Order lines: 0

Ahlsell Products MountingConstruction fittings

Construction fittings

Perforated plates

Ceiling brackets

Is your workplace in need of construction fittings? At Ahlsell, we offer a wide range of concrete fasteners, plugs, fittings, screws, nails, rivets, washers, nuts and assembly details to help you choose the right fastener. Good products with a long life are important to us. That's why our construction fittings are of the highest quality. With our products, you have the material required to carry out work projects with flying colours. Explore our wide range of construction fittings online or visit your nearest Ahlsell store

Ground screw Stavrex

Ground screw Stavrex

Art. no.: 762500

Ground screw Stavrex

Ground screw Stavrex

Ground screw Stavrex

Angular brackets 407, 408 and 409

Angular brackets 407, 408 and 409

Art. no.: 232357

Angular bracket 407 is usually used as a cross brace in wood for small or medium loads. The angle brackets 408 and 409 are used for bolt attachment between wooden structures and concrete, aerated concrete or brick and for connection between wall bracket and sill. Other: Nail hole Ø 5 mm. Bolt hole Ø 10.2 mm (408, 409).

Angular brackets 407, 408 and 409

Angular brackets 407, 408 and 409

Angular brackets 407, 408 and 409

Adjustable Terrace Foot

Adjustable Terrace Foot

Art. no.: 763150

Plankskruv Stavrex

Plankskruv Stavrex

Art. no.: 762517

Plankskruv Stavrex

Joist hanger eta

Joist hanger eta

Art. no.: 232216W

Used for joining of wooden beams in the same plane and for joining posts and beams made of laminated timber. The beam is provided with both nail and bolt holes and can be mounted to wood, concrete, aerated concrete or brick.

Joist hanger eta

Joist hanger eta

Joist hanger eta

Joist hanger eta

Joist hanger eta

Angle fitting 470

Angle fitting 470

Art. no.: 269928

The angle bracket is used mainly for cross joints of wood e.g. between truss and wall plate at roof ridge anchoring to bearing beams. The bracket can be used for bolt attachment to concrete, light concrete or tile. Delivered with (W) or without (W/O) reinforcement. Other: Nail hole Ø 5 mm. Bolt hole Ø 11 mm.

Angle fitting 470

Angle fitting 470

Pole climber type l

Pole climber type l

Art. no.: 232348W

Type L is used for embedding in concrete for wooden pole attachment. Type L is e.g. usable when the wood width does not fit pole shoe B. Miscellaneous: Nail hole Ø 5 mm. Bolt hole Ø 13.5 mm.
The length of the reinforcement bar is 250 mm for pole shoes with thickness of 4 mm. The diameter of the reinforcement bar is 16 mm for all type L.

Pole climber type l

T-Beam anchor

Art. no.: 281065

T-beam anchors are used e.g. when attaching wooden structures to steal beams using flanges. Material: 3.0 mm hot-dip galvanised steel plate, zinc layer approx. 20 µm. Climate class 2.

Beam strap

Art. no.: 281066

The joist strap is used e.g. when wooden beams are cut in order to insert a steel beam. The fixture carries the tractive forces found in the floor beam. Always installed with 2 fittings per joint.

Setting angle/ Vall angle

Setting angle/ Vall angle

Art. no.: 313177

Exposer angle/Wall spacer.

Roof connector 210

Roof connector 210

Art. no.: 232388

Mainly used for anchoring of roof ridge anchoring to primary beams. The fixing is particularly useful in structures that are provided with imbedded body or where it is not important whether the fixing is visible.

Roof connector 210

Roof connector 210

Roof connector univ f100

Roof connector univ f100

Art. no.: 224101

Mainly used for anchoring of roof ridge anchoring to primary beams. The fixing is particularly useful in structures that are provided with imbedded body or where it is not important whether the fixing is visible. The Universal type can be used for both right and left fixing and is available on two sizes; 170 and 210.

Roof connector univ f100

Fork Anchor

Art. no.: 232232W

Fork anchor is primarily used as bonding between roof truss and underlying structures. The bracket is used mainly for wooden cross joints.

Ang Fitting

Art. no.: 232366W

The angle bracket is used mainly for wooden cross joints e.g. between roof truss and wall plate, for anchoring of roof ridges to bearing beams as well as for post/beam fixings. The bracket can be used for bolt attachment to concrete, aerated concrete or brick. Delivered with (W) or without (W/O) reinforcement. Other: Nail hole Ø 5 mm. Bolt hole Ø 11 mm.

Angle Bracket 403, 404 and 405

Angle Bracket 403, 404 and 405

Art. no.: 232354W

The angle bracket is used primarily in connection with bolt attachment between wooden structures and concrete, aerated concrete or brick. The bracket can also be used as wooden cross joint between roof truss and wall plate or as connection between wall bracket and sill. Other: Nail hole Ø 5 mm. Bolt hole Ø 13 mm.

Angle Bracket 403, 404 and 405

Angle Bracket 403, 404 and 405

Angle Bracket 403, 404 and 405

Angular Bracket 4060

Angular Bracket 4060

Art. no.: 232376

Bracket No. 406 is used mainly as a cross-link in wood for minor or moderate loads and 406 EXP mainly between wooden structures and concrete, aerated concrete or brick. Other: Nail hole Ø 5 mm. 406 EXP also with 10.2 mm bolt holes.

Angular Bracket 4060

Angular Bracket 4060

Angle Fitting 411

Angle Fitting 411

Art. no.: 232370W

Angular brackets 410 and 412 are used as a cross brace in wood and are intended for small loads. Angle bracket 411 is used primarily for bolt attachments between wooden structures and concrete, aerated concrete or brick. Other: Nail hole Ø 5 mm. Bolt hole Ø 10.2 mm. 411 also with grooves 10.5x30 mm.

Angle Fitting 411

Angle Fitting 411

Angular bracket 413

Angular bracket 413

Art. no.: 232345

Angular bracket 413 is used as a cross brace in small wooden structures. Other: Nail hole Ø 5 mm.

Angular bracket 413

Angle brackets 420 and 425

Angle brackets 420 and 425

Art. no.: 232379

The angle bracket is used primarily in connection with bolt attachment between wooden structures and concrete, aerated concrete or brick. The bracket can also be used as wooden cross joint e.g. between roof truss and wall plate or as connection between wall bracket and sill. Other: Nail hole Ø 5 mm. Bolt hole Ø 11 mm.

Angle brackets 420 and 425

Angle brackets 433, 434 and 4434

Angle brackets 433, 434 and 4434

Art. no.: 232359

The angular bracket is primarily used as wooden cross brace. The bracket can be effectively used for connection between e.g. sill and wall bracket. Other: Nail hole Ø 5 mm.

Angle brackets 433, 434 and 4434

Angle brackets 433, 434 and 4434

Angular brackets P1 and P2

Angular brackets P1 and P2

Art. no.: 232372

The angle bracket is used primarily in connection with bolt attachment between wooden structures and concrete, aerated concrete or brick. The bracket can also be used as wooden cross joint e.g. between roof truss and wall plate or as connection between wall bracket and sill. Other: Nail hole Ø 5 mm, slot 5x30 mm.

Angular brackets P1 and P2

Angle bracket eta

Angle bracket eta

Art. no.: 127763

The angle bracket is used mainly for cross joints of wood e.g. between roof truss and wall plate, for anchoring of roof ridges to bearing beams as well as for anchoring of wall bracket to sill.

Angle bracket eta

Concrete angle

Art. no.: 232351

Concrete angle brackets are used for bolt attachment between wooden structures and concrete. Other: Slot 14x30 mm (Type A).

Gerber Fittings

Gerber Fittings

Art. no.: 254935

Gerber bracket is designed for joining purlins at torque zero points. The bracket that is easy to mount and only requires right-angled cutting of the beam.

Gerber Fittings

Knagge

Art. no.: 287084

The bracket is used for connection of ridge to beam, where the ridge is exposed to large tilting and lifting forces. Other: Nail hole Ø 5 mm.

Mini angle bracket

Mini angle bracket

Art. no.: 232363W

Intended for repairs of garden furniture and fragile wooden structures.

Mini angle bracket

Mini angle bracket

Mini angle bracket

Perforated plates 1,5mm

Perforated plates 1,5mm

Art. no.: 302426

Perforated plates and perforated lengths are primarily used as joint plate in wooden structures e.g. roof trusses. To avoid eccentric loading, it is advisable to use two plates per joint.

Perforated plates 1,5mm

Perforated plates 2,0mm

Perforated plates 2,0mm

Art. no.: 232314

Perforated plates and perforated lengths are primarily used as joint plate in wooden structures e.g. roof trusses. To avoid eccentric loading, it is advisable to use two plates per joint.

Perforated plates 2,0mm

Perforated plates 2,0mm

Perforated plates 2,0mm

Perforated plates 2,0mm

Perforated plates 2,0mm

Punched bands

Art. no.: 145430

Perforated strip is used for anchoring wooden structures for wind load. Can be used for mounting of ventilation ducts. Perforated strip 1.0x20 and 1.5x20 can be bent and twisted in place while 2.0x25 is primarily intended for use as flat fittings. When a perforated strip is used the rules for edge distance, internal nail distance, etc. in accordance with BKR (the design rules of the Swedish National Board of Housing, Building, and Planning) must be applied. Anchorings should be performed so that their are no loose connections if the woodwork shrinks. The perforated strip should be stretched hard before firmly nailing down.

Mount.band ffzv

Mount.band ffzv

Art. no.: 232310W

Mounting tape is used for example for suspension of pipes, cable trays, ceilings and ventilation ducts.

Mount.band ffzv

Mount.band r2333

Mount.band r2333

Art. no.: 3817708

Mounting tape is used, e.g., for suspension of pipes, cable racks, sub ceilings, and ventilation shafts. The tape is supplied in 25-metre rolls in a practical cross-tied roll, making it easier to handle at the work site and reducing waste.

Straps hdg

Art. no.: 127774

Strapping is used for stabilisation of wooden structures. They are also used as cross braces in floors and walls. When a perforated strip is used the rules for edge distance, internal nail distance, etc. must in accordance with BKR (the design rules of the Swedish National Board of Housing, Building, and Planning) must be applied. In order for the strap lashings to have the intended effect it is important that they are mounted well-tensioned.

Pole climber hero adjustable

Pole climber hero adjustable

Art. no.: 228435

HERO post shoes consist of a complete programme of adjustable post shoes that can be adjusted 55 to 235 mm vertically after mounting, without the woodwork needing to be lifted. HERO post shoes are for both embedding in concrete and bolting into wood concrete. Minimum drill dimension for use of chemical anchors is Ø 26mm. Material: 4.0 mm steel, hot-dip galvanised after welding. Other: Nail hole Ø 5 mm. Bolt hole Ø 10 and 12 mm. The length of the reinforcement bar is 200 mm.

Pole climber hero adjustable

Pole climber hero adjustable

Pole climber hero adjustable

Pole climber type b

Pole climber type b

Art. no.: 269925

Used for embedding in concrete for wooden pole attachment. For example, fences, pergolas, carports and porches. Material: 4.0 and 5.0 mm steel, hot-dip galvanised after welding. Other: Nail hole Ø 5 mm. Bolt hole Ø 13.5 mm.
The length of the reinforcement bar is 200 mm (4 mm) and 250 mm (5 mm) respectively.
For post shoes of 90 mm width the diameter of the reinforcement iron should be 18 mm (thickness. 4 mm) and 20 mm (thickness. 5 mm) , otherwise 16 mm.

Pole climber type b

Column Anchor Strap

Column Anchor Strap

Art. no.: 232349W

The post iron is used for embedding in concrete as well as attachment for wooden posts to fences, porches, etc. Material: 6.0 and 8.0 mm hot-dip galvanised iron.

Column Anchor Strap

Column Anchor Strap

Pole Spear

Art. no.: 269920

Post lance for wooden posts for fences, pergolas, porches, etc. The post lance is hammered straight into the ground and provides good stability, no casting of concrete blocks is required.

Iron threshold

Art. no.: 295627

Threshold iron with welded-on cast iron is used as threshold reinforcement for garage doors. The threshold iron is cast in with inclination outwards for water drainage. Material: 5.0 mm hot-dip galvanised steel, 50x50 mm shanks.

Standing bracket with plate

Standing bracket with plate

Art. no.: 269923

Post bracket with plate for wooden posts for fences, pergolas, porches and so on. The plate makes it possible to mount directly on concrete or wood.

Standing bracket with plate

Angle bracket 412

Angle bracket 412

Art. no.: 232358

Angular bracket 412 is used as a cross brace in wood and is intended for minor loads. Other: Nail hole Ø 5 mm.

Angle bracket 412

Angle bracket 406 Stainless

Angle bracket 406 Stainless

Art. no.: 390655

Bracket No. 406 is used mainly as a cross-link in wood for minor or moderate loads and 406 EXP mainly between wood constructions and concrete, light concrete or brick. Other: Nail hole Ø 5 mm.

Pole climber adjust. highcarry

Pole climber adjust. highcarry

Art. no.: 389050

Height adjustable post shoe with plate for fixing with concrete bolt. In the post, holes are drilled for the M20 threadbar, which allows for adjusting the height of the posts. Washer 1 (top of post) 8x80x80mm, washer 2 (bottom for fixing in concrete) 6x80x87mm.

Pole climber adjust. highcarry

Angle bracket 403 Stainless

Angle bracket 403 Stainless

Art. no.: 390654

The angle bracket is used primarily in connection with bolt attachment between wooden structures and concrete, aerated concrete or brick. The bracket can also be used as wooden cross joint between roof truss and wall plate or as connection between wall bracket and sill. Other: Nail hole Ø 5 mm. Bolt hole Ø 13 mm.

Torvtakskrok

Art. no.: 389063

Roof brackets are used for roofs covered with turf. The roof brackets are manufactured of 6.0 mm hot-dip galvanised steel. Nail hole Ø 5.0 and 9.0 mm.

Angle bracket 436

Angle bracket 436

Art. no.: 389056

Used in connection with bolt attachment between wooden structures and concrete. Angle 436 is useful in connection with large lifting forces. Hot-dip galvanised steel plate in sub 350 material, a harder material compared to what is normally used.

Angle bracket 419

Angle bracket 419

Art. no.: 375259

Angle 419 is used in connection with bolt attachment between wooden structures and concrete, light concrete or brickwork.

Angle bracket 419

Stolpsko Adjustable

Stolpsko Adjustable

Art. no.: 403403

Adjustable pole shoe is used for mounting or replacement of wooden poles. The pole shoe can be adjusted in height 125-175 mm, sideways 70-120 mm and comes with a plate for bolt attachment in the foundation.

Anchor screw, exterior C4 FIXX

Anchor screw, exterior C4 FIXX

Art. no.: 472720

Sharp point and threads designed for anchoring in wood. The screw also has a cutting drill tip to prevent splitting in hardwood and cross-cut wood . Area of application: Screwing steel and sheet metal parts and building boards to wooden surfaces.

Hole plate 3.0 mm

Hole plate 3.0 mm

Art. no.: 454908

Perforated plates and perforated lengths are primarily used as joint plate in wooden structures e.g. roof trusses. To avoid eccentric loading, it is advisable to use two plates per joint.

Angle bracket 444

Angle bracket 444

Art. no.: 494569

Angle bracket 444

Angle bracket 444

Joist Hanger Fmh

Joist Hanger Fmh

Art. no.: 494573

Angular bracket 445

Angular bracket 445

Art. no.: 454926

Angle 2x83x62x40

Angle 2x83x62x40

Art. no.: 500499

Angle 2x83x62x40

Showing 52 of 66