Eltako
Push dimmer digitalArt. no.: 1377067
Pressure dimmer for DIN mounting, only 1 module wide, which allows for flexible mounting in standard casing. With multi-functions, EUD = Universal light adjustment. ESV = Same functions as EUD, but with turn-off delay as an accessory, this is adjustable to between 1-90 minutes if no manual Off-signal is given, dimming down speed of the switch delay after the delay time can be set to between 1-3 minutes.
MIN = Universal light adjustment, when a control signal is given, the dimmer is switched on for the set light strength, then it dims up for the set dimming time 1-99 minutes. MMX = Works like the “MIN" setting, but when the control current is disconnected, the lighting is dimmed down to the lowest level that has been set.
Then it is switched off. TLZ = circuit timer, with selectable off-switch warning through dimming down. Zero-setting of time and steady ON can be controlled from toggle switches. Adjustable time for turn-off. Turn-off warning is also adjustable. TI= pulse generator with adjustable time t from 0.1 to 9.9 seconds. ER = operating current relay function.
With the output enhancer LUD12-230V, the output can be increased to max 3400W/900W on the connections X1 and X2. Min/max light strength can be set. The dimmer speed can be adjusted, which simultaneously sets the speed for soft ON and soft OFF. Quick pressure command controls on and off, constant pressure commando raises or sinks the light strength.
A new press on the command signal changes the direction of the dimming. The current light strength is saved when turned off. Snooze function (only when controlled by the recoiling switch. With a double press, the light is dimmed down from the current light strength to the lowest light strength and is finally turned off. The current light strength as well as the minimum light strength (%)
determines the dimming down time (max. 60 min). With special functions for the nursery (only when controlled by the recoiling switch.
