Order lines: 0

AhlsellProducts

Ahlsell

Heating and Sanitation

Technical insulation

Building Sheet Metal

Tools & Machines

Construction range

Personal protection

Storage & Handling

Garden & Lesiure

Appliances & Consumer electronics

Control Panel SMART, Swegon

Control Panel SMART, Swegon

Art. no.: 66130074

For Swegon housing unit CASA SMART. Can be mounted on the surface together with the mounting frame.

Duct Connection NSN, ETS

Duct Connection NSN, ETS

Art. no.: 66641524

With radius and broad pop rivet edge. For connection to the rectangular duct.

Pipe Section 800 alu-armored Insulation thickness 30mm, Rockwool

Pipe Section 800 alu-armored Insulation thickness 30mm, Rockwool

Art. no.: 47023015

Pipe section 800 is a non-deformable pipe shell made of moisture- and water-repellent Rockwool . It has a good pressure strength and non-deformability are good which serves as a good underlayer cladding.
The pipe section is enveloped with reinforced aluminium foil that has an overlap with self-adhering tape. The area of use for a pipe section is primarily heat- and condensation insulation both in industry and in the plumbing profession.
It has an effective insulating capacity and also functions at high temperatures; highest workable temperature is 650º and for an outer layer 80º. The product is spiral wound with galvanised steel wire. Meets water, ventilation and sanitation-AMA standards for A class. Type approval TG 0509/02.

Dimensional change NFB, Eccentric (Nipple-Nipple), ETS

Dimensional change NFB, Eccentric (Nipple-Nipple), ETS

Art. no.: 66641864

Eccentric, push in-push in.

Duct NTO, 3 m, spiral-seamed, ETS

Duct NTO, 3 m, spiral-seamed, ETS

Art. no.: 66640316

Spiral seamed ventilation ducts attracted in 3m lengths.
Made of galvanized steel sheet. Zinc-coated inside and outside with a minimum thickness of 275 g / m² (material thickness 0.5-1.2 mm). Meets cleanliness class M1 according to RTS and density class D. The weight is expressed in kilograms / meter.

Duct Fans K EC SILEO, Systemair

Duct Fans K EC SILEO, Systemair

Art. no.: 66411002

EC fans are very energy efficient and easy to control. They can be controlled speedlessly to match the airflow requirement, potentiometer supplied. For the same air flow, they consume considerably less energy than fans with AC motors. EC motors contribute to large reductions in energy use, especially in speed control. In speed control the energy consumption of the EC motor is much lower than for an asynchronous motor with a corresponding power. Reduced energy use guarantees lower operating costs. The K EC series is intended for duct mounting. All K-fans have at least 25 mm long connection socket. To facilitate installation, the K-fans have pre-assembled mounting brackets as standard. FK bracket makes mounting / disassembly easy and prevents vibration transfer to duct. The fans have backward curved blades and maintenance-free outer rotor motor (EC) and are supplied with a pre-coupled potentiometer (0-10V), factory set to 6-10V. To protect the motor from overheating, the fans have integrated motor protection. The casing is made of galvanized steel sheet and is folded, which provides a close to airtight casing.

Bend NV/NVP-90°, ETS

Bend NV/NVP-90°, ETS

Art. no.: 66640908

Pressed ventilation elbow.

Bend NV/NVP-90°, ETS

Combi grille, Systemair

Combi grille, Systemair

Art. no.: 19054483

Combi grille, Systemair

Duct NTO, 1.5 m, spiral-seamed, ETS

Duct NTO, 1.5 m, spiral-seamed, ETS

Art. no.: 6640010

Spiral-folded ventilation ducts. Unlocked. Dimensions and tolerances (according to European standard - EN 1506). The pipes are made of hot-dip galvanized steel sheet according to EN 10327 with zinc thickness 275 g / m2 (double-sided). This material is suitable for use in environment with corrosivity class C2 according to ISO 9223 and / or environmental class M2 according to HVAC AMA 98. Tolerances Sheet thickness: According to SS-EN 10143 Weight: +/- 10%.

Ventilation duct in unlocked design.
NOTE! the price is per piece but orders can only be made on whole frp.

Roof cap ABC-KH, ABC Vent

Roof cap ABC-KH, ABC Vent

Art. no.: 19059271

Circular roof head, known as a ‘Chinese hat’ for air conditioning, property and industrial ventilation. Sleeve connector, rain protected.
Can be placed in exposed positions. Air direction - horizontal. The hood is manufactured as the standard in sleeve measurement and is equipped with a small animals-proof metal mesh.
Manufactured in aluminium zinc.

Roof cap ABC-KH, ABC Vent

Roof cap ABC-KH, ABC Vent

Bend BDEB-45°, FläktGroup

Bend BDEB-45°, FläktGroup

Art. no.: 6640806

Bend BDEB-45°.

Duct Connection BDEA-5, FläktGroup

Duct Connection BDEA-5, FläktGroup

Art. no.: 6641524

With radius and broad pop rivet edge. For connection to the rectangular duct.

Fire/smoke damper BSKC6, Bevent Rasch

Fire/smoke damper BSKC6, Bevent Rasch

Art. no.: 6542910

Circular fire/smoke damper, available in sizes from 100 mm to 630 mm. Fire class EI60/EI60S. Equipped with 24V safety actuator and thermal sensor. Closed when power is off. Lightweight and easy to install. Many installation options. P and CE certified. BRMK mounting kit recommended.

Connection terminal 221 Wago for all lead types

Connection terminal 221 Wago for all lead types

Art. no.: 1440908

Openable connection clamp for all types of CU conductors 2-, 3- and 5-pole. The conductor is connected by raising the orange arm, inserting the stripped conductor and returning the arm. Equipped with double test holes.

Connection terminal 221 Wago for all lead types

Connection terminal 221 Wago for all lead types

Connection terminal 221 Wago for all lead types

Connection terminal 221 Wago for all lead types

Connection terminal 221 Wago for all lead types

Bend BDEB-90°, FläktGroup

Bend BDEB-90°, FläktGroup

Art. no.: 6640910

Bend BDEB-90°.

Plastic Hose PUR L-F, 5.0m, Masterflex

Plastic Hose PUR L-F, 5.0m, Masterflex

Art. no.: 19056575

Master-PUR LF Trivolution. PU Suction & Transport Hose, very light, antistatic, microbe-resistant. Spiral: spring steel spiral. Wall: polyester polyurethane (according to DIN ISO 4649 more wear-resistant than polyether polyurethane). Wall thickness between the spirals approx. 0.4 - 0.5mm. Application area: Transport of fine particles, such as dust and powder. Suction & transport hose for abrasive materials, liquids, and gases. Protective hose for mechanical impact. Extraction of oil mist. Properties: Flame retardant according to DIN 26057. Flame retardant according to DIN 4102 B1, antistatic, surface resistance 10^9 Ohm, microbe-resistant, minimum bending radius, very wear-resistant and very flexible. Compressible approx. 1:5 symmetrical folds. Free from halogens. Withstands repeated bending, high tensile strength. Generally good UV and ozone resistance. Very light. Temperature range: -40°C to +90°C Peaks up to +125°C.

Kitchen and Ventilation Hose, Fresh

Kitchen and Ventilation Hose, Fresh

Art. no.: 6630546

The hose is type-approved and developed to meet the highest demands in ventilation systems. On the inside of the hose, there are four layers of laminated aluminium. Resistant against high temperatures (max. 250 ° C), highly resistant to chemicals, easy to clean. Approval: Connection between fan/hood and duct. Type approval number. 0025 Swedish certified.

Aluminum Tape Smooth, Isover

Aluminum Tape Smooth, Isover

Art. no.: 19051110

Cable gland Brass “Perfect" EMC, Metric thread

Cable gland Brass “Perfect" EMC, Metric thread

Art. no.: 1476028

EMC PERFECT cable gland made of nickel-plated brass designed for shielded cable with braid. Equipped with metric thread. Easy to mount - the cable's shield is pressed down to the bottom of the cable gland using the plastic insert. Very good strain relief properties. Supplied with neoprene seal and Buna N O-ring on the outside thread. Protection class IP68 up to 5 bar

Cable gland Brass “Perfect" EMC, Metric thread

Exhaust air device EVF, a-collection

Exhaust air device EVF, a-collection

Art. no.: 6520710

An exhaust valve made of plate steel, powder-coated in white, RAL 9010, for ceiling or wall installation. The valve reduces duct and fan noise. Airflow is adjusted by turning the conical piece. Can also be used as a supply duct. Installs directly in the duct; can also be installed with a type VLZ mounting frame.

Transformer RE, Systemair

Transformer RE, Systemair

Art. no.: 6611061

Single-phase fan variator, where the fan speed is controlled by the supply voltage and can be varied in five fixed stages, which are controlled manually with the aid of the switch at the front. The transformer output 230V for control of the damper, electric battery or other external equipment. When the transformer is set to 0, the output is voltage-free. The signal lamp on the front indicates operation. The fuse is reset from outside. REU has a cover of self-extinguishing thermoplastic. Supply voltage: 230V 50/60Hz. Please note! For fans with extended thermal contact, separate motor protection must be used.
Output voltage at the 5-stages

Fire Mat CONLIT FireMat BLACK, Rockwool

Fire Mat CONLIT FireMat BLACK, Rockwool

Art. no.: 19059768

CONLIT Fire Mat is made of non-combustible, moisture and water-repellent ROCKWOOL stone wool. The front has a surface layer of black aluminum foil. The solution also contributes to energy efficiency and noise reduction.

Filter cone

Art. no.: 6630911

The filter material EU3, G85 is a high-accumulating basic filter of the highest class. Has a progressive construction, which means that the tightness of the filter material successively increases through the material in the air flow direction. This prevents surface blockage and gives the filter a high dust-retaining ability and long service life.
Technical data

Stainless Steel Cold Rolled Sheet, EN 10028-7/EN 9444, surface 2B, material EN 1.4301

Stainless Steel Cold Rolled Sheet, EN 10028-7/EN 9444, surface 2B, material EN 1.4301

Art. no.: 4437001

Certificate EN10204-3.1 If a certificate is required it must be requested whilst ordering.
PLEASE NOTE! 8 mm, Hot rolled, surface 1D

Adhesive CONLIT, Rockwool

Adhesive CONLIT, Rockwool

Art. no.: 47220098

Used for glueing of Conlit discs on steel and concrete. Good resistance to short-term moisture effect but should not be used in constant moist environments.
Conlit Glue is a inorganic adhesive that supplied in two types: "Standard" and "Frost. Glue consumption approximately 0,6m2 on flat surfaces. If joints are also to be glued, increase to approximately 0.8 kg/m2. Upon glueing of smaller steel profiles, the corner area and glue consumption is increased to approximately 1 kg/m2

Duct NTO, 1,5 m, with lid, spiral-seamed, ETS

Duct NTO, 1,5 m, with lid, spiral-seamed, ETS

Art. no.: 19058385

Spiral-seamed ventilation ducts. Curved. Dimensions and tolerances (according to European standard - EN 1506). The pipes are made of hot-dip galvanized sheet steel according to EN 10327 with zinc thickness 275 g / m2 (double-sided). This material is suitable for use in environments with corrosivity class C2 according to ISO 9223 and / or environmental class M2 according to HVAC AMA 98. Tolerances Sheet thickness: According to SS-EN 10143 Weight: +/- 10%.
Weight is expressed in kilograms / meter.

Duct NTO, 1,5 m, with lid, spiral-seamed, ETS

Disc valve RKT,FläktGroup

Disc valve RKT,FläktGroup

Art. no.: 6621522

For self-extracting ventilation, both exhaust air and supply air valve. White-painted sheet steel. Screwed for attachment to a wall or channel.

Cleaning Cover NALMH, Uninsulated, ETS

Cleaning Cover NALMH, Uninsulated, ETS

Art. no.: 66642050

Uninsulated clean cover

Roof hood China hat, a-collection

Roof hood China hat, a-collection

Art. no.: 6630101X

Mounting rail MP-800

Mounting rail MP-800

Art. no.: 1116017

Hole clamps. Intended for clamping cable to a wall

Mounting rail MP-800

Flat welding flanges PN 16, EN 1092-1 Type 01 - S235JRG2, ISO

Flat welding flanges PN 16, EN 1092-1 Type 01 - S235JRG2, ISO

Art. no.: 1427145

Dimensions in mm.

Exhaust air device AFDO, a-collection

Exhaust air device AFDO, a-collection

Art. no.: 6620806X

An exhaust valve for ventilation installations requiring low noise even at high pressure drop. Made of sheet steel and electrostatically coated with white epoxy paint. The valve is equipped with a foam rubber ring that seals against the frame. Mounted with mounting frame of type KKT

Nipple NI, ETS

Art. no.: 66640510

Inner coupling for wire conduit.

Stainless Steel Sheet Format 1000mm 1.4301 2B

Stainless Steel Sheet Format 1000mm 1.4301 2B

Art. no.: 19059816

Quality 1.4301. Sold per kg. The weight refers to nominal values. Quantity may be changed upon delivery and invoicing.

Roof Fan TFSR, Systemair

Roof Fan TFSR, Systemair

Art. no.: 6610972

TFSR is a series of ceiling fans that have a circular base frame with single-suction radial fans equipped with backward-curved blades and maintenance-free outer rotor motors. The fans are foldable and equipped with service switches for easy cleaning and service and 1m electrical cable for connection to junction box. To protect the motor from overheating, the fans have impedance-protected motors. TFSR is screwed to the TOB / TOS roof bushing and then connected to the TOB / TOS junction box.The fans are made of galvanized sheet steel, powder coated.TFSR 125-160 is supplied with Ø 160 inlet pipe TFSR 200-315 with Ø 200. To avoid problems, we recommend that the fan runs continuously • Swing-out • Voltage adjustable • Easy to install • Maintenance-free and reliable
Black = RAL 9005
Red = RAL 8004

Circular Silencer BDER-30, FläktGroup

Circular Silencer BDER-30, FläktGroup

Art. no.: 6643213

Fire-rated E60, EI30 according to type-approval 2525/80.
Description
Straight silencer with 50mm stone wool filling. The silencer consists of a pipe of perforated sheet metal, surrounded by sheet metal end caps and jacket. The space between the pipe and the jacket is filled with sound-absorbing material with fibre cloth to protect against fibre migration. Supplied with dust-proof connectors.

Rectangular Silencer with Circular Connection NTF, ETS

Rectangular Silencer with Circular Connection NTF, ETS

Art. no.: 19055299

Round silencer with 50 mm insulation. The sound absorption material of the NRF silencer consists of mineral wool. The perforated inner tube and outer casing are made of galvanized steel. There is fabric between the inner tube and the insulation to prevent wool particles from the duct system. The products are suitable for use in the corrosivity categories C1 to C3 according to ISO 9223: 2012.

Roof Fan TFC S, Systemair

Roof Fan TFC S, Systemair

Art. no.: 66431007

TFC is a ceiling fan intended for residential and commercial properties. It has energy-efficient EC fans with the option of demand control. TFC has a simple and ergonomic" swing-out "function that facilitates maintenance. Available in the colors black and red.
TFC is available in two variants:
The S variant has a potentiometer as standard, which makes it possible to control the fan speed steplessly from 0 - 100%. This is a simple solution when no demand control is required.
The P variant has variable airflow (VAV) pressure control with outdoor compensation as standard, but is prepared for and can easily be converted to constant airflow (CAV).
Advantages of TFC: • Easily accessible safety switch on the outside of the housing • High efficiency EC motors • Lower energy consumption results in lower energy costs • 100% speed adjustable • Demand-controlled ventilation - easy to adjust the ventilation to the actual need • Low noise level thanks to insulated housing
Color code: Black = RAL 9005 Red = RAL 8004 Corrosivity class C4

Kitchen and ventilation hose, KF 6.0m, Rec Indovent

Kitchen and ventilation hose, KF 6.0m, Rec Indovent

Art. no.: 6630533

Type-approved as a connection between the kitchen fan / cooker hood and kitchen flue in addition to the air device and ventilation duct. PVC-coated glass fibre cloth and completely imbedded steel spiral. Temperature range: -5° C to +90° C.

Supply air diffuser CDDb, Swegon

Supply air diffuser CDDb, Swegon

Art. no.: 6621000

CDDb is a circular, perforated supply air terminal for placement on the ceiling. The device is white lacquered. The terminal can be supplemented by the ALSc plenum box.
The terminal can be used as an exhaust air terminal. Max air volume is specified as 30 dBa, 50 Pa with 360º diffusion.

Pipe Section 800 Multi 40mm, Rockwool

Pipe Section 800 Multi 40mm, Rockwool

Art. no.: 19058080

ROCKWOOL 800 multi pipe section is a bowl with a unique inner core that makes a pipe bowl fit several dimensions. ROCKWOOL 800 MULTI is a shape-retaining pipe bowl made of non-combustible, moisture- and water-repellent ROCKWOOL stone wool. It has a good compressive strength and dimensional stability, which provides a good base for cladding. The tube bowl is coated with reinforced aluminum foil that has an overlap with self-adhesive tape. The tube bowl is completely glued. The pipe bowl's area of use is mainly for heat, condensation and fire insulation both in industry and plumbing. It has an effective insulating ability and also works at high temperatures. The product is spiral wound with galvanized steel wire. Max service temperature on wool side 250°C, max use temperature surface layer 80°C.

Thermal conductivity (λ value) 0.037 at 50°C.

LED Warning Light Puck, Cellite

LED Warning Light Puck, Cellite

Art. no.: 7504296

LED Warning light Puck for floor mounting. 12-30 V Orange.

Outer wall cover ABC-CEO, ABC Vent

Outer wall cover ABC-CEO, ABC Vent

Art. no.: 19050411

Outer wall cover ABC-CEO, ABC Vent

Rectangular Silencer with Circular Conn. CLA-A, Swegon

Rectangular Silencer with Circular Conn. CLA-A, Swegon

Art. no.: 6543722

Compact silencer CLA-A (for circular ducts) is a rectangular silencer with a circular connection that has a low construction height. The new CLA is an industrially designed product adapted to very good sound attenuation and ease of installation. CLA is manufactured as standard in galvanized sheet steel. Connection sockets are fitted with rubber seals. Type approved in tightness class D. Fire class is met by protective distance. CLA-A is type approved (TG SC0478-18) with regard to fire protection class E120. EI30, EI60 and EI120 are achieved provided that the protection distance is met.

Channel sensor TG-K... NTC, Regin

Channel sensor TG-K... NTC, Regin

Art. no.: 6631419

Duct sensor of type NTC for measuring air temperature in ventilation ducts.

Filter box FGR, Systemair

Filter box FGR, Systemair

Art. no.: 6630927

Made of galvanised sheet steel. The FLF can be equipped with three different bag filters in the following filter classes: G4, F5 and F7. (Filter sold separately).

Supply air diffuser DCR, Klimatbyrån

Supply air diffuser DCR, Klimatbyrån

Art. no.: 6520501

Air supply diffuser, with most types of nozzles for the premises where a flexible spreading pattern is desired. The tool is mounted as standard in the cleanable connection box type TK containing measuring tubes and adjustment damper.
DCR is supplied with tangential spread if nothing is specified in the order. Max. recommended lower temperature is 12 ºC. DCR can also be used without the connection box. Adjustment may then be done with a separate dampers.
The frame is made of powder-coated steel, white colour RAL9003. ABS plastic nozzles.

Metal Hose RE-Flex Drasuten, Rec Indovent

Metal Hose RE-Flex Drasuten, Rec Indovent

Art. no.: 6630517

Practical connection between ventilation duct and terminal.
Flexible connection hose with factory-assembled sleeves with push-on dimension. Temperature range max +200°C.
Made of corrugated, folded aluminium band. Type-approved.

Smoke damper RABC, Bevent Rasch

Smoke damper RABC, Bevent Rasch

Art. no.: 6542880

Circular smoke damper, available in sizes from 100 mm to 630 mm. Fire class E60/E120S. Equipped with 24V safety actuator and thermal sensor. Closed when power is off.
For installation in horizontal or vertical ducts. P and CE certified.

Circular Silencer BDER-60, FläktGroup

Circular Silencer BDER-60, FläktGroup

Art. no.: 6643397

Fire-rated E60, EI30, EI60 according to type-approval 2525/80.
Description
Straight silencer with 100mm stone wool filling. The silencer consists of a pipe of perforated sheet metal, surrounded by sheet metal end caps and jacket. The space between the pipe and the jacket is filled with sound-absorbing material with fibre cloth to protect against fibre migration. Supplied with dust-proof connectors.

Dimensional change BDED-3, Concentric (Nipple-Nipple), FläktGroup

Dimensional change BDED-3, Concentric (Nipple-Nipple), FläktGroup

Art. no.: 6641811

Concentric, push in-push in.

Filter Residence VTR 300 Kit, Systemair

Filter Residence VTR 300 Kit, Systemair

Art. no.: 19057395

Showing 52 of 39340