approval and the pipes are also FM approved together with PROFITS FITPRO (Ahlsell's quick coupling), butt coupling, and also with Victaulic 009N.
The painted pipes are tested in the salt spray test in accordance with UNI EN ISO 12944-6 for 480 hours with approved results.
In addition, Ahlsell has a certificate from SBSC and the products are assessed by Sundahus and the construction goods assessment.

Grooved lightweight pipes, longitudinally welded, powder coated, 3m lengths

90° angle fitting, black, forged, internal thread No. 13, SS-EN 10241

90° angle fitting, black, forged, internal thread No. 13, SS-EN 10241

Art. no.: 1243138

Brackets Jirva J913S, U-profile, Hot-dip Galvanized FZV

Art. no.: 3820149

Nipple Threaded x External Thread Black

Nipple Threaded x External Thread Black

Art. no.: 1650683

Transition adapter in steel, external thread x grooved pipe end.

Nipple Threaded x External Thread Black

Hex Key with Hole for Flow Switch/Pressure Switch, System Sensor

Hex Key with Hole for Flow Switch/Pressure Switch, System Sensor

Art. no.: 19045128

Nipple Pipe, Forged, Steel, Black, External Thread, No. 23, SS-EN 10241

Nipple Pipe, Forged, Steel, Black, External Thread, No. 23, SS-EN 10241

Art. no.: 1241611

Elbow female galvanized cast, no. 90

Elbow female galvanized cast, no. 90

Art. no.: 1270230

Threaded pipe parts according to EN 10242 (ISO 49) of adused castings according to EN-GJMW-400-5. Black pipe parts are oiled for storage and transport protection. Also available hot galvanized. Threads according to EN 10226-1/ISO 7-1. Pipe parts are checked and tested before delivery.

Grooved cap, Galvanized

Grooved cap, Galvanized

Art. no.: 1656155

Pipe fittings (GB, GT, GRC, GE, GRTR)
Used to make direction changes in grooved pipe systems.
The pipe parts can handle up to 20.7 bar maximum working pressure. Galvanized.

Grooved cap, Galvanized

Nipple Pipe, Forged, Hot-dip Galvanized, External Thread, No. 23

Nipple Pipe, Forged, Hot-dip Galvanized, External Thread, No. 23

Art. no.: 1241777

Elbow male galvanized cast, no. 92

Elbow male galvanized cast, no. 92

Art. no.: 1271451

Threaded pipe parts according to EN 10242 (ISO 49) of adused castings according to EN-GJMW-400-5. Black pipe parts are oiled for storage and transport protection. Also available hot galvanized. Threads according to EN 10226-1/ISO 7-1. Pipe parts are checked and tested before delivery.

Elbow male galvanized cast, no. 92

T-pipe with internal thread branch, stainless steel 316L, A-press, a-collection

T-pipe with internal thread branch, stainless steel 316L, A-press, a-collection

Art. no.: 1454489

Pressed with the M-gradients.
12-54 mm with press indicator.

T-pipe with internal thread branch, stainless steel 316L, A-press, a-collection

Hexagon screw M6S 8.8 galvanized ISO 4017 FIXX

Hexagon screw M6S 8.8 galvanized ISO 4017 FIXX

Art. no.: 560168

M-thread. Hex screw according to ISO 4017 (DIN 933), fully threaded.
Material certificates according to EN10204-3.1 can be downloaded on Ahlsell's website https://www.ahlsell.se/tjanster/certifikat/
To obtain your certificate, enter ahlsell's item number on the label on the packaging and batch number.

Wet pipe alarm valve

Wet pipe alarm valve

Art. no.: 19058440

Straight coupling forged, black, with conical seal, internal thread, No. 10a, SS-EN 10241

Straight coupling forged, black, with conical seal, internal thread, No. 10a, SS-EN 10241

Art. no.: 1252733

With conical seal.

Thread oil tilia

Thread oil tilia

Art. no.: 2590005

Thread oil that is completely biodegradable, for threading, drilling and punching in all materials, such as stainless steel acid-resistant, aluminium, steel and others. The thread oil gives minimal friction resistance, less wear on tools, better threads and a higher surface finish. Has an extremely high lubricating and cooling effect.

Thread oil tilia

End cap, cast steel no. 301

End cap, cast steel no. 301

Art. no.: 1328970

Threaded pipe parts according to EN 10242 (ISO 49) of adused castings according to EN-GJMW-400-5. Black pipe parts are oiled for storage and transport protection. Also available hot galvanized. Threads according to EN 10226-1/ISO 7-1. Pipe parts are checked and tested before delivery.

End cap, cast steel no. 301

End cap, cast steel no. 301

Grooved lightweight pipes, longitudinally welded, powder coated, 6m lengths

Grooved lightweight pipes, longitudinally welded, powder coated, 6m lengths

Art. no.: 1348823

Product description
NordicFlow® lightweight pipe is manufactured according to EN 10217-1 and is approved by FM. The pipes are cold-formed, longitudinally welded and precision-cut. C factor is 130 and the pipe is factory grooved according to OGS (Original Grooving System) in accordance with AWWA-C606. The pipes are blast-blasted and are available in two finishes. Epoxy powder coated pipes in gray (RAL 7012) with 70 μm for corrosivity class C1 and C2 and hot-dip galvanized surface treatment for corrosivity class C3. They are available in 6 and 3 meter lengths.
Areas of use
• Sprinkler system
• VS installations
o Heat
o Cooling
• Compressed air system

Corrosivity class

• Gray epoxy powder coated pipes with min. 70 μm in gray RAL 7012 is for corrosivity classes C1 and C2
• Hot-dip galvanized pipes with min. 55 μm EN 10240-A1 (Type E) pipe is for corrosivity class C3.

Approval
NordicFlow® Lightweight pipes have FM approval and the pipes are also FM approved together with PROFITS FITPRO (Ahlsell's quick coupling), butt coupling, and also with Victaulic 009N.
The painted pipes are tested in the salt spray test in accordance with UNI EN ISO 12944-6 for 480 hours with approved results.
In addition, Ahlsell has a certificate from SBSC and the products are assessed by Sundahus and the construction goods assessment.

Grooved lightweight pipes, longitudinally welded, powder coated, 6m lengths

Reducing hex niple cast steel, no. 245

Reducing hex niple cast steel, no. 245

Art. no.: 1317007

Threaded pipe parts according to EN 10242 (ISO 49) of adused castings according to EN-GJMW-400-5. Black pipe parts are oiled for storage and transport protection. Also available hot galvanized. Threads according to EN 10226-1/ISO 7-1. Pipe parts are checked and tested before delivery.

Pear Swivel for Sprinkler, MEFA

Pear Swivel for Sprinkler, MEFA

Art. no.: 3787734

Stainless steel pipe 316 L 6M, A-press, a-collection

Stainless steel pipe 316 L 6M, A-press, a-collection

Art. no.: 1454553

For drinking water installations. Un-annealed pipes.
Stated price applies per metre.

Stainless steel pipe 316 L 6M, A-press, a-collection

Trapezoidal plate bracket EF VdS, MEFA

Trapezoidal plate bracket EF VdS, MEFA

Art. no.: 4024385

Trapezoidal plate bracket EF VdS, MEFA

Sprinkler, FIFR LO, QR, Reliable, K115, DN20

Sprinkler, FIFR LO, QR, Reliable, K115, DN20

Art. no.: 19045208

Reducer cast steel, no. 241

Reducer cast steel, no. 241

Art. no.: 1318245

Threaded pipe parts according to EN 10242 (ISO 49) of adused castings according to EN-GJMW-400-5. Black pipe parts are oiled for storage and transport protection. Also available hot galvanized. Threads according to EN 10226-1/ISO 7-1. Pipe parts are checked and tested before delivery.

Automatic Pressure Maintenance Equipment, A-2, Reliable

Automatic Pressure Maintenance Equipment, A-2, Reliable

Art. no.: 19045114

90° bend stainless 316L, A-press, a-collection

90° bend stainless 316L, A-press, a-collection

Art. no.: 1454442

A-press Rfr – pipe parts of stainless steel 316L with heat- and ageing-resistant sealing rings. Joined using press tool.

90° bend stainless 316L, A-press, a-collection

Mechanical T-Grooved Outlet, Red, a-collection

Mechanical T-Grooved Outlet, Red, a-collection

Art. no.: 1650558

Mechanical T with Groove, (GMG)
Mechanical t-pipe/tapping clamp is used to create an outlet with grooved connection on steel pipe where holes can be drilled. Handles up to 20.7 bar maximum working pressure.

Mechanical T-Grooved Outlet, Red, a-collection

Mechanical T-Grooved Outlet, Red, a-collection

Mechanical T-Grooved Outlet, Galvanized, a-collection

Mechanical T-Grooved Outlet, Galvanized, a-collection

Art. no.: 1650428

Mechanical T with Groove, (GMG)
Mechanical t-pipe/tapping clamp is used to create an outlet with grooved connection on steel pipe where holes can be drilled. Handles up to 20.7 bar maximum working pressure.

Mechanical T-Grooved Outlet, Galvanized, a-collection

Grooved reducing tee, Red

Grooved reducing tee, Red

Art. no.: 1650452

Pipe parts (GB, GT, GRC, GE, GRTR)
Used to make directional changes in worn pipe systems.
The pipe parts can withstand up to 20.7 bar maximum working pressure.

Grooved reducing tee, Red

Grooved straight tee, Red

Grooved straight tee, Red

Art. no.: 1650472

Pipe parts (GB, GT, GRC, GE, GRTR)
Used to make directional changes in worn pipe systems.
The pipe parts can withstand up to 20.7 bar maximum working pressure.

Grooved straight tee, Red

Grooved straight tee, Galvanized

Grooved straight tee, Galvanized

Art. no.: 1650447

Pipe parts (GB, GT, GRC, GE, GRTR)
Used to make directional changes in worn pipe systems.
The pipe parts can withstand up to 20.7 bar maximum working pressure.

Grooved straight tee, Galvanized

Grooved reducing tee, Galvanized

Grooved reducing tee, Galvanized

Art. no.: 1650557

Pipe parts (GB, GT, GRC, GE, GRTR)
Used to make directional changes in worn pipe systems.
The pipe parts can withstand up to 20.7 bar maximum working pressure.

Grooved reducing tee, Galvanized

Quick coupling Rigid Galvanized, a-collection

Quick coupling Rigid Galvanized, a-collection

Art. no.: 1338478

Quick coupling Rigid Galvanized, a-collection

Quick coupling Rigid Red, a-collection

Quick coupling Rigid Red, a-collection

Art. no.: 1338469

Quick coupling Rigid Red, a-collection

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Art. no.: 4505808V

For heating/cooling systems, diesel, glycol, neutral fluids, and other materials that will not attack in the valve input material. In low-lead brass CW617N, and full throughflow.

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

End cap, forged, black, internal thread. No. 19, SS-EN 10241

End cap, forged, black, internal thread. No. 19, SS-EN 10241

Art. no.: 1249036

Storage Sprinkler, G XLO, SR, Reliable, K160, DN20

Storage Sprinkler, G XLO, SR, Reliable, K160, DN20

Art. no.: 19045025

Storage Sprinkler, G XLO, SR, Reliable, K160, DN20

Slagankare Sormat LAL +, collar

Slagankare Sormat LAL +, collar

Art. no.: 384775

LA+ no collar, electrogalvanised. ETA-approved impact anchor perfect for suspension systems.
Impact anchor for pre-installation with installation tools. Inner thread for metric screws and rods. Suitable screw length is 1-1.5 x anchor diameter + the installation thickness. Small drill depth simplifies drilling and ceiling installation. Suitable for sprinkler systems.
Impact anchors are intended for use in connection with medium and large loads. The impact anchor is suitable for use in hard materials such as concrete, solid tiles (max. M8) and natural stone. It is important to know that the impact anchor cannot expanded with the help of the screw. Using the impact punchdown tool, drive the edge of the anchor’s slotted part, which thereby expands. The collar provides a smooth surface even in case of deep drilling holes and hollow core slabs.

Permissible loads in kN in uncracked concrete C20/C25 -

Plug cast steel, no. 291

Plug cast steel, no. 291

Art. no.: 1320050

Threaded pipe parts according to EN 10242 (ISO 49) of adused castings according to EN-GJMW-400-5. Black pipe parts are oiled for storage and transport protection. Also available hot galvanized. Threads according to EN 10226-1/ISO 7-1. Pipe parts are checked and tested before delivery.

Round iron brackets FZB, electro-galvanized

Round iron brackets FZB, electro-galvanized

Art. no.: 3819668

Showing 52 of 308