Order lines: 0

Ahlsell Products Electric Telecoms, Data, Security 50-6350 Telecoms and Fibre optic

50 Telecoms and Fibre optic

Air blown fiber

Fiber ducting and accessories

Data cabinet 19"

Fiber box - ODF

Fibre components

Telecoms and alarm terminals

Do you work with Telecom, Data, or security? Ahlsell helps you find the products within security and integration. Whether you work in electrical engineering, burglar alarms, or access systems, we have the range you need. Here you will find fiber optics, telephony, antenna material, and power supply for installation, along with smart solutions from major suppliers. Explore our wide selection here in the online store or visit your nearest Ahlsell store.

Quick coupling MPB30601 Enhua, Hexatronic

Quick coupling MPB30601 Enhua, Hexatronic

Art. no.: 5040026

Micro duct splice connections are used to connect two micro ducts with a push -fit connector on the duct. The splice is easy and only takes a few seconds. The connection is transparent to facilitate inspection of the micro cables passing through. The connection is constructed to withstand continuous pressure of at least 10 bar during installation without air leaks in order to enable cable jetting.

Microduct Thick-walled DB12 7/3.5, Emtelle

Microduct Thick-walled DB12 7/3.5, Emtelle

Art. no.: 5041245

Microducts for direct extension in the ground. Can be installed as single pipe or in bundles from 2-24 microducts! 7 mm is ideal for FTTH installation the last section out to customer. The micro-tube is blown with Emtelle’s air blown fibre. Alternatively other air blown fibre or micro cable up to approx. Ø 2.6 mm. Transparent sheaf with white, red, green, orange or yellow marking on the sheath. Ability to tailor text. Delivery in disposable wooden drums.
Items which are "branded Skanova" may only be used in Skanova installations.
Colour palettes, tubes see below.

Microduct IDSG 3/2 Fire classed Indoors MPB30243,Hexatronic

Microduct IDSG 3/2 Fire classed Indoors MPB30243,Hexatronic

Art. no.: 5040550

Micro-tubes, 3 mm, with inner low-friction surface and outer flame-retardant halogen-free jacket, for indoor painting on premises with blowing length up to 300m. The sleek design provides for easy, flexible installation when using existing ducting. Transparent numbered pipes simplify identification during blow-in. Fire classification F2, available in single, 7, or 12 pipe versions.

Microduct IDSG 3/2 Fire classed Indoors MPB30243,Hexatronic

Microduct IDSG 3/2 Fire classed Indoors MPB30243,Hexatronic

Terminal kit Krone

Terminal kit Krone

Art. no.: 5010449

Terminal kit, KRONE on DIN rail.

Terminal kit Krone

Duct connection, Hexatronic

Duct connection, Hexatronic

Art. no.: 5044604

Clutch for ducts. Robust design, approved for placing directly in the ground.

Fibre splice connectors Single mode OS2, Eurolan

Fibre splice connectors Single mode OS2, Eurolan

Art. no.: 5063788

Eurolan offers a complete range of fiber optic adapters that are adapted to be used in fiber optic networks with high performance requirements. Used as a joint in fiber panel or fiber outlet between pigtail and patch cabling. The singlemode connectors are available in several designs for both SC and LC connectors. The joint pieces are manufactured with a ceramic sleeve and can handle at least 500 connections and disconnections. Included in the Eurolan system warranty.

Fibre splice connectors Single mode OS2, Eurolan

Fibre splice connectors Single mode OS2, Eurolan

Fibre splice connectors Single mode OS2, Eurolan

Fibre splice connectors Single mode OS2, Eurolan

Fibre splice connectors Single mode OS2, Eurolan

Microduct Thick-walled DB1 14/10, Hexatronic

Microduct Thick-walled DB1 14/10, Hexatronic

Art. no.: 5041457

Micro-duct 14/10 mm with a solid inner low-friction surface for the best installation performance, for blowing micro-cable. Intended for installation directly in the ground or in cable shafts.

Microduct Thick-walled DB1 14/10, Hexatronic

Microduct Thick-walled DB1 14/10, Hexatronic

Microduct Thick-walled DB1 14/10, Hexatronic

Microduct Thick-walled DB1 14/10, Hexatronic

Microduct Thick-walled DB1 14/10, Hexatronic

Detachable cable seal for micro-products, Hexatronic

Detachable cable seal for micro-products, Hexatronic

Art. no.: 5042095

Divisible cable seal for Micronet™ products

Splice sleeve Caladen, Hexatronic

Splice sleeve Caladen, Hexatronic

Art. no.: 5041744

Pipe splice sleeve for ducts.

Wall stand 19", MP-Bolagen

Wall stand 19", MP-Bolagen

Art. no.: 5002148

Telecom stand is a mounting kit consisting of a 19" basic frame according to SS IEC 297. Screws for assembly included. The front has holes for cage nuts M6 and the back holes 6.5 x 31.75 mm for M6-screws and nuts.

Splice for Micro tube outdoor, Eurolan

Splice for Micro tube outdoor, Eurolan

Art. no.: 5044251

Duct joint for interconnecting blown fibre tubes outdoors

Splice for Micro tube outdoor, Eurolan

Quick coupling DI, Melbye

Quick coupling DI, Melbye

Art. no.: 5042412

Union coupling for micro-tubes. Transparent. Work pressure 15 bar, Temperature range -15 ° to + 45 ° C, IP68, Fire classification according to UL94 V-2, Complies with ISO 14743. 100% pressure tested after production.

Fibre Pigtail Multimode OM3 50/125, Eurolan

Fibre Pigtail Multimode OM3 50/125, Eurolan

Art. no.: 5072316

Eurolan fiber pigtails are manufactured to be used for fiber optic networks with high requirements, where quality and functionality are decisive factors. The termination method is in accordance with current specifications and the work is carried out under controlled conditions. Each Eurolan fiber pigtail is visually inspected and measured for passing results to become an approved product. The products are specially adapted for FTTX installations. Eurolan fiber cabling is supplied with a 0.9mm outer jacket. Eurolan fiber cabling is supplied with fixed secondary protection. Supplied with measurement protocol. Has a maximum attenuation of 0.3dB per contact. Included in the Eurolan system warranty. Multimode fiber according to the specifications in UL OFNR/FT4

Fibre Pigtail Multimode OM3 50/125, Eurolan

Fibre Pigtail Multimode OM3 50/125, Eurolan

Fibre Pigtail Multimode OM3 50/125, Eurolan

Wall stand 19" Eurolan

Wall stand 19" Eurolan

Art. no.: 5001025

The Eurolan Relay Rack is a full-height wall stand with cage nut hole image. The stand is 42U and comes with 4 mm 700 mm or 500 mm wall brackets.
The stand is made of steel sheet and meets the RoHS directive.

Microduct IDSG 5/3.5 Reinforced indoor, Hexatronic

Microduct IDSG 5/3.5 Reinforced indoor, Hexatronic

Art. no.: 5042915

Micro-ducts with a jacket of halogen-free, flame-retardant material. The micro-ducts have a solid inner low-friction surface for the best installation performance. Number-marked and coloured pipes for simple identification

Data stand 19", a-collection

Data stand 19", a-collection

Art. no.: 5005000

Stand and accessories for installation of 19" equipment, suitable for both small networks and large data halls. The stand is divisible, which gives numerous options and is supplemented with a wide range of accessories.
The stand is delivered complete with 4 adjustable brackets.

Data stand 19", a-collection

Data stand 19", a-collection

Blank plug for ODF SC, Eurolan

Blank plug for ODF SC, Eurolan

Art. no.: 5062860

Eurolan Dust caps are used as ODF blind plugs for non-used holes.

Blank plug for ODF SC, Eurolan

Fibre optic cabling SM Duplex SC/APC-LC/UPC OS2 9/125

Fibre optic cabling SM Duplex SC/APC-LC/UPC OS2 9/125

Art. no.: 5076433

Eurolan Fiber cables are manufactured to be used for fiber optic networks with high requirements, where quality and functionality are decisive factors. The termination method is in accordance with current specifications and the work is carried out under controlled conditions. Each Eurolan fiber cable is visually inspected and measured for acceptable results to become an approved product. The products are specially adapted for FTTX installations. Eurolan fiber cabling is supplied with a 2.0mm outer jacket. Eurolan fiber cabling is supplied with a halogen-free outer jacket Supplied with a measurement protocol Has a maximum attenuation of 0.3dB per contact. Included in the Eurolan system warranty. Color coding on cable; 9/125 Yellow. All connectors have a "zirconia ferrule" and meet the specifications in TIA/EIA-568.3, Bellcore GR-02. Measurement protocol comes with each individual cable and is packaged together in a bag. Glass G657A1.

Fibre optic cabling SM Duplex SC/APC-LC/UPC OS2 9/125

Microduct DB2 2x14 / 10 LF

Microduct DB2 2x14 / 10 LF

Art. no.: 5045273

Bundled micro pipes DBMF 2 (2x14/10mm) for direct installation in the ground. Used as a duct for blowing in blown fiber or cable with OD <8mm

Microduct DB2 2x14 / 10 LF

Microduct DB2 2x14 / 10 LF

Splice box Multiflex 24, Tykoflex

Splice box Multiflex 24, Tykoflex

Art. no.: 5084348

Optic-terminal block Multiflex 24F and 48F is a versatile indoor block for termination and/or splicing of optic cables. The block can be mounted horizontally or vertically and on walls or stands, and is suited to all types of non-reinforced optic cables. The block can house two Multi cassettes for fibre splicing. The cassette can also be used for storage of open type splitters. The block has two separate sections separated by a contact panel that forms the interface between inbound and outbound connections. These constitute the block’s line side and respective client side. Both sections have a lockable cover. The line side’s cover, when folded down, acts as a workstation for splicing. The cover for the client side is removable, thus offering good accessibility for installation and servicing. The block is equipped with 10 cable entries, six at the bottom and two plugged on each side.

Installation kit ODF, TD Fiberoptik

Hexatronic Fiberoptic

Installation kit ODF, TD Fiberoptik

Art. no.: 5057843

P/N: 5276. For splicing up to 96 fibres, loose tube or ribbon. Lacquered steel. Colour coral white, structural lacquer.

Floor cabinet 19" with glass door 60F, Eurolan

Floor cabinet 19" with glass door 60F, Eurolan

Art. no.: 2599281

Eurolan Floor cabinet is intended for active and passive network equipment in broadband or office networks. Grounding kit and leveling legs included. Max load: 600 kg Front door: Tinted glass with metal frame or all metal, both with locking function. The removable door can be opened both to left and right and can be easily changed depending on which direction you prefer Rear door: Metal, with locking function.
Upper cover plate: Ventilation holes in the ceiling of the cabinet. Fan module can be mounted on the inside of the roof. Bottom: The cabinet can be placed directly on the floor, on the supplied level feet or on wheels (not included).
19" tracks: Zinc-coated steel tracks, adjustable in depth. Cable entries: A width-adjustable entry with thick rubber edges at the bottom and the possibility of cable entry in three places in the ceiling. They are provided with plastic washers that can be removed if necessary. Grounding: The frame and the removable components are equipped with ground plates. Painting: High-quality powder paint. Color: Light gray 7035 (metal side panels) Delivery: Assembled, in a box.

Floor cabinet 19" with glass door 60F, Eurolan

Cable seal

Art. no.: 0666488

Cable sealing for ground pipes.

Fibre optic cabling SM Duplex SC/APC-LC/UPC OS2

Fibre optic cabling SM Duplex SC/APC-LC/UPC OS2

Art. no.: 5070814

Prefabricated and measured cross-connection cables of the highest quality. The sheath consists of halogen-free and flame-resistant plastic. Available in the double (duplex) design with two contacts at each end. UPC means reflection attenuation better than 50 dB and APC better than 60 dB.

Fibre optic cabling SM Duplex SC/APC-LC/UPC OS2

Intermediate piece Single mode SC, Nexans

Intermediate piece Single mode SC, Nexans

Art. no.: 5063993

Fibre optic intermediate pieces designed to connect together two fibre optic contacts in a fibre optic panel. The ceramic control socket inside the intermediate piece ensures highest accuracy when joining two fibre optic contacts.
Different types of intermediate pieces are available for different types of distribution frame panels. Suits all Nexan’s different distribution frame boxes type KB112, KB201 and KB401 as well as wall-mounted cabinets.

Intermediate piece Single mode SC, Nexans

Intermediate piece Single mode SC, Nexans

Intermediate piece Single mode SC, Nexans

Intermediate piece Single mode SC, Nexans

Microduct sealing detachable, Hexatronic

Microduct sealing detachable, Hexatronic

Art. no.: 5043218

The divisible microtube repair kit provides a gas and waterproof microtube connection. This kit is mainly used in the repair of damaged microtubes. It can also be used as a temporary and detachable coupling for applications where so-called "bypass" pipes are used to create excess microcable in cable wells and cabinets.

Fibre optic cabling Villapatch SM Simplex SC/UPC-SC/UPC, Eurolan

Fibre optic cabling Villapatch SM Simplex SC/UPC-SC/UPC, Eurolan

Art. no.: 5069015

Villapatch cable is used as a connection cable at home to connect fibre outlets with active equipment.

Cable sealing Gas and Waterproof

Cable sealing Gas and Waterproof

Art. no.: 5045554

Split cable seal for gas- and water-tight sealing of cables in miniducts. The seal is easy to mount on both new and existing installations. Thanks to the smart design, you can now easily get a seal between cable and duct and due to the compact design, the seals can be installed in any situation, even in hard-to-reach places.

Cable sealing Gas and Waterproof

Cable sealing Gas and Waterproof

Cable sealing Gas and Waterproof

Splice for Micro tube indoor, Eurolan

Splice for Micro tube indoor, Eurolan

Art. no.: 5044250

Duct joint for interconnecting blown fibre tubes indoors

Wall enclosure 19" W3

Wall enclosure 19" W3

Art. no.: 2504186

W3 is a wall cabinet series with a very good price/performance ratio. The cabinet's construction also provides very good accessibility and large installation depths. The cabinet series is useful for passive components.

Wall enclosure 19" W3

Shelf panel 19" 60A, Eurolan

Shelf panel 19" 60A, Eurolan

Art. no.: 2598584

Eurolan racking is intended to handle network equipment that can’t be fixed in 19" profiles. Max 50KG
All racking is manufactured in light grey (RAL 7035) powder-coated steel.

Splice box TD S4 incl 2 cassettes, TD Fiberoptik

Hexatronic Fiberoptic

Splice box TD S4 incl 2 cassettes, TD Fiberoptik

Art. no.: 5060783

Flexible wall box for subscriber connection in FTTX projects. The box contains a cassette for splicing and has room for 4 SC simplex spacers. The IP55 rating makes the box a perfect choice for outdoor installations such as. on a villa facade. The box is UV-protected.

Splice box TD S4 incl 2 cassettes, TD Fiberoptik

Microduct Thick-walled DB7 14/10 S12, Hexatronic

Microduct Thick-walled DB7 14/10 S12, Hexatronic

Art. no.: 5041332

Micro-duct 14/10 mm with a solid inner low-friction surface for the best installation performance, for blowing micro-cable. Intended for installation directly in the ground or in cable shafts

Cable seals detachable 10-20 mm gas-tight, Emtelle

Cable seals detachable 10-20 mm gas-tight, Emtelle

Art. no.: 5041165

This dividable cable seal is a popular option for "midspan" blowing, but also when you want to ensure effective gas and waterproofing in both new and existing installations.

Cable seal divisible Gas and Waterproof

Cable seal divisible Gas and Waterproof

Art. no.: 5045539

Split cable seal to provide an effective and simple solution for all gas and watertight duct sealing requirements in both new and existing installations. Due to the compact design, the seals can be installed in any situation, even in hard-to-reach places.

Cable seal divisible Gas and Waterproof

Cable seal divisible Gas and Waterproof

Cable seal divisible Gas and Waterproof

Cable seal divisible Gas and Waterproof

Cable seal divisible Gas and Waterproof

Power strip, 19" manufacturer Brennenstuhl

Power strip, 19" manufacturer Brennenstuhl

Art. no.: 2403370

8-way branch socket with fastening angles for mounting in 19" rack.
6-way branch socket with replaceable 10A fuse and overvoltage protection up to 30 kA.

Microduct Thick-walled DB2 14/10 S12, Hexatronic

Microduct Thick-walled DB2 14/10 S12, Hexatronic

Art. no.: 5041637

Micro duct 14/10 mm with a solid internal low friction surface for best installation performance when blowing in micro cable. Intended for direct laying in the ground or installation in cable shafts

Microduct Thick-walled DB2 14/10 S12, Hexatronic

Microduct Thick-walled DB2 14/10 S12, Hexatronic

Patch cable villa 1XSC / APC-SC / APC

Patch cable villa 1XSC / APC-SC / APC

Art. no.: 5069023

Eurolan villa patch cable is used as a connection cable in the home to connect fiber sockets with active equipment. Extra flexible.

Patch cable villa 1XSC / APC-SC / APC

Welding sockets, Eurolan

Welding sockets, Eurolan

Art. no.: 5062054

The Eurolan FO sleeve is a protective sleeve for fibre seams.

Welding sockets, Eurolan

Welding sockets, Eurolan

LF Optical fibre tubes single on multi-compartment ducts, Emtelle

LF Optical fibre tubes single on multi-compartment ducts, Emtelle

Art. no.: 5040768

LF optic tube 32/28 for optic cable. Black with green stripes.

Splice holder self-adhesive, Nexans

Splice holder self-adhesive, Nexans

Art. no.: 5062708

N3Sself-adhesive splice holder" is used as a splice holder for N3S splice module. The holders are used for both ribbon fiber and single fibres. Each splice module uses 24 splice holders (3/cassette)

Splice holder self-adhesive, Nexans

Cage nut type CN, Eldon

Cage nut type CN, Eldon

Art. no.: 2515523

Cage nuts for 19" profile. Size M6. for installation in materials with a max. material thickness of 2 mm
Items in delivery: 50 item kit

Micro-product fire-resistant according to IEC 60332-1

Micro-product fire-resistant according to IEC 60332-1

Art. no.: 5044230

Eurolan indoor microducts for blown fiber installations in dimension 5 / 3.5. The microducts are fire rated according to IEC 60332-1. They are available in sizes 1, 4, 7, 12, 19, 24.

Micro-product fire-resistant according to IEC 60332-1

Micro-product fire-resistant according to IEC 60332-1

Micro-product fire-resistant according to IEC 60332-1

Micro-product fire-resistant according to IEC 60332-1

Micro-product fire-resistant according to IEC 60332-1

Data rack 19" adjustable depth

Data rack 19" adjustable depth

Art. no.: 5002123

MP-19" -stand- zinc plated is an assembly kit that has two standards for the same stand – data on the one hand in accordance with SS IEC 297 with hole cage nut M6.

Switch cabinet NOD

Switch cabinet NOD

Art. no.: 5060617

Eurolan node cabinet for fiber optic outdoor installations FTTX. Version 1X19 "with 21HE.

Fibre panel ODF LightMate 1u Fixed SC, TD Fiberoptik

Hexatronic Fiberoptic

Fibre panel ODF LightMate 1u Fixed SC, TD Fiberoptik

Art. no.: 5057836

ODF for 19" stand
Height 1u, depth 250 mm.
Lacquered steel plate with corrosion-proof front. Colour coral white, structural lacquer
Cable diameter 5-18 mm.
Optional cable entry, left or right side.
The front is 30 mm recessed from the mounting point of the box - allows greater bend radius for the patch cable.
Installation kit shall be ordered separately.

Termination box/Joint box T405, Tykoflex

Termination box/Joint box T405, Tykoflex

Art. no.: 5084442

ODF 19" T405 termination block/splice box supplied with with extractable front block and detachable cover enables easy inlaying of fibres and cleaning of contacts. The box has a front panel for different types of connections, SC, FC, ST etc. When splicing the box is armed with one or two multi cassettes which are ordered separately. 192 fibres maximum can be terminated and when laying 96-192 fibres the fibre pulling is well protected via inlets in the bottom of each unit.

Fibre panel ODF KB112, Nexans

Fibre panel ODF KB112, Nexans

Art. no.: 5025883

Fibre optic distribution frame boxes of type KB112 are designed for 48 fibres, but up to 4 x KB112 boxes can be assembled together. This makes it possible to install max. 192 fibres by taking off the cover/bottom of the boxes and using installation brackets KB112.
In each KB112, up to 4 cassettes (8 splice holders) are used, which corresponds to 48 fibre splices. KB112 can be assembled in a stand/cabinet with a min. depth of 400 mm. Panel plate is sold separately.

Fibre panel ODF-unit 19" SC, Nexans

Fibre panel ODF-unit 19" SC, Nexans

Art. no.: 5055093

Nexan’s ODF unit 19" SC is supplied complete with panel plate, cable fastening and splice holder for termination of fibre optic cable. The product builds 3U 19" and is suited to SC duplex intermediate pieces.

Fibre panel ODF-unit 19" SC, Nexans

Microduct thick-walled DB 7/3.5

Microduct thick-walled DB 7/3.5

Art. no.: 5044239

Microtubes for direct placement in the ground. These are adapted for installation (blowing) of blown fiber and / or microcable

Microduct thick-walled DB 7/3.5

Microduct thick-walled DB 7/3.5

Microduct thick-walled DB 7/3.5

Microduct thick-walled DB 7/3.5

Microduct thick-walled DB 7/3.5

Fibre panel ODF, Eurolan

Fibre panel ODF, Eurolan

Art. no.: 5057975

ODF 24xSCD 19 Unequipped is a fibre optic terminal block for 19" assembly on 1 HE. ODFen has hole spacing for 24 x SC duplex or 24 x LC-quad adapters for panel mounting, with snap fixture.
ODFen is extractable to facilitate installation, cleaning and troubleshooting, and is easily pulled out after loosening two thumbscrews on the front side. In pulled-out position, full accessibility is given to the splice and distribution bay. ODFen is equipped inside with a M4 screw pin with a thumb nut for easy assembly of accessories, splice cassettes and similar, as well as 4 x self-adhesive cable holders for organising fibre loops. Alternatively, the block can be equipped with our self-adhesive smouv holder, which gives a complete and affordable solution for installation of pigtails (pre-assembled fibre pigtails) in ODFen. ODFen is made of powder-coated sheet steel and meets the RoHS directive. Eurolan Dust caps are used as ODF blind plugs for non-used holes. The Eurolan FO sleeve is a 45/60 mm protective sleeve for fibre splices.

Fiber panel ODF 24xLCD 19" 1HE Black, Eurolan

Fiber panel ODF 24xLCD 19" 1HE Black, Eurolan

Art. no.: 5055300

Eurolan fiber panel (ODF) in 19" version. Space for 24 SC simplex or 24 2xLC spacers. Prepared for cable shelf e-nr 5055301. Pull-out to simplify installation, cleaning and troubleshooting and is easily pulled out after loosening two thumb screws on the front. The ODF comes with: 2 splicing cassettes, 24 fastfit adapters for better stability of intermediate pieces, 48 screws for fixing intermediate pieces, M6 screws, 1 pc PG13.5, 1 pc PG16, 6 pcs self-adhesive cable holders for arranging fiber loops and 4 cable ties.

Showing 52 of 398