Plafond luminaires and accessories

Ahlsell helps you find the right lighting and luminaires. Whether you work with installing interior or exterior lighting for public environments, industry, or private housing, we have the range for your needs and projects. Here you will find LEDs, downlights, emergency lighting, and accessories for easy installation. Smart lighting solutions from several major suppliers. Here you will find lighting fixtures in many different designs. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell store.

Ceiling luminaire aRound Slice
a-collection
Ceiling luminaire aRound Slice
Art. no.: 7507089
Ceiling luminaires with a modern design language for indoor installation. Available in two sizes where the smaller can be set in three power steps 24W-18W-10W (2400lm-1800lm-1000lm) and the larger in two steps 38W-29W (3800lm-2900lm). Both sizes can be adjusted between 3000K and 4000K. All adjustment takes place with dip switches on the luminaire before assembly. The smaller luminaire is available as on/off and with HF sensor and background light. The sensor fixture cannot be used to control additional fixtures. The sensor fixture does not work optimally in rooms with irregular ceiling height and is therefore not recommended for e.g. stairwells. The larger fixture is available as an on/off and Dali/PushDim version. Both sizes can be mounted directly to the ceiling, the smaller one can also be mounted over a ceiling box.
Ceiling luminaire aRound SliceCeiling luminaire aRound SliceCeiling luminaire aRound SliceCeiling luminaire aRound Slice
Plafond LED AVR400, Ensto
Ensto
Plafond LED AVR400, Ensto
Art. no.: 7501157
The light fixture is a classic, stylish ceiling and wall fixture. The frame and the cover made with durable polycarbonate.
For recessed or surface-mounting.
Available with motion detector, PIR, and Radar.
PIR: The light illuminates automatically when new movement is sensed within the detection range, and extinguishes after the set time, as long as movement is no longer detected.
Detection Area: 360°/135°, approx. 6m in diameter.
Adjustable twilight relay: 1 lux - permanently
Time: 1-30 min.
External load: 460VA. Max 4 master together.
PIR models with codes ending in 5DL: It is possible to set the base light turn off 1h after the last detected movement, if so desired. Further, you may also set the level of the base light in the fixture (5%/20%) and set the level of the PIR-controlled light (100%/80%) NOTE! 6-charger with more masters on the same ignition wire.
RADAR: The light illuminates automatically when new movement is sensed within the detection range, and extinguishes after the set time, as long as movement is no longer detected. Radar can react through glass and thin walls, not recommended for outdoor use.
Ceiling and wall fitting LED RS 16 Sensor, Steinel
Steinel
Ceiling and wall fitting LED RS 16 Sensor, Steinel
Art. no.: 7503031
RS 16 LED is a wall and ceiling light fitting that can be used in environment where you want a simpler sensor fitting. It is equipped with Steinel’s unique HF sensor, which reacts quick as lightning to all movements regardless of direction of movement and ambient temperature. The sensor detects through soft materials and in small spaces can therefore detect movements outside of the room if the room is smaller than the sensor’s surveillance area (3-8 m diameter). Adjustable twilight relay and persistence time provide maximal energy savings. Up to 10 RS 16 LEDs can be connected by cable in a group, which means that all light fittings in the group act as master.
Assembly: Roof and walls. Indoors. Mounting height for ceilings is 2.20 - 2.70 m. If mounted higher, the range of the motion detector will be shorter. Three mounting holes c/c 170 mm. Spacers for surface wires.
Version: White polycarbonate body. Opaque glass diffuser with thread attachment. Equipped with an active HF sensor, surveillance area Ø 3-8 m that detects people walking. Surveillance angle 360°, opening angle 160°. The sensor detects through thin materials such as wood, plaster and glass. Persistence time adjustable between 8 sec and 35 min. Twilight relay adjustable between 2 and 2000 lux.
Connection: Two entrance holes Ø12 mm with throttling nipples. Terminal 2 x 1.5 mm² (phase, neutral, igniter).
Ceiling and wall luminaire LED Athena II sensor
Westal
Ceiling and wall luminaire LED Athena II sensor
Art. no.: 7502812
Thin ceiling and wall ceiling made of polycarbonate with opal anti-glare protection, equipped with an LED unit. The luminaire is controlled with a built-in microwave sensor that can be set as needed using DIP switches on the driver. There, functions such as sensitivity, time for background light and whether the luminaire should light up when there is movement when it is light outside can be regulated IP44, IK10, Class II luminaire with quick connection terminal block and double knockouts for external cable and relay connection.

Master = The luminaire can be connected as a master, which means that it can control other luminaires. At maximum detection, the distance is approx. 6m. Can control Max 100W with master included. Several master luminaires can be installed in parallel, provided that the luminaires have the same group fuse and do not exceed 100W in total. Comes with quick connection terminal block and double knockouts for external cable and forwarding.

NÖD = With separate emergency light module with automatic self-test and status indication via green/red diode. In the event of a power failure, the luminaire lights up for 3 hours via battery. The battery can be easily replaced via quick contact during maintenance and is available as a spare part.
Ceiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensor
Ceiling and wall fitting LED Moon Pro, Hide-a-lite
Hide-a-lite
Ceiling and wall fitting LED Moon Pro, Hide-a-lite
Art. no.: 7502870
LED luminaire for mounting close to the ceiling or wall. High luminous flux and good efficiency that meets the market's toughest requirements and requires fewer luminaires per installation. IP44 and class II to fit in many indoor environments.
Easy-to-install luminaire with long service life.
Moon Pro: Comes complete with built-in phase-dimmable drive. Possibility of surface wiring.
Monn Pro S: Microwave sensor for presence control with dip switch for setting range, twilight level and time delay. Possibility of surface wiring.
Moon Pro SC RF: Microwave sensor for wireless communication (RF) between luminaires in stairwells and corridors. Adjustable base light level, range, time delay and standby time via dip switch. Possibility of surface wiring.
Ceiling and wall fitting LED Lumina Multi, Alento
Alento
Ceiling and wall fitting LED Lumina Multi, Alento
Art. no.: 7502933
Plafond with frame of powder-coated sheet steel and opal white acrylic cup. Cable connection via the top of the luminaire and 2 side holes 180 ° for connection. Connects to 1.5 mm² quick-connect terminal block. The luminaire can be used as a presence sensor on / off or as a constant base light 10% with full effect 100% in presence. It is also possible to set the luminaire manually to switch off completely after a certain time (30 sec-24 h). Via switches, it is also possible to set the effect on the luminaire to be able to adjust the luminous flux. The luminaire is delivered factory-set with a constant base light of 10% and goes up to 100% when moving, 3 minutes after the last registered movement it goes down again to 10% basic light. All settings are made easily via on / off switches.
Ceiling luminaire LED Athena II
Westal
Ceiling luminaire LED Athena II
Art. no.: 7504099
Thin roof and wall plastic luminaire made of polycarbonate with opal glare protection, equipped with LED unit in on/off, pir sensor or master design.

On/off dimmable with front edge dimmer.

PIR sensor with up to 6m detection surface. The sensor has adjustable holding time and sensitivity. The luminaire can be connected as a master, which allows it to control other luminaires.

Master is controlled with a built-in microwave sensor that can be canceled as needed using dip switches on the drive. The luminaire can be connected as a master, which allows it to control other luminaires. At the maximum detection, the distance is about 6m.

NÖD = with a separate emergency light module with automatic self -test and status indication via green/red diode. In case of voltage loss, the luminaire shines for 3h via battery. The battle diet can easily be replaced via quick contact during maintenance and is available as a spare part.
Ceiling luminaire LED Athena IICeiling luminaire LED Athena IICeiling luminaire LED Athena II
Ceiling LED AVR320 10W Dual White, Ensto
Ensto
Ceiling LED AVR320 10W Dual White, Ensto
Art. no.: 7504900
AVR320 is a stylish luminaire with many possibilities both in terms of technology and appearance. Special emphasis has been placed on making the luminaire easy to install. A bayonet solution with a patented center ring facilitates installation for both ceiling and wall mounting.
Ensto's luminaires with Dual White are equipped with a choice of 3000 K and 4000 K on one and the same luminaire.
PIR : The light comes on automatically when hot movement comes within the detection range and goes out after the set time, when movement is no longer noted.
Detection range: 360 ° / 135 °, approx. 6m in diameter.
Adjustable twilight relay: 1 lux - infinite
Time: 1-30 min.
External load: 460VA. Max 4 masts together.
RADAR : The light turns on automatically when all forms of movement come within the detection range and goes out after the set time, when movement is no longer noted.
Radar can react through glass and thin walls. Radar is not recommended outdoors.
Detection range: 360 ° approx. 6-8m in diameter / 45 ° up and down for wall mounting approx. 5-6m.
Adjustable twilight relay: 5 lux - infinite.
Time: 1-30 min
External load: 460VA. Max 5 masts together. My distance between radar 3.5m
BASIC LIGHT: 10%
Ceiling LED AVR320 10W Dual White, EnstoCeiling LED AVR320 10W Dual White, Ensto
Ceiling LED AVR320 14W Dual White, Ensto
Ensto
Ceiling LED AVR320 14W Dual White, Ensto
Art. no.: 7504920
AVR320 is a stylish luminaire with many possibilities both in terms of technology and appearance. Special emphasis has been placed on making the luminaire easy to install. A bayonet solution with a patented center ring facilitates installation for both ceiling and wall mounting.
Ensto's luminaires with Dual White are equipped with a choice of 3000 K and 4000 K on one and the same luminaire.
PIR: The light turns on automatically when hot movement comes within the detection range and goes out after the set time, when movement is no longer noted.
Detection range: 360 ° / 135 °, approx. 6m in diameter.
Adjustable twilight relay: 1 lux - infinite
Time: 1-30 min.
External load: 460VA. Max 4 masts together.
RADAR: The light turns on automatically when all forms of movement come within the detection area and goes out after the set time, when movement is no longer noted.
Radar can react through glass and thin walls. Radar is not recommended outdoors.
Detection range: 360 ° approx. 6-8m in diameter / 45 ° up and down for wall mounting approx. 5-6m.
Adjustable twilight relay: 5 lux - infinite.
Time: 1-30 min
External load: 460VA. Max 5 masts together. My distance between radar 3.5m
BASIC LIGHT: 10%
Ceiling LED AVR320 14W Dual White, Ensto
Showing 52 of 82