Order lines: 0

Ahlsell Products Electric Installation equipment 11-18 13 Motion, time, light controlLight regulation

Light regulation

Dimmer turn/push

Dimmer 1-10/Dali for lighting system

Dimmer standard

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Wireless knob WRT-01-S

Wireless knob WRT-01-S

Art. no.: 1377707

Wireless knob enables wireless control of one or more products from the Plejd range. Configurable in the Plejd app. The WRT-01 is easily mounted on the outside of a standard appliance box or with double-sided tape or screws. Estimated battery life: up to 15 years.
Radio: 2.4 GHz mesh, Bluetooth®, <10 dBm. Radio range: approx. 10 meters indoors. ATTENTION! The WRT-01 does not extend the range in Plejd mesh. Fits with frame from Schneider Exxact®.

Wireless knob WRT-01-S

Wireless knob WRT-01-S

LED Box universal dimmer, Schneider

Schneider Electric

LED Box universal dimmer, Schneider

Art. no.: 1360217

LED universal dimmer, 4-200W/VA For control of rear-edge-controlled LED lamp (RC) 4-100VA. Front-edge-controlled LED lamp (RL) 4-20VA. Incandescent lamp, (R) and most types of electronic (C)/ conventional transformers (L) 4-200W/VA, 230V halogen lamps 5-150W (R). Switchable operating mode for RL LED, adjustable minimum/maximum brightness, soft-start function. Screw connection, step-switchable. Neutral led not required.

Center plate dimmer ABB

Center plate dimmer ABB

Art. no.: 1360472

Center plate with knob for dimmer. Contains glow lamp. Fits all ABB dimmers.

Center plate dimmer ABB

Push dimmer digital

Push dimmer digital

Art. no.: 1377067

Pressure dimmer for DIN mounting, only 1 module wide, which allows for flexible mounting in standard casing. With multi-functions, EUD = Universal light adjustment. ESV = Same functions as EUD, but with turn-off delay as an accessory, this is adjustable to between 1-90 minutes if no manual Off-signal is given, dimming down speed of the switch delay after the delay time can be set to between 1-3 minutes.
MIN = Universal light adjustment, when a control signal is given, the dimmer is switched on for the set light strength, then it dims up for the set dimming time 1-99 minutes. MMX = Works like the “MIN" setting, but when the control current is disconnected, the lighting is dimmed down to the lowest level that has been set.
Then it is switched off. TLZ = circuit timer, with selectable off-switch warning through dimming down. Zero-setting of time and steady ON can be controlled from toggle switches. Adjustable time for turn-off. Turn-off warning is also adjustable. TI= pulse generator with adjustable time t from 0.1 to 9.9 seconds. ER = operating current relay function.
With the output enhancer LUD12-230V, the output can be increased to max 3400W/900W on the connections X1 and X2. Min/max light strength can be set. The dimmer speed can be adjusted, which simultaneously sets the speed for soft ON and soft OFF. Quick pressure command controls on and off, constant pressure commando raises or sinks the light strength.
A new press on the command signal changes the direction of the dimming. The current light strength is saved when turned off. Snooze function (only when controlled by the recoiling switch. With a double press, the light is dimmed down from the current light strength to the lowest light strength and is finally turned off. The current light strength as well as the minimum light strength (%)
determines the dimming down time (max. 60 min). With special functions for the nursery (only when controlled by the recoiling switch.

Push dimmer digital

Dimmer 370LED Plus

Dimmer 370LED Plus

Art. no.: 1363193

Rotary dimmer 370VA LED RC. Adjustable Min - Max. brightness. Push input for external push button. No zero is required, but for a more stable / low dimmer level, the zero can be connected. Mounting depth: 25mm. Plus

Dimmer 370LED Plus

Dimmer 370LED Plus

Dimmer puck 3-wire

Dimmer puck 3-wire

Art. no.: 1363242

Built-in dimmer, intended for optional installation between impulse switch and load. Small design makes it suitable for mounting in the box behind the impulse switch. Settings for minimum level, maximum level and for minimum start level. Adjustable dimmer technology between front edge RL and rear edge RC. Electronic short-circuit and automatic overload protection. Settings for minimum level, maximum level and for minimum start level. Adjustable dimmer technology between front edge RL and rear edge RC. Requires zero

Dimmer puck 3-wire

Transient protection EKO07244

Transient protection EKO07244

Art. no.: 1301602

Transient protection is mounted on inductive and capacitive loads to avoid interference pulses (transients) on the network. Can be used with advantage for small loads and loads with built-in electronics. The transient protection consists of a resistor and a capacitor in series. Supplied with insulated legs. Capacitance: 330 nF, tolerance +20%. Resistance: 47 Ohm, tolerance +30%. Working voltage: 630V DC, 250V AC. Temp. range: -40 - +75C. Dimensions: 29x43x11mm.

Dimmer RS 1-10LRE FV

Dimmer RS 1-10LRE FV

Art. no.: 1363140

With the electronic potentiometer insert, fluorescent tubes with electronic pre-connection device or electronic transformer with one 1-10 V interface can be turned on and off and be dimmed with a rotary switch.

Dimmer RS 1-10LRE FV

Rotary adapter Plejd for dose dimmer

Rotary adapter Plejd for dose dimmer

Art. no.: 1377736

Rotary adapter is clicked together with any puck from Plejd's range and then functions as a classic rotary dimmer. Through our wireless mesh technology, Vridadapter can also be used to control other products in the Plejd system.

The Plejd puck clicked together with the RTR-01 retains its functions as control inputs and set time functions, and can thus also be controlled from other buttons. You make the settings easily in the app.
Fits with frame from Schneider Exxact®.

Rotary adapter Plejd for dose dimmer

Rotary adapter Plejd for dose dimmer

Tyristor dimmer 1000W/VA, insert, Schneider Exxact

Schneider Electric

Tyristor dimmer 1000W/VA, insert, Schneider Exxact

Art. no.: 1370605

Rotary dimmer for regulation of incandescent bulbs, 230V halogen lamps (R) and most types of conventional and iron-core transformers (L), fluorescent tubes with suitable actuators and 1-phase motors. Turn-on and turn-off by pressing the dial, also outlet for unregulated load. Requires neutral conductor. Cannot be connected to a stair. It is also possible to change the centre plate to a transparent colour insert or brushed steel. For recessed IP20 mounting in an apparatus box c/c 60 mm or externally in surface-mounted box 35 mm. Can be upgraded to IP44, a sealing set is used for recessed mounting, and a surface-mounted box is used for external mounting in IP44.. Can be supplemented with any Exxact frame.

LED universaldimmer, Schneider Exxact

Schneider Electric

LED universaldimmer, Schneider Exxact

Art. no.: 1360113

Front (thyristor) or rear edge dimmer (transistor dimmer)
Universal dimmer automatically identifies connected load. It is not possible to mix inductive and capacitive loads.
For resistive/capacitive or resistive/inductive loads such as 230V halogen lamps, dimmable 230V LEDs, dimmable conventional or electronic transformers.
Can be supplemented with LED Nightlight using a kit consisting of white LED light mounted on the insert and a light guide mounted on the centre plate.
It is also possible to change the centre plate to a transparent colour insert or brushed steel.
For recessed IP20 mounting in an apparatus box c/c 60 mm or externally in surface-mounted box 35 mm.
Can be upgraded to IP44,sealing kit is used for recessed mounting and for external mounting
a surface-mounted box is used in IP44.Supplemented with optional Exxact frame.

Rotary adapter Plejd for dose dimmer Elko

Rotary adapter Plejd for dose dimmer Elko

Art. no.: 1377735

Rotary adapter is clicked together with any puck from Plejd's range and then functions as a classic rotary dimmer. Through our wireless mesh technology, Vridadapter can also be used to control other products in the Plejd system.

The Plejd puck clicked together with the RTR-01 retains its functions as control inputs and set time functions, and can thus also be controlled from other buttons. You make the settings easily in the app.
Fits with white frame from ELKO® RS/Plus.

Rotary adapter Plejd for dose dimmer Elko

Rotary adapter Plejd for dose dimmer Elko

Gateway Bluetooth Internet

Gateway Bluetooth Internet

Art. no.: 1377705

Gateway connects the user's Plejd mesh to the internet, enabling remote control of the Plejd system and activation of vacation mode. It also protects time functions in the event of power outages and enables integration with third-party services.
Connect the Gateway to the local network with the network cable and to a wall outlet with the power adapter. The product can be mounted on the wall with the included wall bracket.

Gateway Bluetooth Internet

Transistor dimmer 315/630W, insert, Schneider Exxact

Schneider Electric

Transistor dimmer 315/630W, insert, Schneider Exxact

Art. no.: 1370604

Turn knob dimmer for light control of incandescent lamps, 230V halogen lamps (R) and most types of electronic transformers (C). Turning on and off by pressing the knob. Possibility for stair reversal. Can be supplemented with LED Nightlight (not for 1000W) using a kit consisting of a white LED light mounted on the insert and a light guide mounted on the centre plate. Lights in the OFF position. It is also possible to change the centre plate to a transparent colour insert or brushed steel. For recessed IP20 mounting in an apparatus box c/c 60 mm or externally in surface-mounted box 35 mm. Can be upgraded to IP44, a sealing set is used for recessed mounting, and a surface-mounted box is used for external mounting in IP44.. Can be supplemented with any Exxact frame.

Dimmer 1-10V, Schneider Exxact

Schneider Electric

Dimmer 1-10V, Schneider Exxact

Art. no.: 1370612

Actuator 1-10V. Rotary potentiometer for control of the HF actuator. One-pole turn-on and turn-off via pressing the dial, max 6A.. There is the possibility to change the centre plate to transparent, for colour insets, or brushed steel. For recessed IP20 mounting in apparatus boxes c/c 60 mm or externally in surface-mounted boxes 35mm. Can be upgraded to IP44, a sealing set is used for recessed mounting, and a surface-mounted box is used for external mounting in IP44.. Can be supplemented with a suitable Exxact frame.

Transistor dimmer, insert, Trend

Schneider Electric

Transistor dimmer, insert, Trend

Art. no.: 1370640

Insert rotary dimmer for recessed IP20 mounting in apparatus box. For control of incandescent lamps and electronic transformers approved for light control. Push switch with step function. The insert will be supplemented with an optional frame E18 380 90-97, E18 381 90-97, E18 382 90-93.

Push button dimmer universal, EUD61M-UC

Push button dimmer universal, EUD61M-UC

Art. no.: 1377062

Dimmer for all loads with dimming capacity. Switch capacity up to 400W, with reservation for ventilation conditions. Controlled by a recoil button. Min. load 0W. The lowest light strength can be set, useful for e.g. dimmable low-energy lamps. Zero breakthrough and soft start save the light sources. The memory function and soft on/soft off can be shut off.

Bottom load resistance GLE, Eltako

Bottom load resistance GLE, Eltako

Art. no.: 1377055

Miscellaneous accessories for Eltako dimmer.

Push button dimmer universal without neutral, EUD61

Push button dimmer universal without neutral, EUD61

Art. no.: 1377052

Universal button dimmer without zero. Dimmer for all loads with dimming capacity. Switch capacity up to 400W, with a reservation for ventilation conditions. Controlled by a spring-loaded button or regular switch. Min. load 20W. The lowest light amount can be set. The dimmer speed can be adjusted with dim.speed, which simultaneously sets the speed for soft on and soft off. Zero breakthrough and soft start save the light sources

Push button dimmer universal, EUD16 NPN-UC

Push button dimmer universal, EUD16 NPN-UC

Art. no.: 1377065

Dimmer for all loads with dimming capacity. Switch capacity up to 400W, with a reservation for ventilation conditions. Controlled by a recoil button. Min. load 0W. The lowest light strength can be set, useful for e.g. dimmable low-energy lamps. The dimmer speed can be adjusted with dim.speed, which simultaneously sets the speed for soft on and soft off. Zero breakthrough and soft start save the light sources. With special comfort zones for dimmable 230V LED and low-energy light sources up to 100W. With nursery and snooze function

Power output amplifier DIN-assembled

Power output amplifier DIN-assembled

Art. no.: 1377070

Output MOSFET 400W. Only 0.1 watt power consumption in standby mode. Modular unit for rail mounting according to DIN-EN 60715 TH35. 1 module = 18mm wide, 58mm deep.
NOTE: Contactors for increasing the switch capacity shall not be connected in series to this kind of device. The output enhancer LUD12-230V can be connected to EUD12Z, EUD12D and SUD12/1-10V.. This results in an increase in the switch capacity on one wire with up to 400, 350 or 300W according to the drawing below, depending on the ventilation conditions. Alternatively with several lighting wires up to 400W/output enhancers. Only with extra lights for low-energy lamps (ESL) as 100W per light may not be exceeded.
Both switches’ functions can be done simultaneously for added output. Automatic detection of the load “Output enhancing on several lighting wires".
Control voltage 230V. Automatic electronic overload and temperature protection. When “Output enhancing on several lighting wires", the type of load that can be coupled in to the output enhancer LUD12-230V can differ from the one that the pressure dimmer controls. In this way it is possible to mix L- and C-loads.

Push dimmer UNI 0-400W DIN

Push dimmer UNI 0-400W DIN

Art. no.: 1377064

Universal dimmer. Power MOSFET, up to 400W. Automatic load-sensing. "Standby" consumption only 0.1 watt. You can set the lowest or highest sound level and the dimming rate. With nursery and sleep functions

Dimmer LED without N, 4-200W

Dimmer LED without N, 4-200W

Art. no.: 1377054

Power MOSFET, up to 200W. "Standby" consumption of only 0.5 watts. Adjustable for front or back dimming, memory function, ON/OFF, minimum light level, and dimming speed can be set.
Universal dimmer for R and C-loads up to 200W, due to ventilation, no L-loads may be dimmed (inductive loads such as conventional transformers).
Neutral passage switching, with soft “On" and soft “Off," to secure the load. Operating voltage 230V. Min. Load only 4 W.

Rotary dimmer for LED 200W

Rotary dimmer for LED 200W

Art. no.: 1377482

Dial dimmer for LED 200W, normal incandescent light and electronic transformer adjustable with setting for minimum level,

Rotary dimmer for LED 200W

Bluetooth dimmer for LED recessed, Vadsbo

Bluetooth dimmer for LED recessed, Vadsbo

Art. no.: 1360242

LED dimmer 0-200VA. For 230V LED, dimmable LED actuators, 230V halogen, normal incandescent light and electronic transformer. Controlled with push and / or app via bluetooth. Compact design for box. Built-in time management and astro function via app. Scenario features via app. Programmable switch via app. Group and sync multiple dimmers via the app. Easy updating of software in dimmer. 30m reach indoors between devices. MESH technology extends the reach. With mounting lugs and sturdy screw terminals.

Bluetooth dimmer for LED recessed, Vadsbo

Dimmer control with centre plate, Elko

Dimmer control with centre plate, Elko

Art. no.: 1363161

Spare parts for ElKO Plus dimmers in standard model, and for upgrading RS dimmers to Plus design, together with combination frame

Dimmer control with centre plate, Elko

Universal dimmer 300VA LED mesh BT

Universal dimmer 300VA LED mesh BT

Art. no.: 1377701

Universal dimmer with two separate inputs for control using a push button or motion sensor. The product can be controlled wirelessly via the app or through other products from Plejd. It can also be controlled automatically with built-in time functions such as astro/time schedule. DIM-01 has adjustable minimum, maximum, and starting levels and can withstand loads of up to 300 VA.

Crown dimmer for LED, Vadsbo

Crown dimmer for LED, Vadsbo

Art. no.: 1360340

Phase-controlled LED dimmer 1-100VAx2, with two separate channels/controlls, with minimum position setting for each individual channel for positioning in apparatus box with springs for the pushbutton function

Crown dimmer for LED, Vadsbo

Monteringsclips DIN/vägg

Monteringsclips DIN/vägg

Art. no.: 1377790

Mounting clips are used to attach any Plejd puck to a DIN rail or wall. When the MNT-01 is mounted, the puck is simply snapped into place.

Monteringsclips DIN/vägg

Controller 0/1-10V 16A mesh BT

Controller 0/1-10V 16A mesh BT

Art. no.: 1377702

Controller används som dosrelä/dosaktor för relästyrning upp till 16 A last och har nollgenomgångsdetektering/brytarskydd. Den kan också användas för styrning av tredjepartsprodukter med ingång för 0–10 V eller 1–10 V om LED-driftdon och HF-don.

CTR-01 har två separata ingångar för styrning med återfjädrande tryckknapp, strömställare eller rörelsevakt. Produkten kan styras trådlöst via appen eller genom andra produkter från Plejd. Den kan också styras automatiskt genom inbyggda tidsfunktioner som timer, astro-och veckour.

Controller 0/1-10V 16A mesh BT

Dimmer LED uni, Renova

Schneider Electric

Dimmer LED uni, Renova

Art. no.: 1360258

LED universal dimmer, 4-400W / VA rotary dimmer for light control. When adjusting the rear edge controlled LED lamp (RC) 4-200VA. Front edge controlled LED lamp (RL) 4-40VA. Incandescent lamps, 230V halogen lamps (R) and most types of electronic (C) / conventional transformers (L)

Dimmer LED uni, Renova

Batteribackup för klocka

Batteribackup för klocka

Art. no.: 1377732

Battery backup is connected with a clip function to any Plejd puck and is used to maintain time functions, such as astro clock, in the event of a power failure in the Plejd system. Only one BAT-01 is needed per Plejd system, provided the products have wireless range to each other. The BAT-01 is installed on a DIN rail or on a wall. Power reserve up to 10 years.

Batteribackup för klocka

Dimmer accessories, Schneider Exxact

Schneider Electric

Dimmer accessories, Schneider Exxact

Art. no.: 1370617

Centre plate for upgrading the area around the dinner wheel with a transparent front for colour insets.

Rotary dimmer for LED 200W

Rotary dimmer for LED 200W

Art. no.: 1360391

Dial dimmer for LED 200W, normal incandescent light and electronic transformer adjustable with setting for minimum level,

Rotary dimmer for LED 200W

Crown dimmer 2x100VA LED mesh BT

Crown dimmer 2x100VA LED mesh BT

Art. no.: 1377703

Crown dimmer is a two-channel universal dimmer with output for two different loads for control with spring-loaded push button or motion detector. The product can be controlled automatically through built-in time functions such as astro and weekly clocks, as well as wirelessly via the app or other products from Plejd. DIM-02 has adjustable minimum, maximum and start level and can handle loads of up to 100 VA per channel.

Crown dimmer 2x100VA LED mesh BT

Dimmer DIN STD 400 LED

Schneider Electric

Dimmer DIN STD 400 LED

Art. no.: 1360220

DIN dimmer with memory and soft start function. The dimmer is specially adapted for LED lamps. "The many useful functions, including a smooth memory function and a soft start function, give you and your customers practical benefits. No minimum load is required, which means that the dimmers are particularly well suited for controlling LED lights. Other light sources can also be dimmed without problems. In addition, the advanced version STD400LED + (CCTDD20017) has additional practical features, including a wake-up and snooze function, various lighting modes and a stair switching function "

LED dimmer 0-200VA without zero

LED dimmer 0-200VA without zero

Art. no.: 1360622

Universal pressure dimmer for LED, incandescent, halogen and electronic transformer. Functions for setting according to selected load. The dimmer fits in a box and can be used to control all LED luminaires and light sources. The LDn200 dims all the way down to 0W and has several knobs to set the minimum dimmer level, the highest dimmer level and a boost function for the slow-started LED light sources. The dimmer is robust and is equipped with self-restoring short-circuit protection and transient protection up to 2kV. The dimmer is less than 18mm thin and fits all types of switches and has double phase inputs for forwarding.

LED dimmer 0-200VA without zero

Dimmer control 316GLED RS with centre plate, Elko

Dimmer control 316GLED RS with centre plate, Elko

Art. no.: 1363165

Spare part kit consisting of dimmer knob and center part 56x56mm, excl. Lock nut in RS design combination frame

Cord dimmer 230V 0-50W

Cord dimmer 230V 0-50W

Art. no.: 1360624

Swedish-developed cord dimmer with knob and screw connection for dimming of LEDs, LED drivers and electronic transformers. Equipped with automatic restoration protection against overload, overheating and short circuit. For indoor use (IP20). Also handles 230V halogen and incandescent. With knob for setting brightness of min and max.

Cord dimmer 230V 0-50W

Cord dimmer 230V 0-50W

Dimmer aDim 350

Dimmer aDim 350

Art. no.: 1360711

Recessed rotary dimmer that is optimized for LED lighting but also works with a light bulb and halogen. The dimmer also has the option to adjustable min. Level. Center plate 56mmx56mm RAL 9016 included. Black dimmer knob and center plate (RAL9005) are available as accessories.

Dimmer knob and center plate Exxact

Schneider Electric

Dimmer knob and center plate Exxact

Art. no.: 1360454

Exxact dimmer knob and center plate incl. nut for rotary dimmer.

Dimmer knob and center plate Exxact

Dimmer knob and center plate Exxact

Dimmer knob and center plate Renova

Schneider Electric

Dimmer knob and center plate Renova

Art. no.: 1360457

Renova dimmer knob and center plate incl. nut for rotary dimmer.

Dimmer knob and center plate Renova

Crown relay 16A/2 mesh Bluetooth

Crown relay 16A/2 mesh Bluetooth

Art. no.: 1377706

Crown relay is used for breaking phase (L) to one or two separate loads, mainly for lighting. The product has two relay outputs with a total breaking capacity of up to 16 A (eg 10 + 6 A) and has zero-pass detection/breaker protection. REL-02 has two separate inputs for control with spring-loaded push button, switch or motion detector. The product can be controlled wirelessly via the app or other products from Plejd. It can also be controlled automatically through built-in time functions such as timer, astro and week clock.

Crown relay 16A/2 mesh Bluetooth

Mounting box

Art. no.: 1377791

Mounting box for contact-safe mounting of any Plejd puck on a wall, in a cabinet or spot hole. Has strain relief for secure cable connection.

Dose dimmer a-collection 0-150W

Dose dimmer a-collection 0-150W

Art. no.: 1360723

Dose dimmer, intended for optional installation between impulse switch and load. Requires zero. Settings for minimum level, maximum level and for lowest start level. Dimming time between min and max approx. 6s, soft extinguishing approx. 1s. Memory for last set value even in the event of a power failure. Suitable for many different types of loads, adjustable between front edge RL and rear edge RC. Electronic short-circuit and automatic overload protection.

Rotary dimmer 10-600W

Rotary dimmer 10-600W

Art. no.: 1377481

VD600 is a rotary dimmer with frame adapted to ELKO RS. VD600 is a highly efficient transistor dimmer specially adapted for LED lamps and LED ballasts (10-300 W) but also works well with 230 V incandescent light and halogen (35-500 W) and electronic transformers (35-600 W).
The dimmer is protected against overload, overheating and transients. VD600 has a stair function and installation takes place in a device box.

Rotary dimmer 10-600W

Wireless knob WRT-01-E

Wireless knob WRT-01-E

Art. no.: 1377708

Wireless knob enables wireless control of one or more products from the Plejd range. Configurable in the Plejd app. The WRT-01 is easily mounted on the outside of a standard appliance box or with double-sided tape or screws. Estimated battery life: up to 15 years. Radio: 2.4 GHz mesh, Bluetooth®, <10 dBm. Radio range: approx. 10 meters indoors. ATTENTION! The WRT-01 does not extend the range in Plejd mesh. Fits with frame from ELKO® RS/Plus.

Wireless knob WRT-01-E

Wireless knob WRT-01-E

Dimmerpuck Wiser Zigbee

Schneider Electric

Dimmerpuck Wiser Zigbee

Art. no.: 1360744

Dimmer puck that is placed in a box to enable dimming of lighting. Controlled by a spring-loaded power supply or via the app. Wiser dimmer puck LED with Zigbee control 200W/VA. Does not require zero. With the Wiser by SE app, various settings can be configured, for example creating scenarios to automatically control lighting based on the rising and setting of the sun. The dimmer puck can also be part of an "Away mode", where an automation switches the lighting on and off at specific times to simulate presence in the home. Communicates via Zigbee 3.0 and requires Wiser Gateway, art no: CCT501901 to be managed via the Wiser by SE app

Pushbutton wireless WPH-01-EW

Pushbutton wireless WPH-01-EW

Art. no.: 1377722

Wireless push button enables wireless control of one or more products from the Plejd range. Configurable in the Plejd app. WPH-01 is easily mounted on the outside of a standard device box or with double-sided tape or screws. Estimated battery life: up to 15 years or 200,000 clicks. Radio: 2.4 GHz mesh, Bluetooth®, <10 dBm. Radio range: approx. 10 meters indoors. ATTENTION! The WPH-01 does not extend the range in Plejd mesh. Fits with frame from ELKO® RS/Plus.

Pushbutton wireless WPH-01-EW

Pushbutton wireless WPH-01-EW

Pushbutton wireless WPH-01-SW

Pushbutton wireless WPH-01-SW

Art. no.: 1377721

Wireless push button enables wireless control of one or more products from the Plejd range. Configurable in the Plejd app. WPH-01 is easily mounted on the outside of a standard device box or with double-sided tape or screws.

Estimated battery life: up to 15 years or 200,000 clicks.
Radio: 2.4 GHz mesh, Bluetooth®, <10 dBm.
Radio range: approx. 10 meters indoors.
ATTENTION! The WPH-01 does not extend the range in Plejd mesh.
Fits with frame from Schneider Exxact®.

Pushbutton wireless WPH-01-SW

Pushbutton wireless WPH-01-SW

Relay 2-pole 16A/13A mesh Bluetooth

Relay 2-pole 16A/13A mesh Bluetooth

Art. no.: 1377709

Relay 2-pole has a relay with the possibility of 1- or 2-pole breaking. Breaking capacity up to 16 A at 1-pole, 13 A at 2-pole. REL-01-2P has two separate inputs for control with spring-loaded push button, switch or motion detector. The product can be controlled wirelessly via the app or other products from Plejd. It can also be controlled automatically through built-in time functions such as timer, astro and week clock.

Relay 2-pole 16A/13A mesh Bluetooth

Rotary adapter Plejd for dose dimmer Renova

Rotary adapter Plejd for dose dimmer Renova

Art. no.: 1377733

Rotary adapter is clicked together with any puck from Plejd's range and then functions as a classic rotary dimmer. Through our wireless mesh technology, Vridadapter can also be used to control other products in the Plejd system.

The Plejd puck clicked together with the RTR-01 retains its functions as control inputs and set time functions, and can thus also be controlled from other buttons. You make the settings easily in the app.
Fits with frame from Schneider Renova®.

Rotary adapter Plejd for dose dimmer Renova

Rotary adapter Plejd for dose dimmer Renova

Showing 52 of 86