Order lines: 0

Ahlsell Products Electric Heating products 85-89 89 Heating cable and controlFloor heating

Floor heating

Underfloor heating cable

Underfloor heating mat

Underfloor heating foil

Underfloor heating accessories

Do you work with the installation of heating products such as radiators and heating cables? We at Ahlsell help you find heating products for your assignment. Regardless of whether you work with fixed installation 400V or plug 230V, we have the range. Electrical installations must be carried out by professionals. Here you will find oil-filled radiators, frost protection, mini elements, heating cable, and accessories for easy installation. Smart products from several major suppliers. With your professional know-how in the installation of heating products and good products, the job will be done safely. Explore our wide range of heating products and accessories here in the online store or visit your nearest Ahlsell store.

Accessory kit for Ebeco Foil

Accessory kit for Ebeco Foil

Art. no.: 8960653

Complete accessory kit for installation of Ebeco heating foil. Contents: double-insulated RTK cable, connection clips, insulation tape, sealing tape, yellow sign, sticker, installation instructions.

Accessory kit for Ebeco Foil

Parquet/Laminate underlay Ebisol

Parquet/Laminate underlay Ebisol

Art. no.: 8960170

Good insulation capacity
Ebisol 6 mm has the same insulation power as 100 mm of brick or 360 mm of concrete. Episol is used as the insulation under wood flooring, laminate and linoleum, with or without underfloor heating. The insulation board keeps cold and moisture out. The boards are water repellent and non-flammable.
Light and shock absorbing
The insulating board also has a footstep damping effect making the floor quieter to walk on. The board also has a footstep damping effect making the floor quieter to walk on.
Energy efficient
The special cellular structure means that Episol does not conduct heat but instead reflects the heat back towards the floor surface. By benefiting from the waste heat, the energy is used more effectively and energy consumption is reduced.
Low construction height
The insulating board is available in two thicknesses, 3 and 6 mm, and provides minimal build height.
NOTE! Existing plastic matting on floor must always be removed before installation of Ebisol.

Parquet/Laminate underlay Ebisol

Heating cable mat for shallow solutions under tile floors a-collection

Heating cable mat for shallow solutions under tile floors a-collection

Art. no.: 8982530

a-collection heating cable mat is available for areas between 1.5 and 8 m².
Power is 90 W/m² and the width is always 50 cm.
The mat is self-adhesive over the entire surface and can be laid directly on combustible surfaces.
The mat is only 3 mm thick and can be placed directly in tile adhesive or in screed.
Since the carpet is supplied without a thermostat, a thermostat must be ordered separately.
Choose between analogue and digital thermostat below.

Heating cable glue for Nexans heating cables

Heating cable glue for Nexans heating cables

Art. no.: 1647261

Nexans heating cable glue is a light yellow all-round melting adhesive in 11 mm rod shape. The adhesive is fast-paced with good heat resistance and good adhesion to most materials. The glue has an opening time of about 5-10 seconds. depending on the thickness of the glue and the temperature and thermal conductivity of the material.

• Application temperature: +170 - +200°C
• Rod length: 30cm
• Storage temp: +10 - +30°C

Warning sign Universal for Nexans heating cables

Warning sign Universal for Nexans heating cables

Art. no.: 8959710

Warning sign should always be put up when a heating cable has been installed in the ground, downpipes, gutters in and around water pipes and floors.

Mounting kit till underfloor heating cable a-collection

Mounting kit till underfloor heating cable a-collection

Art. no.: 8982400

The installation kit consists of a 2 m flexible pipe for floor sensor Ø 11 mm, transition sleeve 16 mm and 6 adhesive rods for the heating cable.

Underfloor heating cable, a-collection

Underfloor heating cable, a-collection

Art. no.: 8982421

The a-collection underfloor heating cable is a thin heating cable, only 5 mm in diameter, for flexible installation in wet and dry areas.
The cable output is 10W/m.
The cable has a connection end and is supplied with 2.5 m cold lead connector.

Your kit comprises three parts:
1: Select cable with consideration to the floor space and power needs.
2: Select an analogue or digital thermostat.
3: Add an installation kit that contains flexible pipes for the floor sensor and adhesive rods.
c/c measurement for the installation, it is always the area to be heated/cable length that is calculated.

Accessories for self-regulating heating cable ETL och T2RÖD

Accessories for self-regulating heating cable ETL och T2RÖD

Art. no.: 8949005

Crimping kit for ETL10 and T2Red heating cable. Contains heat-shrink tubing, vulcanising tape and installation instructions.

Accessories for self-regulating heating cable ETL och T2RÖD

Heating cable T2RED for all plastered floors

Heating cable T2RED for all plastered floors

Art. no.: 8946200

T2Red is a self-regulating heating cable for floor heating, 5-15W/metre, regulating the surface power output if the floor is insulated by a
carpet or suchlike. This reduces the risk of excessive temperatures at the same time as it is energy-efficient and provides the correct output across the entire room area depending on the conditions. This means that with a cold outer wall the power output increases and with strong sunlight the output decreases. T2Red together with T2Reflecta insulation boards and a timer thermostat can give up to 45% energy savings. The thermal cable is metre labelled. Max connection length 100m/10A, approx. 10 m². For larger areas, use a contactor.

T2Red is a PVC-free heating cable, does not emit any electrical fields and negligible magnetic fields.
T2Red is delivered in running metres on a drum, up to 300 m, and can be cut to the exact desired length. Thereafter a connection and termination kit is fitted. The heating cable can also be crossed without any risk of overheating. Connected directly to the thermostat.

Intended for plastering in levelling filler 10-15 mm for all types of top floors and spaces, e.g. in bathrooms, kitchens, bedrooms, halls and living rooms. In dry areas T2Reflecta insulation boards can be used, 13 mm: floating floor for wood, laminate and plastic carpeting. For clinkers, the boards must be attached with T2Reflecta adhesive. The upper side of T2Reflecta insulation boards is covered with T2Reflecta P-fix primer, thereafter an optional C2F-fix is used to attach the clinker tiles. Alternatively, the clinker tiles can be attached directly using T2Reflecta adhesive.

Insulating Disc Cable Board

Insulating Disc Cable Board

Art. no.: 8960180

Cable Board is an insulating board made of extruded polystyrene plastic, specially designed for Cable Kit with milled grooves, c / c 10 cm. The disc's special structure reflects the heat upwards in an extremely efficient way. Compared to a reference system without insulation, energy consumption is reduced by up to 45%. The holes in the disc let through if necessary. moisture. The disc is light and durable and the grooves make it easy to place the cable at exactly the right distance.

Thermoflex Kit 200 incl. EB-Therm

Thermoflex Kit 200 incl. EB-Therm

Art. no.: 8960244

Thermoflex Kit 200 is underfloor heating on self-adhesive carpet that is used on open, regular surfaces. It contains the thermostat EB-Therm 205 with 2 different energy saving programs. Construction height 4 mm. The carpet is rolled out and fixed in one and the same step and can be cut and angled. The installation is smooth as you do not need to measure c / c distance or fix the cable. Thermoflex Kit is installed on top of existing floor constructions of concrete, plaster or chipboard. Install with Thermo Board for an energy-efficient system.

Thermoflex Kit 200 incl. EB-Therm

Underfloor heating foil Ebeco Foil, 48 V

Underfloor heating foil Ebeco Foil, 48 V

Art. no.: 8960603

Ebeco Foil 48 V is a tough and reliable heating foil intended for underfloor heating in caravans. The build height is only 0.3 mm. The foils are connected with cables and connection terminals using special pliers and they are controlled by a transformer. Ebeco Foil is sold in running metres in different widths and can therefore be fitted perfectly to the area.

Fastening net metal for heating cable

Fastening net metal for heating cable

Art. no.: 8959524

Sander nets and metal nets for fixing heater cable to the ground/floor. 1x10 m.

T2 heater cable glue - glue sticks for glue gun

T2 heater cable glue - glue sticks for glue gun

Art. no.: 8949533

T2 Heater cable glue is a hot melt glue in rod form, intended for glue guns, with a very good adhesion for fixing heating cables to the floor base.
The glue has a setting time of approx. 15-30 sec depending on the thickness of the glued joint and the temperature of the materials. Good adhesion is obtained once the glue/glued joint has cooled to room temperature.
Length: 180 mm. Ø 12 mm.
Application temperature +200°C to +220°C.
Temperature resistance: +70°C.
Storage: Storage should be at room temperature.

Warning sign for heating cable

Warning sign for heating cable

Art. no.: 8960963

The sign informs that a heating cable is installed.

Splice set T2BLUE-T2QUICKNET

Splice set T2BLUE-T2QUICKNET

Art. no.: 8949086

Joint set for T2B, T2QuickNet Lo, CeraPro and T2Green. Heating cable to heating cable.

Heating cable T2BLUE

Heating cable T2BLUE

Art. no.: 8948682

T2B lå-10 is a 5 mm thin and flexible heating cable for setting in thin seams, 10W/meter.
PVC and halogen-free series, resistive heating cable with built-in return conductor (one connector end), and 2.5 m affixed cold cable. Negligible magnetic and electric field. The thermal cable is metre labelled. Connection voltage 230 V.

Placement in floor screed 10-15. Attaches with glue or cable tie/thread on mesh. Heating cables must not be crossed, laid together, or cut. Can be placed on a flammable surfaces, up to 125 W/m², min c-c 80 mm. T2Blå-10 is used primarily under tiles in bathrooms, hallways, and laundry rooms. Also approved for installation under laminate, plastic carpet, and wood floors according to instructions, max effect 90W/m², ie no denser than c-c 120 mm. Delivered in finished lengths, sensor hose, universal plate, and installation instructions.
Approved by SEMKO for the highest mechanical durability, 2000 N in accordance with IEC60800 class C. Base type in accordance with SS 424 24 11:1992: 90 CM.

T2B lå-10 is environmentally-adapted, and also registered in BASTA.
For other effects and installation options, follow the instructions in the packaging.

Heating cable T2Blue-20

Heating cable T2Blue-20

Art. no.: 8948663

T2Blå-20 is a 5 mm thin and flexible heating cable for inlay in concrete or spackled in for higher effect, 20W/meter.
PVC and halogen-free series-resistive thermal cable with built-in return conductor (one connector end) and 2.5 m mounted cold cable. Negligible magnetic and electric field. The thermal cable is metre labelled. Connection voltage 230 V.

Installation in concrete 30-50 mm, spackled in 12-20 mm. Attaches with glue or cable tie/thread on mesh. Thermal cables must not be crossed, placed together or cut. Do not place on flammable substrates. T2B lå-20 is mainly used under tile in, for example,outdoor rooms and basements where higher power is often required. Delivered in finished lengths, sensor hose, universal plate, and installation instructions.
Approved by SEMKO for the highest mechanical durability, 2000 N in accordance with IEC60800 class C. Base type in accordance with SS 424 24 11:1992: 90 CM.

T2Blå-20 is environmentally-friendly, and also registered in BASTA.
For other effects and installation options, follow the instructions in the packaging.

Underfloor heating foil Ebeco Foil

Underfloor heating foil Ebeco Foil

Art. no.: 8960626

Heating foil for underfloor heating for wooden floors, laminate floors and plastic carpets. The foil may only be installed in dry areas. Sold by the meter. without thermostat and accessories.

Underfloor heating cable series resistive, Cableflex

Underfloor heating cable series resistive, Cableflex

Art. no.: 8960102

Cableflex is a series of resistive heating cable suitable for clinker, natural stone floors and plastic mat. The cable is thin, only 4 mm, which gives a low construction height. Install with Cable Board and reduce energy consumption by up to 35%. Cableflex is the same cable used in our popular floor heating kits.

Underfloor heating cable series resistive, Cableflex

Insulating board Thermo Board

Insulating board Thermo Board

Art. no.: 8960160

Thermo Board is an energy-efficient insulation board for underfloor heating, primarily intended for use with the Thermoflex Kit or in wet rooms with wooden floors. The board of extruded polystyrene with fiberglass-reinforced surface layer has a high insulating ability and can be compared with about 500 mm concrete. Thermo Board is flexible and can be laid on all surfaces, is easy to cut and adapt to the surface and is not affected by the influence of moisture or moisture. Insulating board for underfloor heating in wet rooms with wooden floors, 3.6 m²

Heating cable package with digital thermostat, 20W / m

Heating cable package with digital thermostat, 20W / m

Art. no.: 8940632

Thin series-resistant two-conductor cable in coil packaging. Ø 5mm with mounted cold cable 2.5 m. Meter marked. Environmentally friendly PVC-free heating cable with halogen-free outer casing and negligible magnetic, electric fields. SEMKO-approved, CE-marked. Packaging with glue sticks, sensor hose and marking hose programmable touch-swipe clock thermostat with WIFI Remote control via app or voice control.

SENZ WIFI with white center plate and frame in color RAL9003 (type Exxact). May not be placed directly on combustible surfaces. The system meets the requirements for ECO design. 12 year warranty also on supplied thermostat. Can be extended to 20 years if the installation is performed by a Certified PRO installer. Location: concrete / leveling compound.

Heating cable package with digital thermostat, 10W / m

Heating cable package with digital thermostat, 10W / m

Art. no.: 8940601

Thin series-resistant two-conductor cable in coil packaging. Ø 5mm with mounted cold cable 2.5 m. Meter marked. Environmentally friendly PVC-free heating cable with halogen-free outer casing and negligible magnetic, electric fields. SEMKO-approved, CE-marked. Packaging with glue sticks, sensor hose and marking hose programmable touch-swipe clock thermostat with WIFI Remote control via app or voice control.

SENZ WIFI with white center plate and frame in color RAL9003 (type Exxact). May not be placed directly on combustible surfaces. The system meets the requirements for ECO design. 12 year warranty also on supplied thermostat. Can be extended to 20 years if the installation is performed by a Certified PRO installer. Location: leveling compound.

Heating cable package with digital thermostat, 10W / m

Heating cable package with digital thermostat, 10W / m

Heating cable package with digital thermostat, 10W / m

Heating cable package with digital thermostat, 10W / m

Heating cable package with digital thermostat, 10W / m

Heating cable package with digital thermostat (T2Red), self-limiting

Heating cable package with digital thermostat (T2Red), self-limiting

Art. no.: 8946230

Self-limiting underfloor heating cable in coil packaging. No cold termination end needed. Connected directly to the thermostat. Meter marked. PVC-free, negligible magnetic, electric fields. SEMKO, CE marked. Packing with glue sticks, sensor hose, extra connection, sign and SENZ programmable touch -Swipe clock thermostat SENZ with white center plate and frame in color RAL9003 (type Exxact) An extra front white RAL9010 (type Elko) Can be placed directly against a flammable surface, cut and crossed. 5-15 W / m. Max. 100m / 10A.
For casting in thin layers, in concrete or in Reflecta.

Cable clamp

Art. no.: 8960958E

Cable Clip is a cable clamp that is easily attached to the root net / reinforcement net. The heating cable is then mounted directly in the clamp. Cable Clip fits root net 2.5 mm and heating cable Ø 4 mm. One box is enough for about 4 m².

Plaster net 1x25 meters, galvanized

Plaster net 1x25 meters, galvanized

Art. no.: 8949530

Used as a base for heating cables in underfloor heating installations to obtain a distance to combustible surfaces. The plastering net also provides a reinforcement of floor constructions with leveling compound. The plaster net has squares 20x20 mm and is delivered on a roll with a width of 1 meter.

T2Reflecta Turntable Kit

T2Reflecta Turntable Kit

Art. no.: 8946260

Extra turntables for T2Reflecta underfloor heating system. The kit contains 6 turntables of 0.4x0.1m.
EPS turntables with finished grooves for T2Red heating cable. The boards are used for turning T2Red at the outer ends of the floor. Height 13 mm.

Joint set for heating cables ETL-10 & T2 Red

Joint set for heating cables ETL-10 & T2 Red

Art. no.: 8949006

Joint kit for heating cables ETL-10 and T2 Red are used for splicing or repair. Contains shrink tubing, splice sleeves and instructions.

Floor heating mat QuickNet-90, with thermostat

Floor heating mat QuickNet-90, with thermostat

Art. no.: 8940403

Thin environmentally friendly PVC-free dual-conductor cable with halogen-free housing, which is fully assembled on the net, only 3.5 mm. The carpet can be installed in leveling compound under clinker, parquet, laminate and wooden floor where low building height is desired. With an increased amount of glue on the net, the carpet now attaches even better. The cables can easily be detached from the grid and re-attached. Can be mounted directly on combustible surfaces. The system meets the requirements for ECO design. 2.5 meter cold cable. Width 500 mm.

Insulating board for T2Red 3 sqm, T2Reflecta

Insulating board for T2Red 3 sqm, T2Reflecta

Art. no.: 8946240

T2Reflecta consists of highly compressed EPS insulation material and a heat-distributing aluminum layer. The insulation board has finished grooves for T2Red underfloor heating cable. The board is 13 mm thick and easy to cut. Increases energy efficiency by fast heating the floor, up to 10 times faster than underfloor heating systems. up to 65% energy during the heating phase and reduces heat loss by up to 20% Intended for wood, tile and linoleum floors in dry areas (not for wet rooms) Adapted for 3.12m².
Dimensions of the boards WxLxT: 400x720x13 mm.
6 turntables included.

Heating Cable Kit 500

Heating Cable Kit 500

Art. no.: 8961080

Our most energy-efficient floor heating kit ever contains the EB-Therm 500 thermostat with several individually adjustable energy saving programs as well as simple and clear navigation. Together with the accessory EB-Connect WiFi, it is possible to control the floor heating via the Ebeco Connect app. The kit includes cable on drum, drum holder, thermostat EB-Therm 500, spiral hose with adapter and adhesive rods. Install with Cable Board and reduce energy consumption by up to 35%.

Cover front for EB-Therm 500 thermostat

Cover front for EB-Therm 500 thermostat

Art. no.: 8581901

The cover front allows you to change the appearance of the EB-Therm 500 to fit some of the most popular systems on the market. Frame not included.

Cover front for EB-Therm 500 thermostat

Cover front for EB-Therm 500 thermostat

Underfloor heating cable with digital thermostat, T2Black

Underfloor heating cable with digital thermostat, T2Black

Art. no.: 8940301

Thin and flexible heating cable on coil. Builds only 4 mm. The coil package makes installation easy and fast. The package contains adhesive rods, transducer hose, nameplate and NRG-DM programmable clock thermostat with white center plate and frame in color RAL9003 (type Exxact). The system meets ECO design requirements. The length of the connecting cable is 2.5 m. 12 year warranty also on supplied thermostat. Can be extended to 20 years if the installation is performed by a Certified PRO installer. CE-marked.

Thermoflex Kit 500 heating cable mat

Thermoflex Kit 500 heating cable mat

Art. no.: 8961103

Thermoflex Kit 500 is underfloor heating on self-adhesive mats for open, regular surfaces. Includes EB-Therm 500 with color display and several individually customizable energy saving programs. The thermostat is easy to handle and install. The mat can be cut and angled and has a build height of 4 mm. Installation goes smoothly as you do not need to measure c / c distance or fix the cable. Installed on concrete, plaster or chipboard floor structures. Install with Thermo Board for an energy efficient system.

Floor heating film Foil Kit, with EB-Therm 500

Floor heating film Foil Kit, with EB-Therm 500

Art. no.: 8961020

The floor heating foil kit is installed on floor structures made of concrete, plasterboard or chipboard. The halogen- and PVC-free foil is durable and reliable. Building height only 0.3 mm. The foil is connected with double insulated connection cables and connection terminals. Controlled with the EB-Therm 500 thermostat with two preset energy saving programs. The kit includes: underfloor heating film, thermostat EB-Therm 500, tape, connection terminals, RTK cables and coil hose. Always install with Ebisol for an energy-efficient system.

Supplement kit for Foil Kit

Supplement kit for Foil Kit

Art. no.: 8961025

Supplement kit for Foil Kit 65 W / m² excluding thermostat.
The floor heating foil kit is installed on floor structures made of concrete, plasterboard or chipboard. The halogen- and PVC-free foil is durable and reliable. Building height only 0.3 mm. The foil is connected with double insulated connection cables and connection terminals. The kit includes: underfloor heating film, tape, connection terminals, RTK cables and spiral hose. Always install with Ebisol for an energy-efficient system.

Hose for floor sensor

Hose for floor sensor

Art. no.: 8960541

Coil hose for thermostat sensor cable. Has an end closure that prevents fixing and jointing from leaking. The coil hose also includes the Ebeco Adapter which facilitates handling of the transition between the box and the coil hose. Warning sign is included. Length 2.5 m.

Fixing tape for Cableflex

Fixing tape for Cableflex

Art. no.: 8935349

Fixing tape for Cableflex, 15 mm x 20 m. The tape is used when laying Cableflex. Enough for about 4 m².

Glue rod 12x190 mm, for heating cable

Glue rod 12x190 mm, for heating cable

Art. no.: 1693993

Specially tested for fixing underfloor heating cable to common surfaces such as concrete, wood and plaster, applied with a glue chair. Free of solvents.

Underfloor heating cable Cableflex 20 W/m

Underfloor heating cable Cableflex 20 W/m

Art. no.: 8961137

Cableflex is a series of underfloor heating cables with many uses. The series offers different effects to cover all needs for underfloor heating solutions. The package includes cable on drum, warning sign and practical drum holder.

Installation cable for Underfloor Heating Foil Ebeco Foil

Installation cable for Underfloor Heating Foil Ebeco Foil

Art. no.: 0376603

Double insulated RTK installation cable used when installing Ebeco Foil. Length 25 m.

Press bar for Ebeco Foil

Press bar for Ebeco Foil

Art. no.: 8960690

Used when mounting Ebeco Foil to connect cables and connection terminals.

Cable guide for T2-Black underfloor heating cable

Cable guide for T2-Black underfloor heating cable

Art. no.: 8949550

Cable fastening straps for T2Black underfloor heating cable in plastic. 1 package contains 12 fastening straps and covers approximately 2.4 m².

Cable Clip floorheating

Cable Clip floorheating

Art. no.: 8949552

Cable clips are a cable clamp for fixing heating cable T2Blue, T2Black and T2Green on 2.5 mm root mesh. Attaches with the click-and-snap method (the clip attaches to the root net with a click). Works in both directions (along or across the wires of the root net). Can be placed on the upper thread or bobbin thread. Can also be placed in the cross on the root network. The cable clamps fit all nVent RAYCHEM series resistive floor heating cables. (T2Blue, T2Black, T2Green).

Underfloor heating cable Ebeco Cable Kit 200

Underfloor heating cable Ebeco Cable Kit 200

Art. no.: 8960838

Complete kit for tiles.
Cable Kit 200 is floor heating with good options for energy efficient heating.
The thermal cable is thin, with an installation height of only 4 mm.
It is practical and easy to bend, which simplifies installation.
The cable is attached with tape or adhesive rods that are included in the package. For all underlays.
The floor heating can be installed above existing floor constructions such as concrete, plaster or particle board.
The cable is then placed in a thin layer of filler. It is also possible to lay it in wooden joists.
Can be installed up to 120 W/m²

Showing 45 of 45