Order lines: 0

Ahlsell Products Electric Heating products 85-89 89 Heating cable and control Floor heatingUnderfloor heating accessories

Underfloor heating accessories

Do you work with the installation of heating products such as radiators and heating cables? We at Ahlsell help you find heating products for your assignment. Regardless of whether you work with fixed installation 400V or plug 230V, we have the range. Electrical installations must be carried out by professionals. Here you will find oil-filled radiators, frost protection, mini elements, heating cable, and accessories for easy installation. Smart products from several major suppliers. With your professional know-how in the installation of heating products and good products, the job will be done safely. Explore our wide range of heating products and accessories here in the online store or visit your nearest Ahlsell store.

Parquet/Laminate underlay Ebisol

Parquet/Laminate underlay Ebisol

Art. no.: 8960170

Good insulation capacity
Ebisol 6 mm has the same insulation power as 100 mm of brick or 360 mm of concrete. Episol is used as the insulation under wood flooring, laminate and linoleum, with or without underfloor heating. The insulation board keeps cold and moisture out. The boards are water repellent and non-flammable.
Light and shock absorbing
The insulating board also has a footstep damping effect making the floor quieter to walk on. The board also has a footstep damping effect making the floor quieter to walk on.
Energy efficient
The special cellular structure means that Episol does not conduct heat but instead reflects the heat back towards the floor surface. By benefiting from the waste heat, the energy is used more effectively and energy consumption is reduced.
Low construction height
The insulating board is available in two thicknesses, 3 and 6 mm, and provides minimal build height.
NOTE! Existing plastic matting on floor must always be removed before installation of Ebisol.

Parquet/Laminate underlay Ebisol

Heating cable glue for Nexans heating cables

Heating cable glue for Nexans heating cables

Art. no.: 1647261

Nexans heating cable glue is a light yellow all-round melting adhesive in 11 mm rod shape. The adhesive is fast-paced with good heat resistance and good adhesion to most materials. The glue has an opening time of about 5-10 seconds. depending on the thickness of the glue and the temperature and thermal conductivity of the material.

• Application temperature: +170 - +200°C
• Rod length: 30cm
• Storage temp: +10 - +30°C

Warning sign Universal for Nexans heating cables

Warning sign Universal for Nexans heating cables

Art. no.: 8959710

Warning sign should always be put up when a heating cable has been installed in the ground, downpipes, gutters in and around water pipes and floors.

Mounting kit till underfloor heating cable a-collection

Mounting kit till underfloor heating cable a-collection

Art. no.: 8982400

The installation kit consists of a 2 m flexible pipe for floor sensor Ø 11 mm, transition sleeve 16 mm and 6 adhesive rods for the heating cable.

Accessories for self-regulating heating cable ETL och T2RÖD

Accessories for self-regulating heating cable ETL och T2RÖD

Art. no.: 8949005

Crimping kit for ETL10 and T2Red heating cable. Contains heat-shrink tubing, vulcanising tape and installation instructions.

Accessories for self-regulating heating cable ETL och T2RÖD

Insulating Disc Cable Board

Insulating Disc Cable Board

Art. no.: 8960180

Cable Board is an insulating board made of extruded polystyrene plastic, specially designed for Cable Kit with milled grooves, c / c 10 cm. The disc's special structure reflects the heat upwards in an extremely efficient way. Compared to a reference system without insulation, energy consumption is reduced by up to 45%. The holes in the disc let through if necessary. moisture. The disc is light and durable and the grooves make it easy to place the cable at exactly the right distance.

Fastening net metal for heating cable

Fastening net metal for heating cable

Art. no.: 8959524

Sander nets and metal nets for fixing heater cable to the ground/floor. 1x10 m.

T2 heater cable glue - glue sticks for glue gun

T2 heater cable glue - glue sticks for glue gun

Art. no.: 8949533

T2 Heater cable glue is a hot melt glue in rod form, intended for glue guns, with a very good adhesion for fixing heating cables to the floor base.
The glue has a setting time of approx. 15-30 sec depending on the thickness of the glued joint and the temperature of the materials. Good adhesion is obtained once the glue/glued joint has cooled to room temperature.
Length: 180 mm. Ø 12 mm.
Application temperature +200°C to +220°C.
Temperature resistance: +70°C.
Storage: Storage should be at room temperature.

Warning sign for heating cable

Warning sign for heating cable

Art. no.: 8960963

The sign informs that a heating cable is installed.

Splice set T2BLUE-T2QUICKNET

Splice set T2BLUE-T2QUICKNET

Art. no.: 8949086

Joint set for T2B, T2QuickNet Lo, CeraPro and T2Green. Heating cable to heating cable.

Insulating board Thermo Board

Insulating board Thermo Board

Art. no.: 8960160

Thermo Board is an energy-efficient insulation board for underfloor heating, primarily intended for use with the Thermoflex Kit or in wet rooms with wooden floors. The board of extruded polystyrene with fiberglass-reinforced surface layer has a high insulating ability and can be compared with about 500 mm concrete. Thermo Board is flexible and can be laid on all surfaces, is easy to cut and adapt to the surface and is not affected by the influence of moisture or moisture. Insulating board for underfloor heating in wet rooms with wooden floors, 3.6 m²

Cable clamp

Art. no.: 8960958E

Cable Clip is a cable clamp that is easily attached to the root net / reinforcement net. The heating cable is then mounted directly in the clamp. Cable Clip fits root net 2.5 mm and heating cable Ø 4 mm. One box is enough for about 4 m².

Plaster net 1x25 meters, galvanized

Plaster net 1x25 meters, galvanized

Art. no.: 8949530

Used as a base for heating cables in underfloor heating installations to obtain a distance to combustible surfaces. The plastering net also provides a reinforcement of floor constructions with leveling compound. The plaster net has squares 20x20 mm and is delivered on a roll with a width of 1 meter.

T2Reflecta Turntable Kit

T2Reflecta Turntable Kit

Art. no.: 8946260

Extra turntables for T2Reflecta underfloor heating system. The kit contains 6 turntables of 0.4x0.1m.
EPS turntables with finished grooves for T2Red heating cable. The boards are used for turning T2Red at the outer ends of the floor. Height 13 mm.

Joint set for heating cables ETL-10 & T2 Red

Joint set for heating cables ETL-10 & T2 Red

Art. no.: 8949006

Joint kit for heating cables ETL-10 and T2 Red are used for splicing or repair. Contains shrink tubing, splice sleeves and instructions.

Insulating board for T2Red 3 sqm, T2Reflecta

Insulating board for T2Red 3 sqm, T2Reflecta

Art. no.: 8946240

T2Reflecta consists of highly compressed EPS insulation material and a heat-distributing aluminum layer. The insulation board has finished grooves for T2Red underfloor heating cable. The board is 13 mm thick and easy to cut. Increases energy efficiency by fast heating the floor, up to 10 times faster than underfloor heating systems. up to 65% energy during the heating phase and reduces heat loss by up to 20% Intended for wood, tile and linoleum floors in dry areas (not for wet rooms) Adapted for 3.12m².
Dimensions of the boards WxLxT: 400x720x13 mm.
6 turntables included.

Cover front for EB-Therm 500 thermostat

Cover front for EB-Therm 500 thermostat

Art. no.: 8581901

The cover front allows you to change the appearance of the EB-Therm 500 to fit some of the most popular systems on the market. Frame not included.

Cover front for EB-Therm 500 thermostat

Cover front for EB-Therm 500 thermostat

Hose for floor sensor

Hose for floor sensor

Art. no.: 8960541

Coil hose for thermostat sensor cable. Has an end closure that prevents fixing and jointing from leaking. The coil hose also includes the Ebeco Adapter which facilitates handling of the transition between the box and the coil hose. Warning sign is included. Length 2.5 m.

Fixing tape for Cableflex

Fixing tape for Cableflex

Art. no.: 8935349

Fixing tape for Cableflex, 15 mm x 20 m. The tape is used when laying Cableflex. Enough for about 4 m².

Glue rod 12x190 mm, for heating cable

Glue rod 12x190 mm, for heating cable

Art. no.: 1693993

Specially tested for fixing underfloor heating cable to common surfaces such as concrete, wood and plaster, applied with a glue chair. Free of solvents.

Installation cable for Underfloor Heating Foil Ebeco Foil

Installation cable for Underfloor Heating Foil Ebeco Foil

Art. no.: 0376603

Double insulated RTK installation cable used when installing Ebeco Foil. Length 25 m.

Press bar for Ebeco Foil

Press bar for Ebeco Foil

Art. no.: 8960690

Used when mounting Ebeco Foil to connect cables and connection terminals.

Cable guide for T2-Black underfloor heating cable

Cable guide for T2-Black underfloor heating cable

Art. no.: 8949550

Cable fastening straps for T2Black underfloor heating cable in plastic. 1 package contains 12 fastening straps and covers approximately 2.4 m².

Cable Clip floorheating

Cable Clip floorheating

Art. no.: 8949552

Cable clips are a cable clamp for fixing heating cable T2Blue, T2Black and T2Green on 2.5 mm root mesh. Attaches with the click-and-snap method (the clip attaches to the root net with a click). Works in both directions (along or across the wires of the root net). Can be placed on the upper thread or bobbin thread. Can also be placed in the cross on the root network. The cable clamps fit all nVent RAYCHEM series resistive floor heating cables. (T2Blue, T2Black, T2Green).

Showing 24 of 24