Order lines: 0

Ahlsell Products VentilationMounting material

Mounting material

Mounting system

Vibration damper

Tape, shrink band, sealing strips

Do you work with the assembly and installation of ventilation solutions? Ahlsell helps you find assembly materials for your ventilation jobs. Regardless of whether you work with housing, public environments, or workshops, we have assembly material for your assignment. Here you will find wall mounts, glue, sealants, and joint compounds. If you are looking for tape and sealing strips, you will also find this. Mounting hardware is required for a complete installation. Visit your nearest Ahlsell store or browse our online store to discover our wide range of mounting materials.

Vibration Damper type B

Vibration Damper type B

Art. no.: 562293

Hörnstycken för stativrör, a-collection

Hörnstycken för stativrör, a-collection

Art. no.: 3820490

Corner piece for support tubes, Stiglöv

Corner piece for support tubes, Stiglöv

Art. no.: 3873582

Corner piece for tripod construction system in steel with surface treatment.

Vulk Tape, REC

Art. no.: 6653608

P-301 vulcanised tape is a powerful, "self vulcanizing ' sealing tape suited for circular ventilation ducts with requirements for the guaranteed air seal.

Outer Corner Combi, Sunchem

Outer Corner Combi, Sunchem

Art. no.: 6653370

Protective corner for installation above the guide corner. Suitable for most of the guide rails on the market.
Pre-drilled fitting holes and clips.

Ventilation sweep a-collection rubber squeegee no. 600 with connecting nut, a-collection

Ventilation sweep a-collection rubber squeegee no. 600 with connecting nut, a-collection

Art. no.: 3817756V

For two part circular ducts equipped with 2 galvanised connection screws.

Vibration Plates

Vibration Plates

Art. no.: 3820575

Rubber plate / vibration insulator for vibration damping of eg washing machines, pillar drills, transformers etc. Art. 6652902 is ribbed on both sides. Art. 6652911 and 3820575 are smooth on both sides.

Vibration Plates

Mounting angle FZB for rectangular ducts

Mounting angle FZB for rectangular ducts

Art. no.: 19034577

Angle bracket works with both M8 and M10 threaded rods to hang vertical ventilation ducts. With 7 mm and 8.5 mm fastening holes respectively.

Mount.band ffzv

Mount.band ffzv

Art. no.: 232310W

Mounting tape is used for example for suspension of pipes, cable trays, ceilings and ventilation ducts.

Mount.band ffzv

Mount.band r2333

Mount.band r2333

Art. no.: 3817708

Mounting tape is used, e.g., for suspension of pipes, cable racks, sub ceilings, and ventilation shafts. The tape is supplied in 25-metre rolls in a practical cross-tied roll, making it easier to handle at the work site and reducing waste.

Chock-absorber cylindrical a

Chock-absorber cylindrical a

Art. no.: 238663

A complete range of cylindrical dampers for a number of different applications. They can be loaded either with pressure or shear or in combination, taking into account the specific requirements of the current application. Manufactured in natural rubber with hardness 55-60° IHR.

Chock-absorber novibra b

Chock-absorber novibra b

Art. no.: 238680

A complete range of cylindrical dampers for a number of different applications. They can be loaded either in terms of pressure or shear, or both, considering the current special requirements of the application. Manufactured in natural rubber with hardness 40° IHR or 60° IRH.

Chock-absorber novibra c

Chock-absorber novibra c

Art. no.: 238692

A complete range of cylindrical dampers for a number of different applications. They can be loaded either in terms of pressure or shear, or both, considering the current special requirements of the application. Manufactured in natural rubber with hardness 40° IHR or 60° IRH.

Chock-absorber novibra d

Chock-absorber novibra d

Art. no.: 238713

A complete range of cylindrical dampers for a number of different applications. They can be loaded either with pressure or shear or in combination, taking into account the specific requirements of the current application. Manufactured in natural rubber, hardness 55-60° IHR.

Stand pipe, a-collection

Stand pipe, a-collection

Art. no.: 19024660

For more information, refer to our brochure, order no. BRR555.

T-piece 90° for support pipes, a-collection

T-piece 90° for support pipes, a-collection

Art. no.: 19024662

T-stycke 45° för stativrör, a-collection

T-stycke 45° för stativrör, a-collection

Art. no.: 3820505

Angle piece 90° for tripod tube, a-collection

Angle piece 90° for tripod tube, a-collection

Art. no.: 3820520

Angle for square stand system.

Wall bracket for stativrör, a-collection

Wall bracket for stativrör, a-collection

Art. no.: 3820524

Support foot for frame pipes, a-collection

Support foot for frame pipes, a-collection

Art. no.: 19024664

Connector piece, for straight connection of standpipe, a-collection

Connector piece, for straight connection of standpipe, a-collection

Art. no.: 3820538

Splicing piece, for straight splicing of tripod tubes, a-collection

Intermediate piece straight, for tripod tube, a-collection

Intermediate piece straight, for tripod tube, a-collection

Art. no.: 3820546

Intermediate piece straight, for tripod tube, a-collection

Intermediate piece 45°, for tripod tube, a-collection

Intermediate piece 45°, for tripod tube, a-collection

Art. no.: 3820553

Intermediate piece 45°, for tripod tube, a-collection

Gray plastic pipe protection for stand pipes, a-collection

Gray plastic pipe protection for stand pipes, a-collection

Art. no.: 3820561

Pipe cover made of gray plastic for tripod pipes made of gray plastic.

Gray plastic pipe protection for stand pipes, a-collection

Clamp sleeve for ventilation ducts

Clamp sleeve for ventilation ducts

Art. no.: 3817720

For circular ventilation ducts. For attachment to the roof or pendulum or with threaded rod equipped with blade case or attached by L-shaped bracket. Made from FAZ 275 pre-galvanised steel.

Supports for ventilation ducts - fire-rated

Supports for ventilation ducts - fire-rated

Art. no.: 3817733V

For circular ventilation ducts. Can be used in part as a cradle for the suspension of duct channels when attached to the roof using e.g. 2x threaded rods or as a double-sided clamp with single or double attachment. Made from FAZ 275 pre-galvanised steel.

Channel support 120 mm, a-collection

Channel support 120 mm, a-collection

Art. no.: 6650908

Duct support made from 0.7 mm galvanised sheet steel with dimensions of between 80-315. Duct support with dimension of 400 and up made from 0.9 mm galvanised sheet steel. Distance from duct to attachment is 120 mm on all models
dimensions.

Mounting bracket

Mounting bracket

Art. no.: 6651111

Used for suspension of insulated pipe together with clamp sweep. Made from galvanised sheet steel 30x3 mm with two fixing holes Ø 11.5 mm.

Mounting brackets type Jirva for ventilation ducts

Mounting brackets type Jirva for ventilation ducts

Art. no.: 3817716

For ventilation ducts. Made from SIS 1312 material with dimension of 25x1.5mm, Pre-galvanised hole: slot hole 9x30 mm and 3x holes Ø 4.1 mm c/c 25 mm.

Mounting bracket in FZB

Mounting bracket in FZB

Art. no.: 6651310

For suspension of rectangular
duct.

Ventilation duct bracket with rubber damping M8

Ventilation duct bracket with rubber damping M8

Art. no.: 6651130

Vibration-isolated ventilation bracket with built-in rubber plug 8.5 mm for sound-isolating attachment of ventilation ducts. Manufactured in pre-galvanised sheet metal 30x3mm. Can be used for direct installation or with threaded rod M8. The bracket is applied to the load-bearing surface using rivets or screws.

Metal Roof Mounts Type TBH and TBHS

Metal Roof Mounts Type TBH and TBHS

Art. no.: 1511571

Non-damped version with unthreaded hole 10 mm for connection to threaded rod or in rubber-damped version with unthreaded hole 8.2 mm. Pre-galvanised version FFZV. Slotted hole for anchoring in sheet metal roof 8.5x20mm. Height 60, width 40mm. Manages a load of up to 30 kg.

Clamp sleeve for ventilation ducts, acid-proof stainless steel

Clamp sleeve for ventilation ducts, acid-proof stainless steel

Art. no.: 19000432

For circular ventilation ducts. For attachment to the roof or pendulum or with threaded rod equipped with blade case or attached by L-shaped bracket. Manufactured in stainless acid-resistant steel.

Corner cross for support tubes, a-collection

Corner cross for support tubes, a-collection

Art. no.: 6652712

Novibrace Plate

Novibrace Plate

Art. no.: 238746

Dimensions: L600 x B500 mm

Joint Strip ABRA, Sunchem

Joint Strip ABRA, Sunchem

Art. no.: 19057025

Abra joint strip for the manufacture of square ventilation ducts. Meets current safety requirements in VVS-AMA. Comes with sealant in the seam. Made of hot-dip galvanized sheet metal or Zinc magnesium.

Guide Rail Smooth ABRA, Sunchem

Guide Rail Smooth ABRA, Sunchem

Art. no.: 6653361

ABRA guide smooth for joining ventilation ducts, profiled for the ABRA joint. Made of hot-dip galvanized sheet metal or Zinc magnesium.

Sealing Strip ABRA, Sunchem

Sealing Strip ABRA, Sunchem

Art. no.: 6653366

Sealing strip 14x17mm is specially manufactured in a blue fireproof material. For mounting in ABRA joint strip.

Brace Corner ABRA, small, Sunchem

Brace Corner ABRA, small, Sunchem

Art. no.: 6653365

Bracing corner for exterior bracing.

Safety Corner, a-collection

Safety Corner, a-collection

Art. no.: 6653367X

Safety corner for ducting with the ABRA joint. Mounted internally in the joint strip. Made of hot-dip galvanized sheet metal.

Angle Strip, Ahlund

Angle Strip, Ahlund

Art. no.: 6653317

Guide Bracket Ahlund, Plåtprofiler AB

Plåtprofiler AB

Guide Bracket Ahlund, Plåtprofiler AB

Art. no.: 6653330

Guide bracket is also available in stainless and aluminium versions, price upon request.

Inner Corner Ahlund, Plåtprofiler AB

Plåtprofiler AB

Inner Corner Ahlund, Plåtprofiler AB

Art. no.: 6653340

Mounted in the corner of the splice profile for bracing of the duct sides. Corner bar also available in an aluminium version.

Outer Corner Ahlund, Plåtprofiler AB

Plåtprofiler AB

Outer Corner Ahlund, Plåtprofiler AB

Art. no.: 6653350

Mounted over corner mounted on the splice profile.

Channel Supports, Adjustable, ABC Vent

Channel Supports, Adjustable, ABC Vent

Art. no.: 6651012

Duct support which is adjustable in height. It is used to attach ducts to joists, walls or ceilings.
Pre-drilled screw holes are available at heights of 70 mm, 95 mm, 120 mm. Max height is 120 mm.
The duct support is equipped with a fixing hole in the bottom.

Small Brace Corner, a-collection

Small Brace Corner, a-collection

Art. no.: 6653365X

Brace corner for external bracing. Mounted on the outside of the duct. In small design.

Safety Corner ABRA, Sunchem

Safety Corner ABRA, Sunchem

Art. no.: 6653367

ABRA Safety corner for braceing up channels with the ABRA joint. Mounted internally in the joint strip. Made of hot-dip galvanized sheet metal.

Brace Corner, large, a-collection

Brace Corner, large, a-collection

Art. no.: 6653368X

Brace corner for external bracing. Mounted on the outside of the duct. Large design.

Plåtprofiler AB

Joint Profile Ahlund, Plåtprofiler AB

Art. no.: 6653308

Joint profile Ahlund in galvanized or acid-resistant stainless steel design.

Outer Corner, a-collection

Outer Corner, a-collection

Art. no.: 6653370X

Mounted over the corner mounting on the joint profile.

Ventilation sweep without rubber, Ergofast

Ventilation sweep without rubber, Ergofast

Art. no.: 3878536

Ventilation sweep without rubber, Ergofast

Ventilation sweep with rubber, Ergofast

Ventilation sweep with rubber, Ergofast

Art. no.: 3878501

Showing 52 of 111