Ahlsell
Order lines: 0
Quick order
AhlsellProductsElectricHeating products 85-8987 Electric fan heaters, Curtain and ceiling fans, Air cleaners

87 Electric fan heaters, Curtain and ceiling fans, Air cleaners

Do you work with the installation of heating products such as radiators and heating cables? We at Ahlsell help you find heating products for your assignment. Regardless of whether you work with fixed installation 400V or plug 230V, we have the range. Electrical installations must be carried out by professionals. Here you will find oil-filled radiators, frost protection, mini elements, heating cable, and accessories for easy installation. Smart products from several major suppliers. With your professional know-how in the installation of heating products and good products, the job will be done safely. Explore our wide range of heating products and accessories here in the online store or visit your nearest Ahlsell store.

Air decontamination unit (Ozone) WOZ500 - for hotels, cars, environmental rooms
Airmaster
Air decontamination unit (Ozone) WOZ500 - for hotels, cars, environmental rooms
Art. no.: 8749012
Airmaster WOZ500 quickly eliminates odors from moisture, mold, smoke, drains and pets. Extra accessories Hose nipple, silicone hose. Design Stainless steel, blue lacquer.

Area of ​​use
Airmaster is portable and is used for smoke and odor removal in homes, kitchens, hotel rooms, hygiene areas, boats and cars. Airmaster is easily mounted on the wall for fixed installation for permanent odor removal in recycling rooms, hygiene rooms, ventilation systems and for water purification.

How ozone units work Ozone is a special form of oxygen so-called active oxygen and is produced in the machine by electrical discharge. Ozone acts by oxidizing organic substances, bacteria, microorganisms and viruses. Nicotine, smoke, mold and other odors are eliminated. The end products of the oxidation are in most cases only carbon dioxide and water, thus Airmaster is environmentally friendly.

Digital control with timer The machine can be easily set up via the digital display.
The amount of ozone / effect can be varied between 0-100%. Timer modes: Day timer - Interval timer - Shutdown timer
Extra accessories, hose nipple and silicone hose To direct the ozone to a separate space to be treated, e.g. ventilation, partitions, cars, garbage rooms or water purification.

Operation / Maintenance
The ceramic tube that generates the ozone should be replaced once a year.
The pre-filter that protects the machine is replaced if necessary.
Air curtain for entryways, with remote control and built-in regulator, PA2200C
Frico
Air curtain for entryways, with remote control and built-in regulator, PA2200C
Art. no.: 8750504
PA2200C is a compact air curtain intended for smaller entry doors. The air curtain has built-in control and can also be adjusted with a remote control, making it very simple to use. PA2200C creates a temperature-separating air barrier that effectively prevents draughts and provides good heated comfort inside the door. With its timeless design, PA2200C is suitable for all entryways. The air curtain has an operating panel built into the gable, making cabling unnecessary. The front may be relacquered in a color of your choosing for perfect adaptation to the surroundings.

• Recommended installation height 2,2 m*
• Horizontal mounting
• Electric heating: 3–16 kW
• Optimized air flow, thanks to the Thermozone technology.

Product facts:
• Remote control and built-in control.
• 3 fan settings and 2 electric heat settings.
• Unit with 3 kW comes with 1.5 m cord and plug.
• Wall brackets included.
• The front is easy to remove, easing installation and maintenance work.
• Corrosion-resistant casing made from heat-galvanized and powder-coated sheet steel. Color front: white, RAL 9016, NCS S 0500-N. Color grill, backplate, ends and consoles: gray, RAL 7046.

Regulation:
• Remote control.
• Built-in control panel on the surface end - 3 fan settings, 2 electrical heat settings
• Manual fan setting.
• Automatic heat regulation.
Air curtain for entryways, with remote control and built-in regulator, PA2200C
Hot air fan stationary, Cat -series
Frico
Hot air fan stationary, Cat -series
Art. no.: 8710001
Panther is a series of very silent and efficient fan heaters for stationary use. For heating, drying and ventilation of e.g. workshops, sorts halls, shops, gathering venues and drying rooms. Panther is equipped with a 5 - 35ºC thermostat.
The desired output/speed can be set in the control panel, available as an accessory. Several devices can be controlled from the same operation panel.
The motor is a 1-phase model, with ball bearings and equipped with a thermal contact. Panther 6-15 kW has an alarm outlet with the possibility to connect to DUC. Resettable overheat protection. Corrosion-protected housing made of white-lacquered sheet steel. The fan can be mounted on a flexible wall bracket, which enables directing the air stream downwards and to the sides.
Output stage: 0-1/2-1, noise level 39-47 db(A).
Connection voltage: 6-15 kW: 400V/3, SE135: 440V/3 or 500V/3
Housing: splash-proof design IP44. Approved by SEMKO and CE marked.
Hot air fan stationary, Cat -seriesHot air fan stationary, Cat -seriesHot air fan stationary, Cat -series
Heat fan VF3 with cord and plug 400V
El-Björn
Heat fan VF3 with cord and plug 400V
Art. no.: 8726312
Robust construction in corrosion-resistant galvanized steel sheet, can easily be hung on the wall with the supplied bracket
Powerful fan motor with low noise level
The elements are designed for optimum air flow and rapid heating
The control grid at the front holds the airflow together and gives a long throw
Intended for both temporary and permanent heating, IP 44 allows it to withstand humid spaces
Stepless thermostat 5 ° - 35 °, controls heat and fan or just heat only. Selected with rocker switch on control panel
Supplied with 2m cable with CEE plug 16A / 400V
The overheating protection is reset manually on the control panel, the fan is equipped with a post-cooling thermostat
Does not load N (zero)
Mechanical thermostat for room temperature control

Incoming 5-pole / 400V 16A CEE 416-6 1 pcs
Incoming Cable Length / Cable Area / Connection 2.0m / 4G1.5 / 416P6 CEE
Heat fan VF 15 with cable and plug / timer, 400V
El-Björn
Heat fan VF 15 with cable and plug / timer, 400V
Art. no.: 8726352
Robust construction in corrosion-resistant galvanized steel sheet, can easily be hung on the wall with the supplied bracket
Powerful fan motor with low noise level
The elements are designed for optimum air flow and rapid heating
The control grid at the front holds the airflow together and gives a long throw
Intended for both temporary and permanent heating, IP 44 allows it to withstand humid spaces
Stepless thermostat 5 ° - 35 °, controls heat and fan or just heat only. Selected with rocker switch on control panel
Supplied with 2m cable with CEE plug 32A / 400V
The overheating protection is reset manually on the control panel, the fan is equipped with a post-cooling thermostat
Does not load N (zero)
Mechanical thermostat for room temperature control

Incoming 5-pole / 400V 32A CEE 432-6 1 pcs
Incoming Cable Length / Cable Area / Connection 2.0m / 4G6 / 432P6 CEE
Heating fan VFBR 9 - for flammable spaces
El-Björn
Heating fan VFBR 9 - for flammable spaces
Art. no.: 8726366
Robust construction in corrosion-resistant galvanized steel sheet, can easily be hung on the wall with the supplied bracket
Powerful fan motor with low noise level
The elements are designed for optimum air flow and rapid heating
The fan design gives a long throwing length of the air stream
Intended for both temporary and permanent heating, IP 55 allows it to be used in flammable spaces eg. woodworking premises, barns
Stepless thermostat 5 ° - 35 °
Supplied with 2m cable with CEE plug 16A / 400V
The overheating protection is reset manually on the control panel
Does not load N (zero)
Equipped with zero voltage release
Mechanical thermostat for room temperature control

Incoming 5-pole / 400V 16A CEE 416-6 1 pcs
Incoming Cable Length / Cable Area / Connection 2.0m / 4G2.5 / 416P6 CEE
Heat fan VF 6
El-Björn
Heat fan VF 6
Art. no.: 8726322
Robust construction in corrosion-resistant galvanized steel sheet, can easily be hung on the wall with the supplied bracket
Powerful fan motor with low noise level
The elements are designed for optimum air flow and rapid heating
The control grid at the front holds the airflow together and gives a long throw
Intended for both temporary and permanent heating, IP 44 allows it to withstand humid spaces
Stepless thermostat 5 ° - 35 °, controls heat and fan or just heat only. Selected with rocker switch on control panel
Supplied with 2m cable with CEE plug 16A / 400V
The overheating protection is reset manually on the control panel, the fan is equipped with a post-cooling thermostat
Does not load N (zero)
Mechanical thermostat for room temperature control

Incoming 5-pole / 400V 16A CEE 416-6 1 pcs
Incoming Cable Length / Cable Area / Connection 2.0m / 4G1.5 / 416P6 CEE
Heat fan VF 9
El-Björn
Heat fan VF 9
Art. no.: 8726332
Robust construction in corrosion-resistant galvanized steel sheet, can easily be hung on the wall with the supplied bracket
Powerful fan motor with low noise level
The elements are designed for optimum air flow and rapid heating
The control grid at the front holds the airflow together and gives a long throw
Intended for both temporary and permanent heating, IP 44 allows it to withstand humid spaces
Stepless thermostat 5 ° - 35 °, controls heat and fan or just heat only. Selected with rocker switch on control panel
Supplied with 2m cable with CEE plug 16A / 400V
The overheating protection is reset manually on the control panel, the fan is equipped with a post-cooling thermostat
Does not load N (zero)
Mechanical thermostat for room temperature control

Incoming 5-pole / 400V 16A CEE 416-6 1 pcs
Incoming Cable Length / Cable Area / Connection 2.0m / 4G2.5 / 416P6 CEE
Dehumidifier AD 200S
El-Björn
Dehumidifier AD 200S
Art. no.: 8742029
Condensation dehumidifiers have a strong and robust casing and are ideal for drying in the very tough construction and rental industry, and even after water damage. Condensing technology
creates an even dehumidification where the condensation water flows into the tub. The S version is equipped with a main switch and an alarm lamp that lights if the tub is full. The E-version is equipped with a built-in hygrostat and settings for the machine are made via a display. The machines are equipped with a conveyor belt which facilitates movement.

Suitable for spaces between 200m³-680m³.

Condensation dehumidification is used in enclosed spaces where the intention is to lower the moisture level in the air, this in order for the material in the environment to release moisture, so that equilibrium is created. This is a
process that can take a long time depending on the humidity and temperature of the enclosed space. The process is very positively affected by higher temperature in the room. A big advantage
with condensation dehumidification is its energy efficiency when you get back some of the energy supplied through the condenser heat from the cooling circuit. Hose connection 12mm.

• Chassis protected by the conveyor belt
• Rotary compressor for increased efficiency
• Fan with continuous operation
• Condenser and evaporator made of copper tubes with aluminum slats
• Filters to protect the condenser and ensure the dehumidification process
• Hot gas defrosting is performed continuously during freezing
• Stackable, up to 4 machines
• Large collection vessel (7l) with overfill protection
• Love can be connected to hose for drainage to drain
Heating fan with cord and plug
El-Björn
Heating fan with cord and plug
Art. no.: 8726300E
Durable hot air fan in powder-coated galvanized sheet steel. Equipped with a unique grid that increases the throw length. Can be mounted on a wall with included suspension bracket. Supplied with 2 meter cable and plug. The main area of use is warehouses, workshops, storage and similar spaces. Stepless thermostat 5 ° C - 35 ° C, controls heat and fan When the temperature is reached, the fan is switched off to save energy Overheating protection is restored by pulling out the plug This product is only suitable for well-insulated spaces or occasional use.

Corrosion-resistant galvanized sheet steel
Powerful fan motor with low noise level
Unique break that increases the throw length
Intended for both temporary and permanent heating
Overheating protection
Mechanical thermostat for room temperature control
Heating fan with cord and plug
Showing 29 of 29