Order lines: 0

Ahlsell Products Electric Panels and fuses 20-24 21 Standard components Residual Current DeviceEarth fault breakers

Earth fault breakers

Do you need fuses? Ahlsell helps you find installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. We offer products from several well-known suppliers. Here you will find wall sockets, cable ladders, and accessories for easy installations. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. All the installation material you need under one roof. A job well done begins with good materials. Explore our wide range of fuses, installation materials, and accessories here in the online store or visit your nearest Ahlsell shop.

Earth fault breaker type B 4-pole 10kA, Garo

Earth fault breaker type B 4-pole 10kA, Garo

Art. no.: 2163167

Residual current circuit breaker type B 10kA 63A 30mA 4-pole. The neutral connection location on the earth fault circuit breaker is on the right side.

Earth fault breaker 2-pole type A, pro M compact

Earth fault breaker 2-pole type A, pro M compact

Art. no.: 2160114

Senses AC residual currents and pulsing DC residual currents.

Earth fault breaker 2-pole type A, pro M compact

Earth fault breaker 4-pole type A, pro M compact, left neutral.

Earth fault breaker 4-pole type A, pro M compact, left neutral.

Art. no.: 2160160

Senses AC residual currents and pulsing DC residual currents.

Earth fault breaker 4-pole type A, pro M compact, left neutral.

Earth fault breaker 4-pole type A, pro M compact, left neutral.

Earth fault breaker 4-pole type A, pro M compact, left neutral.

Earth fault breaker 5SV3 4-pole, with neutral to left

Earth fault breaker 5SV3 4-pole, with neutral to left

Art. no.: 2167805

An earth fault breaker is used as a supplementary protection to prevent personal injury and fires caused by an electric overload through insulation errors, damage or unintentional contact. For personal protection, and earth fault breaker is used with 10 or 30 mA error current sensitivity and for fire protection, and earth fault breaker with max 300 mA error current sensitivity is used. Earth fault breaker type A can handle detecting both alternating current and pulsating direct current errors. Each earth fault breaker must have its own neutral base/neutral bar, and neutral must be separated from the protective conductor. Earth fault breaker is connected upstream of the group or electrical apparatus to be protected. The earth fault breaker’s must be checked frequently with the test button that is on every earth fault breaker. When the test button is pressed, a fault current is simulated and the earth fault breaker must trigger.

Earth fault breaker 2-pole type A, Quick Connect

Earth fault breaker 2-pole type A, Quick Connect

Art. no.: 2163812

Earth fault breakers are used as personal or installation protection for conduction to earth that is greater than 10, 30 or 300 mA. All earth fault breakers are surge-proof, which means that they are protected against unnecessary disconnections from electric mains due to transients or what we call spikes. All earth fault breakers type A are DC pulse sensitive and can thus break the main circuit in the event of fault currents other than sinusoidal. A new DIN rail bracket with an advanced attachment mechanism means you can easily disconnect products from the DIN rail. A transparent protective cover for the marking areas on Hager’s new-generation modular components. To open and apply the marking strip, simply press the lower edge. Semilog labelling program can be downloaded at hager.se. Earth fault breaker with soft leads can be connected under phase rail with screw connectors. The phase rail is simply pressed into place; you need never re-tighten. NOTE: Hager’s KDNxxx phase rail must be used.

Earth fault breaker 4-pole type A Quick Connect

Earth fault breaker 4-pole type A Quick Connect

Art. no.: 2163820

Earth fault breakers are used as personal or installation protection for conduction to earth that is greater than 10, 30 or 300 mA. All earth fault breakers are surge-proof, which means that they are protected against unnecessary disconnections from electric mains due to transients or what we call spikes. All earth fault breakers type A are DC pulse sensitive and can thus break the main circuit in the event of fault currents other than sinusoidal.
A new DIN rail bracket with an advanced attachment mechanism means you can easily disconnect products from the DIN rail. A transparent protective cover for the marking areas on Hager’s new-generation modular components. To open and apply the marking strip, simply press the lower edge. Semilog labelling program can be downloaded at hager.se. Earth fault breaker with soft leads can be connected under phase rail with screw connectors. The phase rail is simply pressed into place; you need never re-tighten. NOTE: Hager’s KDNxxx phase rail must be used.

Earth fault breaker 4-pole type HI, extra disruption-proof

Earth fault breaker 4-pole type HI, extra disruption-proof

Art. no.: 2163611

HI earth fault breaker can distinguish inequalities between earth and phase side from actual earth fault. It can also identify high frequency currents or currents that are caused by connections and disconnections, that usually result in faulty trippings. Traditional earth fault breakers can trip if overcurrents occur (lightening strikes or other causes of transients), which this type of earth fault breaker does not do. Earth fault breakers is time delayed 200ms.

Earth fault breaker 2-pole type A

Earth fault breaker 2-pole type A

Art. no.: 2163652

Earth fault breakers are used as personal or installation protection for conduction to earth that is greater than 10, 30 or 300 mA. All earth fault breakers are surge-proof, which means that they are protected against unnecessary disconnections from electric mains due to transients or what we call spikes. All earth fault breakers type A are DC pulse sensitive and can thus break the main circuit in the event of fault currents other than sinusoidal. A new DIN rail bracket with an advanced attachment mechanism means you can easily disconnect products from the DIN rail. A transparent protective cover for the marking areas on Hager’s new-generation modular components. To open and apply the marking strip, simply press the lower edge. The Semiolog marking program can be downloaded at Hager.se

Earth fault breaker 4-pole type A, 25-63A

Earth fault breaker 4-pole type A, 25-63A

Art. no.: 2163660

The earth fault breaker is developed to protect people, animals and property in the event of direct or indirect contact. It measures earth fault current to earth. Earth fault breaker of type A for AC and pulsing DC fault currents and with the neutral on the left. 30 mA for personal protection and 300 mA for installation protection. Surge-proof, minimum temperature -25ºC and breaking capacity 6 kA. The earth fault breakers is in accordance with standard EN 61008. Conductor can be connected from the top or bottom side.

Earth fault breaker Xpole series PFIM, 2-pole, surge-proof 250A type A

Earth fault breaker Xpole series PFIM, 2-pole, surge-proof 250A type A

Art. no.: 2162205

Suitable for indoor use at -25ºC. Surge-proof version (250A, 8/20µs) for general use.Type PFIM-...-A. Pulse current sensitive, for use where pulsing DC fault currents can occur, surge-safe, non-selective, non-short-term delayed. Type PFIM-...-G/A. Short-term delayed earth fault breaker (min 10ms) for personal protection with power-safe version (3000A). Senses pulsing DC. Type PFIM-...- U. Selective earth fault breaker for frequency convertor operation, surge-safe up to 5000A.
* Connection of neutral to right.
* Connection of neutral to left.

Earth fault breaker Xpole series PFIM, 4-pole, surge-proof 250A type A

Earth fault breaker Xpole series PFIM, 4-pole, surge-proof 250A type A

Art. no.: 2162229

Suitable for outdoor use at -25ºC. Surge-proof version (250A, 8/20µs) for general use. Type PFIM-...-A. Pulse current sensitive, for use where pulsing DC fault currents may occur, surge-proof, non-selective, non-short term delayed. Type PFIM-...-G/A. Short-term delayed earth fault breaker (min 10ms) for personal protection with power-safe version (3000A). Senses pulsing DC. Type PFIM-...- U. Selective earth fault breaker for frequency convertor operation, surge-proof up to 5000A.
Connection of neutral to right.

Earth fault breaker Xpole series PFIM, 4-pole, surge-proof 250A type A

Earth fault breaker Xpole series PFIM, 4-pole, surge-proof 250A type A

Earth fault breaker Xpole series PFIM, 4-pole, surge-proof 250A type A

Art. no.: 2162377

Suitable for outdoor use at -25ºC. Surge-proof version (250A, 8/20µs) for general use. Type PFIM-...-A. Pulse current sensitive, for use where pulsing DC fault currents may occur, surge-proof, non-selective, non-short term delayed. Type PFIM-...-G/A. Short-term delayed earth fault breaker (min 10ms) for personal protection with power-safe version (3000A). Senses pulsing DC. Type PFIM-...- U. Selective earth fault breaker for frequency convertor operation, surge-proof up to 5000A.
Connection of neutral to left.

Earth fault breaker Xpole series PFIM, 4-pole, surge-proof 250A type A

Earth fault breaker Xpole series PFIM, 4-pole, surge-proof 250A type A

Earth fault breaker 5SV3 2-pole

Earth fault breaker 5SV3 2-pole

Art. no.: 2167736

An earth fault breaker is used as a supplementary protection to prevent personal injury and fires caused by an electric overload through insulation errors, damage or unintentional contact. For personal protection, and earth fault breaker is used with 10 or 30 mA error current sensitivity and for fire protection, and earth fault breaker with max 300 mA error current sensitivity is used. Earth fault breaker type A can handle detecting both alternating current and pulsating direct current errors. Each earth fault breaker must have its own neutral base/neutral bar, and neutral must be separated from the protective conductor. Earth fault breaker is connected upstream of the group or electrical apparatus to be protected. The earth fault breaker’s must be checked frequently with the test button that is on every earth fault breaker. When the test button is pressed, a fault current is simulated and the earth fault breaker must trigger.

Earth fault breaker 5SV3 4-pole

Earth fault breaker 5SV3 4-pole

Art. no.: 2167740

An earth fault breaker is used as a supplementary protection to prevent personal injury and fires caused by an electric overload through insulation errors, damage or unintentional contact. For personal protection, and earth fault breaker is used with 10 or 30 mA error current sensitivity and for fire protection, and earth fault breaker with max 300 mA error current sensitivity is used. Earth fault breaker type A can handle detecting both alternating current and pulsating direct current errors. Each earth fault breaker must have its own neutral base/neutral bar, and neutral must be separated from the protective conductor. Earth fault breaker is connected upstream of the group or electrical apparatus to be protected. The earth fault breaker’s must be checked frequently with the test button that is on every earth fault breaker. When the test button is pressed, a fault current is simulated and the earth fault breaker must trigger.

Earth fault breaker Acti9 2-pole

Schneider Electric

Earth fault breaker Acti9 2-pole

Art. no.: 2164925

The earth fault circuit breakers are of electromechanical type and work without external voltage sources. They come in 2P and 4P design, class A, with rated current 30mA and 300mA in:
- Standard design
- Asi which is short-term delayed 10mS and has elevated 3kA surge current resistance. They are even supplied with inner protection which makes them suitable for humid and aggressive environments. All can be equipped with help contact for indicating that the earth fault circuit breaker has tripped.

Earth fault breaker Acti9 4-pole

Schneider Electric

Earth fault breaker Acti9 4-pole

Art. no.: 2164952

The earth fault circuit breakers are of electromechanical type and work without external voltage sources. They come in 2P and 4P design, class A, with rated current 30mA and 300mA in:
- Standard design
- Asi which is short-term delayed 10mS and has elevated 3kA surge current resistance. They are even supplied with inner protection which makes them suitable for humid and aggressive environments. All can be equipped with help contact for indicating that the earth fault circuit breaker has tripped.

Earth fault breaker Acti9 4-pole

Earth fault breaker Asi Acti9

Schneider Electric

Earth fault breaker Asi Acti9

Art. no.: 2164975

The earth fault circuit breakers are of electromechanical type and work without external voltage sources. They come in 2P and 4P design, class A, with rated current 30mA and 300mA in:
- Standard design
- Asi which is short-term delayed 10mS and has elevated 3kA surge current resistance. They are even supplied with inner protection which makes them suitable for humid and aggressive environments. All can be equipped with help contact for indicating that the earth fault circuit breaker has tripped.

Earth fault breaker Asi Acti9

Earth fault breaker REDtest

Schneider Electric

Earth fault breaker REDtest

Art. no.: 2165160

With automatic test function

Earth fault breaker Resi9

Schneider Electric

Earth fault breaker Resi9

Art. no.: 2165089

Earth leakage circuit breaker for personal protection 30 mA A class

Earth fault breaker Resi9

Earth fault breaker Resi9

Earth fault breaker Resi9

Ground fault circuit interrupter GFP UL1053 A-SI

Schneider Electric

Ground fault circuit interrupter GFP UL1053 A-SI

Art. no.: 2165199

Multi9 is a series especially for OEM builders. Lots of accessories such as phase rails, auxiliary contacts, earth fault protection etc. make it a complete series.

Ground fault circuit interrupter GFP UL1053 A-SI

Earth fault breaker Acti9 4-pole type B

Schneider Electric

Earth fault breaker Acti9 4-pole type B

Art. no.: 2165204

B-Class earth fault breaker intended for installations that include frequency converter.

Ground fault circuit interrupter Acti9 2/4-pole type B-EV

Schneider Electric

Ground fault circuit interrupter Acti9 2/4-pole type B-EV

Art. no.: 2165228

Earth fault circuit breakers type B-EV are used in applications with car chargers as direct currents may occur. (EV = Electric Vehicle). Rated voltage 230V, 50Hz. Standard: IEC / EN 61008-2-1, IEC / EN 62423, IEC 61543, VDE 0664.

Ground fault circuit interrupter type RCCB GS, 2 and 4-pole, 6kA

Ground fault circuit interrupter type RCCB GS, 2 and 4-pole, 6kA

Art. no.: 2163315

Earth fault circuit breakers type RCCB GS are adapted for installation in homes to protect persons and equipment for fault currents at short-circuit currents up to 6kA. The zero is located to the left of the 4-pole earth fault circuit breakers. Earth fault circuit breaker 25A 2-pole 30mA 6kA

Ground fault circuit interrupter type RCCB GS, 2 and 4-pole, 6kA

Ground fault circuit interrupter type RCCB GS, 2 and 4-pole, 6kA

Ground fault circuit interrupter type RCCB GS, 2 and 4-pole, 10kA

Ground fault circuit interrupter type RCCB GS, 2 and 4-pole, 10kA

Art. no.: 2163321

Earth fault circuit breakers 10kA are adapted for installation in protecting persons and equipment for fault currents at short-circuit currents up to 10kA. On all GARO earth-fault circuit breakers, voltage supply can be performed on the upper or lower side and on all 2-pole earth-fault circuit breakers it is possible to connect neutral conductors on the right or left side. All earth fault circuit breakers are tested and approved by independent European test institutes.

Ground fault circuit interrupter type RCCB GS, 2 and 4-pole, 10kA

Ground fault circuit interrupter type RCCB GS, 2 and 4-pole, 10kA

Earth fault circuit breaker 4-pole 30mA type HI

Earth fault circuit breaker 4-pole 30mA type HI

Art. no.: 2163773

The earth-fault circuit breakers are of the electromechanical type. They are available in 2-pole and 4-pole versions type A + High immunity, protection against 8/20 wave (surge protection) and unwanted tripping, with rated fault current 30mA and 300mA. All can be provided with an auxiliary contact to indicate that the earth fault circuit breaker has tripped.

Earth fault circuit breaker 4-pole 30mA type B

Earth fault circuit breaker 4-pole 30mA type B

Art. no.: 2163831

The earth-fault circuit breakers are of the electromechanical type. They are available in 2 Pole and 4 Pole versions type B detects all types of fault currents; pure alternating current and smoothed, pulsating and pure direct current. Even mixed frequencies up to 1 MHz are detected and broken in the event of a fault in a reliable manner. With rated fault current 30mA and 300mA. All can be provided with an auxiliary contact to indicate that the earth fault circuit breaker has tripped.

Earth fault circuit breaker Resi9 type A 300mA

Schneider Electric

Earth fault circuit breaker Resi9 type A 300mA

Art. no.: 2165341

Earth fault circuit breaker in 4 pole design 40A for fire and system protection, 300 mA A class, rated voltage 400V AC

Earth fault circuit breaker Resi9 type A 300mA

Showing 27 of 27