Paint - varnish - solvent

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Ethylene Glycol Earthcare 30% with Corrosion Inhibitor
Ethylene Glycol Earthcare 30% with Corrosion Inhibitor
Art. no.: 471184
EarthCare Monoethylene glycol is formulated on a recycled glycol, which means an environmental advantage in the form of reduction of CO 2 emissions compared to a product that is not based on recycled raw material (calculated by RISE). It is available as a concentrate to ready-mixed 30%. Assessed by both Byggvarubedömningen and Sunda Hus. EarthCare Monoethylene glycol has a wide range of uses that provide long-term protection, reduced viscosity, increased heat capacity and thermal conductivity below the freezing point. Added corrosion inhibitor is nitrite, amine, phosphate, borax and silicate free which makes it gentle on pumps and compatible with most metals in pipelines. EarthCare Monoethylene glycol is an uncoloured product, as paint additives are not environmentally friendly. This product is designed to be used for all real estate and process applications. Closed cooling and heat recovery systems and industrial process cooling. Used product regardless of make, can be handed over to Recyctec at handling cost to enable continued reuse. Contact order@recyctec.se or 010-209 00 28. See symbol for product sheet for more detailed product information.
Spray-paint rust oleum
Rust Oleum
Spray-paint rust oleum
Art. no.: 297541
RUST-OLEUM® Hard Hat Aerosol top paints 2100 is based on a quick-drying, short soy oil alkyd. The products are based on lead- and chromium-free pigments. RUST-OLEUM top paints 2100 must be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or on necessary cleaned and painted foundations. RUST-OLEUM top paints 2100 is designed for minor maintenance works or for improvement painting. RUST-OLEUM top paints 2100 must be used in lighter industrial environments, normal humidity and indoor application.

Surface finish: high gloss
Colour: Optional RAL-NCS colour
Fuel: di-methyl ether
recommended dry film thickness: 25my dry, equal to 100my wet
Dust dry: 15 minutes
Operational: 30 minutes
Re-paintable: within 1 hour or in 48 hours
Full hardness: 7 days
Heat resistance: 100°C (dry heat)
Theoretical coverage: 2.5 m²/spray can with dry film thickness of 25my

The practical coverage depends on many factors such as the porosity and roughness of the foundation and the material loss during application.
Remove dirt, grease, oil, loose rust and all other pollutants from the foundation in a suitable manner.
Polish the existing colour layer, which is in good condition in order to break the gloss and get a slightly coarse surface. The surface must be clean and dry during application. Remove the protective cap. Shake energetically for at least one minute after hearing the ball. Shake continuously during use.
Hold the can at a distance of approx. 25 cm from the foundation. Move the can back and forth in parallel with the base.
Move the can continuously while spraying to avoid running. Apply several thin layers with several pauses in order to achieve sufficient thickness. Turn the can upside down after use and spray the nozzle clean for 2-3 seconds.
For optimal result, the relative air humidity must be under 85% and the temperature of the can must be above 0°C.
Clear colours can need a light coloured primer/intermediate layer.
Sheet metal color coro flex
Sheet metal color coro flex
Art. no.: 370581
Coro-Flex It is an elastic sheet metal paint that builds sickness, with rust protection and sealing qualities. The product is both a base and top coat in one and can be applied on clean metal, lightly rusty, galvanised or painted surfaces. Coro-Flex Provides long lasting protection for sheet metal roofs, sheet metal façades, metal plated chimneys, ventilation hoods, gutters and drainpipes, windowsills, barge boards and other objects in corrosive environments. The product is water-based and provides a silky, matte smooth finish even when applied with paintbrush and roller.
Features
• Super elastic (> 200%) - follows the underlay’s movements
• Builds thickness - seals leakage
• Base and top paint in one - fewer products
• Water-based - no unpleasant smell
• Corrosion protection - maintains the object
• UV and weather resistant - permanent function
• Extreme adhesive - does not flake off
• Good spreading qualities - smooth finish with out brush marks. Hazard marking: highly flammable, harmful to health, environmentally hazardous.
Showing 52 of 73