Order lines: 0

Ahlsell Products Electric Mains power supply equipment 06-0907 Wiring cabinets and accessories

07 Wiring cabinets and accessories

Accessories connectors

Bird protection

Insulating hose

Cable cabinets/street light cabinets/Post and ground cabinets

Accessories wiring cabinets

Accessories cable splice

Accessories cable terminations

Cable accessories other

Folding sleeves

Ahlsell helps you find power grid materials for all of your assignments. Here you will find cable cabinets and accessories for a safe and smooth professional installation. In your job, customers want work to finalize projects fast as the power supply is a vital part of our society. The electricity grid is like a train track, where we transport the necessary electricity to households and businesses that need it. You need different types of specialist grid materials for a safe and stable electricity grid. We offer products such as earthing & lightning protection, joint sleeves, street lighting cabinets, and other specialist equipment. In our wide range of products, you will find products from several major suppliers. You can explore our wide range of electricity grid materials and accessories in our online store or visit your nearest Ahlsell shop.

End cap 102L

TE Connectivity/Raychem

Art. no.: 0776410

Use:For sealing and protection of cable ends.
Standard:Raychem PPS 3011 and 3012.
Design:Made of polyolefin, with medium-thickness wall. The cap is internally coated with adhesive that melts and seals against the cable during shrinking. For paper cables, the caps can handle up to 0.05 mPa internal pressure over the temperature range -30°C to +70°C. For plastic cables, -40°C to +120°C.

Heat-shrink tubes, HIS-3

HellermannTyton

Heat-shrink tubes, HIS-3

Art. no.: 0777067

Electrical insulation for general use, colour coding, protection against corrosion and mechanical damage, etc.

HIS-3 is a shrink hose without adhesive, with a shrink ratio of 3:1, supplied in dispenser boxes.

Overhead line terminal FK

Overhead line terminal FK

Art. no.: 0702962

Use:When connecting cable with Cu lead, the greased cupalbleck must be laid around the lead before it is installed in the clamp. The connection to the cable’s leads is done with 3 Allen contact screws that are tightened with a torque spanner.

Bracket FKFB

Art. no.: 0702967

Use:For connecting the FK guiding clamp to a surge diverter.

Heat-shrink tubes, Tredux

HellermannTyton

Heat-shrink tubes, Tredux

Art. no.: 0777005

Heat-shrink tubing for general electrical insulation and mechanical protection of cables and lines.
TREDUX is a thin-walled, flexible heat-shrink tubing. The shrinking ratio is 3:1 and the duct is made of cross-bound polyethylene. The hoses are 1 metre.

Shielded connection Type C 630A

TE Connectivity/Raychem

Shielded connection Type C 630A

Art. no.: 0706783

For plastic-insulated cable. Shielded cable connection system angled connection 630 A. Integrated field control. Separate termination is not required. 3-joint kits contain material for party shielding (the branch can be placed in the ground). Up to 2000mm slack length. Socket for capacitive voltage measurement. Screw cable lugs included.

Gel KH100

HellermannTyton

Art. no.: 0752384

RELICON KH 100 is a transparent, removable, saltwater-resistant, flexible two-component gel packaged in a standard cartridge. It is specially adapted to be used for filling junction boxes in low-voltage applications located in humid environments or in the ground. After curing, RELICON KH 100 is characterized by excellent resistance to moisture and very good insulating properties as well as good chemical properties. Application: Electrical insulation and moisture protection for low voltage applications.

Cable joint 12kV, MXSU 1-wire

TE Connectivity/Raychem

Cable joint 12kV, MXSU 1-wire

Art. no.: 0716030

Use: For splicing Earth cable, 1-wire 12kV. PLEASE NOTE! The splices allow jacket testing.
Standard: CENELEC HD 629.1.S1, IEC 61238–1 (splice sleeve).
Design: Inner and outer sleeves are expanded so that they can be applied and then heat-shrunk. The lines are spliced with the supplied screw splicing casings, which include an integrated element in the screws, and which detach when the required torque is achieved. After cable preparation, fold a field-control cloth above the splicing sleeve and the tubes are shrunk in order to achieve field control and full insulation. The shield wires are spliced with supplied screw splice sleeves.
Set contents: The set contains equipment for 1 wire.

Cable joint 24kV, MXSU 3-wire

TE Connectivity/Raychem

Cable joint 24kV, MXSU 3-wire

Art. no.: 0716042

Use: For splicing Earth cable, 3-wires 24kV.
PLEASE NOTE! The joint allow jacket testing.
Standard: CENELEC HD 629.1.S1, IEC 61238–1 (joint sleeve).
Design: Inner and outer sleeves are expanded so that they can be applied and then heat-shrunk. The lines are spliced with the supplied screw splicing casings, which include an integrated element in the screws, and which detach when the required torque is achieved. After cable preparation, fold a field-control cloth above the splicing sleeve and the tubes are shrunk in order to achieve field control and full insulation. The shield wires are spliced with supplied screw joint sleeves.
Set contents: The 3-wire set contains equipment for 3 x phases.

Cold shrink kit EPDM 1kV, 4-conductor

Cold shrink kit EPDM 1kV, 4-conductor

Art. no.: 0714342

3M™ Cold Shrink Tubing are tubular sleeves with sealing mastic at each end. Once the insulation tubing is placed over a joint, simply pull on one end to unwind the core. Then the ends of the hose shrink together and form a water-resistant seal. Dimensioning of the core, the hose and the sealing mastic gives a wider area of use without the sealing and insulating properties of the EPDM rubber hose being impaired. The specially designed material's memory mechanism provides a permanent and lasting seal and insulation.

Cold shrink kit EPDM 1kV, 4-conductor

Cold shrink kit EPDM 1kV, 4-conductor

Key NK30 for triangle lock and EBR lock. With cover opener.

Key NK30 for triangle lock and EBR lock. With cover opener.

Art. no.: 1646810

Key for triangle lock and EBR lock with hatch opener.

Universal clamp UKRS 90

Universal clamp UKRS 90

Art. no.: 0702972

Use:For attachment of cables to posts. Contains 1 UKR 90 universal clamp and one UKS 90 spacer.

Universal clamp UKRA 200

Universal clamp UKRA 200

Art. no.: 0732500

Use:For attachment of cables to Ø 50-275 mm anchor rail.

Cable connection RSTI, angled, 12/24 kV

TE Connectivity/Raychem

Cable connection RSTI, angled, 12/24 kV

Art. no.: 0706770

Angled connection, 630A, for round plastic-insulated 1 wire cable for compact substations and transformers. For both indoors and outdoors. For parallel connection, a single connection and a CC parallel connection are used. Standard: CENELEC HD 629.1.

The Connection is made of fireproof silicon rubber with high creep resistance. The thick wall conductor cover on the insulation protects against accidental contact. Exterior tests can be done without disconnecting the shielded connector. The connection has outputs for capacitive voltage control.
Set contents: the kits are complete with screw cable shoes.
NOTE! Separate cable ends are not needed.
Single connection, 1-lead.

Hybrid joint 12kV, CSJH

Hybrid joint 12kV, CSJH

Art. no.: 0716231

Cable splice for round plastic insulated 3-conductor cable. Hybrid joint consisting of cold shrink body spread on spiral with integrated field control (geometric) and insulation for each conductor and outer hose of thick-walled heat shrink tubing for mechanical protection and moisture sealing. The joint is adapted to the supplied screw joint sleeves with break skull. Screw joint sleeve for screen included.

Cable cabinet NC350

Cable cabinet NC350

Art. no.: 0731197

Integrated ground foundation prepared for bottom plate mounting and for fixing VP pipes for heating cable mounting. Adjustable legs in both height and angle. The gables are provided with rivet nuts for attaching e.g. marker bar and accessory cabinet. Cable cabinet card holder. Embossing on the door adapted for labeling. Tested according to SS-EN 61439-5 and meets the requirements for Arctic climate. SE lock (EBR lock), CDC-LSE.

Cable cabinet NC350

Kabelskåp NC600

Kabelskåp NC600

Art. no.: 0731199

Integrated ground foundation prepared for bottom plate mounting and for fixing VP pipes for heating cable mounting. Adjustable legs in both height and angle. The gables are provided with rivet nuts for attaching e.g. marker bar and accessory cabinet. Cable cabinet card holder. Embossing on the door adapted for labeling. Tested according to SS-EN 61439-5 and meets the requirements for Arctic climate. SE lock (EBR lock), CDC-LSE.

Kabelskåp NC600

Heat-shrink tube LSTT

TE Connectivity/Raychem

Heat-shrink tube LSTT

Art. no.: 0776001

Thin-walled heat-shrink tubing made of Polyolefin on coil without glued coating. Shrinkage ratio 2:1. Low shrinkage temperature 80 ° c. Area of use – 40°C to + 105 °C. A = upon delivery. B = after full shrinking.

Heat-shrink tube LSTT

Heat-shrink tube MWTM

TE Connectivity/Raychem

Heat-shrink tube MWTM

Art. no.: 0706608

Heat shrink tubing for insulation is generally used for situations where there are requirements for good insulation together with mechanical protection. To protect against UV radiation on slacks at the low voltage end and corrosion protection. Included as part of the Raychems 1kV plastic and paper finishes.

Standard: Raychem PPS 3013 and 3012.

Design: Medium thickness wall. Halogen-free. Made of modified polyolefin with very high level of electrical, mechanical, weather and corrosion resistant properties. Continuous operating temperature-40°C to +120°C.
Length of 1000 mm, adhesive coated.

Casting resin GreenLine GG

Casting resin GreenLine GG

Art. no.: 0718572

Polyurethane resin for electrical insulation as well as mechanical support by casting e.g. cable joints.
Comes in Unipack package with resin and hardener in one and the same transparent bag, separated by a seam in the middle. When the seam is broken, it is possible to mix the two components together without opening the bag until the colour is homogeneous. Then the resin is ready for casting. Hardened casting resin is not affected by moisture.

Gel for joint sprayer, Wonder Gel

Gel for joint sprayer, Wonder Gel

Art. no.: 0752003

Single-component gel supplied ready-mixed in tube for easy and easy application using a joint sprayer. The viscoelastic gel does not contain any dangerous toxins, has no best before date and does not solidify, which makes it possible to open an existing joint. You keep track of how much gel is left in the tube and the working temperature is from -60 to + 200 ° C. Each tube contains 280 ml.

Cast resin bag size B, 200ml

Cast resin bag size B, 200ml

Art. no.: 0703315

3M ™ Scotchcast ™ Casting resin 4GS is a 2 component, epoxy basead and CMR-free casting resin for cable splicing, for installation up to 1kV. With a unique indication on the mix, the casting resin changes color after the 2-component mixture has been performed correctly. The casting resin is refined with a moisture in its curing process, and to facilitate dosing, they use the unique and innovative mix & dosing system that ensures a simple and contact-free dosing.

Cable cabinet CDC, Cabinet with assembly panel

Cable cabinet CDC, Cabinet with assembly panel

Art. no.: 0732122

CDCis supplied with rail system or with assembly panel. The cabinets have integrated, adjustable ground base plates that are prepared for installation of bottom plate. The gables are equipped with bracket for, e.g., snow-plough warning pole or accessory cabinet. The cover is equipped with a holder for cable cabinet card on the inside. The embossing on the cover is adapted for the most common labelling systems. Enclosure class IP34D.

Cable cabinet CDC, Cabinet with assembly panel

Cable cabinet CDC, Cabinet with assembly panel

Accessory cabinet CDCA

Accessory cabinet CDCA

Art. no.: 0732145

Accessory cabinet for installation on other enclosure. The cabinet is supplied with an assembly panel.
The gables are equipped with socket openings. The right-side opening has a revolver seal with five selectable openings. The seal can be moved to the left side.
The bottom of the cabinet has an opening with integrated tension relief for temporarily connected wires. The opening is covered by an included cover when it is not being used.
Inserts for temporary sockets, KSMU 16/32, or a meter board can be installed in the cabinet
MPF 25/63. When installing MPF 25/63, the CKM retrofit kit is required.

Ground cabinet CDCF 040

Ground cabinet CDCF 040

Art. no.: 5060777

Lock CDC-LTC, telecom lock. Integrated ground foundation prepared for bottom plate mounting and for fixing VP pipes for heating cable mounting. Adjustable legs in both height and angle. The gables are provided with rivet nuts to be able to secure e.g. marking rod. The door is fitted with a holder on the inside. Embossing on the door adapted for labeling. Tested according to SS-EN 61439-5 and meets the requirements for Arctic climate.

Cable joint 1kV

Cable joint 1kV

Art. no.: 0712210

Use: For splicing of 1kV plastic- and paper-insulated cable for 3-, 4-, and 5-lead and for transition between plastic- and paper-insulated cable as well as signal cable. Tolerates 10 m water depth.
Standard: SS 424 14 44, 1st edition, EBR KJ 24:89.
Design: The cable splice consists of an impact-resistant mould with flexible sealing rings between the mould and the cable. Casting resin and hardener are precisely measured in a two-chamber bag. SMARTA should not be installed at temperatures below –10°C.
When splicing paper-insulated cable, and at transitions between paper- and plastic-insulated cable, the PPC accessory set must be used.
When splicing plastic-insulated cable to paper-insulated cable, sleeves with intermediate walls must be used.

Gel, Fluid

Art. no.: 0718205

Use:For casting of electrical connections into semi-rigid boxes or similar. Protects against moisture and corrosion.
Standard: HD 623
Description: Gel of type Fluid is a transparent, removable silicone gel. The gel is supplied in a practical, moisture-proof two-chamber package. Both chambers are filled with precise doses of hardener, separated by an easily removable closing consisting of a rubber gasket in a U-shaped plastic profile.
Mixing is done in the unopened package. Setting time estimated at approx. 10 minutes at +18°C.
The gel can also be supplied in bottles with accompanying cup for measuring and mixing.

Cable end 1kV, LPH

Cable end 1kV, LPH

Art. no.: 0702012

Use:Outdoor termination for 1kV plastic-insulated earth cable, 3-, 4- or 5-lead, 2,5-95 mm².
Standard:Meets the requirements of SEN 24 14 34.
Design:The cable termination consists of a hood of weather-and oil-resistant rubber. The cable’s lead is bent downward and fixed in place with tape; then the hood is pushed on. The lead can be protected against UV radiation with a type IS insulating hose.

Fuse switch disconnector SLD 000

Fuse switch disconnector SLD 000

Art. no.: 0732747

Fuse load disconnector for fuses of type NH 000 or C00.
AC-23B in accordance with IEC 60947-3
1 module = 12.5 mm

Cable cabinet CDC, Cabinet with rail system, 400A

Cable cabinet CDC, Cabinet with rail system, 400A

Art. no.: 0732130

CDCis supplied with rail system or with assembly panel. The cabinets have integrated, adjustable ground base plates that are prepared for installation of bottom plate. The gables are equipped with bracket for, e.g., snow-plough warning pole or accessory cabinet. The cover is equipped with a holder for cable cabinet card on the inside. The embossing on the cover is adapted for the most common labelling systems. Enclosure class IP34D.

Cable cabinet CDC, Cabinet with rail system, 400A

Cable cabinet CDC, Cabinet with rail system, 400A

Cable cabinet CDC, Cabinet with rail system, 400A

Insulator cover HU

Insulator cover HU

Art. no.: 0702315

Use:For use as bird protection on the post transformer’s high-tension penetrations. To prevent short circuits caused by large birds, the HU is also placed on the surge diverters - in this case, HU should be combined with insulated down-conductors using the HUS insulation spiral.
On post insulators, HU is used in combination with two HUF wings, which protect the overhead line nearest the insulator from short-circuiting.
All parts are made of UV-resistant plastic.

Cable end indoors 12 kV PEX/Excel series

Cable end indoors 12 kV PEX/Excel series

Art. no.: 87004212

Cable terminal, various designs, see below.

Fuse switch disconnector SLD63 SLD 63

Fuse switch disconnector SLD63 SLD 63

Art. no.: 0732704

AC-21B in accordance with SS-EN 60947-3 at 400 A. Diazed fuses, DII or DIII. Can be sealed.

Cable cabinet K1/K3

Cable cabinet K1/K3

Art. no.: 81141501

Cable cupboard with 5 leaders.

PVC insulating hose transparent

PVC insulating hose transparent

Art. no.: 0768050

Hose made of PVC.

Heat-shrink tubes, Tredux HA47

HellermannTyton

Heat-shrink tubes, Tredux HA47

Art. no.: 0777032

Heat-shrink tubing for exposed conditions and for cable splices underground.
TREDUX HA47 is a thick-walled heat-shrink tubing with adhesive. The shrinking ratio is 3.5:1 and the tube is suitable for a variety of low-and medium-voltage applications. The hoses are 1 m and is supplied in boxes with lengths according to the table.

Heat-shrink tubes, Tredux MA47

HellermannTyton

Heat-shrink tubes, Tredux MA47

Art. no.: 0777022

Heat-shrink tubing and cable joints protection for the insulation and termination of the low-voltage applications.

TREDUX MA47 is a medium-walled heat-shrink tubing with adhesive. Shrinking ratio 4:1 and the tube is resistant to solvents, acids and alkaline solutions. The tubes are 1 metre, and delivered in boxes with lengths according to the table.

Heat-shrink tubes, TF31

HellermannTyton

Heat-shrink tubes, TF31

Art. no.: 0777242

Heat-shrink tubing for insulation and labelling of cabling and lines with accompanying components.
TF31 is a thin walled shrink tubing without glue. Shrinking ratio is 3:1.

Heat-shrink tubes, TF31

Heat-shrink tubes, ShrinKit 321 Basic

HellermannTyton

Heat-shrink tubes, ShrinKit 321 Basic

Art. no.: 0777170

Assortment box for an installer. Contains shrink tubes with a shrinking ratio 3:1. For applications that will cover sizes from 1 mm to 16 mm. The box contains black tubes in 5 different sizes of different length. A total of 220 pieces.

Heat-shrink tube WCSM

TE Connectivity/Raychem

Heat-shrink tube WCSM

Art. no.: 0776490

Crimping hose for insulation and mechanical protection. Insulating characteristics and flexible use make the hose ideal as insulation for cable splicing, a replacement jacket for damaged cables, and corrosion protection on metal-jacketed cables.

Standard: Raychem PPS 3013 and 3012.

Design: Thick wall. Halogen-free. Made of modified polyolefin. Excellent physical characteristics, durable and corrosion-resistant against acids. Used as an outer jacket in Raychem’s low- and high-tension cables. The adhesive melts when the hose is heat-shrunk, sealing the application. Continuous operating temperature-40°C to +120°C.
Length of 1000 mm, adhesive coated.

Contact protection KSHB 300

Contact protection KSHB 300

Art. no.: 0732645

Touch protection for the AD 300 or AD 2150 when the cable is disconnected.

Heat-shrink tube CGPT

TE Connectivity/Raychem

Heat-shrink tube CGPT

Art. no.: 0776108

Characteristics:Thin-walled shrink tubing without adhesive. Shrinkage ratio 2:1. Low shrinkage temperature 120°C. Temperature range: -40°C to + 135 °C. Standard colour: black.

Heat-shrink tube CGAT

TE Connectivity/Raychem

Heat-shrink tube CGAT

Art. no.: 0776091

Shrink tubing made of Polyolefin on coil with adhesive coating. For use where a moisture-proof dressing is required. Shrinking ratio 3:1.
Shrinkage temperature 125°C.
Temperature range: -30°C to +80 °C.
Black colour.
Supplied in single units of 1.2 m.
Heat tool for LPG, Sievermatic, see E 16 504 80.

Folding sleeve CRSM

TE Connectivity/Raychem

Folding sleeve CRSM

Art. no.: 0776450

Uses:For repair of plastic- or lead-jacketed cables, or as an outer jacket on cable splices.
Standard:SS 424 14 45. Raychem PPS 3013.
Design:Made of modified polyolefin with a semi-stiff medium-thick wall.
Set contents:Refolding sleeve, locking rails, and locking clips.
For plastic- or lead-jacketed cable

Folding sleeve CFSM

TE Connectivity/Raychem

Folding sleeve CFSM

Art. no.: 0776473

Uses:For repair of plastic- or lead-jacketed cables, or as an outer jacket on cable splices.
Standard:SS 424 14 45. Raychem PPS 3013.
Design:Glass fibre-reinforced design for strong mechanical protection. Coated with metal foil for radial water-tightness; not suitable where jacket testing is required.
Set contents:Refolding sleeve, locking rails, and locking clips.
With metal foil for radial water-tightness

Art. no.: 0702975

Use:To attach a cable to a post. The post distance permits unhindered climbing with pole-climbing shoes. Can be used in combination with an earthing plate.

Universal clamp UKR 90

Universal clamp UKR 90

Art. no.: 0702971

Use: For attachment of cables, lines, hoses, pipes, etc. Attaches round profiles with 20-90 mm diameter or angular profiles with 60-300 mm circumference.
Design: Strap holder of hot-galvanised sheet steel. Band of non-magnetic stainless steel, SS 2333-02, with rounded edges. Thickness 0.2 mm. Tensioning and locking of the band in one step. The locking axle is of press-cast zinc alloy.

Universal clamp UKRA 90, Cable device

Universal clamp UKRA 90, Cable device

Art. no.: 0732499

For attachment of cables of 20-90 mm diameter on anchor rails, e.g. in cable cabinets.

Universal clamp UKR 200

Universal clamp UKR 200

Art. no.: 0702981

For bundling of cables, Ø 50-275 mm.
Strap holder of hot-galvanised sheet steel. Band of non-magnetic stainless steel, SS 2333-02, with rounded edges. Thickness 0.2 mm. Tensioning and locking of the band in one step. The locking axle is of press-cast zinc alloy.

Earthing clamp UKJ

Earthing clamp UKJ

Art. no.: 0702973

Use:For earthing with UKS.

Accessory cabinet CDVA-BV

Accessory cabinet CDVA-BV

Art. no.: 0732146

Accessory cabinet developed for the Swedish Rail Administration. For installation on other enclosure. Empty cabinet with attachment for KSM 017 or KSM 417 insert. The gables are equipped with FL 13 flange opening and FL 21 at the bottom.
Locks with triangle lock. Four attachment angles for installation on the Swedish Rail Administration’s mounting brackets are included.

Mounting plate KSM 417

Mounting plate KSM 417

Art. no.: 0732233

Mounting plate with rail system 400A.

Showing 52 of 270