Ahlsell
Order lines: 0
Quick order
AhlsellProductsElectricPanels and fuses 20-24

Panels and fuses 20-24

20 Fuse material
21 Standard components
22 Gauge displays, fuse boards
23 Enclosed equipment
24 Temporary power, output posts, construction panels

Do you need fuses? Ahlsell helps you find installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. We offer products from several well-known suppliers. Here you will find wall sockets, cable ladders, and accessories for easy installations. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. All the installation material you need under one roof. A job well done begins with good materials. Explore our wide range of fuses, installation materials, and accessories here in the online store or visit your nearest Ahlsell shop.

Bygg din elcentral och strömställare med drag and drop-funktion med Schneider Electric eDesign
Residual current circuit breaker with overcurrent protection 4-pole type C, ADM, Hager
Hager
Residual current circuit breaker with overcurrent protection 4-pole type C, ADM, Hager
Art. no.: 2163676
An RCBO is an RCD with built-in over-current protection in an MCB, which saves space and makes things easier to see. An RCBO is an RCD with built-in over-current protection in an MCB. The RCBOs are of type A, for AC and pulsing DC residual current, and with the neutral on the right. Choose between B and C characteristics, 30 mA for protection against injury. Surge-proof, minimum temperature -25ºC and breaking capacity 6 kA
A new DIN rail bracket with an advanced attachment mechanism means you can easily disconnect products from the DIN rail.
A transparent protective cover for the marking areas on Hager’s new-generation modular components. To open and apply the marking strip, simply press the lower edge. The Semiolog marking program can be downloaded at Hager.se
RCDs with soft leads can be connected under the phase rail with screw connectors.
The phase rail is simply pressed into place; you need never re-tighten.
NOTE: Hager’s KDNxxx phase rail must be used.
Residual current circuit breaker with overcurrent protection 4-pole type C, ADM, HagerResidual current circuit breaker with overcurrent protection 4-pole type C, ADM, HagerResidual current circuit breaker with overcurrent protection 4-pole type C, ADM, HagerResidual current circuit breaker with overcurrent protection 4-pole type C, ADM, HagerResidual current circuit breaker with overcurrent protection 4-pole type C, ADM, Hager
Phase rails Acti9
Schneider Electric
Phase rails Acti9
Art. no.: 2112563
Used to simplify the interconnection of miniature circuit breakers on the inbound side. All phase rails are of so-called rod type. The miniature circuit breakers inC60N and inC60H is designed with double connection clamp, interconnection clamp is usually not required. Personal protection switch has denser pole division (9mm) than standard miniature circuit breakers, which is why special rails are used for them. They are of 3-phase type and are available in 12, 24 and 48 modules. For miniature circuit breaker of 18 mm between connections standard lengths 12 or 24 modules and 1 metre, in 1-4 pole version with area 10 or 16 mm2. For miniature circuit breakers with auxiliary or signal contact, special rails as below are available: 1 and 2 pole + auxiliary contact, 3 pole for 1 pole with auxiliary contact and for 3 pole with auxiliary contact and for 3 pole +N with auxiliary contact, all have 1 metre length.
Phase rails Acti9Phase rails Acti9Phase rails Acti9Phase rails Acti9Phase rails Acti9
+
7
Distribution block / Socket distributors EKB
Eldon Installation
Distribution block / Socket distributors EKB
Art. no.: 2251148
For copper and aluminium cable. Compact distribution block for spreading and distributing of both incoming and outgoing wires in distribution boxes, connection equipment, switchgear, etc. Each type of block can be connected to a larger incoming wire and can then be split to several outgoing wires with lower area. Both incoming and outgoing wires can be of Cu or Al. The distribution block saves installation time and material when building distributions and can, in many cases, replace a normal track system. The distribution block is intended for installation on a DIN rail and for screwing onto a mounting plate. 3-and 4-pole distributors can be made simply using several blocks of the same or different models.
Distribution block / Socket distributors EKBDistribution block / Socket distributors EKBDistribution block / Socket distributors EKB
High-power fuse “Swedish design" 24kV
Ifö Electric
High-power fuse “Swedish design" 24kV
Art. no.: 2059184
Sub-field fuses - Back-up fuses are designed for short disconnection times in the event of arc failure on the low voltage side of the distribution transformers.
The fuses are intended as current limiting / short-circuit protection, which will trigger all currents between its maximum breaking current Imax (I1) down to the Imin (I3) value.
The fuses correspond to the requirements of the older Swedish test standard 17A- "Swedish fusing" through:

• The switch-off time is adapted to the rated current of the fuse (safe disconnection at 0.1s)
• The rated current of the fuse corresponds to the requirements of being greater than 1.1 times the rated current of the transformer.
• The fuses meet the requirements for the connection currents according to 17A.

The fuses are also dimensioned to allow the transformers to run with 40% overload for 2 hours. The fuses are tested and approved in accordance with current test standard IEC 60282-1 and VDE 0670 T4.
Dimensionally, the fuses meet DIN 43625 and are designed for use both indoors and outdoors. The low effect losses in the fuses make them suitable for use in encased switchgear. In these applications where cooling is reduced, the effect loss of the fuse should be considered when selecting rated current of the fuse. The fuses are lead- and cadmium free and equipped with striking pin, type medium 80 N (Newton). The entire range extends to 12 kV from 6A-160A and for 24 kV from 4A-125A. the fuses have clear marking with technical data and E-number to avoid mistakes as well as reinforced marking around the entire fuse body of the striking pin position. This marking simplifies post-checking of the mounting direction to ensure the function of the striking pin. The striking pin is activated either by melted melting conductors or via built-in temperature sensors.
Showing 52 of 812