Order lines: 0

Ahlsell Products Electric Mains power supply equipment 06-09 07 Wiring cabinets and accessories Cable splice12 kV

12 kV

Ahlsell helps you find power grid materials for all of your assignments. Here you will find cable cabinets and accessories for a safe and smooth professional installation. In your job, customers want work to finalize projects fast as the power supply is a vital part of our society. The electricity grid is like a train track, where we transport the necessary electricity to households and businesses that need it. You need different types of specialist grid materials for a safe and stable electricity grid. We offer products such as earthing & lightning protection, joint sleeves, street lighting cabinets, and other specialist equipment. In our wide range of products, you will find products from several major suppliers. You can explore our wide range of electricity grid materials and accessories in our online store or visit your nearest Ahlsell shop.

Cable joint 12kV, MXSU 1-wire

TE Connectivity/Raychem

Cable joint 12kV, MXSU 1-wire

Art. no.: 0716030

Use: For splicing Earth cable, 1-wire 12kV. PLEASE NOTE! The splices allow jacket testing.
Standard: CENELEC HD 629.1.S1, IEC 61238–1 (splice sleeve).
Design: Inner and outer sleeves are expanded so that they can be applied and then heat-shrunk. The lines are spliced with the supplied screw splicing casings, which include an integrated element in the screws, and which detach when the required torque is achieved. After cable preparation, fold a field-control cloth above the splicing sleeve and the tubes are shrunk in order to achieve field control and full insulation. The shield wires are spliced with supplied screw splice sleeves.
Set contents: The set contains equipment for 1 wire.

Hybrid joint 12kV, CSJH

Hybrid joint 12kV, CSJH

Art. no.: 0716231

Cable splice for round plastic insulated 3-conductor cable. Hybrid joint consisting of cold shrink body spread on spiral with integrated field control (geometric) and insulation for each conductor and outer hose of thick-walled heat shrink tubing for mechanical protection and moisture sealing. The joint is adapted to the supplied screw joint sleeves with break skull. Screw joint sleeve for screen included.

Cable joint 12kV, MXSU 3-wire

TE Connectivity/Raychem

Cable joint 12kV, MXSU 3-wire

Art. no.: 0716038

Use: For splicing Earth cable, 3-wires 12kV.
PLEASE NOTE! The splices allow jacket testing.
Standard: CENELEC HD 629.1.S1, IEC 61238–1 (splice sleeve).
Design: Inner and outer sleeves are expanded so that they can be applied and then heat-shrunk. The lines are spliced with the supplied screw splicing casings, which include an integrated element in the screws, and which detach when the required torque is achieved. After cable preparation, fold a field-control cloth above the splicing sleeve and the tubes are shrunk in order to achieve field control and full insulation. The shield wires are spliced with supplied screw splice sleeves.
Set contents: The 3-wire set contains equipment for 3 x phases.

Cable joint 12kV, MXSU adapter

TE Connectivity/Raychem

Cable joint 12kV, MXSU adapter

Art. no.: 0716340

Use: Transition splice, paper insulated 3-wire cable to plastic insulated 3 and 1 wire cable. The set contains material splicing with 3 and 1 wire cables.
Standard: CENELEC HD 629.1.S1, IEC 61238–1 (splice sleeve).
Design: The splice comes complete with screw splice sleeves for wires and sheath. Oil barrier tubes, mastic, conductor tubes and breakouts are used in order to prepare the paper cable to make it resemble a plastic cable. The wires are spliced using the supplied splice sleeves, which have screw heads that come off at the right torque. The splice sleeves have partitions and are intended for both aluminium and copper wires. Mastic is wound above the splice sleeves. Field control heat-shrink tubing and screened insulation tubes supplement the phase insulation. A fabric-reinforced folding sleeve is used as outer jacket.

Cable joint 12kV, MXSU 3-wire Reparation

TE Connectivity/Raychem

Cable joint 12kV, MXSU 3-wire Reparation

Art. no.: 0716025

Use: For repair of plastic insulated earthed cable, 3–wire 12kV.
PLEASE NOTE! The splices allow jacket testing.
Standard: CENELEC HD 629.1.S1, IEC 61238–1 (splice sleeve).
Design: Inner and outer sleeves are expanded so that they can be applied and then
heat-shrunk. The supplied screw splice sleeves are 440 mm long and replace approx. 300 mm of the damaged
wire. The screw splice sleeves have built-in torque as the screws and come off when the right torque
is achieved. After cable preparation, a field control cloth is folded above the splice sleeve in order to achieve
field control and full insulation. The shield wires are spliced with supplied screw splice sleeves.
Set contents: The set is complete, including screw splice sleeves. The set contains materials for 3 phases.

Cable joint 12kV, SXSU 3-wire cable

TE Connectivity/Raychem

Cable joint 12kV, SXSU 3-wire cable

Art. no.: 0716850

Use: For splicing of plastic-insulated earthed cable, 3-wire 12KV.
PLEASE NOTE! The splices allow jacket testing.
Standard: CENELEC HD 629.1.
Set contents: The hose set consists of Hoses for field control, insulation with an outer conductive layer, cover insulation hoses and installation accessories, excluding splice sleeves.
PLEASE NOTE! The splice is only approved for crimping.

Cable joint HJ33 12kV

Cable joint HJ33 12kV

Art. no.: 0719950

Cable joint designed for all PEX and plastic-insulated 3-wire cables with strippable or permanent outer conductive layer, 12 kV. The cable joint come in complete sets for 3-phase, required insulation and field-controlling shrink tubes, mastic, sealing strips and installation instructions. Including screw joint sleeves.

CJH33 hybrid joint kits for PEX-insulated cable 3 leads with heat-shrink jacket

CJH33 hybrid joint kits for PEX-insulated cable 3 leads with heat-shrink jacket

Art. no.: 0720021

This set is used for splicing max. 24 kV cables with PEX insulation and copper screen. The kit is suitable for round 3-wire cables, containing the components for all three phases.

Cable joint 12kV incl. TT-set

Cable joint 12kV incl. TT-set

Art. no.: 0702168

Cable splice designed for PEX-insulated circular and sector-shaped 3-wire cables 12 kV. The cable joints are supplied in complete kits for 3-phase, required insulation and field-controlling shrink tubing, mastic, sealing tape, TT-kit and mounting instructions.
Including screw joint sleeves.

cable splice hybrid 150-240 12KV, incl TT

cable splice hybrid 150-240 12KV, incl TT

Art. no.: 0702839

Cable splice intended for PEX-insulated round 3-wire cables max 12 kV. Cable splice intended for PEX-insulated round 3-wire cables max 12 kV. The cable splices are delivered in complete sets with the required cold shrink insulation, mastic, tape, cleaning material, copper mesh, and an outer sheath in heat shrink. Including screw joint sleeves with break head and TT kit

Cable splice for PEX-insulated 3-wire cables, Al / Cu, 12kV

Cable splice for PEX-insulated 3-wire cables, Al / Cu, 12kV

Art. no.: 0702651

Cable splice intended for PEX-insulated round 3-wire cables max 12 kV. The cable splices are delivered in complete sets with the required cold shrink insulation, mastic, tape, cleaning material, copper mesh, and an outer sheath in heat shrink. Including screw joint sleeves with break head.

Cable joint paper-plastic 12kV

Cable joint paper-plastic 12kV

Art. no.: 0702569

Cable joint heat shrink 3-conductor (Transition joint) Paper-Plastic, complete with screw joint sleeves.

Cable splice 50-95 mm², 3-wire, 12kV

Cable splice 50-95 mm², 3-wire, 12kV

Art. no.: 0702490

cable splice 12kv, 50-95 mm², 3-wire pex cable with al / cu screen cold shrink / hybrid including splice sleeves.

Showing 13 of 13