Cable splice for round plastic insulated 3-conductor cable. Hybrid joint consisting of cold shrink body spread on spiral with integrated field control (geometric) and insulation for each conductor and outer hose of thick-walled heat shrink tubing for mechanical protection and moisture sealing. The joint is adapted to the supplied screw joint sleeves with break skull. Screw joint sleeve for screen included.

Bullet with 2 megapxel lens IP65

Use: For splicing of plastic-insulated earthed cable, 3-wire 12KV.
PLEASE NOTE! The splices allow jacket testing.
Standard: CENELEC HD 629.1.
Set contents: The hose set consists of Hoses for field control, insulation with an outer conductive layer, cover insulation hoses and installation accessories, excluding splice sleeves.
PLEASE NOTE! The splice is only approved for crimping.

The kit contains heat shrink tubes for oil barrier, phase screening as well as cable termination sleeves.

Applications:
Downlight with very good color reproduction which is excellent for general lighting.
Design:
Supplied with dimmable actuator and extra reflector for desired spreading angle.
aLED 8 comes with three reflectors (24 °, 36 ° and 64 °).
aLED 11 comes with two reflectors (24 ° and 36 °).
Mounting
Recessed ceiling, plaster, panel or similar. Installed with safety box.
aLED 8 Hole cutting 73 mm and recess depth 35 mm.
aLED 11 Hole cutting 79 mm and recess depth 67 mm.
Connection
Dimmable driver connected to 230V with quick-connect terminal and strain relief for cable or flex pipe. Double connections per conductor.
AmbiDim 2200-3000K

Ergonomic aid for mounting appliance boxes. Adjust the dose holder to the correct height, attach the box to the dose holder and easily mount all boxes on sheet metal or wooden bars at the same height. Marking spike in the dose holder for making holes, for example for root cans. Comes with a dose holder. Mounting height for box is on the short rod 60-890 mm and the longer rod 60-1380 mm

Downlight for general lighting in homes and spaces with normal ceiling height in public premises. Made of aluminum for optimal heat dissipation. Angled bar. To be fitted with a safety nest. Delivered in a package of six luminaires complete with drives.

Spotlight for lighting in shops and exhibitions. Mounted in three-phase rail. Interchangeable reflector 24 ° or 36 °.

Area of use:
Decoratively designed luminaire for general lighting in offices and similar environments with system ceilings.
Performance:
Recessed LED luminaire for ceilings. Comes with drive. Frame of white lacquered sheet steel with opal light openings.
Supplied with drive device for control on / off or dimmable device with corridor function for control with Dali or impulse switch.
IP class 44 from below.
Mounting:
Fits in the suspended ceiling's T-profile.
Connection:
Power luminaires are connected with a pre-assembled 2.2 m cable stand, Dali luminaires are delivered with a pre-assembled 2.5 meter 5-conductor.
When controlling with an impulse switch, a maximum of 30 luminaires can be connected per pushbutton.

Ceiling luminaires with a modern design language for indoor installation. Available in two sizes where the smaller can be set in three power steps 24W-18W-10W (2400lm-1800lm-1000lm) and the larger in two steps 38W-29W (3800lm-2900lm). Both sizes can be adjusted between 3000K and 4000K. All adjustment takes place with dip switches on the luminaire before assembly. The smaller luminaire is available as on/off and with HF sensor and background light. The sensor fixture cannot be used to control additional fixtures. The sensor fixture does not work optimally in rooms with irregular ceiling height and is therefore not recommended for e.g. stairwells. The larger fixture is available as an on/off and Dali/PushDim version. Both sizes can be mounted directly to the ceiling, the smaller one can also be mounted over a ceiling box.

Junction box halogen-free thermoplastic two 3-pole terminal blocks. Maximum connection area on terminal block: 5 x 1.5 mm², 4 x 2.5 mm² or 2 x 6 mm²

Replacement kit consisting of black frame, dimmer knob and center part for mounting in Elko or Exxact frame

LED actuator (combined LED actuator and LED dimmer) for constant current 350, 500 or 550 mA up to 8W. Equipped with dip switches for selection of outgoing current. Dimmed using spring-back pushbutton or 1-10V control unit. Up to 20 units can be dimmed with 1 pushbutton.

HF-Regulator II 1-10V TL-D
HF actuator for dimming with analogue control (1–10 V) for TL-D lamps