Order lines: 0

Ahlsell Products Electric Telecoms, Data, Security 50-63 50 Telecoms and Fibre optic Fiber box - ODFFiber boxes/Panels 19"

Fiber boxes/Panels 19"

Do you work with Telecom, Data, or security? Ahlsell helps you find the products within security and integration. Whether you work in electrical engineering, burglar alarms, or access systems, we have the range you need. Here you will find fiber optics, telephony, antenna material, and power supply for installation, along with smart solutions from major suppliers. Explore our wide selection here in the online store or visit your nearest Ahlsell store.

Fibre panel ODF, Eurolan

Fibre panel ODF, Eurolan

Art. no.: 5057975

ODF 24xSCD 19 Unequipped is a fibre optic terminal block for 19" assembly on 1 HE. ODFen has hole spacing for 24 x SC duplex or 24 x LC-quad adapters for panel mounting, with snap fixture.
ODFen is extractable to facilitate installation, cleaning and troubleshooting, and is easily pulled out after loosening two thumbscrews on the front side. In pulled-out position, full accessibility is given to the splice and distribution bay. ODFen is equipped inside with a M4 screw pin with a thumb nut for easy assembly of accessories, splice cassettes and similar, as well as 4 x self-adhesive cable holders for organising fibre loops. Alternatively, the block can be equipped with our self-adhesive smouv holder, which gives a complete and affordable solution for installation of pigtails (pre-assembled fibre pigtails) in ODFen. ODFen is made of powder-coated sheet steel and meets the RoHS directive. Eurolan Dust caps are used as ODF blind plugs for non-used holes. The Eurolan FO sleeve is a 45/60 mm protective sleeve for fibre splices.

Fiber panel ODF 24xLCD 19" 1HE Black, Eurolan

Fiber panel ODF 24xLCD 19" 1HE Black, Eurolan

Art. no.: 5055300

Eurolan fiber panel (ODF) in 19" version. Space for 24 SC simplex or 24 2xLC spacers. Prepared for cable shelf e-nr 5055301. Pull-out to simplify installation, cleaning and troubleshooting and is easily pulled out after loosening two thumb screws on the front. The ODF comes with: 2 splicing cassettes, 24 fastfit adapters for better stability of intermediate pieces, 48 screws for fixing intermediate pieces, M6 screws, 1 pc PG13.5, 1 pc PG16, 6 pcs self-adhesive cable holders for arranging fiber loops and 4 cable ties.

Fibre panel ODF LightMate 1u Fixed SC, TD Fiberoptik

Hexatronic Fiberoptic

Fibre panel ODF LightMate 1u Fixed SC, TD Fiberoptik

Art. no.: 5057836

ODF for 19" stand
Height 1u, depth 250 mm.
Lacquered steel plate with corrosion-proof front. Colour coral white, structural lacquer
Cable diameter 5-18 mm.
Optional cable entry, left or right side.
The front is 30 mm recessed from the mounting point of the box - allows greater bend radius for the patch cable.
Installation kit shall be ordered separately.

Fibre panel ODF Lightmate 1HE 19", TD Fiberoptik

Hexatronic Fiberoptic

Fibre panel ODF Lightmate 1HE 19", TD Fiberoptik

Art. no.: 5057826

Extractable ODF for 19" mechanism with lowered front. Supplied complete with splice holder and fibre control.
Weight: 5 kg
Cable: max 19 mm, left or right intake
Front: Free-hanging, extractable 130 mm
Material: Sheet steel with stainless steel front.
Surface treatment: Textured lacquer, coral white
Other: Complete with splice holder for single and ribbon, fibre holder and holder for fan out sleeves.

Fiber panel ODF LightMate 19" 24xSC D for blow fiber / micro cable for 3, 5 and 7mm 1U

Hexatronic Fiberoptic

Fiber panel ODF LightMate 19" 24xSC D for blow fiber / micro cable for 3, 5 and 7mm 1U

Art. no.: 5055299

Extendable ODF unit with complete interior for splicing and fiber looping. For up to 48 SC connectors. Holder for micro products can be replaced, it is mounted with 2 nuts. Mounted holder 5mm for 48 micro products. Packaged holders: 3mm comb for 100 micro products and 7mm comb for 28 micro products

Termination box/Joint box T405, Tykoflex

Termination box/Joint box T405, Tykoflex

Art. no.: 5084442

ODF 19" T405 termination block/splice box supplied with with extractable front block and detachable cover enables easy inlaying of fibres and cleaning of contacts. The box has a front panel for different types of connections, SC, FC, ST etc. When splicing the box is armed with one or two multi cassettes which are ordered separately. 192 fibres maximum can be terminated and when laying 96-192 fibres the fibre pulling is well protected via inlets in the bottom of each unit.

Fibre panel ODF KB112, Nexans

Fibre panel ODF KB112, Nexans

Art. no.: 5025883

Fibre optic distribution frame boxes of type KB112 are designed for 48 fibres, but up to 4 x KB112 boxes can be assembled together. This makes it possible to install max. 192 fibres by taking off the cover/bottom of the boxes and using installation brackets KB112.
In each KB112, up to 4 cassettes (8 splice holders) are used, which corresponds to 48 fibre splices. KB112 can be assembled in a stand/cabinet with a min. depth of 400 mm. Panel plate is sold separately.

Fibre panel ODF Lightmate 2u 96 SC, TD Fiberoptik

Hexatronic Fiberoptic

Fibre panel ODF Lightmate 2u 96 SC, TD Fiberoptik

Art. no.: 5057840

Retractable ODF for 19" mechanism with lowered front. Complete with splice holder for single and ribbon fibre holder and holder for fan-out sleeves.

Plug: 48 x SC duplex
Cable: max 19 mm, to the right or to the left.
Front: Free-hanging, extractable 130 mm
Material: Sheet steel with stainless steel front
Surface treatment: Textured lacquer, coral white

Fibre panel ODF Lightmate 4u 192 SC, TD Fiberoptik

Hexatronic Fiberoptic

Fibre panel ODF Lightmate 4u 192 SC, TD Fiberoptik

Art. no.: 5057842

Retractable ODF for 19" mechanism with lowered front. Supplied complete with splice holder and fibre control.

Plug: 96 x SC Duplex
Cable: max 19 mm, to the right or to the left.
Front: 2 x individually extractable free-hanging, extendable 130 mm
Material: Sheet steel with stainless steel fronts.
Surface treatment: Textured lacquer, coral white
Other: Complete with splice holder for single and ribbon fibre holder and holder for fan-out sleeves.

Fibre panel ODF Lightmate 2u 192 LC/MTRJ, TD Fiberoptik

Hexatronic Fiberoptic

Fibre panel ODF Lightmate 2u 192 LC/MTRJ, TD Fiberoptik

Art. no.: 5058086

Retractable ODF for 19" mechanism with lowered front. Complete with splice holder for single and ribbon fibre holder and holder for fan-out sleeves.

Plug: 96 x LC Quad
Cable: max 19 mm, to the right or to the left.
Front: Free-hanging, extractable 130 mm
Material: Sheet steel with stainless steel front
Surface treatment: Textured lacquer, coral white

Fibre panel ODF-unit 19" SC, Nexans

Fibre panel ODF-unit 19" SC, Nexans

Art. no.: 5055093

Nexan’s ODF unit 19" SC is supplied complete with panel plate, cable fastening and splice holder for termination of fibre optic cable. The product builds 3U 19" and is suited to SC duplex intermediate pieces.

Fibre panel ODF-unit 19" SC, Nexans

Fibre panel ODF 19" 1HE 24XSC Simplex, Eurolan

Fibre panel ODF 19" 1HE 24XSC Simplex, Eurolan

Art. no.: 5057977

Extractable fibre box with hole image for 24 pcs SC simplex or 24 pcs LC duplex

Fiber panel ODF 19" 1HE 24XSCD, Eurolan

Fiber panel ODF 19" 1HE 24XSCD, Eurolan

Art. no.: 5057978

Eurolan blown fiber panel (ODF) in 19" version. Space for 24 pcs SC duplex or 24 pcs 4xLC spacers. Pull-out for ease of installation, cleaning and troubleshooting and easily pulls out after loosening two thumb screws on the front. The ODF is equipped inside with an M4 screw stud with a thumb nut for easy mounting of accessories and 4 self-adhesive cable holders for arranging fiber loops.

Fiber panel ODF LM-5383, Hexatronic

Hexatronic Fiberoptic

Fiber panel ODF LM-5383, Hexatronic

Art. no.: 5055036

Extendable ODF for 19 "mechanics with recessed front. 12xSC duplex. Complete with splice holder and fiber guide

Fiber panel 19 "48xSC duplex, Eurolan

Fiber panel 19 "48xSC duplex, Eurolan

Art. no.: 5055193

Eurolan fiber panel (ODF) in 19 "design. Space for 48 SC duplex or 48 4xLC adapters. 2 HE. Extendable for simplification during installation, cleaning and troubleshooting and is easily pulled out after loosening two thumb screws on the front. ODF: one is equipped inside with an M4 screw pin with thumb nut for easy mounting of accessories (splice cassettes and the like), and 4 self-adhesive cable holders for shunting fiber loops.

Fiber panel 19" 24XSC Pivot

Fiber panel 19" 24XSC Pivot

Art. no.: 9871580

Fiber panel 19" 24XSC Pivot

Kassette MPO MM OM4 Crossed, Eurolan

Kassette MPO MM OM4 Crossed, Eurolan

Art. no.: 5062241

Kassette MPO MM OM4 Crossed.

Cassette MM MPO OM4 Straight, Eurolan

Cassette MM MPO OM4 Straight, Eurolan

Art. no.: 5062298

Cassette MM MPO OM4 Straight.

Showing 18 of 18