Order lines: 0

Ahlsell Products Electric Control cabinets 25-26 25 Unit boxesClimate regulation

Climate regulation

Do you need an appliance cabinet? Ahlsell helps you find the products for smooth installations, individual or combined. With tailor-made appliance cabinets, you prevent water and dirt from entering. Choose appliance cabinets and other wall cabinets in stainless aluminum or sheet steel that are stable. Here you will find the right appliance cabinets and accessories for all kinds of jobs. We provide smart solutions from most major suppliers for mounting on walls, units, or other places. The majority of products are environmentally assessed according to Sunda Hus, Byggvarubedömning, and food approved. Delivery throughout Sweden. Explore our wide range of appliance cabinets, enclosures, and accessories here in the online store or visit your nearest Ahlsell shop.

Pleated filter SK

Pleated filter SK

Art. no.: 2507306

Pleated filter for filter and ceiling fans, cooling units and chillers.

Pleated filter SK

Thermostat Schneider Electric

Schneider Electric

Thermostat Schneider Electric

Art. no.: 2579847

Temperature range 0-60°C

Filter fans NSYC

Schneider Electric

Filter fans NSYC

Art. no.: 2579869

Filter fans with high performance and low power consumption. Filter fans create forced circulation in the cabinet so that heat is laid out through the outlet filter, which is ordered separately. Assumes that the ambient temperature is at least 5 degrees lower than the temperature inside the housing.
Easy to install and maintain. The filter should be replaced regularly.
IP54 Encapsulation class.

Exhaust filter Schneider Electric

Schneider Electric

Exhaust filter Schneider Electric

Art. no.: 2579878

Colour RAL 7035

Thermostat ETR200

Thermostat ETR200

Art. no.: 2519082

For temperature control inside the control cabinet together with the heating element or for the regulation of filter fans, heat exchangers or other climatic equipment.
Snap-in fastening on 35 mm rail DIN 46277 and EN 50022. in accordance with VDE 0875 degree N of interference.

Thermostat ETR201

Thermostat ETR201

Art. no.: 2519083

For temperature control inside the control cabinet together with the heating element or for the regulation of filter fans, heat exchangers or other climatic equipment.
Snap-in fastening on 35 mm rail DIN 46277 and EN 50022. in accordance with VDE 0875 degree N of interference.

Thermostat ETR202

Thermostat ETR202

Art. no.: 2519084

For temperature control inside the control cabinet together with the heating element or for the regulation of filter fans, heat exchangers or other climatic equipment.
Snap-in fastening on 35 mm rail DIN 46277 and EN 50022. in accordance with VDE 0875 degree N of interference.

Filter fans EF

Art. no.: 2519160

Eldon filter fans and exhaust filters are installed with a time-saving "click-in" mount. It requires only one penetration and no screws. Enclosure class IP54 and a working temperature between -15°C and + 55°C.

Evacuation filter, EFA, Eldon

Evacuation filter, EFA, Eldon

Art. no.: 2519133

With structural lacquer, rubber enclosure shall be used.

Filter fan Top Therm

Filter fan Top Therm

Art. no.: 2569085

Faster - with tool-free assembly. Simplify your work and save time without tools. Mounting in the housing, changing the direction of the air flow, electrical connection and quick replacement of the filter mat. Better - through the innovative technology of the diagonal fan. Pressure-stable diagonal fan provides higher energy efficiency and better air flow. The distribution of the air also means that hotspots are prevented more effectively. Everywhere - through full compatibility with the previous filter fan program. We make the transition as simple as possible as air effects and installation dimensions are the same as before.

Spare filter SK

Spare filter SK

Art. no.: 2569020

For filter fans and exhaust filters

Exhaust filter SK

Exhaust filter SK

Art. no.: 2569125

Replacement filters.

Thermostat SK

Art. no.: 2569270

For cabinets with temperature range +5°C to + 55°C Bimetal thermostat with thermal return. 1-pole. Alternating contact with moment breaker function.

Heating element HGK047

Heating element HGK047

Art. no.: 2598800

This heater is advantageously installed in enclosures to prevent condensation, and to maintain an appropriate temperature. Owing to its design, a so-called "chimney effect" is formed that causes the air to rotate and thus effectively spreads the heat into the application. Heating source consists of PTC element. PTC is a ceramic blend that provides long service life, and is capable of being heated up for a long time. This is a semiconductor which adapts its output to the surrounding temperature. PTC-element has high starting current and provides full output almost immediately. The current later drops quickly and the element is thereafter self-regulating, in other words, the warmer the surroundings the less out the element delivers. The heater can be mounted quickly and easily on the DIN rail, thanks to the bracket on the heater's back.
The heater should always be installed together with a regulator (thermostat and/or hygrostat) for best function.

Thermostat KT

Art. no.: 2506324

KTO 011 is an electromechanical thermostat with 1 NC contact for, for example, regulation of heating elements.
KTS 011 is an electromechanical thermostat with 1 NO contact for regulating, for example, filter fans or overheating alarms.

KTO111 and KTS111, which replace the older series KTO / KTS011. One of the updates is the new terminals that are push-in, which allows you to connect the thermostat completely without tools. The terminals are located in the front for easy access. Large setting knobs that make it easier to see when you set the temperature. Thanks to optimized air gap and increased crawl distance, can be used at up to 5000 meters altitude.

Heating element CSF060

Heating element CSF060

Art. no.: 2599014

This heater is advantageously installed in enclosures to prevent condensation, and to maintain an appropriate temperature. Owing to its design, a so-called "chimney effect" is formed that causes the air to rotate and thus effectively spreads the heat into the application. Heating source consists of PTC element. PTC is a ceramic blend that provides long service life, and is capable of being heated up for a long time. This is a semiconductor which adapts its output to the surrounding temperature. PTC-element has high starting current and provides full output almost immediately. The current later drops quickly and the element is thereafter self-regulating, in other words, the warmer the surroundings the less out the element delivers. Model CSF060 has integrated thermostat with permanently set value, which makes the installation very quickly and reliability very high. Integrated thermostat means less cabling that saves both time and money.

Ventilation hood DA284

Ventilation hood DA284

Art. no.: 2598897

Execution that prevents dust and water from entering the fan. High air flow but low noise level.
Simple installation and flexible service. Standard filter IP54. Also remembers spare filter for IP43 or IP55.

Double thermostat ZR

Double thermostat ZR

Art. no.: 2599043

Two thermostats in same housing. One with switching contact for regulation of heating and one with end contact for example for filter fan control or activation of overheating protection.

Heating element EHG

Heating element EHG

Art. no.: 2519058

The element prevents condensation and prevents corrosion and creep feeds. Profile casing is made of anodised aluminium and is the channel format for optimal heat dissipation. Power consumption and heat emission is controlled by built-in PTC resistor. To achieve the full regulation function within the predetermined temperature values the element must be connected via a thermostat (ETR). Is mounted vertically with the connection facing down on 35mm DIN rail. Is accompanied by safety barrier against vibration as standard. Interference filter is not needed.

Ventilation hood PA

Ventilation hood PA

Art. no.: 2598894

Double-acting membrane

Thermostat 7T

Art. no.: 2504181

Thermostat bimetall10A width17,5mm

Thermostat / hygrostat 7T

Thermostat / hygrostat 7T

Art. no.: 2504184

Thermostat and hygrostat, adjustable, 4 functions width17,5mm

Heating element EGL

Heating element EGL

Art. no.: 2502867

The heating fan ELR distributes the heat evenly throughout the cabinet with a fan, which prevents the appearance of heating pockets. You avoid condensation even when the ambient temperature drops sharply.

Showing 23 of 23