Order lines: 0

Ahlsell Products ElectricAutomation 29-45

Automation 29-45

29 Terminals, labelling, ducts

31 Motor, safety switches

32 Contactors, starter devices

33 Motor controls, drive systems

37 Push buttons, signal lamps

38 Sensors, machine safety

Do you work with electrical service and automation in properties or workshops? Ahlsell helps you find the right products for you. Whether you work with commercial properties or private residences, we have the range for your needs. Here you will find contractors, buttons, sensors, safety switches, and accessories for easy installation. Learn more about our products here or visit your nearest Ahlsell store.

Products (1127)

Limit switch Series E100, Ersce

Limit switch Series E100, Ersce

Art. no.: 3810054

Ersce's limit switch meets the applicable standards for physical as well as a measure of NC contacts. Contact block is detachable which facilitates connection and service. Switches typically have contact function "100" = 1NO+1NC with torque.
Desired contact function, see also:
Type 01 = 1NO+1NC without torque.
Type 02 = 1NO+1NC overlapping without torque.
Type 03 = 2NO without torque.
Type 04 = 2NC without torque.
Type 05 = 2NC with torque.

Limit switch Series E100, Ersce

Limit switch Series E100, Ersce

Rail holder SH

Art. no.: 2920860

Fits rails 2920853-2920857.

Timer relay a-collection

Timer relay a-collection

Art. no.: 4098560

Function Op, operation delayed: Time calculation starts when the contact on the active input is closed. After the set time the relay switches on regardless of whether the contact on the active input is closed or open. If the contact is closed again after the time calculation has been switched off, the relay turns off and the time calculation starts again.
Function in, delayed disconnection: Time calculation starts and the relay opens when the contact on the active input is closed. After the set time the relay switches off regardless of whether the contact on the active input is closed or open. If the contact is closed again after the time calculation has been completed, the relay turns on and the time calculation starts again.
Function Dr, drop out delayed: The relay opens when the contact on the activation input is closed. When the contact is broken the time calculation starts. After the set time, the relay turns off. If the contact on the active input is closed while the time calculation is being made, the time calculation is reset while the relay is still turned on.
Flashing Function - Function R: (ON time first), (Function, Rb, OFF time first). When the control voltage is connected, the time starts to be calculated, when the period has expired the relay disengages. When the time for the disengaged relay has expired, the relay opens. This process continues as long as the control voltage is connected. The time for the rest and running time is equal. All relevant data, as well as the circuit diagram are clearly marked on the side of the relays.
Indication: 2 LEDs. Green lights up when the control voltage is connected. Yellow lights up when the relay is closed and flashes during the time calculation

Eden Dynamic Adam safety sensor

Eden Dynamic Adam safety sensor

Art. no.: 3830222

Adam DYN is a coded non-contact safety sensor for gates, gaps etc. A coded signal is required from the security module Vital or Security PLC Pluto. Adam DYN has M12- connector and has high enclosure class, IP69K. This makes it possible to use in extreme environments. The sensing distance between Adam and Eve is 0-15 mm ± 2 mm. Adam DYN info is a version with information output on pin 5.

Eden Dynamic Adam safety sensor

Dial selector for bottom and DIN-rail mounted switch

Dial selector for bottom and DIN-rail mounted switch

Art. no.: 3171316

OHB1 Directly mounted on the switch.

Dial selector for bottom and DIN-rail mounted switch

Dial selector for bottom and DIN-rail mounted switch

Cable ducting Segma PVC

Cable ducting Segma PVC

Art. no.: 2995234

For traditional cabling in control and distribution cabinets. Due to the cable duct’s cross-section and with the help of the custom SEGMA pliers, no saw is necessary to cut the cable duct.

Cable ducting Canalplast E/4, PVC

Cable ducting Canalplast E/4, PVC

Art. no.: 2999110

For all channels cover as standard. Approved in accordance with: CE, CEI 23-22, CSA, UL, R.I.N.A, RoHS

Cable ducting Canalplast E/4, PVC

Phase-marking tape woven-backing

Hammarprodukter

Phase-marking tape woven-backing

Art. no.: 2987656

Phase marking of tissue-borne tape

Phase-marking tape woven-backing

Phase-marking tape woven-backing

Phase-marking tape woven-backing

Phase-marking tape woven-backing

Phase-marking tape woven-backing

Feed through terminal block detachable type WT

Feed through terminal block detachable type WT

Art. no.: 2919624

“m. StB" has measuring sleeves WTR 2.5 and WTR 4 can be connected over with plug-in jumper cable from above.

Feed through terminal block detachable type WT

Feed through terminal block detachable type WT

Feed through terminal block detachable type WT

Feed through terminal block detachable type WT

Safety switch EMC plastic 3-pole OTE 16-90 A

Safety switch EMC plastic 3-pole OTE 16-90 A

Art. no.: 3140410

Standards SS4280605 and IEC947-3.
Cable entries M threaded knock-out openings. All switches are extensible with a fourth pole.
Enclosure IP65, IP20 when the lid is open.
Suitable for 4- and 5-conductor system.
Safety switch plate supplied as well by default.
Shielded cables are selected according to the static frequency changer manufacturer’s recommendations.

Safety switch EMC plastic 3-pole OTE 16-90 A

Safety switch EMC plastic 3-pole OTE 16-90 A

Safety switch EMC plastic 3-pole OTE 16-90 A

Safety switch EMC plastic 3-pole OTE 16-90 A

Switch zero with position 1-0-2

Switch zero with position 1-0-2

Art. no.: 3134821

Connection diagram A211

Switch zero with position 1-0-2

Switch zero with position 1-0-2

Switch zero with position 1-0-2

Rating plates Dekafix 6 FW 1-350

Rating plates Dekafix 6 FW 1-350

Art. no.: 2962701

Horizontal continuous text for clamping width 6 mm maps of 50 characters

Rating plates Dekafix 6 FW 1-350

Contactor LC1D, DC operated 9-38 A

Schneider Electric

Contactor LC1D, DC operated 9-38 A

Art. no.: 3233121

Direct current controlled. 1NO+1NC standard auxiliary contact. Open type. 3-pole.
Variant A with Everlink power connection.

Contactor LC1D, DC operated 9-38 A

Contactor LC1D, DC operated 9-38 A

Contactor LC1D, DC operated 9-38 A

Contactor LC1D, DC operated 9-38 A

Contactor LC1D, DC operated 9-38 A

Plug-in bridge, for terminals type UK, UIK, MTK, URTK

Phoenix Contact

Plug-in bridge, for terminals type UK, UIK, MTK, URTK

Art. no.: 2911567

(1st digit indicates number of poles, 2nd digit indicates terminal width). Bridge for the connection point. Color insulation: Grey.

Plug-in bridge, for terminals type UK, UIK, MTK, URTK

Plug-in bridge, for terminals type UK, UIK, MTK, URTK

Plug-in bridge, for terminals type UK, UIK, MTK, URTK

Receiver Sesam 800

Receiver Sesam 800

Art. no.: 3775310

There are three receiver models; one with and one without a LCD display window and a smaller receiver for mounting on a DIN rail. The receiver with the PCD display window makes it simple to remove or add new transmitters/users. It also has a removable memory card for business-critical systems where each receiver can be used together with a large number of transmitters. In the receiver, there is also the option to protect the installation with a four-digit PIN code, which means that only authorised people can unlock and use the functions. Installation and unlocking is simply done using the display windows keys.

Receiver Sesam 800

Inductive sensor IGT202

Inductive sensor IGT202

Art. no.: 9853147

Inductive sensors; M18 x 1 / L = 70 mm; Sensing distance 12 mm not built-in; conclusion; DC PNP / NPN; M12 Connection; IP 68; IP 69K; 2-conductor, 3-conductor; Ambient temperature 0 ... 100 ° C; Switching frequency 300 Hz

Oval profile PO

Art. no.: 1648212

Part-pipe marking profile, used for Partex Promark, T800/T1000 marking machines

Switch zero position 1-0-2

Switch zero position 1-0-2

Art. no.: 3134918

Connection diagram A210

Switch zero position 1-0-2

Switch zero position 1-0-2

Switch zero position 1-0-2

Switch zero position 1-0-2

Switch zero position 1-0-2

Interface relay RSL 6.2 mm

Schneider Electric

Interface relay RSL 6.2 mm

Art. no.: 4028549

Relay+base in slim model, width 6.2 mm.

Interface relay RSL 6.2 mm

Measurement/test terminal blocks Weidmüller

Measurement/test terminal blocks Weidmüller

Art. no.: 4279017

For the connection of measuring equipment with current transformers according to IBL 96 (SS 437 01 40)

Marking tape Nitto 21

Marking tape Nitto 21

Art. no.: 2987520

PVC labelling tape.
Used for labelling of leads and cables.

Key switchXB4BG 3 fixed positions

Schneider Electric

Key switchXB4BG 3 fixed positions

Art. no.: 3732634

Complete knob switches.
Front ring in metal Harmony.

Key switchXB4BG 3 fixed positions

Rotary switch short black ZB4BD

Schneider Electric

Rotary switch short black ZB4BD

Art. no.: 3732858

Actuator switch separate units. Front ring in metal Harmony.

Rotary switch short black ZB4BD

Rotary switch short black ZB4BD

Rotary switch short black ZB4BD

Rotary switch short black ZB4BD

Rotary switch short black ZB4BD

Interface relay type 3851 6.2 mm

Interface relay type 3851 6.2 mm

Art. no.: 4007400

Interface relay with interchangeable relay module for mounting on 35 mm DIN rail. Comes with 1 pc changeover contact 6 A, 250 V, light diode indication (LED) and transient protection. Low control power (DC 0, 170W) insulation voltage coil contact group 4000 VAC. Extremely high packing density as the width of the interface relay is 6.2 mm. CE approved.

Interface relay type 3851 6.2 mm

Level pilot NP632

Level pilot NP632

Art. no.: 3829201

NP 632 consists partly of a floating body with a shock-safe fixed micro-switch with switching contact function, and a freely suspended weight-loaded cable. The pilot body, cable, and weight are surrounded by a sheath of vulcanized Hypalon. The weight that is attached as vulcanized on the cable is to keep the float body submerged, then the liquid level rises up to and above the pilot. In this respect the weight functions as a sinker around which the floating body can oscillate. In the pump control the smallest connection difference is 130 mm with which only one pilot is required. For greater connection differences two pilots are required, one for the switching on and one for switching off. If several pumps are used, a single pilot can be mounted for switching off.

Push button box complete with emergency stop function.

Schneider Electric

Push button box complete with emergency stop function.

Art. no.: 3734734

With red mushroom knob ø 40 mm with turn reset. Light grey (RAL 7035) box and yellow (RAL 1012) lid.

Push button box complete with emergency stop function.

Push button box complete with emergency stop function.

Push button box complete with emergency stop function.

Industrial relay series G2RS 1-pole

Industrial relay series G2RS 1-pole

Art. no.: 4014730

The range consists of 1-pole relays with robust connection pins (4, 75 mm). By default equipped with both mechanical and colour-coded LED status display (AC coil red, DV coil green), nameplate for individual marking, and have clear coil labelling in the front. G2RS is also available with colour-coded test button that is both non-locking and locking and with gold plated contact for aggressive environment and small loads. Version with protection diode across the coil for 24VDC types (-SND..). G2RS mounted in sockets with screw connection or spring clip. With the combined locks and chute the relay is safely mounted at the same time as it is easy to disassemble. To facilitate block assembly there is an insulated transfer coupling rail for up to16 relays.

Sign plate holder ready-to-use incl.cable tie

Sign plate holder ready-to-use incl.cable tie

Art. no.: 2989410

CAB: Pre-cut holders for cable marking, 50 pieces, including 100 cable ties

Cable ducting ABB halogen-free

Cable ducting ABB halogen-free

Art. no.: 2999190

Of halogen free thermoplastic in accordance with VDE 0472, gives a stable structure with slots which allows easy and fast wiring. Self-extinguishing in accordance with UL94, V0. Compatible to European standard EN 50085-2-3. Delivered with cover. Supplied in lengths of 2 metres.
Ambient temperature: -40° to + 100°C
Colour: RAL 7035 Grey

Light diode XVL

Schneider Electric

Light diode XVL

Art. no.: 3742522

LED in various colours

Light diode XVL

Signal lamp Compact with integrated LED CL2-

Signal lamp Compact with integrated LED CL2-

Art. no.: 3705751

Improved version in environmentally friendly polymer. This is combined with improved protecting against current leakage and an extra long thread for mounting on strong panel sheet metal.

Signal lamp Compact with integrated LED CL2-

Signal lamp Compact with integrated LED CL2-

Signal lamp Compact with integrated LED CL2-

Timer relay Chronos 2 type M 17.5 mm

Timer relay Chronos 2 type M 17.5 mm

Art. no.: 4030014

Time relay for normal box. CE marked and EMC approved

Timer relay Chronos 2 type M 17.5 mm

Timer relay Chronos 2 type M 17.5 mm

Timer relay Chronos 2 type M 17.5 mm

Timer relay Chronos 2 type M 17.5 mm

Timer relay Chronos 2 type M 17.5 mm

Safety module/system Vital

Safety module/system Vital

Art. no.: 3858760

Application areas: Emergency stop, light curtain, non-touch sensor (EDEN), gate switches, light beam, hatch breaker, contact mat, contact list, all in the same security circuit.
Security module, Vital, only 22.5 mm wide, is the heart of a concept that means that in one and the same safety circuit one can easily install one or several different security components and still achieve safety category 4 according to EN 954-1. Vital is based on a dynamic single channel concept, unlike conventional 2-channel safety relays. Up to 30 dynamic transducers can be installed directly into the safety circuit that is monitored by just one Vital module. Mechanical sensors with connectors can also be linked in and get dynamic function with the help of adaptation unit Tina. Vital has automatic or manual monitored reset, two safety outputs and information output that is both used for recovery indication and for information to the PLC. Test input for monitoring of, for example, contactors, relays and motors can easily be connected up. The relay has removable terminal blocks.

Safety module/system Vital

Washing machine switch 3-pole 0-1 incl. red signal light 230V

Schneider Electric

Washing machine switch 3-pole 0-1 incl. red signal light 230V

Art. no.: 3157715

With nipples for two incoming connection wires and tension relief, lockable knob, screw connection, for recessed installation in device box c/c 60mm.
For IP 44 installation, supplement with sealing set 1820711.

“Plug-in" bridge - type for terminal blocks type. UT / ST / PT / DTI / QTC

Phoenix Contact

“Plug-in" bridge - type for terminal blocks type. UT / ST / PT / DTI / QTC

Art. no.: 2911257

The bridge can be cut to the correct number of poles and individual poles can be removed to achieve a jumping potential distribution. Color of insulated part: Red, Blue (BU), Gray (GY) 1st digit indicates number of poles, 2nd digit indicates terminal width. Example: FBS 3-5 = potential distribution between 3 terminals, terminal width 5.2 mm.

Terminal block ZSI 6

Terminal block ZSI 6

Art. no.: 2920084

Z-Series, Fuse terminal block, Marking area: 6 mm², Spring connection, black, Direct mounting

Terminal block ZSI 6

Distribution block ZVL

Distribution block ZVL

Art. no.: 2920631

Plinth Z series
A maintenance-free, vibration-proof connection: Stainless steel spring in the screwless connection option from Weidmüller.

Distribution block ZVL

Distribution block ZVL

Base system S7-1500 modular

Base system S7-1500 modular

Art. no.: 4500137

All CPUs have a corresponding Safety CPU, F-CPU. All CPUs have a built-in PROFINET interface (2-port switch). CPU 1516, 1517 and 1518 also have an interface for ethernet (PROFINET basic), e.g. to connect to a parent network, and the PROFIBUS interface (only the master, for the slave and expand your module is necessary). All CPUs are equipped with a display. One must specially order a SIMATIC memory card to all CPUs.

Industrial relay type 60

Industrial relay type 60

Art. no.: 4006033

11-pin plug-in version with 3 switching contacts. The relays have light emitting diode (LED) and/or mechanical indication. They are also equipped with push button for manual operation and can be locked in the on position by means of a clamp. Colour coded operation poles, orange for AC voltage and blue for DC voltage. The bases are mounted on 35 mm symmetrical DIN rail or with two screws (M3) on the mounting plate. The relays are CE approved.

Monitoring relay DIB

Monitoring relay DIB

Art. no.: 3864682

Monitoring current with a limit value (above / below), an output (SPDT). Adjustable hysteresis and time delay of potentiometer alarms. Mounting on DIN rail. Control voltage 115/230VAC

Switch zero position 1-0-2

Switch zero position 1-0-2

Art. no.: 3134824

Connection diagram A212

Switch zero position 1-0-2

Switch zero position 1-0-2

Expansion module LOGO 8

Art. no.: 4503226

LOGO! Expansion module, solves automation tasks in industrial and electrical installation with many features and a powerful memory replaces a variety of traditional electrical components. With analog inputs and outputs, it also replaces the functions normally carried out by PLCs. Logic module is user friendly and with expansion modules increases functionality. The latest generation of LOGO! You can connect to an Ethernet network and have multiple devices to interact.

Sealing membrane, protection, cover

Sealing membrane, protection, cover

Art. no.: 3707809

Accessories Compact series

Sealing membrane, protection, cover

Safety relay Sentry spring

Safety relay Sentry spring

Art. no.: 3861399

Safety relay with relay outputs and push-in connection.

Safety relay Sentry spring

Photo cell Osiris Compact 50 x 50 Universal Osiconcept

Photo cell Osiris Compact 50 x 50 Universal Osiconcept

Art. no.: 3847027

All detection methods are available with a single product. The first multi-application photocell that handles all five detection systems (direct/direct with mixing away background , reflex, polarised reflex, one-way detection). A simple push of the button and the photo-electric cell is automatically configured and offers optimal performance for each application. This unique system is called Osi concept. For one-way detection it must also include a transmitter.

Photo cell Osiris Compact 50 x 50 Universal Osiconcept

Front and back coupling 1-0-2

Front and back coupling 1-0-2

Art. no.: 3134865

Connection diagram A401 or A228.

HDC-KIT-HA, 4-pole, 250V, 10A, Size 1

HDC-KIT-HA, 4-pole, 250V, 10A, Size 1

Art. no.: 2938533

The kits contain

HDC-KIT-HA, 4-pole, 250V, 10A, Size 1

Limit switch Series E400, Ersce

Limit switch Series E400, Ersce

Art. no.: 3810118

Ersce's limit switch meets the applicable standards for physical as well as a measure of NC contacts. Contact block is detachable which facilitates connection and service. Switches typically have contact function "100" = 1NO+1NC with torque.

Desired contact function, see also:
Type 01 = 1NO+1NC without torque.
Type 02 = 1NO+1NC overlapping without torque.
Type 03 = 2NO without torque.
Type 04 = 2NC without torque.
Type 05 = 2NC with torque.

Limit switch head ZCE, all Osiconcept

Limit switch head ZCE, all Osiconcept

Art. no.: 3818173

Models in metal with nock and multidirectional main
Mounting in 15 degree steps.

Limit switch head ZCE, all Osiconcept

Limit switch head ZCE, all Osiconcept

Limit switch head ZCE, all Osiconcept

Safety switch plastic encased BAS 3-pole 16-25 A

Safety switch plastic encased BAS 3-pole 16-25 A

Art. no.: 3145284

The enclosures are manufactured of durable thermoplastic (PBT) with a light grey box and dark grey cover. (W = completely white). Switches that have M-threaded insert openings have them designed as “knock-outs". Supplied with lock nuts. BAS 25TP is equipped with an extra hole M16 downwards for a signal or auxiliary contact cable. Supplied with sealing nipples (IP54) in every switch. All switches except 16 W TP and 16 TP are equipped with an auxiliary contact. All can be supplemented with an extra auxiliary contact. The switches can be locked with padlocks in the O and I position after opening the “knock-out" knob. Locking strap L6 (31 458 70) can be used with up to six padlocks. Neutral terminal for 5-conductor system included.
Switches are halogen-free.

Safety switch plastic encased BAS 3-pole 16-25 A

Safety switch plastic encased BAS 3-pole 16-25 A

Safety switch plastic encased BAS 3-pole 16-25 A

Safety switch plastic encased BAS 3-pole 16-25 A

Frequency converter ACS580 IP21

Frequency converter ACS580 IP21

Art. no.: 3323781

ABBs standard frequency converter ACS580 for general machine applications in light industry and for building automation. Equipped with an interactive display that guides you to an optimal installation of your drive system.
All important accessories and functions are built-in as standard.
Available for currents of 380 – 480V, 50/60 Hz in the output range 0,75 – 250 kW.
Exemples of applications: Transport tracks, fans, punps, stirrers, and more.

Frequency converter ACS580 IP21

Capacitive sensor EC30

Capacitive sensor EC30

Art. no.: 3834440

2-conductor system, 20-250 VAC and 4-conductor system, 10-40 VDC
Capacitive sensors detect all materials (both conductive and non-conductive materials). Capacitive sensors have found an important application as level sensors. Then a line of sensors is put on, for example, a silo, a tank or other container with liquids or cereals. Detection of pellets is another very common application.
AC-sensor with 2-conductor systems is always connected in series with the load you wish to control. NO/NC selectable with switch.
DC-sensor with 4-conductor system is brown plus(+) and blue is minus(-). Black conductors are closing function (NO) and white conductors are breaking function (NC). Sheath of grey polyester. LED indication of the sensor's status. Activation distance adjustable with potentiometer on the sensor. Transient- and reverse polarity protection.
Sensor type: Cylindrical, Euro-norm I-shaped switching frequency:10 Hz (TBAPL), 500Hz (PPAPL) Mechanical dimensions: M30 x 1.5 x 50
Input voltage:20-250 VAC (TBAPL), 10-40VDC (PPAPL) load:max 10-500mA AC (TBAPL), max 200mA DC (PPAPL)
Ambient temperature:-25 to +70 C Protection class: IP67 Cable length: 2 m cable Patent: "Tripleshield"

Capacitive sensor EC30

‌
‌
‌
‌
‌
‌
‌
‌

Showing 52 of 1127