Spray-paint rust oleum

RUST-OLEUM® Hard Hat Aerosol top paints 2100 is based on a quick-drying, short soy oil alkyd. The products are based on lead- and chromium-free pigments. RUST-OLEUM top paints 2100 must be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or on necessary cleaned and painted foundations. RUST-OLEUM top paints 2100 is designed for minor maintenance works or for improvement painting. RUST-OLEUM top paints 2100 must be used in lighter industrial environments, normal humidity and indoor application.

Surface finish: high gloss
Colour: Optional RAL-NCS colour
Fuel: di-methyl ether
recommended dry film thickness: 25my dry, equal to 100my wet
Dust dry: 15 minutes
Operational: 30 minutes
Re-paintable: within 1 hour or in 48 hours
Full hardness: 7 days
Heat resistance: 100°C (dry heat)
Theoretical coverage: 2.5 m²/spray can with dry film thickness of 25my

The practical coverage depends on many factors such as the porosity and roughness of the foundation and the material loss during application.
Remove dirt, grease, oil, loose rust and all other pollutants from the foundation in a suitable manner.
Polish the existing colour layer, which is in good condition in order to break the gloss and get a slightly coarse surface. The surface must be clean and dry during application. Remove the protective cap. Shake energetically for at least one minute after hearing the ball. Shake continuously during use.
Hold the can at a distance of approx. 25 cm from the foundation. Move the can back and forth in parallel with the base.
Move the can continuously while spraying to avoid running. Apply several thin layers with several pauses in order to achieve sufficient thickness. Turn the can upside down after use and spray the nozzle clean for 2-3 seconds.
For optimal result, the relative air humidity must be under 85% and the temperature of the can must be above 0°C.
Clear colours can need a light coloured primer/intermediate layer.