Order lines: 0

Ahlsell Products Heating and Sanitation Valves and measuring devicesValves

Valves

Wedge slide valves

Butterfly valves

Solenoid valves

Reducer / Overflow valve

Adjustment valves

Automatic valves

Rubber compensators

Backflow protection

Behöver du ventiler?
Vi på Ahlsell hjälper dig att hitta rätt produkt för just din applikation.
Oavsett om du arbetar med industriapplikationer eller VS-installationer har vi rätt produkt för just detta.
Vi erbjuder ett brett sortiment av produkter här på webben, men om det skulle vara så att du inte hittar det du söker
har vi både kompetenta säljare samt ett globalt leverantörsnät för att hjälpa dig att hitta rätt produkt.

Ball Valve AVI 1398, a-collection

Ball Valve AVI 1398, a-collection

Art. no.: 4508342

2-part stainless steel ball valve, internally threaded, with spring-loaded lockable handle and full throughput. The valves are silicone-free. TA-luft approved, CE/PED 97/23/EC Category III, Module H ValvesDN32-DN80 are marked CE0035.

Ball Valve AVI 1398, a-collection

Ball Valve AVI 1398, a-collection

Ball Valve AVI 1398, a-collection

Ball Valve AVI 1398, a-collection

Ball Valve AVI 1398, a-collection

Butterfly valve AVI 1484 NBR LUG, a-collection

Butterfly valve AVI 1484 NBR LUG, a-collection

Art. no.: 4017399

Soft-sealing butterfly valve AVI 1484 with replaceable NBR lining, LUG with threaded connection. High neck for insulation and lockable handle. ISO 5211 top flange for direct mounting of gear or actuator

Butterfly valve AVI 1484 NBR LUG, a-collection

Solenoid Valve Type 6213, Bürkert

Solenoid Valve Type 6213, Bürkert

Art. no.: 5410133

The Burkert valve 6213 EV is a servo-controlled solenoid valve. The spring connection of the diaphragm to the magnetic core helps the opening of the valve. As standard, the valve is suitable for use in liquids. For full opening of the valve, a minimum differential pressure is required. For gas and vacuum use, there is a special variant (HP00), which opens the valve without differential pressure. Depending on the application, different diaphragm materials are available. Valve bodies are available in brass, stainless steel and redware. For additional needs, lead-free or dezincification-resistant brass grades are available. Optionally, coils with integrated "Kick and Drop" (KD) electronics for to lower the power consumption during operation.In combination with a cable head according to DIN EN 175301-803 form A, the valves meet the protection class IP65.
- Servo-controlled diaphragm valve up to DN 40 G2"
- Spring-loaded membrane opens with low differential pressures
- Soft closing
- High flow with compact construction.
Industry valve.

Solenoid Valve Type 6213, Bürkert

Solenoid Valve Type 6213, Bürkert

Float valve VYC, AVi 2240, a-collection

Float valve VYC, AVi 2240, a-collection

Art. no.: 5080810

Float valve of stainless steel. The float valve is used to control the levels in tanks and cisterns.
Please note that valve housings and floats are ordered on separate part numbers. For dimensioning the float valve and float, see sheet 11:10.

Float valve VYC, AVi 2240, a-collection

Dirt filter AVi 1760, a-collection

Dirt filter AVi 1760, a-collection

Art. no.: 5064243

Flanged dirt filter in cast iron, with stainless steel strainer kit, with differential pressure gauge socket.
For mechanical cleaning of heating water, hot water, cooling water and fluids that do not attack in the valve including material.
Construction length according to EN558-1/DIN3202 F1.
Flange dimensions according to EN1092-2 PN10/PN16.

Dirt filter AVi 1760, a-collection

Dirt filter AVi 1760, a-collection

Dirt filter AVi 1760, a-collection

Dirt filter AVi 1760, a-collection

Dirt filter AVi 1760, a-collection

Vacuum valve, ESBE

Vacuum valve, ESBE

Art. no.: 5021000

Vacuum valve intended as an anti-back siphonage device for, e.g. water heater. Mounted horizontally or vertically.

Vacuum valve, ESBE

Slide gate valve WB14 PN10, Stafsjö

Slide gate valve WB14 PN10, Stafsjö

Art. no.: 4400790

Seals on both sides, suitable for fluids, sludge, and liquids with solid particles, such as sewage and biomass. Wheel control.

Ball Valve Avi 1383, a-collection

Ball Valve Avi 1383, a-collection

Art. no.: 4502026

For heating/cooling systems, diesel, glycol, neutral fluids, and other materials that will not attack in the valve input material. In low-lead brass CW617N, and full throughflow.

Ball Valve Avi 1383, a-collection

Ball Valve Avi 1383, a-collection

Ball Valve Avi 1383, a-collection

Ball Valve Avi 1383, a-collection

Butterfly valve AVI 1484 NBR Wafer, a-collection

Butterfly valve AVI 1484 NBR Wafer, a-collection

Art. no.: 4017385

Soft-sealing butterfly valve AVI 1484 with replaceable NBR lining, Wafer model for tightening between flanges. High neck for insulation and lockable handle. ISO 5211 top flange for direct mounting of gear or actuator

Butterfly valve AVI 1484 NBR Wafer, a-collection

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Art. no.: 4505808V

For heating/cooling systems, diesel, glycol, neutral fluids, and other materials that will not attack in the valve input material. In low-lead brass CW617N, and full throughflow.

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Ball Valve Avi 1329, a-collection

Pneumatic Actuator Double Acting AVi 2300, a-collection

Pneumatic Actuator Double Acting AVi 2300, a-collection

Art. no.: 4659484

Double-acting pneumatic actuator, connections according to ISO 5211/DIN 3337 for valve fitting.
Solenoid valve interface, the upper part of the shaft top and top bore, for mounting accessories complying with the standard VDI/VDE-3845, NAMUR.

Pneumatic Actuator Double Acting AVi 2300, a-collection

Pneumatic Actuator Double Acting AVi 2300, a-collection

Pneumatic Actuator Double Acting AVi 2300, a-collection

Pneumatic Actuator Double Acting AVi 2300, a-collection

Pneumatic Actuator Double Acting AVi 2300, a-collection

Solenoid Valve EV220BW, NO, Danfoss

Solenoid Valve EV220BW, NO, Danfoss

Art. no.: 4894248

Danfoss solenoid valve EV220BW 15B, DN 15, electrolessly open NO, EPDM diaphragm. Valve body in eco-brass. Drinking water approved DWGW 4MS KTW and W270, RiSE certified. Media temp 0 - 90 ° C. Pressure min 30 kPa, max 1000 kPa.
Industrial Valve.

Solenoid Valve EV220BW, NO, Danfoss

Solenoid Valve EV220BW, NO, Danfoss

Ventilation Valve Taco-Hy-Vent

Ventilation Valve Taco-Hy-Vent

Art. no.: 4842126

Float-controlled, completely in metal, with brass shut-off valve.

Full-Bore Ball Valve Vatette in dezincification-resistant brass

Full-Bore Ball Valve Vatette in dezincification-resistant brass

Art. no.: 8547075

With clamp ring coupling.

Handle for LKB - butterfly valve

Handle for LKB - butterfly valve

Art. no.: 19080780

Water damage breaker CubicSecure, LK

Water damage breaker CubicSecure, LK

Art. no.: 1882667

LK CubicSecure measures your water flow in real time and detects water leaks immediately. The water safety unit protects your home from damage caused by drip leakage and broken water pipes. The compact design makes LK CubicSecure easy to install and fits in cabinets.
LK CubicSecure works completely on its own and does not need any connection to the internet. If, on the other hand, you want to receive notifications about alarms and the opportunity to see your individual water consumption, the product needs to be connected to Wi-Fi. When the device is connected, you can control LK CubicSecure remotely through LK's App.
LK CubicSecure is developed and manufactured in Sweden with advanced technology for water measurement.

Ball Valve AVI 1326, a-collection

Ball Valve AVI 1326, a-collection

Art. no.: 4510227

For tap water, heating/cooling system, diesel, glycol, neutral fluids, and other materials that will not attack in the valve input material. In low-lead brass CW511L, and full throughflow.

Ball Valve AVI 1326, a-collection

Ball Valve AVI 1326, a-collection

Ball Valve AVI 1326, a-collection

Ball Valve AVI 1326, a-collection

Ball Valve AVI 1326, a-collection

Acid-Resistant Stainless Steel Needle Valves. Internal Thread, SS 2348

Acid-Resistant Stainless Steel Needle Valves. Internal Thread, SS 2348

Art. no.: 4620233

Max operating pressure 40 MPa at 20°C, 16 MPa at 125°C, 12.5 MPa at 200°C and 2 MPa at 300°C.

Ball Valve AVI 1395, a-collection

Ball Valve AVI 1395, a-collection

Art. no.: 4501840V

With full through-flow and lever, internal thread. Long build length and of brass CW617N, for heating and cooling.

Lever for ball valves heating, a-collection

Lever for ball valves heating, a-collection

Art. no.: 5197215

Butterfly valve AVI 1482 PTFE LUG, a-collection

Butterfly valve AVI 1482 PTFE LUG, a-collection

Art. no.: 4659546

PTFE-lined butterfly valve for mounting between flanges. Mounting flange ISO 5211 for mounting gear or actuator. 2-part epoxy-coated valve housing
Construction length according to EN 558-1
FDA food-service approved PTFE lining

Solenoid Valve Asco Series 238, servo-operated, 24 volt, OEM Automatic AB

OEM Automatic AB

Solenoid Valve Asco Series 238, servo-operated, 24 volt, OEM Automatic AB

Art. no.: 4528067

Servo-controlled 2/2-position solenoid valve for open systems. Withstands water, air and oil.

Solenoid Valve Asco Series 238, servo-operated, 24 volt, OEM Automatic AB

Solenoid Valve Asco Namur Series 551 for pneumatic actuators

Solenoid Valve Asco Namur Series 551 for pneumatic actuators

Art. no.: 4528248

Valve in accordance with NAMUR standard with multi-function 3/2-5/2 positions for mounting on double-action or single-action pneumatic control devices. Housing made of aluminium with venting via the standard ports. Control pressure, min 2 bar, max 10 bar. Int. thread. IP 65. Is fitted to pneumatic control devices, complete with hose coupling 6/4 and reduction check valve.
Operating pressure bar: 2-10

Rubber compensator PA855, PA Valves

Rubber compensator PA855, PA Valves

Art. no.: 5019040

Compensator in NBR rubber reinforced with Nylon reinforcement, rotatable hot-dip galvanized flanges. Working temperature -20°C - +110°C.

Coupling pipe for expansion vessel DN20

Coupling pipe for expansion vessel DN20

Art. no.: 5029008

Collection pipe with wall bracket. For expansion tanks, 8-25 litres.

Luminaire set AVI 1897-S

Luminaire set AVI 1897-S

Art. no.: 5029006

Safety kit with wall bracket and safety valve, pressure gauge 0-6bar and vent valve, quick connection to vessel with non-return valve.
Safety valve G20" internal thread on exhaust.
Max glycol mixture 50%

Luminaire set AVI 1897-S

Ball Valve AVI 1305, a-collection

Ball Valve AVI 1305, a-collection

Art. no.: 4507720

3-way stainless steel ball valve, int. thread. Full throughflow, floating homogeneous ball, and antistatic spindle, TFM1600 ball seat sealing and locking handle. Installation flange ISO 5211 for direct installation of actuator. CE/PED 97/23/EC Category III, Module H. Valves DN32-DN50 are marked CE0035. ISO 15848-1.

Safety valve Prescor DN 25 for heating and cooling applications

Safety valve Prescor DN 25 for heating and cooling applications

Art. no.: 5532031

Manufactured in accordance with Pressure Equipment Directive 97/23/EC, Category IV, Modules B + D.
Brass housing with EPDM membrane.

Safety valve Prescor DN 25 for heating and cooling applications

Safety valve Prescor DN 25 for heating and cooling applications

Safety valve Prescor DN 25 for heating and cooling applications

Safety valve Prescor DN 25 for heating and cooling applications

Safety valve Prescor DN 25 for heating and cooling applications

Ball Valve AVI 1309 Compact, ISO 5211, a-collection

Ball Valve AVI 1309 Compact, ISO 5211, a-collection

Art. no.: 5493259

Compact ball valve with floating homogeneous ball, full throughput and blow-out proof stem, lockable handle and ISO 5211 top flange for direct actuator mounting. The valve housing has threaded bolt holes for mounting between flanges or as an end valve. CE/PED 97/23/EC Category III, Module H Valves DN40-DN100 are marked CE 0035, ISO 15848-1 approved.

Ball Valve AVI 1309 Compact, ISO 5211, a-collection

Ball Valve AVI 1309 Compact, ISO 5211, a-collection

Wedge gate valve with internal thread SS 2599, TA

Wedge gate valve with internal thread SS 2599, TA

Art. no.: 4400651

In accordance with SS requirements in suitable parts. With wheel, non-ascending spindle. Connection DN 10-50 has threaded top piece, connection DN 65-100 has screwed cover with flat gasket. Valves with flanges are drilled. Max operating pressure and temperature: 1.6 MPa at max 100°C, 1.5 MPa at max 150°C.

Wedge gate valve with internal thread SS 2599, TA

Balancing valve TA Modulator, IMI

Balancing valve TA Modulator, IMI

Art. no.: 4882949

Pressure independent adjustment and control valve for modulating control. The new unique EQM characteristics provide very accurate temperature control.
The valve is compatible with linear and proportional actuators and 3-point actuators. A built-in differential pressure regulator provides high authority, stability and automatic limitation of the prescribed flow. Measurement of flow and available pressure enable optimization and diagnostics of the system.

Balancing valve TA Modulator, IMI

Balancing valve TA Modulator, IMI

Balancing valve TA Modulator, IMI

Balancing valve TA Modulator, IMI

Pneumatic Actuator Single Acting AVI 2400, a-collection

Pneumatic Actuator Single Acting AVI 2400, a-collection

Art. no.: 4659466

Single-acting pneumatic actuator with spring return, connections according to ISO 5211/DIN 3337 for valve fitting.
Solenoid valve interface, the upper part of the shaft top and top bore, for mounting accessories complying with the standard VDI/VDE-3845, NAMUR.

Pneumatic Actuator Single Acting AVI 2400, a-collection

Pneumatic Actuator Single Acting AVI 2400, a-collection

Pneumatic Actuator Single Acting AVI 2400, a-collection

Pneumatic Actuator Single Acting AVI 2400, a-collection

Pneumatic Actuator Single Acting AVI 2400, a-collection

Thermostat actuator MMA

Thermostat actuator MMA

Art. no.: 4808771

Thermal actuator with adapter for M28 and M30.

Thermostat actuator MMA

Thermostat actuator MMA

Thermostat actuator MMA

Solenoid Valve Asco Series 238, servo-operated

OEM Automatic AB

Solenoid Valve Asco Series 238, servo-operated

Art. no.: 4528053

Servo-controlled 2/2-position solenoid valve for open systems. Closed when power is off.

Solenoid Valve Asco Series 238, servo-operated

Solenoid Valve Asco Series 238, soft closing, OEM Automatic AB

OEM Automatic AB

Solenoid Valve Asco Series 238, soft closing, OEM Automatic AB

Art. no.: 4528045

Self-closing. Voltage 24 V DC. Direct-acting 2/2-position solenoid valve for open systems. Closed when power is off. Dampened closing.

Solenoid Valve Asco Series 238, soft closing, OEM Automatic AB

Ball Valve TA 900

Ball Valve TA 900

Art. no.: 8541949

With flat nipple end for connection to gasket, black knob.

Butterfly valve type LKB with weld connection and EPDM lining - AISI 316L

Butterfly valve type LKB with weld connection and EPDM lining - AISI 316L

Art. no.: 19080771

Excl. handle. Max operating pressure: At 20°C - 10 bar.

3-way ball valve T-bored AVi 1355, a-collection

3-way ball valve T-bored AVi 1355, a-collection

Art. no.: 4507645

3-way stainless steel ball valve, with reduced throughput and lockable handle. Installation flange ISO 5211 for direct installation of actuator. CE/PED 97/23/EC Category III, Module H Valves DN32-DN100 are marked CE0035.

3-way ball valve T-bored AVi 1355, a-collection

3-way ball valve T-bored AVi 1355, a-collection

3-way ball valve T-bored AVi 1355, a-collection

Dirt filter AVI 1750-S, a-collection

Dirt filter AVI 1750-S, a-collection

Art. no.: 5040134V

Dirt filter AVI 1750-S, a-collection

Dirt filter AVI 1750-S, a-collection

Dirt filter AVI 1750-S, a-collection

Dirt filter AVI 1750-S, a-collection

Dirt filter AVI 1750-S, a-collection

Slide gate valve Stafsjö MV PTFE

Slide gate valve Stafsjö MV PTFE

Art. no.: 4400630

The valve has a damper with bevelled edge which effectively cuts through different media. In the closed position, the damper is pressed against the seat, which gives a tight and reliable sealing. This special shut-off technology makes the MV valve suitable for both fluids and dry media such as paper pulp, sludge, biomass, powder and different types of waste.

Control Valves STV, MMA

Control Valves STV, MMA

Art. no.: 4892565

The STV balancing valve is used to adjust and balance the flow in heating and cooling systems, e.g. in trunks, paths, feeder tubes, shunt valve sets and cooling baffles.

Control Valves STV, MMA

Control Valves STV, MMA

Back-suction protection SYR 6800 CA, Somatherm

Back-suction protection SYR 6800 CA, Somatherm

Art. no.: 5021062

SYR 6800 CA is a non-return valve approved for liquids up to category 3 according to SS-EN 1717. The valve's task is to prevent contaminated drinking water from being transferred to the public or internal drinking water network. The back-suction protection consists of two back-mounted non-return valves with a pipe break and drain connection between .
SYR 6800 CA is used, among other things, for filling systems that only contain water.

Back-suction protection SYR 6800 CA, Somatherm

Ball Valve AVi 1390 A, a-collection

Ball Valve AVi 1390 A, a-collection

Art. no.: 4505800

With pressure-relief ball for venting and draining the secondary side. Made of brass CW617N, for compressed air

Ball Valve AVI 1335-S Lead-Free, a-collection

Ball Valve AVI 1335-S Lead-Free, a-collection

Art. no.: 5495066

For tap water heating / cooling system, diesel, glycol, neutral liquids, other media that do not attack the valve material. In lead-free brass, and full passage.

Ball Valve AVI 1335-S Lead-Free, a-collection

Ball Valve AVI 1335-S Lead-Free, a-collection

Ball Valve AVI 1335-S Lead-Free, a-collection

Ball Valve AVI 1335-S Lead-Free, a-collection

Ball Valve AVI 1335-S Lead-Free, a-collection

Butterfly valve AVI 1483 EPDM Wafer, a-collection

Butterfly valve AVI 1483 EPDM Wafer, a-collection

Art. no.: 4017363

Soft-sealing butterfly valve AVI 1483 with replaceable EPDM lining, Wafer model for tightening between flanges. High neck for insulation and lockable handle. ISO 5211 top flange for direct mounting of gear or actuator

Butterfly valve AVI 1483 EPDM Wafer, a-collection

Butterfly valve AVI 1483 EPDM Wafer, a-collection

Valve combination, LK 560. LK.

Valve combination, LK 560. LK.

Art. no.: 4311748

LK Valve combination 560 is a valve combination with mixing valve. Intended to be mounted on water heaters.

Valve combination, LK 560. LK.

Ball Filter Valve AVI 1375, a-collection

Ball Filter Valve AVI 1375, a-collection

Art. no.: 5060254

Ball filter valve of nickel-plated brass CW617N, filter of stainless steel. Suitable for neutral fluids, certain oils, gases and air. Chrome-plated brass ball, PTFE ball seat.

Ball valve 542 with EPDM adhesive sleeve sealing, Georg Fischer

Ball valve 542 with EPDM adhesive sleeve sealing, Georg Fischer

Art. no.: 5494497

Ball valve 542 with EPDM adhesive sleeve sealing, Georg Fischer

Leak Sealer B4 for Heating Systems

Leak Sealer B4 for Heating Systems

Art. no.: 5584487

Vacuum valve 4140 straight model, mounted vertically, Durgo

Vacuum valve 4140 straight model, mounted vertically, Durgo

Art. no.: 5021019

Straight model, mounted vertically.

Vacuum valve 4140 straight model, mounted vertically, Durgo

Leak Detector WaterFuse - Equipment, Tollco

Leak Detector WaterFuse - Equipment, Tollco

Art. no.: 5619884

Ball Valve AVI 1372M-S Lead-Free Press/Press M-profile, High Neck PN25, A-collection

Art. no.: 5495021

Showing 52 of 351