Order lines: 0

Ahlsell Products ElectricSolar energy

Solar energy

Mounting systems

Installation material

Solar cell package

Solar energy Cable & Hose

Cable ladders & wire ladders for solar systems

Cable protection & Cable ties

Ahlsell helps you find products within solar cells and battery storage. Whether you work with commercial properties or private housing, we have the range for your needs. Here, you will find photovoltaic panels, optimizers, and accessories for easy installation, along with smart photovoltaic panels from several major suppliers. We also offer combination packages and fastening systems for solar cells. Explore our range of solar cells and accessories here or visit your nearest Ahlsell store.

Cable ladder MP-S, Sendz

Cable ladder MP-S, Sendz

Art. no.: 1115029

Cable ladder type MP-S made of sendzimir fözinc sheet intended for environmental class max C2, such as industry, schools, offices, etc. The length of 3 m makes it easy to handle in tight spaces. The ladder is 3 meters long as standard, which makes it easy to handle in tight spaces, also available as 6 m length.

Solar panel Eurener 450W, black

Solar panel Eurener 450W, black

Art. no.: 2740124

Solar panel - monocrystalline, half cell, Eurener MEPV 450 black. Black frame, black backsheet. IP67/IP68 according to standard IEC 60529. Fire safety class I approved (UNI 9177). 3.2 mm thin tempered glass with high strength. Extra clear with low iron content. Frame with ground hole, robust and resistant to corrosion. In black anodized aluminum 0.015 mm.

Solar panel Eurener 450W, black

Safety switch a-collection 16-25 A

Safety switch a-collection 16-25 A

Art. no.: 3135760

Encapsulated circuit breakers / disconnectors according to IEC 60947-3 also for use as safety switches where required. Made of polycarbonate with good impact strength both in cold and at high temperatures and retains its properties well even after long-term outdoor exposure. Resistant to weak acids, aliphatic hydrocarbons, paraffin, alcohols (without methanol).

Safety switch a-collection 16-25 A

Cable ties black, a-collection

Cable ties black, a-collection

Art. no.: 1520224

Ties for organizing cables, light fixings and nagging. Black ribbons have some UV resistance, which means that they can be exposed to sunlight for a longer time than natural ones. Opened bag should be used as soon as possible because dehydration impairs the elasticity of the bands. Halogen-free, flammability class UL94 V2. Withstands continuous temperature -40°C to +85°C after installation.

Cable ties black, a-collection

Fire department switch TW-RSD150-40

Fire department switch TW-RSD150-40

Art. no.: 2740876

Enclosure with fire department switch and indicator light. This enclosure breaks the feed between the solar panels and the inverter. In the event of fire or other danger, the Rescue Service uses an emergency stop (Tex BRYT-1-SOL, E2740830) to separate the solar panels from the inverter. Easy installation via MC4 connectors. Powered via 230VAC.

Fire department switch TW-RSD150-40

Fire department switch TW-RSD150-40

Attachment plate waterproofing roof, CW Lundberg

Attachment plate waterproofing roof, CW Lundberg

Art. no.: 19058037

Mounting rail for solar panel

Mounting rail for solar panel

Art. no.: 2740940

The rail is designed to be mounted on various MAFI roof brackets or directly on trapezoidal sheet metal roofs with EPDM. Made of Magnelis ® and it is IP protected. One rail fits all, designed to be used on all types of roofs which facilitates installation and logistics. The rail enables cable routing inside the rail without any damage from the Multi Clamp.

MAFI provides products with the CE mark, which certifies that they are in line with EU directives on safety, health and environmental protection, and underlines our commitment to the highest levels of quality and commitment.

Mounting rail for solar panel

Mounting rail for solar panel

Wire trunking Z4, 2500 mm

Wire trunking Z4, 2500 mm

Art. no.: 1116404

Mesh tray with Z4 surface coating, a mixture of e.g. zinc and aluminium, for easy installation. Several of the accessories are shared with other parts of the MP range, with hot-dip galvanised surface protection. Can be ordered in any painted colour.

Attachment Rail Solar System, Weland Stål

Attachment Rail Solar System, Weland Stål

Art. no.: 19056474

Attachment Rail Solar System, Weland Stål

Solar cell connector MC4

Solar cell connector MC4

Art. no.: 5288986

Solar contact of MC4 model, crimping. Suitable for cable 3-6 mm.

Solar cell connector MC4

Solar cell connector MC4

End and middle clamp height 28-45

End and middle clamp height 28-45

Art. no.: 2740949

The Multi Clamp is designed to attach solar panels to the Solar Rail. It has a clamping zone of 50 mm to meet the requirements of some solar panel manufacturers and all parts are black coated for optimal aesthetics.

Multi Clamp is IP protected. One clamp fits all, the Multi Clamp is designed to be used as both an end and center clamp and it fits all panels with a frame height of 28-45mm. The Multi Clamp is easy to slide along the Solar Rail and it is designed to prevent damage to cables or MC4 connectors inside.

MAFI provides products with the CE mark, which certifies that they are in line with EU directives on safety, health and environmental protection, and underlines our commitment to the highest levels of quality and commitment.

Splicing kit for trail

Splicing kit for trail

Art. no.: 2740942

Joint kit for MAFI's solar panel rail. The splicing kit enables you to splice and extend the mounting rails. For the joint kit, you need 220010106 Flange screw M8x20, 220010107 Quick mount M8 and 220010111 Magnet sleeve 8mm. -

Nut clip M8

Art. no.: 1533859

A unique clamping nut that facilitates assembly. Used with 9834.

End cap for solar panel rail

End cap for solar panel rail

Art. no.: 2740944

The end cap is designed to cover sunny ends and comes in black color for optimal aesthetics. The material withstands the Nordic climate, is UV resistant and free from toxic chemicals. The end cap is made of a flexible material and has beveled edges for easy installation even on uneven edges after the Solar Rail has been cut.

MAFI provides products with the CE mark, which certifies that they are in line with EU directives on safety, health and environmental protection, and underlines our commitment to the highest levels of quality and commitment.

Solar panel mount roof tiles

Solar panel mount roof tiles

Art. no.: 2740936

Universal batten bracket for concrete and clay brick boilers. The minimum dimension of the support batten is 23x36 mm. Solar Rail can be installed both vertically and horizontally. When installed horizontally, the bracket has a versatile hole pattern to match the panel clamping zone and a stop hook to temporarily support the Solar Rail prior to installation. MAFI provides products with the CE mark, which certifies that they are in line with EU directives on safety, health and environmental protection, and underlines our commitment to the highest levels of quality and commitment.

Flange Bolt M8 x 20

Flange Bolt M8 x 20

Art. no.: 1533858

A unique M8 bolt used with 9839. HEX 8.

Gateway - Checkwatt CM10

Gateway - Checkwatt CM10

Art. no.: 2741365

CheckWatt CM10 is a gateway for logging meter and sensor data as well as automatic control with connection to CheckWatt's cloud services via LAN and/or built-in 4G modem. CM10 is mounted on a DIN rail and is 6 modules wide. CheckWatt CM10 has several areas of use within data logging, communication and automatic control. Devices compatible with CheckWatt CM10 include energy meters, water meters, solar power, battery storage, wind power, temperature sensors and solar radiation sensors. Protocols for communication include ModbusRTU, ModbusTCP, MQTT, pulse/S0, digital I/O, IEC 60870-5-103

Hybrid inverter ASWKH-T2

Hybrid inverter ASWKH-T2

Art. no.: 9800653

The ASW H-T2/T3 three-phase hybrid inverter series is the ultimate solution for residential and small-scale commercial and industrial installations. Elevate your solar experience with Solplanet's ASW H-T2/T3 series – where elegance meets unwavering performance.

Behind its sleek facade is a powerhouse with 100% unbalanced three-phase AC output under EPS mode, optimizing system efficiency for varying loads. Our integrated smart customizable software allows you to effortlessly manage battery functions in DOD mode, usage time and power settings. Experience lightning fast UPS level switching in under 10ms. Installation is a breeze with basic tools, thanks to Solplanet's commitment to user-friendly products, and the IP66-certified design ensures worry-free installation indoors or outdoors.

The ASW 05-12kH-T2/T3 series of solar inverters embody power and versatility. With up to 150% PV array oversizing, these inverters maximize yield. 100% unbalanced three-phase AC output under EPS mode and a UPS-level switching time under 10ms, guarantee uninterrupted performance. The IP66 rated design ensures durability for outdoor use. A minimum DC input of 60V and a wide MPP voltage range ensure optimized energy performance, making these inverters ideal for various rooftop PV systems, accommodating varying designs, scales and purposes of dynamic efficiency.

The ASW 05-12kH-T2/T3 series are designed to be wall mounted and easily installed with standard tools and Phoenix Contact PV connectors make these inverters compatible with a wide range of solar panels. Optional Plug & Play dongles connect them to the internet and allow up to five to be monitored by Solplanet's user-friendly mobile application. Users can view real-time solar installation data, configure their inverters and receive system alerts right in the palm of their hand.

Hybrid inverter ASWKH-T2

Hybrid inverter ASWKH-T2

Connector MC4 EVO2 4-6 mm²

Connector MC4 EVO2 4-6 mm²

Art. no.: 2741752

Connector MC4 EVO 2 with crimp connection for solar installations. For cable area 4-6mm². Use crimping tool E2740096. For 1500 V DC.

Note: Stäubli MC4 Original and MC4-Evo 2 both belong to the MC4 family and are thus plug-compatible with each other, then with a rated voltage of 1000V DC.

Connector MC4 EVO2 4-6 mm²

Connector MC4 EVO2 4-6 mm²

Connector MC4 EVO2 4-6 mm²

Plastic cap, Weland Stål

Plastic cap, Weland Stål

Art. no.: 19052079

Plastic cap, Weland Stål

Plastic cap, Weland Stål

Plastic cap, Weland Stål

Cable tie natural a-collection

Cable tie natural a-collection

Art. no.: 1520200E

Ties for organizing cables, light fixings and nagging. Opened bag should be used as soon as possible because dehydration impairs the elasticity of the bands. Halogen-free, flammability class UL94 V2. Withstands continuous temperature -40°C to +85°C after installation.

Cable tie natural a-collection

EnergyHub 14

Art. no.: 5289206

EnergyHub Wall 14 kW inverter with 20A phase balancing. Wall variant that is hung on the wall. Including 100A current transformer kit

Cable ties with edge clips across the edge

HellermannTyton

Cable ties with edge clips across the edge

Art. no.: 1517277

Bottom band with edge clips across the edge for mounting on top of plastic or sheet metal edges of 1-3mm. These cable ties and edge clips are suitable for use where drilling is not possible or where temperature conditions mean that self-adhesive brackets do not work. These belts are used as fixing of cables, hoses, pipes in the automotive industry, cable manufacturing, cabinet construction and other industries. The cable tie is also well suited for installing solar energy.

Rack Energyhub, Ferroamp

Rack Energyhub, Ferroamp

Art. no.: 5289420

EnergyHub XL Rack cabinet that includes an EnergyHub XL 28 kW module in the package (except item 5289514, where 21kW Energyhub is included!). Has space for EnergyHub XL modules up to a total of x kW (according to the table below) installed power.

Rack Energyhub, Ferroamp

Inverter Sungrow

Inverter Sungrow

Art. no.: 2740143

Inverter, mechanical cooling.

Inverter Sungrow SG series

Inverter Sungrow SG series

Art. no.: 2741276

Inverter Sungrow, 3-phase

Inverter Sungrow SG series

Adjustable Terrace Foot

Adjustable Terrace Foot

Art. no.: 763150

Fold attachment Solar System, Weland Stål

Fold attachment Solar System, Weland Stål

Art. no.: 19051010

Solar collector bracket, CW Lundberg

Solar collector bracket, CW Lundberg

Art. no.: 19055206

Bracket Solar System, Weland Stål

Bracket Solar System, Weland Stål

Art. no.: 19052574

Bracket Solar System, Weland Stål

C-Profile Solar System, Weland Stål

Art. no.: 19052575

Wire trunking Mini B30-D

Wire trunking Mini B30-D

Art. no.: 1149112

The mini step can be used in many different situations for example as cable ducting in miniature, directly against the mounting surface and in confined spaces.
It gives extra mechanical protection for cables in vulnerable areas, but even good accessibility since the cables lie open.
To hold cables in place without twining they can be pressed together in the upper edge with a tong.
Installed either with a splice connector B20 directly against the base, or with spacers B22. It can even be welded directly into the base surface.
The wire cable tray can be easily formed according to requirements with wire cutters for example.

Safety switch SA with built-in tension relief

Safety switch SA with built-in tension relief

Art. no.: 3164300

Safety switch for surface mounting.
Equipped with built-in strain relief for one or two outgoing connection lines and 3 cable entries in the upper and lower edge.
•Ground and neutral rail as standard, only ground rail on 4-pole switches
•Normal signs are supplied as standard
•16A AC23A, 500V
•7.5 kW motor power at 400V
•IP54
•Connection area 6 mm2
• Cable entry membrane 6x16 mm and knockout in the back
Housing colour: White = DV, Gray = DG, Black = DS or Falur red = DR, H=Auxiliary contact, Side operated lockable knob.
E-numbers 3134548-3134551 and 3134599: Self-extinguishing material according to UL 94-5V for agriculture

Safety switch SA with built-in tension relief

Safety switch SA with built-in tension relief

Safety switch SA with built-in tension relief

Safety switch SA with built-in tension relief

Safety switch SA with built-in tension relief

Screw Kit, Weland Stål

Screw Kit, Weland Stål

Art. no.: 19052115

Screw Kit, Weland Stål

Screw Kit, Weland Stål

Screw Kit, Weland Stål

Screw Kit, Weland Stål

Screw Kit, Weland Stål

Wire trunking Mini B30-I

Wire trunking Mini B30-I

Art. no.: 1149111

This flat variant works especially flexibly to staple the cables directly on the wall or machine. The mini step requires meaningfully fewer fixed points than a solitary cable.
The step is easy to clip with wire cutters and form to whichever shape you require.

Wire trunking Mini B30-I

Wire trunking Mini B30-U

Wire trunking Mini B30-U

Art. no.: 1149125

The step has good torsional stiffness but is nonetheless easy to form according to your need.
Is used for example for a quantity of signal cables of air hoses.

Cable ladder type KHZ, Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZ, Hot-dipped galvanised FZV, L=6 meter

Art. no.: 1120120

Hot-dip galvanised cable ladder with hexagonal side profiles and oval- pressed rungs. The ladders are intended for installations in environments where high requirements are set for strength and torsional rigidity. Can not be used to step or climb upon. Application areas are: Chemical heavy industry, coastal areas, swimming pools, shipyards, etc.

Cable ladder type KHZ, Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZ, Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZ, Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZ, Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZ, Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZP Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZP Hot-dipped galvanised FZV, L=6 meter

Art. no.: 1120220

Hot-dip galvanised cable ladder with closed, hexagonal side profiles and flat, perforated rungs.
The ladders are intended for installations in environments where high requirements are set for strength and torsional rigidity.

Cable ladder type KHZP Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZP Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZP Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZP Hot-dipped galvanised FZV, L=6 meter

Cable ladder type KHZP Hot-dipped galvanised FZV, L=6 meter

Mounting rail WMS 15 & 25

Mounting rail WMS 15 & 25

Art. no.: 1120309E

For mounting of cable with binding wire, cable tie, etc, mounted directly on wall.

Mounting rail WMS 15 & 25

Safety switch EMC plastic 3-pole OTE 16-90 A

Safety switch EMC plastic 3-pole OTE 16-90 A

Art. no.: 3140410

Standards SS4280605 and IEC947-3.
Cable entries M threaded knock-out openings. All switches are extensible with a fourth pole.
Enclosure IP65, IP20 when the lid is open.
Suitable for 4- and 5-conductor system.
Safety switch plate supplied as well by default.
Shielded cables are selected according to the static frequency changer manufacturer’s recommendations.

Safety switch EMC plastic 3-pole OTE 16-90 A

Safety switch EMC plastic 3-pole OTE 16-90 A

Safety switch EMC plastic 3-pole OTE 16-90 A

Safety switch EMC plastic 3-pole OTE 16-90 A

Wire trunking Hot-dip galvanised, Wibe/Defem

Wire trunking Hot-dip galvanised, Wibe/Defem

Art. no.: 1149200

The wire trunking system is strong and flexible, it is quick and easy to mount. Wire trunking comes in eight different widths 53, 75, 120, 220, 320, 422, 522 and 622 mm.

Connection cable halogen-free solar cell panel cable, Nexans

Connection cable halogen-free solar cell panel cable, Nexans

Art. no.: 0505300

ENERGYFLEX® is a halogen-free cable that is used in permanent installations for solar panels on house roofs or in solar farms. It can also be used to connect power inverters/inverters. Designed for permanent indoor and outdoor installations. The cable is resistant to extreme temperatures (-40°C till +120°C), ozone and UV. The cable complies with fire propagation regulations in accordance withIEC 60332-1(F2).
Two versions: black jacket and black jacket with red stripe.

Connection cable halogen-free solar cell panel cable, Nexans

Load disconnector DC OTDCP

Load disconnector DC OTDCP

Art. no.: 3134003

OTDCP from 16 to 32 A (IEC 60947) can be used in DC circuits up to 1000 V DC. Up to two circuits can be separated with a single unit.
High performance and energy efficient
Compact design saves space
Prevents electrical accidents
Long service life and high enclosure class IP 65

Load disconnector DC OTDCP

Load disconnector DC OTDCP

Load disconnector DC OTDCP

Load disconnector DC OTDCP

Quick contact for solar panels. Hane 4-6mm²

Quick contact for solar panels. Hane 4-6mm²

Art. no.: 1273501

Male connector PV-stick + with Push-In connection, for solar panels. You do not need crimping connectors and crimping tools and avoid mounting errors. This saves up to 50% time during installation - without affecting the quality. The new photovoltaic connections are approved by TÜV (German Technical Inspection Association) and comply with DIN EN 50521.

Quick contact for solar panels. Hona 4-6mm²

Quick contact for solar panels. Hona 4-6mm²

Art. no.: 1273502

Female socket PV-stick + with Push-In connection, for solar panels. You do not need crimping connectors and crimping tools and avoid mounting errors. This saves up to 50% time during installation - without affecting the quality. The new photovoltaic connections are approved by TÜV (German Technical Inspection Association) and comply with DIN EN 50521.

Plastic-encased safety switch SBG 3-pole 32-200 A

Plastic-encased safety switch SBG 3-pole 32-200 A

Art. no.: 3134179

Enclosure of insulating, impact-resistant and corrosion-resistant material.
Tested according to SS 428 06 05 and EN60947-3, CE marked and SEMKO certified.
Safety switches 16A have a lockable side handle while switches 25 to 125A are front operated with locking capabilities.
All switches excluding SBG 316 and SBG 416G are equipped with an auxiliary contact.
All switches have break-out holes for cable entry upwards and downwards and are supplied with sealing nipples for IP65.

Plastic-encased safety switch SBG 3-pole 32-200 A

Plastic-encased safety switch SBG 3-pole 32-200 A

Plastic-encased safety switch SBG 3-pole 32-200 A

Plastic-encased safety switch SBG 3-pole 32-200 A

Connecting cable for solar panels PV1-F, Rutab

Connecting cable for solar panels PV1-F, Rutab

Art. no.: 0377500

Double-insulated, halogen-free, UV- and weather-resistant cable in durable design. The cable is specially designed for installation in solar panel installations and approved by TÜV with an expected lifespan of 25 years when laid directly in sunlight. The cable is approved for ground installation.

Connecting cable for solar panels PV1-F, Rutab

Connecting cable for solar panels PV1-F, Rutab

Connecting cable for solar panels PV1-F, Rutab

Connecting cable for solar panels PV1-F, Rutab

Connecting cable for solar panels PV1-F, Rutab

Load disconnector DC

Load disconnector DC

Art. no.: 3134666

DC load disconnector for solar cell installations. The switch is intended to be installed before the inverter. Knob with clear position indication that is lockable in the off position. Cable penetration takes place through one of the four knockouts located on the enclosure above the respective underside, max. Screw connection M25.

Load disconnector DC

Solar connectors Male / Female

Solar connectors Male / Female

Art. no.: 5287578

Electrical contacts for connection of solar cell installations.

Solar connectors Male / Female

Solar connectors Male / Female

Solar connectors Male / Female

Solar connectors Male / Female

Mounting key MC4, Plastic / Metal

Mounting key MC4, Plastic / Metal

Art. no.: 5287586

The mounting kit consists of two mounting keys for mounting and dismounting the cable gland and for opening the locking device.

Mounting key MC4, Plastic / Metal

Press rod for Elkontakt MC4

Press rod for Elkontakt MC4

Art. no.: 5287588

Press bar for contact pressing of solar cell contact mc4. Complete with press jaws for cable area 2.5 / 4/6 mm². Also equipped with locator for positioning the MC4 connector.

Solar cell tester HT Solar I-Ve

Solar cell tester HT Solar I-Ve

Art. no.: 4202125

HT Solar I-Ve from HT Italy, is a complete solar system analyzer that can measure the efficiency of 1 string / MPPT and a phase AC. With accessories MPP 300 and extra power take-off up to 3 DC strings / MPPT and 3 phase AC. HT Solar I-Ve can also measure and display IV curves as well as, for example, maximum power point (MPP) for a solar system. Now all the way to 1500V plants. Mount HT Solar I-Ve with MPP300 adapter, found under accessories below. clamps and measuring up to three DC voltages, three DC currents, and three phases AC power and 3-phase + neutral AC, for complete and simultaneous analysis of even large plants, With 1500V voltage measurement and current plugs up to 1000A, no system is too large .

With HT Solar I-Ve you can measure and calculate the sun's efficiency, as well as the efficiency of the DC / AC inverter. The efficiency is used to control and optimize the solar installation and give a picture of the system's efficiency. The measurement can be used for verification during commissioning and together the position intended / software simulated efficiency, annual service and troubleshooting and calculating the actual expected repayment time after commissioning of the plant. The supplied remote control is used to synchronize data from the supplied reference cell as well as ambient and cell temperature. The remote unit is synchronized with unique HT Solar I-Ve, so that one is independent of the heights and obstructions between the measurement point of the electrical values, typically at the inverter, and the values of radiation and temperatures, typically through the panels.

HT Solar I-Ve has in addition to USB connection to PC, WiFi so that data can be transmitted wirelessly to PC or free Android / IOS app. Applied HT analysis App on phone and tablet can be transferred data directly to free storage in HT Cloud or attached to an email and sent home to the office. This means that the measurements, which are once completed in the field, can be opened on the computer in the office without the instruments coming home and "emptied". It saves time. HT Solar I-Ve meets IEC 61010-1 CAT II 1000V DC, CAT III 300V to ground 1500V between the inputs, and comes complete in heavy suitcase with instruction manual CD and quick guide, HT4005k 0 ... 200A AC power clamp, HT4004 0th. .10 ... 100A AC / DC current clamp, HT304N reference cell M304 Gradient meter, Solar02 remote unit synchronization, PT300N ambient and cell temperature sensor, measuring cables, crocodile clamps, MC3 and MC4 to the track adapters

Showing 52 of 157