Orderrader: 0

Ahlsell Products Electric E-mobility AccessoriesPole & wall mount

Pole & wall mount

Ahlsell offers electric car chargers and accessories, such as cord holders, wall mounts, timers, RFID tags, and more. Electric car chargers require many different parts to function properly during installation and assembly. Ahlsell offers accessories such as WLAN communication cards, protective box roofs, and even simple signs. Functional and utility-enhancing accessories. In our public spaces, electric car chargers are here to stay. Learn more about our products online or visit your nearest Ahlsell store.

Post bracket Poleplate 330

Post bracket Poleplate 330

Art. nr.: 2700020

Poleplate is made of Swedish steel and powder coated for the highest quality. Poleplate is intended for easy mounting of a charging box. Poleplate is manufactured in Sweden for the Nordic climate. It is delivered in powder coated design to withstand weather and wind. Charging box holder Poleplate is a cost-effective Poleplate facilitates, for example, when changing from engine heater location to charging location and can thus be used to replace an engine heater hood.

Hole image for Charge Amps Aura
For mounting on 60 mm post pipes
Robust construction in steel
Powder coated, can be delivered in different colors

Charging box holder / Wall bracket Wallplate 250

Charging box holder / Wall bracket Wallplate 250

Art. nr.: 2480368

Wallplate is a universal wall bracket for charging boxes. Wallplate provides a stable flat mounting surface even on uneven facades and minimizes stresses that can otherwise be created in the back of the charging box. Wallplate is designed to enable installation of different charging box models of different sizes. The integrated roof protects against Holes for each charging box are drilled directly in the bracket during assembly.

For wall mounting of charging box
• Facilitates installation on uneven facades
• Wiring can be routed behind the Wallplate
• Roof that protects the charging box from precipitation
• Powder coated

Wallplate fits the following chargers, among others:
ABB Terra AC Wallbox
Elinta HomeBox Slim
Ensto One
Garo GLB
Wallbox Pulsar
Easee
Charge Amps Halo

Cord holder for a home charger

Cord holder for a home charger

Art. nr.: 2449859

Cable holder for mounting on stand for charging boxes. Cord holder is mounted on stand GLB.

Pole mount double mounting

Pole mount double mounting

Art. nr.: 2449176

Pole bracket is used to mount double charging boxes or a charging box of the type GLB. The pole bracket is equipped with a terminal block for further feeding. The product is designed to facilitate conversion of poles from the engine heater outlet. Pole attachment also has the option of installing various accessories on mounting plate. Mounting plate and other components can be ordered as accessories.

Post bracket 60 mm load box GTB

Post bracket 60 mm load box GTB

Art. nr.: 2480330

Double charging boxes can be mounted on a wall or post. The wall mounting is done either directly or with the accessory GTB wall bracket, which is recommended, for example, if cables come from the top of the wall. The post bracket is available for both a round 60 mm post and GARO's oval post.

Post bracket a charging box DIN

Post bracket a charging box DIN

Art. nr.: 2480025

Post bracket that fits CHARGESTORM CONNECTED, enables post mounting of charging box. The post bracket is installed against an existing 60mm post pipe or purchased via CTEK E-Mobility. The charging box is mounted against the post bracket with four supplied bolts.
2480025 also included with junction box and DIN rail.

Wall bracket for Type 2 connector

CTEK E-Mobility

Wall bracket for Type 2 connector

Art. nr.: 2480311

Angled wall bracket for Type 2 connector. Fits only cables with Type2 connector. Mounted smoothly with 4 included screws. Made of durable ABS plastic in black.

Wall bracket Njord Go

CTEK E-Mobility

Wall bracket Njord Go

Art. nr.: 2480342

Wall bracket for mounting the portable charging box NJORD ™ GO.

Post bracket Halo

Post bracket Halo

Art. nr.: 2445601

Bracket for charging station Halo for pole mounting.

Wall bracket charging cable T2

Wall bracket charging cable T2

Art. nr.: 2480381

Wall bracket for Type 2 cable. The cable is easy to lock in the docking unit (not included). Keep your Type 2 charging cable safe and secure when not in use. Easily mounted on all walls to store the charging cable, protect it from theft, and to be accidentally run over. The docking unit also prevents water and dirt from penetrating the socket. Suitable for all Type 2 cables.

Charging cable holder Daytona T2

Charging cable holder Daytona T2

Art. nr.: 2480356

Charging cable holder Daytona T2. A flexible and stylish holder for charging cable for electric car made of steel. Daytona T2 is intended to be mounted on a wall or on post pipes. The charging cable holder is designed by Next Green and manufactured in Sweden for the Nordic climate. It is delivered in powder-coated design light gray - RAL7004 To be mounted on post pipes Ø60 mm, the accessory staple kit is needed.

Made of 2mm sheet metal
Powder coated
Mounting on 60 pipes
DIN rail with connection point
Easy installation
Prepared for mounting earth leakage circuit breakers
270mm mounting surface
Delivered partially assembled "

Post bracket Poleplate 165

Post bracket Poleplate 165

Art. nr.: 2700019

Poleplate is made of Swedish steel and powder coated for the highest quality. Poleplate is intended for easy mounting of a charging box. Poleplate is manufactured in Sweden for the Nordic climate. It is delivered in powder coated design to withstand weather and wind. Charging box holder Poleplate is a cost-effective Poleplate facilitates, for example, when changing from engine heater location to charging location and can thus be used to replace an engine heater hood.

Hole image for Garo GLB, Ensto One and Elinta Homebox Slim
For mounting on 60 mm post pipes
Robust construction in steel
Powder coated, can be delivered in different colors

Charging box holder 190S

Charging box holder 190S

Art. nr.: 2480357

Polebox is a post bracket for charging boxes, intended for mounting on a Ø60 mm pipe post. Polebox 190S facilitates, for example, when changing from engine heater location to charging location and can thus be used to replace an engine heater hood. space inside the Polebox 190S.

Made of 2mm sheet metal
Powder coated
Mounting on 60 pipes
DIN rail with connection point
Easy installation
Prepared for mounting earth leakage circuit breakers
190mm mounting surface
Delivered partially assembled

Polebox 190S fits the following chargers, among others:
ABB Terra AC Wallbox
Elinta HomeBox Slim
Garo GLB
Wallbox Pulsar
Easee
Charge Amps Halo

Charging box holder 205 D2

Charging box holder 205 D2

Art. nr.: 2480440E

Polebox is a post bracket for charging boxes, intended for mounting on a Ø60 mm pipe post for two charging boxes back-to-back. power cable supply inside the pipe pole Two earth fault circuit breakers can be placed inside the Polebox 205 D.

Made of 2mm sheet metal
Powder coated
Mounting on 60 pipes
DIN rail with connection point
Easy installation
Prepared for mounting earth leakage circuit breakers
205mm mounting surface
Delivered partially assembled

Polebox 205 D fits the following chargers, among others:
ABB Terra AC
Easee
Wallbox
Elinta HomeBox Slim
Garo GLB

Clamp set for Daytona T2

Clamp set for Daytona T2

Art. nr.: 2480367

Klammersats till laddkabelhållare Daytona T2 möjliggör montage på 60mm stålrör. Klammersatsen är avsedd att monteras tillsammans med laddkabelhållaren Daytona T2. Tillverkad i Magnelis. Montering på 60-rör. Enkel installation. Levereras med fästdetaljer (skruv och mutter).

Charging box holder 270 D

Charging box holder 270 D

Art. nr.: 2700070

Next Green Polebox is a post bracket for charging boxes, intended for mounting on a 60 mm pipe post. Polebox facilitates, for example, when changing from engine heater location to charging location and can thus be used to replace an engine heater hood. a built-in distribution terminal for up to 2 x 5G25 electrical cable for further connection to the next charging post.From the distribution terminal in Polebox, the respective charging box is then connected with 5G2.5 rubber cable.Polebox can be optionally equipped with DIN rails for mounting an earth fault circuit breaker, Wifi router or 3G / 4G modem and power supply. Everything fits in the box. Polebox is made of Swedish steel and powder coated for the highest quality. Polebox is very easy to install. It can be prepared indoors by mounting charging boxes and pulling the wiring from the spreading terminal. the existing pipe and the hood with the chargers are lifted and hooked up, then it is easy to access to screw the phase t the supply lines in the terminal.

Fits charging boxes with maximum hole pattern 270mm wide and 430mm high. Polebox 270 D fits the following chargers, among others: Elinta Homebox, DEFA UNO, Zaptec PRO

Post bracket single

Eldon Installation

Post bracket single

Art. nr.: 2480233

Charging box holder single. To mount a charging box. Attached to post flange ECOFLP and then to a 60mm post.

Cable holder Type 2 wall

Eldon Installation

Cable holder Type 2 wall

Art. nr.: 2480264

Cable holder for a Type 2 charging cable for charging box for wall bracket. Including Type 2 glove.

Ceiling and floor bracket HD 60

Ceiling and floor bracket HD 60

Art. nr.: 2700176

Next Green - Ceiling and floor bracket HD 60 has been developed to mount a 60mm post pipe for further installation of a charging box from the ceiling or floor, for example in a parking garage. The ceiling and floor bracket allows for cable entry 180˚. The bracket is delivered with U-bolts for mounting 60mm pipes of any length. Attached with expander. Screw and plug not included. Post tubes not included.

Charging box holder Poleplate 225 Z

Charging box holder Poleplate 225 Z

Art. nr.: 2700251

Next Green Poleplate 225 Z is a post bracket for charging boxes, intended for mounting on a 60 mm pipe post. Poleplate is made of Swedish steel and powder coated for the highest quality. Poleplate is intended for easy mounting of a charging box. Poleplate is manufactured in Sweden for the Nordic climate. It is delivered in powder-coated design to withstand weather and wind. Charging box holder Poleplate 225 Z is a cost-effective post bracket developed for Zaptec Pro. Poleplate facilitates, for example, when changing from engine heater location to charging location and can thus be used to replace an engine heater hood.

Pipe bracket beam and facade

Pipe bracket beam and facade

Art. nr.: 2700297

Next Green - Pipe bracket beam and facade 60-108 is developed for mounting a 60-108mm post pipe on, for example, deflector plank, deflector beam, edge beam, retaining walls or facades for further installation of charging box. The bracket is delivered with bolts for mounting 60mm pipes of any length.

Post flange ø60 universal

Eldon Installation

Post flange ø60 universal

Art. nr.: 2448311

Post flange for 60mm pipe. Needed to attach our charge box holders and our engine heat enclosures.

Charging box holder Poleplate 160 E

Charging box holder Poleplate 160 E

Art. nr.: 2700068

Poleplate 160 E is a pole mount for charging boxes, intended for mounting on Ø 60 mm pole tubes. Poleplate is made of Swedish steel and powder coated for the highest quality. Poleplate is designed to easily mount a charging box. Poleplate is manufactured in Sweden for the Nordic climate. It is delivered in a powder-coated finish to withstand the elements. Charging box holder Poleplate 160 E is a cost-effective pole mount developed for Easee charging box. Poleplate facilitates, for example, when changing from an engine heater location to a charging location and can be used to replace an engine heater center.

Cable hook Entity, Wall

Cable hook Entity, Wall

Art. nr.: 2701024E

You attach the Entity Wallhook easily to a wall or post to neatly and easily hang up your charging cable when you are not using it.

Stolpfäste Entity PRO, back to back

Stolpfäste Entity PRO, back to back

Art. nr.: 2701020E

Lid Entity, PRO

Lid Entity, PRO

Art. nr.: 2701010E

Täcklock GARO Entity Pro, att fästa på installationsmodul. Svart täcklock som skyddar konsolen till dess att installation är aktuell.

Pole mount Entity PRO, single

Pole mount Entity PRO, single

Art. nr.: 2701019

Post mount Entity Pro 60mm Single
GARO Entity PRO can be easily installed on a wall or on a stand. Maybe it's a long way from the garage driveway to the nearest house wall. Our accessories are minimalistically designed to create a stylish feel. The GARO Entity PRO family includes a series of accessories for mounting. Choose stands or poles depending on how the installation looks. Single, double or quadruple installation is possible with our new robust solutions.

Angle bracket 60

Angle bracket 60

Art. nr.: 2700409

Angle bracket 60 is designed to be mounted on retaining walls or facades where distance is needed for further mounting of the charging box. Angle bracket 60 is galvanized and has a diameter of 60 mm.

Sign post clamp single, for 60 mm post

Sign post clamp single, for 60 mm post

Art. nr.: 0667686

Sign clamp that enables the mounting of traffic signs on 60 mm poles. Sold individually.

Pole mount Entity Compact

Pole mount Entity Compact

Art. nr.: 2701040

Entity Compact 60mm pole mount. Enables single-sided or back-to-back mounting. GARO Entity Compact can be easily installed on a wall or on a stand. Maybe it's a long way from the garage driveway to the nearest house wall. Our accessories are minimalistically designed to create a stylish feel. The GARO Entity Compact family includes a series of accessories for mounting. Choose stands or poles depending on how the installation looks. Single or Double installation is possible with our new robust solutions.

Charging box holder Poleplate 300 D

Charging box holder Poleplate 300 D

Art. nr.: 2700462

Next Green Poleplate 300 Tak Dubbel is a pole tube bracket for charging boxes, intended for double ceiling mounting on 60 mm pole tube. Poleplate is made of Magnelis steel. Poleplate is designed to easily mount a charging box. Poleplate is manufactured in Sweden for the Nordic climate. Charging box holder Poleplate is a cost-effective pole mount. Poleplate facilitates, for example, the installation of double charging boxes in parking garages suspended from the ceiling.

Charging box holder Poleplate Phasebox

Charging box holder Poleplate Phasebox

Art. nr.: 9800610

Charging box holder Poleplate psasande for Phasebox. Supplied packaged with assembly instructions.

Charging box holder Poleplate 150 P

Charging box holder Poleplate 150 P

Art. nr.: 2700735E

Next Green Poleplate 150 P is a pole mount for charging boxes, intended for mounting on Ø 60 mm pole tubes. Poleplate is made of Swedish steel and powder coated for the highest quality. Poleplate is designed to easily mount a charging box. Poleplate is manufactured in Sweden for the Nordic climate. It is delivered in a powder-coated finish to withstand the elements. Charging box holder Poleplate 160 E is a cost-effective pole mount developed for Easee charging box. Poleplate facilitates, for example, when changing from an engine heater location to a charging location and can be used to replace an engine heater center.

Charging box holder Poleplate 150 P

Charging Pole Ø60 Matt black

Charging Pole Ø60 Matt black

Art. nr.: 2700862

Pretec's Charging Pole has been developed to be easily mounted on a buried Pretec steel foundation.
The charging post is made of a Ø60mm steel tube and has a welded-on foot plate with a hole pattern Ø24mm cc 160mm. Height 1100mm.

The surface treatment in matte black has three stages for optimal rust protection.
Step 1:
High-alloy zinc that provides good corrosion protection. Excellent protection under paint as it prevents paint from leaking if the posts are damaged.

Step 2:
Phosphating + ED painting. A rust protection varnish with very good corrosion protection and is used as a primer before powder coating. Exceptional penetration ability in tight spaces, which means that even the inside of the pipe is rust-resistant.

Step 3:
Powder coating, done for visual reasons and as extra wear protection.

Visar 34 av 34