Order lines: 0

Ahlsell Products Consumables Chemical technology and hygienePaint - varnish - solvent

Paint - varnish - solvent

Paints and varnishes

Leak detectors and crack indication

Brinealcohol and glycol

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Propylene Glycol EarthCare Conc m Corrosion Inhibitor

Propylene Glycol EarthCare Conc m Corrosion Inhibitor

Art. no.: 471375

EarthCare Monopropylene glycol is formulated on a recycled glycol, which means an environmental advantage in the form of reduction of CO 2 emissions compared to a product that is not based on recycled raw material (calculated by RISE). It is available as a concentrate to ready-mixed 30%. Assessed by both Byggvarubedömningen and Sunda Hus. EarthCare Monopropylene Glycol is compatible with most metals except zinc. The hot heat transfer fluid can dissolve zinc and should therefore not be used in galvanized pipelines. EarthCare Monopropylene Glycol has a wide range of uses and provides long-lasting protection with high performance. Added corrosion inhibitor is nitrite, amine, phosphate, borax and silicate free which makes it gentle on pipelines and pumps. EarthCare Monopropylene glycol is an uncoloured product, as paint additives are not environmentally friendly. This product is designed to be used for all real estate and process applications. Air conditioning (HVAC), cooling and heat recovery systems, geothermal and rock heating, sprinkler systems and solar panels, but can also be used in secondary cooling systems for leisure facilities such as ice rinks and solar panels. Monopropylene glycol is low toxic, which makes it suitable for use in the food industry in the above-mentioned plants. Used glycol, regardless of make, can be handed over to Recyctec at handling cost to enable continued reuse. Contact order@recyctec.se or 010-209 00 28. See symbol for product sheet for more detailed product information.

Crack indicator crc crick

Crack indicator crc crick

Art. no.: 253667

Crack-seeking liquid for checking cracks and holes in cast-iron and welded parts and shows material fatigue. Indicates cracks of 20µ. non-destructive testing, aerosol. Hazard labelling: 30205 = extremely flammable. 7080 = extremely flammable, irritant, environmentally hazardous. 20790 = extremely flammable, irritant, environmentally hazardous.

Crack indicator crc crick

Crack indicator crc crick

Acetone nitor

Art. no.: 292653

Solvent Acetone. Dissolves grease, oil and resin. For cleaning and stain removal. Highly flammable. Density 0.79. Recommended gloves: nitrile rubber, PVC, 4H. Hazard labelling: highly flammable, irritating.

Isopropanol - Frost protection and Detergent Prols

Isopropanol - Frost protection and Detergent Prols

Art. no.: 72823109

Isopropanol 99% is for cleaning fibre optic contact surfaces. Used together with a lint free dry wipe for welding or other types of termination – for removal of excess grease or remains after stripping.

Ethylene Glycol Earthcare 30% with Corrosion Inhibitor

Ethylene Glycol Earthcare 30% with Corrosion Inhibitor

Art. no.: 471184

EarthCare Monoethylene glycol is formulated on a recycled glycol, which means an environmental advantage in the form of reduction of CO 2 emissions compared to a product that is not based on recycled raw material (calculated by RISE). It is available as a concentrate to ready-mixed 30%. Assessed by both Byggvarubedömningen and Sunda Hus. EarthCare Monoethylene glycol has a wide range of uses that provide long-term protection, reduced viscosity, increased heat capacity and thermal conductivity below the freezing point. Added corrosion inhibitor is nitrite, amine, phosphate, borax and silicate free which makes it gentle on pumps and compatible with most metals in pipelines. EarthCare Monoethylene glycol is an uncoloured product, as paint additives are not environmentally friendly. This product is designed to be used for all real estate and process applications. Closed cooling and heat recovery systems and industrial process cooling. Used product regardless of make, can be handed over to Recyctec at handling cost to enable continued reuse. Contact order@recyctec.se or 010-209 00 28. See symbol for product sheet for more detailed product information.

Touch Up paint pen Sunchem

Touch Up paint pen Sunchem

Art. no.: 19050843

Coatings primer grey

Coatings primer grey

Art. no.: 109689

Used to achieve corrosion protection and good adhesability. The base paint is used on vehicle chassis, welding joins and all kinds of steel and iron surfaces. Provides a sustainable surface for most paints. Completely dry after 12 hours, repaintable after 30 minutes. Withstands temperatures of up to 80°. Hazard labelling: Extremely flammable, irritant, environmentally hazardous.

Coatings primer grey

ÖÖ -

Art. no.: 69645058

Paint Master Marker Eco Generation 2

Paint Master Marker Eco Generation 2

Art. no.: 37798685

Paint Master Marker Eco Generation 2

Paint Master Marker Eco Generation 2

Paint Master Marker Eco Generation 2

Paint Master Marker Eco Generation 2

Paint Master Marker Eco Generation 2

Marking paint Master marker fluorescent

Marking paint Master marker fluorescent

Art. no.: 419413

Master Markör is a quick-drying marker spray that can be used on substrates such as asphalt, concrete, grass, gravel, etc. It is even possible to mark symbols thanks to the extension tips available for the nozzle. Master Markör is the standard marking spray for telecom, construction, electrical, and water utilities. Used by the construction industry, street and road crews, land survey, etc. Master Markör is manufactured with an intelligently-designed 360 degree valve, which allows for both horizontal and vertical use. Self-cleaning valve. 600 ml.

Marking paint Master marker fluorescent

Marking paint Master marker fluorescent

Marking paint Master marker fluorescent

Marking paint Master marker fluorescent

Marking paint Master marker fluorescent

Line Marking Paint Soppec Tracing Pro

Line Marking Paint Soppec Tracing Pro

Art. no.: 60319476

Line Marking Paint Soppec Tracing Pro

Line Marking Paint Soppec Tracing Pro

MARKING PAINT MASTER MARKER

MARKING PAINT MASTER MARKER

Art. no.: 108574

A marking colouring for the building and construction industry's need for fast and reliable markings in setting out and dimensioning. A fast-drying colouring that adheres to concrete, asphalt, stone, earth and wood. Contains 600 ml and is lead-free and cadmium-free. Can be applied in all directions. Consumption 1 can to about 3.5 m ².

MARKING PAINT MASTER MARKER

MARKING PAINT MASTER MARKER

MARKING PAINT MASTER MARKER

MARKING PAINT MASTER MARKER

MARKING PAINT MASTER MARKER

Brand color Mercalin RS

Art. no.: 308296

Mercalin RS is a versatile marking spray for setting out, marking and geodetics at roads, building and tunnel construction, mining, excavation etc. The integrated cap together with 360 degree valve make use easy. RS attaches to most surfaces, including damp surfaces, such as asphalt, concrete, grass, gravel, wood, stone and ice. Comes in 500 ml.

Flexcoat Sunchem

Flexcoat Sunchem

Art. no.: 19050880

Crack indicater bycotest 103

Crack indicater bycotest 103

Art. no.: 175774

Fine-grained black magnetic powder in petroleum suspension. Fulfils the technical requirements of SAE AMS 3043 Free of corrosive substances such as sulphur and halogens, in accordance with ASME B&PV Code and EN ISO 9934-2. The carrier liquid is free from aromatic hydrocarbons. Aerosol 400 ml, 360° - valve. Hazard labelling: Extremely flammable.

Dilution cellulose

Dilution cellulose

Art. no.: 292656

Cellulose thinner for dilution of lacquer paint and cleaning of paint brushes and tools. Glove type: 4h. Hazard labelling: Highly flammable, harmful to health.

Dilution cellulose

Dilution cellulose

Dinitrol sim

Art. no.: 249513

Crack indication system consisting of cleaner, indicator and developer. Used on metal, glass, ceramic and for most plaster. The three products are combined in order to indicate cracks and pores in the goods. Cracks down to approx. 3/1000 mm are discovered directly. Complies with the Nuclear Industry Standards. Cleaner 249268: DOES NOT COMPLY WITH DETERGENT REGULATIONEN 648/2004 e.g. Hazard marking: extremely flammable, irritant, environmentally hazardous. Indicator 250550, Hazard marking: extremely flammable, irritant, environmentally hazardous. Cleaner 249513, Hazard marking: extremely flammable, irritant.

Detergent nitor paintwash

Detergent nitor paintwash

Art. no.: 292660

Cleaning agents Nitor paint wash. For cleaning painted surfaces indoors before painting. 1 litre. Risk labelling; irritating.

Crack indicater bycotest c5

Crack indicater bycotest c5

Art. no.: 193398

Petroleum-based cleaners and penetrant removers. Free of corrosive substances such as sulphur and halogens, in accordance with ASME B&PV Code and EN ISO 3452-2. Easily removes oil and grease from metal materials. Evaporates slowly. Hazard labelling: Extremely flammable.

Crack indicater bycotest c10

Crack indicater bycotest c10

Art. no.: 255286

Alcohol-based cleaners and penetrant removers. Free of corrosive substances such as sulphur and halogens, in accordance with ASME B&PV Code and EN ISO 3452-2. Highly suitable for general cleaning in industry. Slow-evaporating Paint remover for Bycotest contrast paint 104A. Hazard marking: extremely flammable.

Lime remover acid salt 30%

Lime remover acid salt 30%

Art. no.: 292658

Descaler Hydrochloric acid, 30% technical. For lime and rust removers. Hazard labelling: corrosive.

Lime remover acid salt 30%

Wood oil teakoil nitor

Wood oil teakoil nitor

Art. no.: 308247

Nitor Teak Oil is based on boiled linseed oil and protects and preserves the beautiful lustre of the wood. The oil removes greyness in dehydrated wood and is intended for garden furniture, impregnated wood, wooden boats, etc. Quick penetration and dry with high dry content. Intended for outdoor use. Labelling: harmful to health.

Caustic soda Nitor inside

Caustic soda Nitor inside

Art. no.: 292636

Heavy-duty cleaner that dissolves grease, food, hair and any other organic materials in drains and floor drains. Kills odour- and disease-causing bacteria. For venting of oil paint. Effective in heavy-duty cleaning of e.g. garage floors. When diluted with a lot of water it is not dangerous to the environment. Hazard labelling: very corrosive. To be handled with care. Read the warning text on the bottle carefully.

Aerosol galvacolor

Aerosol galvacolor

Art. no.: 311544

Aerosollack 2 in 1 Galvacolor protects the metal against corrosion with zinc phosphate and colour pigment in corrosive environments. Primer and top lacquer in the same products. Quick-drying, long-acting and silk-matt surface. Area of application: pipes, machinery, metal structures etc. Hazard labelling: extremely flammable.

Aerosol galvacolor

Aerosol galvacolor

Spray handle mercalin long

Spray handle mercalin long

Art. no.: 311553

Spray handle with wheels. Suitable for Mercalin RS, Mercalin Marker, Mercalin Striper and Mercalin Striper Pro. For unloading and high-precision results. Ergonomically-designed.

Spray handle mercalin long

Spray handle mercalin gun

Spray handle mercalin gun

Art. no.: 311554

Gun spray handle in plastic. Suitable for Mercalin RS, Mercalin Marker, Mercalin Striper, Mercalin Striper Pro. For unloading and high-precision results. Ergonomically-designed.

Spray handle mercalin gun

Spray-paint rust oleum

Spray-paint rust oleum

Art. no.: 297541

RUST-OLEUM® Hard Hat Aerosol top paints 2100 is based on a quick-drying, short soy oil alkyd. The products are based on lead- and chromium-free pigments. RUST-OLEUM top paints 2100 must be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or on necessary cleaned and painted foundations. RUST-OLEUM top paints 2100 is designed for minor maintenance works or for improvement painting. RUST-OLEUM top paints 2100 must be used in lighter industrial environments, normal humidity and indoor application.

Surface finish: high gloss
Colour: Optional RAL-NCS colour
Fuel: di-methyl ether
recommended dry film thickness: 25my dry, equal to 100my wet
Dust dry: 15 minutes
Operational: 30 minutes
Re-paintable: within 1 hour or in 48 hours
Full hardness: 7 days
Heat resistance: 100°C (dry heat)
Theoretical coverage: 2.5 m²/spray can with dry film thickness of 25my

The practical coverage depends on many factors such as the porosity and roughness of the foundation and the material loss during application.
Remove dirt, grease, oil, loose rust and all other pollutants from the foundation in a suitable manner.
Polish the existing colour layer, which is in good condition in order to break the gloss and get a slightly coarse surface. The surface must be clean and dry during application. Remove the protective cap. Shake energetically for at least one minute after hearing the ball. Shake continuously during use.
Hold the can at a distance of approx. 25 cm from the foundation. Move the can back and forth in parallel with the base.
Move the can continuously while spraying to avoid running. Apply several thin layers with several pauses in order to achieve sufficient thickness. Turn the can upside down after use and spray the nozzle clean for 2-3 seconds.
For optimal result, the relative air humidity must be under 85% and the temperature of the can must be above 0°C.
Clear colours can need a light coloured primer/intermediate layer.

Enamel varnish repair color

Enamel varnish repair color

Art. no.: 317989

Enamel paint is a white touch-up treatment for damage to stoves, washing machines, bathtubs, etc. Water and heat resistant to +125 ° C. Hazard labelling: highly flammable, harmful to health.

Spray-paint rust-oleum

Spray-paint rust-oleum

Art. no.: 304356

Topcoat Metallic Rust-Oleum for application on ground metal or cleaned painted surfaces. Also useful as top colour on top of zinc-rich colours, on zink-coated or galvanised surfaces. Ideal for machines, pumps, tool boxes, etc. Seal with transparent top coat for optimal results. Hazard labelling: Extremely flammable, harmful to health.

Battery water

Art. no.: 192861

T-water for batteries, steam irons and fine cleaning. The water level shall be approximately 5 mm above the plates close to the batteries and with T-water in a steam iron, lime residues will be avoided. T-Water is de-ionised water for technical use.

Alcohol fuel/cleaner kemetyl

Alcohol fuel/cleaner kemetyl

Art. no.: 113478

T-Red is used as a detergent for e.g. windows, mirrors, TV-screens, sanitary ware, etc. is a solvent for some paints and stains and is a frost protection for the cars windscreen washing system, plumbing systems, etc. Hazard labelling: Highly flammable, irritant.

Alcohol fuel/cleaner kemetyl

Alcohol fuel/cleaner kemetyl

White spirit kemetyl 1lit

White spirit kemetyl 1lit

Art. no.: 311525

Kemetyl white spirit for dilution of oil and acrylic paints according to the paint manufacturers instructions. Cleaning of painting tools that have been used for paint can be done by washing in white spirit. Also used as a stain remover on floors, painted surfaces, tiles, textiles, furniture, etc. White spirit is dearomatised, which means that it only releases a weak smell and is less dangerous for health and environment than ordinary white spirit. Hazard labelling: Harmful to health.

White spirit kemetyl 1lit

Lighter fluid kemetyl

Lighter fluid kemetyl

Art. no.: 177719

T-Yellow is an effective lighting fluid for grills and fires. It is also good as fuel for kerosene stoves and heaters. When lighting the grill,T-yellow is spread evenly over the coal/briquettes/wood and allowed to soak in for 1-2 minutes before lighting. The best grill results are obtained when the glowing bed has become grey. Hazard labelling: Harmful to health.

Dilution cellulose

Dilution cellulose

Art. no.: 292657

Thinner Benco 85 for dilution of lacquer paint and cleaning of paint brushes and tools. Glove type: 4h. Hazard labelling: Highly flammable, harmful to health.

Sheet metal color coro flex

Sheet metal color coro flex

Art. no.: 370581

Coro-Flex It is an elastic sheet metal paint that builds sickness, with rust protection and sealing qualities. The product is both a base and top coat in one and can be applied on clean metal, lightly rusty, galvanised or painted surfaces. Coro-Flex Provides long lasting protection for sheet metal roofs, sheet metal façades, metal plated chimneys, ventilation hoods, gutters and drainpipes, windowsills, barge boards and other objects in corrosive environments. The product is water-based and provides a silky, matte smooth finish even when applied with paintbrush and roller.
Features
• Super elastic (> 200%) - follows the underlay’s movements
• Builds thickness - seals leakage
• Base and top paint in one - fewer products
• Water-based - no unpleasant smell
• Corrosion protection - maintains the object
• UV and weather resistant - permanent function
• Extreme adhesive - does not flake off
• Good spreading qualities - smooth finish with out brush marks. Hazard marking: highly flammable, harmful to health, environmentally hazardous.

Leak finder eco crc

Leak finder eco crc

Art. no.: 124236

Leakage seeker for all types of gases and compressed air equipment. Discovers and localises pressure losses and gas leaks quickly and safely. For all types of gases: propane, butane, LPG, etc. Does not discolour, safe on plastic, steel, aluminium, etc. noncorrosive, non-toxic, not flammable.
Area of application: The boat, the caravan, the fridge, the air-conditioning, the exhaust system, etc.

Spray-paint master

Spray-paint master

Art. no.: 109683

Master Snabblack It is a quick-drying lacquer paint that adheres to most wood and metal materials. It has good coverage abilities and is tack-dry within 3-5 minutes depending on the temperature. 400 ml. Hazard labelling: Extremely flammable.

Spray-paint master

Spray-paint master

Marking & Chafing Paint Skavin

Marking & Chafing Paint Skavin

Art. no.: 116141

For joining and sustaining work, chafering and grinding of machine prisms, sealing plans, cones and other tool details. Does not drive.

Glue wash prol p613

Glue wash prol p613

Art. no.: 471341

Glue remover, specially designed for dissolving matt glue but can also dissolve most one-component adhesives. Works quickly and effectively leaving no residue. Apply and allow to take effect, then dry. Hazard labelling: Irritant.

Crack ind. bycotest d30 plus

Crack ind. bycotest d30 plus

Art. no.: 370645

High sensitivity activator for penetrant testing, with coloured or fluorescent penetrant. Non-corrosive substances in accordance with ASME B&PV Code and EN-ISO 3452-2. Fast evaporation. 400 ml aerosol. Hazard labelling: Extremely flammable.

Anti-corrosion paint Combicolor

Anti-corrosion paint Combicolor

Art. no.: 304360

A paint that combines the rust protection function of primers and high gloss in one and the same product. The paint has long service life and is easy to apply. Requires minor surface preparations. The paint has very good coverage, only one layer is needed in most cases. For extra good rust protection, first apply CombiPrimer 3369/3380 on the surface. Lead- and chromium-free.

Temperature resistance: +90 °C
Coveorage: 10.3 m²/litre
Dilution and cleaning: Rust-Oleum Thinner 7301
Operating temperature: Between 0°C and +35°C

Mercalin Marker

Mercalin Marker

Art. no.: 297526

For marking and setting out in bright fluorescent colors. High coverage and strong colours with 360 ° valve. Attaches to most surfaces, even damp ones. The marking will stay for about 4-6 months. Comes in 500 ml can.

Mercalin Marker

Mercalin Marker

Mercalin Marker

Mercalin Marker

Mercalin Marker

MARKING PAINT SOPPEC PROMARKER

MARKING PAINT SOPPEC PROMARKER

Art. no.: 370572

Non-florescent marking colour. The marking colour from Soppec is equipped with a unique patented safety cap, which protects the nozzle from damage and being involuntarily activated. Lasts about 9-10 months depending on the surface.

Features
• Well visible colors
• High mechanical strength and good weather resistance thanks to the acrylic bindings
• Can be used even at low temperatures
• Dries quickly even in moist substrates
• Aroma free formula (free from toluene, xylene, etc.)
Respects Environment, Health, Safety
• Can always be emptied to the last drop

MARKING PAINT SOPPEC PROMARKER

MARKING PAINT SOPPEC PROMARKER

MARKING PAINT SOPPEC FLUO TP

MARKING PAINT SOPPEC FLUO TP

Art. no.: 370574

Fluorescent dye for construction and installation.
The marking colour from Soppec is equipped with a unique patented safety cap, which protects the nozzle from damage and being involuntarily activated. Lasts about 9-10 months depending on the surface.

Features
• Well visible colors
High mechanical strength
• Can be used even at low temperatures
• Fast drying even on damp surfaces
• Aroma free formula (free from toluene and xylene)
• Respects health, environment and safety (no St. Andrew's cross, Not Xi irritant or Xn harmful)
• Can always be emptied to the last drop

MARKING PAINT SOPPEC FLUO TP

MARKING PAINT SOPPEC FLUO TP

MARKING PAINT SOPPEC FLUO TP

MARKING PAINT SOPPEC FLUO TP

MARKING PAINT SOPPEC FLUO TP

MARKING SPRAY SOPPEC IDEAL

MARKING SPRAY SOPPEC IDEAL

Art. no.: 370569

Fluorescent marking spray which can be used in all directions thanks to the 360-degree valve.

MARKING SPRAY SOPPEC IDEAL

MARKING SPRAY SOPPEC IDEAL

MARKING SPRAY SOPPEC IDEAL

Spray handle Spraymaster far

Spray handle Spraymaster far

Art. no.: 295070

Long handle that facilitates marking with vertical spray, 80 cm to Master Markers.

Touch Up Color Touch Up White

Touch Up Color Touch Up White

Art. no.: 462061

Repair lacquer, white matte, is an aqueous white-pigmented lacquer for repairs of lacquered wood surfaces. Dark brown glass bottle with brush on the lid.

Smokers Multitec

Smokers Multitec

Art. no.: 3842165V

Leak detector Multitec®, 400 ml Unipak

Spray paint Rust-Oleum Hard Hat heat resistant

Spray paint Rust-Oleum Hard Hat heat resistant

Art. no.: 377174

Heat-resistant paint based on silicone-modified alkyl resin. Used for maintenance or touch up painting on new, barbed steel, blasted steel or galvanized steel surfaces or on pre-treated painted surfaces such as grills, fireplace equipment, heaters, etc.

High-temperature paint color Master 600

High-temperature paint color Master 600

Art. no.: 192829

Master 600 has been developed for surfaces exposed to high temperatures. Tolerates up to 600 C without changing colour. the paint contains a silicon binder to withstand heat and protect against rust/. Master 600 is used to protect your outdoor grill, blasted and ground sheet metal and cast metal against the material destruction that heat can cause.

High-temperature paint color Master 600

Markerwagen Masterliner

Markerwagen Masterliner

Art. no.: 462198

Line wagon for Teknoroad line spray and Master Markör colour marker.

Laminate Casco 2518

Laminate Casco 2518

Art. no.: 115605

Water soluble. Removes excess adhesive. Used for removal of residual adhesive from dispersions, contact and resin adhesives. Also suitable to mix in wash water for removal of extruded adhesive when laying floor and wall materials. No water-based constituents. Designed for removal of residual adhesive when glueing PVC, linoleum and Polyolefin carpets to the floor or PVC matting to the wall. UN1263.

Showing 52 of 73