Order lines: 0

Ahlsell ProductsMounting

Mounting

Ahlsell is one of the largest distributors within fastening to the Swedish market. We have fastenings for all purposes – from small installations to nuclear power plants and smart storage solutions to help you keep order in place. We have a generous standard range for those who need fastenings for the construction job, industrial projects, installation assignments, or real estate projects.

Ahlsell's Fastening range consists of market-leading brands and partners. Ahlsell's own brand FIXX forms a large part of the range.

Products (992)

Expansion anchor s-ka zpl

Expansion anchor s-ka zpl

Art. no.: 279728

S-KA- Zinc-plated. European type approved, ETA 08/0173 Option 1- cracked and uncracked concrete.
S-KA through cut expander is a torque tightened expander for use in cracked and uncracked concrete. It can also be used for installation in homogeneous substrate as full brick (but max M8)) and natural stone. The expander is of even thickness and can therefore be installed directly through the component. It can be used indoors and in mostly dry areas.

1) Drill a hole according to the table in the mounting data below 2) Using a brush and blow pump, clean the hole 3) Push in the expander 4) Tighten the expander to the recommended torque.

I) Permitted loads, kN in concrete C20/25.
* Not covered by the ETA values recommended by the manufacturer.
Cross load values apply to attachment without concrete edge impact.

Hexagon screw M6S A4 stainless steel DIN 933 FIXX

Hexagon screw M6S A4 stainless steel DIN 933 FIXX

Art. no.: 748221

Metal Expander Fixx Sb

Metal Expander Fixx Sb

Art. no.: 1507648

Metal expander for strong attachment in slabs and hollow walls.
Metal expander with arms expanding on the back of the slab. The metal expander is suitable for heavy-duty mounting according to the material properties of the slab.
Suitable for board thickness of 5-45 mm, requires a cavity behind the board. Suitable for use where fire resistance is required. The component can be removed and re-installed by loosening the screw. Tighten the anchor with a screwdriver or a special mounting bar.
Supplied complete with fully threaded screw.

Expansion anchor s-kak zpl

Expansion anchor s-kak zpl

Art. no.: 233409

S-KAK- Hot-dip galvanised. European type approved, ETA 08/0173 Option 1- cracked and uncracked concrete.
S-KAK through-cut expander is a torque-tightened expander for use in cracked and uncracked concrete. It can also be used for installation in homogeneous substrate as full brick (but max M8)) and natural stone. The expander is of even thickness and can therefore be installed directly through the component. It is useful for installation in industrial and marine environments, where possible long-term corrosion is surrounded by rules and regular controls.

1) Drill a hole according to the table in the mounting data below 2) Using a brush and blow pump, clean the hole 3) Push in the expander 4) Tighten the expander to the recommended torque.

I) Permitted load kN in concrete C20/25. *Not covered by the ETA values recommended by the manufacturer.
Shear load values apply for an expander without the influence of a concrete edge.

Blind rivet kit 2005/K

Blind rivet kit 2005/K

Art. no.: 262476

EA2005/KIT Assortment box. Includes: Tool EA2005 and mandrel + nozzles for M3, M4, M5, M6. Steel rivet nuts M3-M6 with flat head.

Hexagons screw t6s a4

Hexagons screw t6s a4

Art. no.: 184616

“French" wood screw. Hex screw in accordance with DIN 571. Acid-proof A4.
Classic screw in A4 material in order to manage mounting in really demanding environments. Often used for installation in Iron plinths, post shoes and other wooden outdoor constructions. The shape of the screws means they are even suitable to use in plugs.

Tapping Screw Flange M6sf-tt

Tapping Screw Flange M6sf-tt

Art. no.: 119063

Self-tapping screw. TAPTITE hexagonal screw with flange, waxed.

Flange nut M6MF Ribbed zinc plated DIN 6923 FIXX

Flange nut M6MF Ribbed zinc plated DIN 6923 FIXX

Art. no.: 560355

M-thread. Hexnut nut with flange and locking teeth According to DIN 6923 (ISO 4161). Steel Class 8 galvanized. With locking teeth (ribbed)
Material certificates according to EN10204-3.1 can be downloaded on Ahlsell's website
To obtain your certificate, enter ahlsell's item number on the label on the packaging and batch number.

Through-bolt anchor S-KAK plus hot-dip galvanized

Through-bolt anchor S-KAK plus hot-dip galvanized

Art. no.: 71971398

Through-bolt anchor S-KAK plus hot-dip galvanized

Threaded rod zpl 4.6 din 976

Threaded rod zpl 4.6 din 976

Art. no.: 289034

M-thread. In accordance with DIN 976. Steel 4.6 bright galvanised. Deburred.

Threaded rod with cutting grooves bright galvanized

Threaded rod with cutting grooves bright galvanized

Art. no.: 3897079

Suspension rod, cuttable to the desired length. Available in M8 and M10. The rod is ribbed every centimeter to prevent damage to the thread during cutting. Electro-galvanized in quality 4.6.

THREADED ROD HGS 8.8 HDG

THREADED ROD HGS 8.8 HDG

Art. no.: 106473

M-thread. According to DIN 976. Steel 8.8 hot-zip galvanised.

THREADED ROD HGS 8.8 HDG

Blind rivets ejot ss

Blind rivets ejot ss

Art. no.: 301879

Stainless steel domed head and splint Type SS/SS rivet is a cold-cast blind rivet of standard type made entirely of stainless steel. It is highly corrosion-resistant in combination with high durability Th rivet is embedded in a drilled or punched hole,0,1-0,2 (min-max) mm greater than nominal rivet diameters.

Blind rivets ejot ss

Plug lyt lk rst collar

Plug lyt lk rst collar

Art. no.: 247709

LYT LK SP- Cylindrical collar, stainless nail. Time-saving, simple nail plug for light attachments.
European type approved, ETA 11/0487, approved for Uncracked concrete and Solid brick.

Ready to install light fittings in hard basic materials like concrete, brick and natural stone. LYT is a real "Quick plug" for push-through mounting. Just drill through the detail and hammer in until the plug is fully inserted. The plug itself is made of polyamide which provides the attachment with age-resistant grip in the substrate. The nail is made of hardened steel which is zinc-plated. The nail head has a pozidrive attachment in order that the nail can be removed. The plug collars act as insulating plastic washers, which prevents contact corrosion.

* Permitted loads in kN Tensile and Cross - uncracked concrete C20/25. Nrec = Values are recommended by the manufacturer. Nperm = in accordance with ETA-11/0487. ** Drill depth including assembly thickness.

Blind rivet nut rf a2 ftt

Blind rivet nut rf a2 ftt

Art. no.: 368387

Flat head with open end - type FTTA2. Aside from simple and fast application, Blindnit nut provides a strong nut thread in thin materials of stainless steel. The nut is installed blindly from one side with hand- or power tool,which makes it perfect for use in closed profiles, pipes etc. Hole dimensions in even metric dimensions simplify hole drilling.

Machine screw mrx 4.8

Machine screw mrx 4.8

Art. no.: 212557

M-thread, pozidrive (Z), phillips screw with a rounded head according to check according to DIN 7985 A ( ISO 7045 ). H = fully threaded.

Machine screw mrx 4.8

Exterior steel beam construction screw

Exterior steel beam construction screw

Art. no.: 500152

Nails hdg ring

Art. no.: 287095

Paslode’s Rounddrive ® nail has a fully round head. Associated number of gas cartridges are included in each package. Nail for Paslode IM90Ci, IM100Ci, IM90i, IM100i

framing nail PDPAWL Simpson

framing nail PDPAWL Simpson

Art. no.: 508126

Flange screw m6sf a2

Flange screw m6sf a2

Art. no.: 310788

M-thread. Hexagonal screw with flange in accordance with DIN 6921. H = fully threaded.

Flange nut m6mf a4

Flange nut m6mf a4

Art. no.: 308399

M-thread. Hexagon nut with flange with locking teeth (grooved) in accordance with DIN 6923 (ISO 4161). Acid-resistant A4.

Plastic screw TSE

Plastic screw TSE

Art. no.: 1545216

Made of hardened galvanised steel. With a bit and ST thread. For use in sheet metal max 2x1.5 mm. Equipped with a phillips head, Phillips No. 2. Extra wide head Ø11.2 mm.

Plastic screw TSE

Screw grabber

Art. no.: 504107

Area of application: Mounting board material on steel fastener (material thickness 1.5-2.0mm) and fixed plate on plate when a flathead is required. Other: Low-profile washer head. With drill tips.

Screw bsp utv-c3

Screw bsp utv-c3

Art. no.: 287056

Area of application: Mounting sheet material to wooden and steel joist foundations (goods thickness max. 2.5 mm) and fastening plate to plate, where a flat head is required. Other: Low-profile washer head. Main height 2.5 mm. 120° spiral drill tip.

Mounting screw drill bit painted FIXX

Mounting screw drill bit painted FIXX

Art. no.: 1531676

Area of application: Mounting sheet material to wooden and steel joist foundations (goods thickness max. 2.5 mm) and fastening plate to plate, where a flat head is required. Other: Low-profile washer head. Main height 2.5 mm. 120° spiral drill tip.

Mounting screw drill bit painted FIXX

Screw grabber gub outside

Screw grabber gub outside

Art. no.: 305027

Area of application: Mounting of board material on light beam.outer wall fastener. Other: Low-profile washer head. With drill tips.

Mounting screw stainless steel A2 FIXX

Mounting screw stainless steel A2 FIXX

Art. no.: 1531709

Area of application: Mounting sheet material to wooden and steel joist foundations (pre-drilled in steel) and fastening plate to plate, where a flat head is required. Other: Low-profile washer head. Main height 2.5 mm.

Mounting screw drill tip FIXX

Mounting screw drill tip FIXX

Art. no.: 1531664

Area of application: Mounting sheet material to wooden and steel joist foundations (goods thickness max. 2.5 mm) and fastening plate to plate, where a flat head is required. Other: Low-profile washer head. Main height 2.5 mm. 120° spiral drill tip.

Round washer RB A4 stainless steel DIN 125 FIXX

Round washer RB A4 stainless steel DIN 125 FIXX

Art. no.: 71318088

HEXNUT M6M A4 Din 934

HEXNUT M6M A4 Din 934

Art. no.: 3819963

M-thread. Hexagonal nut in accordance with DIN 934. Acid-resistant A4 Class 70 and 80.

Roundwasher sbrb

Roundwasher sbrb

Art. no.: 119153

Round washer for Steel building screw SB 8.8. Steel, HV 200 hot-dip galvanised.

Hexagon Nut M6M-8 Zinc Plated FIXX SB-Pack

Hexagon Nut M6M-8 Zinc Plated FIXX SB-Pack

Art. no.: 71318354

M-thread. Hexagon nut according to DIN 934 / ISO 4032. Steel Class 8 according to ISO 898-2

Roundwasher rbs

Roundwasher rbs

Art. no.: 361107

Round washer in accordance with ISO 7093 (DIN 9021). Steel HV200, hot-dip galvanised.

Steel construction tray SBRB hot dip galvanized, EN 14399

Steel construction tray SBRB hot dip galvanized, EN 14399

Art. no.: 419044

Round washer for Steel building screw SB 10.9 In accordance with EN 14399-6. Hot-dip galvanised HV 295-350.

Hexagon Bolt 8.8 HDG ISO 4017

Hexagon Bolt 8.8 HDG ISO 4017

Art. no.: 560204

Machine screw mrt a4

Machine screw mrt a4

Art. no.: 361170

M-thread. Hex hole screw (Torx) with rounded head according to DIN 7985 (ISO 14583).

Eye hook 5002 z

Eye hook 5002 z

Art. no.: 192872

Steel screw loop. Machine -threaded with nut. Length excl. loop.

Trapezoidal screw habo 115 z

Trapezoidal screw habo 115 z

Art. no.: 260295

Steel trapeze hook. Machine -threaded with nut.

Hexagon screw M6S 8.8 galvanized ISO 4017 FIXX

Hexagon screw M6S 8.8 galvanized ISO 4017 FIXX

Art. no.: 560157

M-thread. Hex screw according to ISO 4017 (DIN 933), fully threaded.
Material certificates according to EN10204-3.1 can be downloaded on Ahlsell's website https://www.ahlsell.se/tjanster/certifikat/
To obtain your certificate, enter ahlsell's item number on the label on the packaging and batch number.

Hexnut din 934

Art. no.: 178803

Metric fine-threaded. Hexagon nut in accordance with DIN 934. Steel Class 8.0 bright galvanised.

Hexagon nut M6M 8.0 HDG DIN 934

Hexagon nut M6M 8.0 HDG DIN 934

Art. no.: 389669

M-thread. Hexagonal nut in accordance with DIN 934.Steel Class 8.0 hot-dip galvanised.

Washer conical ksb

Washer conical ksb

Art. no.: 226265

Tapered retaining washer in accordance with DIN 6796. Spring steel mechanically galvanised yellow. HV 420-510.

Hexagonal screw M6S A2 stainless steel DIN 933

Hexagonal screw M6S A2 stainless steel DIN 933

Art. no.: 60314188

M-thread. Hexagonal screw in accordance with DIN 933, fully threaded.

Carriage Bolt Mvbf 4.6 Zpl Din 603

Carriage Bolt Mvbf 4.6 Zpl Din 603

Art. no.: 118993

M-thread. Square carriage bot in accordance with DIN 603. H = fully threaded.

Hex sock head screw mf6s a4

Hex sock head screw mf6s a4

Art. no.: 298318

M-thread. Hexagonal screw with countersunk head in accordance with DIN 7991. H=Fully threaded.

Hexagonal screw M6S A4 acid resistant DIN 931

Hexagonal screw M6S A4 acid resistant DIN 931

Art. no.: 104971

M-thread. Hexagonal screw in accordance with DIN 931, partially threaded.

Hexagon screw M6S 8.8 galvanized ISO 4014 FIXX

Hexagon screw M6S 8.8 galvanized ISO 4014 FIXX

Art. no.: 560110

M-thread. Hex screw according to ISO 4014 (DIN 931), partial threaded.
Material certificates according to EN10204-3.1 can be downloaded on Ahlsell's website https://www.ahlsell.se/tjanster/certifikat/
To obtain your certificate, enter ahlsell's item number on the label on the packaging and batch number.

Concrete screw multi-monti+

Concrete screw multi-monti+

Art. no.: 454992

MMS-SS- Hexagonal head with flange. European type approved, ETA 06/0078 Option 1.
Suitable for attachment of consoles and ceiling profiles etc. directly to the concrete without using an extra plate.
I) Permitted load kN in concrete C20/25. * Not covered by the ETA values recommended by the manufacturer. Values within ( ) can be used as recommendation of the manufacturer. Cross load values apply to concrete screws without concrete edge impact.

Concrete screw multi-monti+

Hexagons screw t6s

Hexagons screw t6s

Art. no.: 106323

“French" wood screw. Hex screw in accordance withDIN 571. Steel 4.6 hot-zip galvanised.
Classic screw for slightly heavier mounting outdoors. Often used for installation in Iron plinths, post shoes and other wooden outdoor constructions. The shape of the screws means they are even suitable to use in plugs.

Roundwasher brb hdg

Roundwasher brb hdg

Art. no.: 122214

Round washer in accordance with SS 70/SS3576 and ISO 7089. Steel HV200 hot-tip galvanised. The washer meets the requirements for screw joints in strength class C 8.8.

Roundwasher rb a2

Roundwasher rb a2

Art. no.: 133698

Round washer in accordance with DIN 125 A - HV140

Hexagon nut M6M A2 / 80 stainless steel DIN 934

Hexagon nut M6M A2 / 80 stainless steel DIN 934

Art. no.: 384730

M-thread. Hexagon nut according to DIN 934. Stainless A2/80

‌
‌
‌
‌
‌
‌
‌
‌

Showing 52 of 992