Order lines: 0

Ahlsell Products VentilationGrilles, cover plates, and wire mesh

Grilles, cover plates, and wire mesh

Outer wall grille

Make sure you have good ventilation products! Ahlsell's ventilation range spans duct systems, devices, valves, indoor grills, hoses with accessories, roof hoods, exterior wall grills, ventilation accessories, filters, mounting materials, fans, aggregates, cooker hoods, controls, regulations, fire gas dampers, and flat strip plates.

Grilles 150x150 with adapter, Fresh

Grilles 150x150 with adapter, Fresh

Art. no.: 9302637

Grilles for use on the outside wall, equipped with concealed screw holes for screw mounting. The screw holes’ hole picture fits the Cover plate # 165 and # 210. Equipped with a ring that fits directly to module pipe Ø95/99 x 150 and to Ø98/102 with rubber ring EPDM (art. No. 008247). Can be equipped with insect grid 140. Made of UV-resistant construction plastic in different colours.
Colour: White, NCS S0502-Y
Free area: 64cm2

Grilles 150x150 with adapter, Fresh

Grilles 150x150 with adapter, Fresh

Grilles 150x150 with adapter, Fresh

Wire grid with nipple dimensions NG, ETS

Wire grid with nipple dimensions NG, ETS

Art. no.: 19056409

Aluminum foil

Art. no.: 420400

The smaller dimensions can be installed at the eaves. Otherwise, the screen works perfectly to keep insects, rats, and other rodents outside. Also has other uses. The wire diameter is 0.25 mm and hole size is 1.3X1.1 mm for all aluminium screens.

Valve grille ABC-GP, ABC Vent

Valve grille ABC-GP, ABC Vent

Art. no.: 19059572

Flat louvre grille developed for use as the exhaust air or ambient atmosphere device at natural ventilation

Valve grille ABC-GP, ABC Vent

Valve grille ABC-GP, ABC Vent

Valve grille ABC-GP, ABC Vent

Valve grille ABC-GP, ABC Vent

Outer wall grille YGAV, REC Indovent

Outer wall grille YGAV, REC Indovent

Art. no.: 19050521

YGAV is primarily intended for fresh air intake screens. YGAV is made of aluminium and has a circular connector to fit the ducting directly. The screen is supplied with small animal safety netting.

Cover plate ABC-TP, ABC Vent

Cover plate ABC-TP, ABC Vent

Art. no.: 19050526

Made of 0.7 hot-dip galvanized steel plate corrosion class C2. Is equipped with fixing holes in the corners.

Cover plate ABC-TP, ABC Vent

Cover plate ABC-TP, ABC Vent

Punched grids ABC-TRNF, ABC Vent

Punched grids ABC-TRNF, ABC Vent

Art. no.: 6530541

ABC-TRNF is a stamped net grille with flange with nipple measurement in spiro standard. Made of hot-dip galvanised steel plate with net grille mesh width12 mm.

Mesh Welded

Art. no.: 195903

For plastering reinforcement, as well as countless areas of application within the ventilation industry.

Wire Grid with socket dimensions ABC-TRM, ABC Vent

Wire Grid with socket dimensions ABC-TRM, ABC Vent

Art. no.: 6530454

Used as protective grille at the open ends of the channel, ventilation openings and as contact protection regarding, for example, fans and dampers.
Made of hot-dip galvanised steel plate and the small animals-proof wire mesh grilles/ stamped net grilles. 12 mm mesh size for corrosion class C2.

Outer wall grille ABC-YG/GL, ABC Vent

Outer wall grille ABC-YG/GL, ABC Vent

Art. no.: 6530251

Exhaust air grilles for ambient atmosphere/exhaust air at protected and normally exposed positions. Very good water degree of separation, at least 99% according to the Eurovent 2/5 air speed of up to 2 m/s of the free area of the grille. Mounting frame with a removable grille inset and small animals-proof wire mesh.
Accessories:
• Fixing bracket for brick lining
• Insect net.
• Over plate.
• Hinges
• Electrical defrosting.

Outer wall grille ABC-YG/GL, ABC Vent

Jalousie Shutter ABC-JSR, ABC Vent

Jalousie Shutter ABC-JSR, ABC Vent

Art. no.: 19059649

Normally used as back valve or as the end of the rectangular channels. The shutters are self-closing through their own weight.
Manufactured with an aluminium finish frame in which the aluminium shutters are mounted.

Jalousie Shutter ABC-JSR, ABC Vent

Valve grille ABC-GC, ABC Vent

Valve grille ABC-GC, ABC Vent

Art. no.: 19050369

Louvre grille with a circular connector adapted to spiro tube standard developed for use as exhaust air or ambient atmosphere device for natural ventilation. ABC-GC is manufactured in ABC GUARANTEE PLATE with 15 years paint coating guarantee for environmental class M3.
It is equipped with a circular nipple coupling made of hot-dip galvanised steel with a type approved rubber seal ring, as well as with insect-proof plastic net.

Valve grille ABC-GC, ABC Vent

Valve grille ABC-GC, ABC Vent

Valve grille ABC-GC, ABC Vent

Wire Grid with nipple dimensions ABC-TRN, ABC Vent

Wire Grid with nipple dimensions ABC-TRN, ABC Vent

Art. no.: 6530300

Used as protective wire grid at the open ends of the channel, ventilation openings and as contact protection regarding, for example, fans and dampers.
Made of hot-dip galvanised steel plate and the small animals-proof wire mesh grid/ stamped net grilles. 12 mm mesh size for corrosion class C2.

Outer wall grille ABC-YG, ABC Vent

Outer wall grille ABC-YG, ABC Vent

Art. no.: 19055160

Exhaust air grilles for ambient atmosphere/exhaust air at protected and normally exposed positions. Very good water degree of separation, at least 99% according to the Eurovent 2/5 air speed of up to 2 m/s of the free area of the grille. Mounting frame with a removable grille inset and small animals-proof wire mesh.
Accessories:
• Fixing bracket for brick lining
• Insect net.
• Over plate.
• Hinges
• Electrical defrosting.

Outer wall grille ABC-YG, ABC Vent

Outer wall grille ABC-YG, ABC Vent

Outer wall grille ABC-YG, ABC Vent

Outer wall grille ABC-YGAL, ABC Vent

Outer wall grille ABC-YGAL, ABC Vent

Art. no.: 6530270

Circular external wall grille for wind-protected position was developed for use as the exhaust air or ambient atmosphere for mechanical or natural ventilation.
ABC-YG/AL has been designed for high impact resistance and may well be placed in the façade close to the pavement and public spaces.
Is manufactured in cast aluminium for environmental class M3 with a small animals-proof metal mesh, or insect-proof plastic net.

Wire Grid with nipple dimensions ABC-TRN, ABC Vent

Wire Grid with nipple dimensions ABC-TRN, ABC Vent

Art. no.: 19050530

Used as protective wire grid at the open ends of the channel, ventilation openings and as contact protection regarding, for example, fans and dampers.
Made of hot-dip galvanised steel plate and the small animals-proof wire mesh grid/ stamped net grilles. 12 mm mesh size for corrosion class C2.

Jalousie Shutter ABC-JSOF with Cover Flange, ABC Vent

Jalousie Shutter ABC-JSOF with Cover Flange, ABC Vent

Art. no.: 19059695

Is generally used at the end of circular channels to prevent flame blow-back as fan engine is turned off. The shutters are self-closing through their own weight.
ABC-JSO is manufactured with an aluminium finish frame in which the aluminium shutters are mounted.
ABC-JSOF is also equipped with a cover flanges for a beautiful end result. Made to corrosion class C4 and have, in addition, a replaceable insert.

Jalousie Shutter ABC-JSOF with Cover Flange, ABC Vent

Jalousie Shutter ABC-JSOF with Cover Flange, ABC Vent

Jalousie Shutter ABC-JSOF with Cover Flange, ABC Vent

Jalousie Shutter ABC-JSOF with Cover Flange, ABC Vent

Jalousie Shutter ABC-JSOF with Cover Flange, ABC Vent

Grilles 150x150, Fresh

Grilles 150x150, Fresh

Art. no.: 9302632

Grilles for use on the outside wall, equipped with concealed screw holes for screw mounting. The screw holes’ hole picture fits the Cover plate # 165 and # 210. Equipped with a ring that fits directly to module pipe Ø95/99 x 150 and to Ø98/102 with rubber ring EPDM (art. No. 008247). Can be equipped with insect grid 140. Made of UV-resistant construction plastic in different colours.
Colour: White, NCS S0502-Y
Free area: 64cm2

Grilles 150x150, Fresh

Grilles 150x150, Fresh

Grilles 150x150, Fresh

Jalousie Shutter VK, Östberg

Jalousie Shutter VK, Östberg

Art. no.: 6730425

Self-closing jalousie shutter VK made of UV-resistant art material. Has low flow-resistance. Some examples are, 10 Pa at 4 m/s air velocity, 30 Pa at 6.5 m/s and 50 Pa at 8.5 m/s.

Grilles Pisla MVM, white metal with mesh

Grilles Pisla MVM, white metal with mesh

Art. no.: 6515402

Grilles Pisla 241, white plastic

Grilles Pisla 241, white plastic

Art. no.: 6518966

White plastic grille with mesh.

Valve Grid, Fresh

Valve Grid, Fresh

Art. no.: 248432

Valve grille Fresh

Valve grille Fresh

Art. no.: 302649

Ventilation grate made of aluminium.

Excess air grille F12, Fresh

Excess air grille F12, Fresh

Art. no.: 302987

Flow-through valve made of plastic. Made up of 2 flat grates. Capacity at 10 Pa column: 9.5 l/s. Capacity at 10 Pa hole row 7.5 l/s. Piercing column: 330x16 mm. Piercing row: 16 units Ø16 mm.

Flap valve 102

Art. no.: 6621506

Square flap valve made of aluminium. Inner dimensions 150x150 mm.

Flap valve 401

Art. no.: 303113

Square flap valve made of plastic.

New in the online store

Grid for ventilation holes in the brick façade

Grid for ventilation holes in the brick façade

Art. no.: 192119

Specially shaped net, which bends easily for joints of various heights and widths. Can be pressed in e.g. with the tip of a yardstick. Non-oxidising. For a brick front. Effective seals out mice in the ventilation holes.

Ventilation Net

Ventilation Net

Art. no.: 109851

Plastic-coated fibre-glass mesh intended for insect barrier in ventilation openings in eaves, windows and other ventilation devices. The fibre-glass makes the mesh resistant to linear strain. Age-resilient. Type Mika wire mesh

Ventilation Net

Ventilation Net

Art. no.: 109850

Insect net of polyethylene intended for insect barrier in ventilation openings in eaves, windows and other ventilation devices. Mask size 1.6 mm.

Eaves Netting

Art. no.: 302685

Copper net. Suitable as insect barrier in ventilation openings in eaves. Supplied in 10-metre rolls.

Outer wall grille

Outer wall grille

Art. no.: 9302304

The outer wall grille is fitted on the house facade and fits PAX fans, vents and wall pipes/spiro with Ø 100 mm connection. Recommended wall hole-cutting measurement is Ø 110 mm. To be completed with PAX wind breaker hood when the grille is installed in windy environments.

Blinds damper for PAX Viaduct

Blinds damper for PAX Viaduct

Art. no.: 9302434

Outer wall grille with shutter function that prevents air flow in the opposite direction when the fan is off. Suitable in connection to Ø 100 mm duct.

Inner wall grille

Inner wall grille

Art. no.: 9302448

Interior grille for discrete installation of exhaust air outlet. White or chrome.

Outer wall grille, a-collection

Outer wall grille, a-collection

Art. no.: 6430233

With round connection. For use as an intake or exhaust grille. Made of cast aluminium. Fixes to the wall by casting or nailing into constructions. The screen is supplied with small animal safety netting.

Metal grille with adapter, Fresh

Metal grille with adapter, Fresh

Art. no.: 6621565

Circular outer wall grille made from pressed sheet metal with adapter. The adapter is adapted for circular duct dimensions and has external mouldings for safe installation.

Valve grille made of sheet metal

Valve grille made of sheet metal

Art. no.: 6630245

Smooth grille with glued mesh made from glass fibre-reinforced nylon. Made from 0.7mm sheet metal

Refrigerator grille, Fresh

Refrigerator grille, Fresh

Art. no.: 19036120

Standard refrigerator grilles with timeless design. Used in connection with refrigerator and freezer installation. Ventilates excess heat. Adjustable in width and height.
Material: Plastic.

Outer Wall Grille, Klimatfabriken

Outer Wall Grille, Klimatfabriken

Art. no.: 9302763

Square external wall grille 150x150 equipped with countersunk screw holes. Material with low environmental impact (PP).

Outer Wall Grille, Klimatfabriken

Outer Wall Grille, Klimatfabriken

Metal grille with adapter, Fresh

Metal grille with adapter, Fresh

Art. no.: 66121530

Circular outer wall grille made from pressed sheet metal with adapter. The adapter is adapted for circular duct dimensions and has external mouldings for safe installation.

Outer Wall Grille Stainless Steel, Klimatfabriken

Outer Wall Grille Stainless Steel, Klimatfabriken

Art. no.: 9302580

Exterior wall grille made of stainless steel. Mounted on the facade and fits duct/spiral Ø100 mm. Fastening clamps on the socket facilitate installation. The grille has two countersunk screw holes for screw mounting. Equipped with insect net and sealing strip. Remove the insect net when used together with a bathroom fan (exhaust). Recommended hole size Ø110 mm.

External grille, Fresh

External grille, Fresh

Art. no.: 6611221

Grilles for use on the outside wall, equipped with concealed screw holes for screw mounting. The screw holes’ hole picture fits the Cover plate # 165 and # 210. Equipped with a ring that fits directly to module pipe Ø95/99 x 150 and to Ø98/102 with rubber ring EPDM (art. No. 008247). Can be equipped with insect grid 140. Made of UV-resistant construction plastic in different colours.
Colour: White, NCS S0502-Y
Free area: 64cm2

Cabinet grille, Fresh

Cabinet grille, Fresh

Art. no.: 19055904

Grilles for use on the outside wall, equipped with concealed screw holes for screw mounting. The screw holes’ hole picture fits the Cover plate # 165 and # 210. Equipped with a ring that fits directly to module pipe Ø95/99 x 150 and to Ø98/102 with rubber ring EPDM (art. No. 008247). Can be equipped with insect grid 140. Made of UV-resistant construction plastic in different colours.
Colour: White, NCS S0502-Y
Free area: 64cm2

Jalousie Shutter VK, Östberg

Jalousie Shutter VK, Östberg

Art. no.: 6730428

Self-closing jalousie shutter VK made of UV-resistant art material. Has low flow-resistance. Some examples are, 10 Pa at 4 m/s air velocity, 30 Pa at 6.5 m/s and 50 Pa at 8.5 m/s.

Showing 43 of 43