Order lines: 0

Ahlsell Products Electric Installation equipment 11-18 15 Fixing equipmentCable clamp

Cable clamp

Vi på Ahlsell hjälper dig hitta fästningsmateriel för alla dina jobb inom el. Hos oss hittar du allt du behöver för att säkra dina installationer – från ledningsklammer och verktyg för ledningsklammer till olika typer av plugg och fästsystem. Vi erbjuder även universalfästen för korrugerade plåttak, balkklammer, och olika typer av upphängningssystem. Om du behöver buntband, installationsband, montageplattor för innertak, kabelhållare eller ankarskenor, så hittar du även detta. Skulle du inte hitta det du söker efter på just den här sidan så finner du mer fästmateriel under kategorin Infästning.

Nail-in clamps TC for round cables

Schneider Electric

Nail-in clamps TC for round cables

Art. no.: 1500121

Clips type TC with zinc-electroplated, hardened steel nail for laying round cables.

Nail-in clamps TC for round cables

Nail-in clamps TC for round cables

Nail-in clamps TC for round cables

Nail-in clamps TC for round cables

Nail-in clamps TC for round cables

Earth cable clamp for one cable, two fixing holes

Earth cable clamp for one cable, two fixing holes

Art. no.: 1504800

Ground cable clamp for one wire, two mounting holes.

Screw clamp JR for two cables

Screw clamp JR for two cables

Art. no.: 1504636

JR Staples are made of genuine stainless steel and drummed to minimize all sharp edges. All staples have oval holes that facilitate straight-looking assembly. JR206-JR222 has two screw holes per clamp and holds two cables.

Screw clamp JR for one cable, one fastening hole

Screw clamp JR for one cable, one fastening hole

Art. no.: 1504796

Made of stainless steel.

Screw clamp JR for one cable, one fastening hole

Screw clamp JR for one cable, one fastening hole

Art. no.: 1504604

Made of stainless steel.

Plug clamp PCN Nelco

Plug clamp PCN Nelco

Art. no.: 1500866

Combined clamp, plastic plug and fastening nail or screw. The nail variant has a hardened steel nail which does not bend or loosen. The design with drive screw has a screw head provided with combi head for both cross- and slot-head. The plug is intended for a 5.5 mm drill. Plug length 23 mm.

Plug clamp PCN Nelco

Plug clamp PCN Nelco

Plug clamp PCN Nelco

Screw clamp TK for one cable

Schneider Electric

Screw clamp TK for one cable

Art. no.: 1504016

Screw clamps of white polypropylene for laying round cables. Depending on the base, nail plugs or screws are recommended for fastening.

Screw clamp TCS-C3 SECOR

Schneider Electric

Screw clamp TCS-C3 SECOR

Art. no.: 1504169

Screw clips for round cables, PH2. Suitable for mounting directly in double plaster, wood, wood fibre material and light concrete with a screw plug. Can also be mounted directly on hard materials such as concrete in a pre-drilled 4.0 mm hole. Can cope with an environmental type C3 (outdoor).

Screw clamp TCS-C3 SECOR

Screw clamp TCS-C3 SECOR

Screw clamp TCS-X-C3 SECOR with Torx T20-slot

Schneider Electric

Screw clamp TCS-X-C3 SECOR with Torx T20-slot

Art. no.: 1504180

Clips for round cables with pre-assembled screws made of tempered steel with a surface coating of iron/zinc to cope with corrosion Class C3. Strong screw with a sharp point and a T20 track. Suitable for mounting directly on double plaster, wood and composite plywood and light concrete with a screw plug. The product is used for clamping of PVC pipe 16 and 20 mm inside the drywall with two layers of 13 mm plasterboard. TCS-X-C3 SECOR with T20-screw is suitable for use in hard material such as hardwoods and can be installed directly into the concrete using an pre-drilled 4.0 mm hole, without plug. Can cope with an environmental type C3 (outdoor).

Nail-in clamps white SC, Sormat

Nail-in clamps white SC, Sormat

Art. no.: 1500978

Nail clamps SC are for fixing cables, pipes and other objects. SC is made of polypropylene, which makes the clip flexible and shockproof. SC can withstand different temperature conditions and withstands most chemicals. Due to its flexibility, one size can handle several cable dimensions. SC is also very easy to press on the cable. The clip is fitted with a hardened steel nail that is galvanized. The nail means that the SC clamp can also be used in very hard woods.

Nail-in clamps white SC, Sormat

Nail-in clamps TC for flat cables

Schneider Electric

Nail-in clamps TC for flat cables

Art. no.: 1500001

Made of elastic polypropylene. With zinc-coated steel nail.

Screw clamp TK adjustable, for 2-5 cables

Schneider Electric

Screw clamp TK adjustable, for 2-5 cables

Art. no.: 1504201

For screw mounting of several parallel cables.

Nail-in clamps Clips TC-C4 SECOR

Schneider Electric

Nail-in clamps Clips TC-C4 SECOR

Art. no.: 1500541

Clips type TC for laying round standard cables. The steel nail is hardened and acid-resistant/stainless. The surface treatment is classified for use in demanding environments. The plastic on the clamp has a reinforced UV-protection, which makes the plastic manage outdoor use.
Corr. class C4, plastic PP

Letti staples electro-galvanised zinc with white plastic coating

Letti staples electro-galvanised zinc with white plastic coating

Art. no.: 1501701

Zinc-electroplated, two-legged clamps for secure attachment of cable and wiring. Rilsan plastic-coated design. Rilsan plastic is a material with high resistance to mineral salts, alkalis, most solvents and organic acids

Letti staples with two legs, electro-galvanised zinc

Letti staples with two legs, electro-galvanised zinc

Art. no.: 1501715

Zinc-electroplated, two-legged clamps for secure attachment of cables and wiring. Letti is also available in Rilsan plastic-coated design. Rilsan plastic is a material with high resistance to mineral salts, alkalis, most solvents and organic acids

Letti staples with two legs, electro-galvanised zinc

Letti staples with two legs, electro-galvanised zinc

Letti staples with one leg, electro-galvanised zinc and plastic-coated

Letti staples with one leg, electro-galvanised zinc and plastic-coated

Art. no.: 1501719

Zinc-electroplated, one-legged clamps for secure attachment of cable and wiring. Rilsan plastic-coated design. Rilsan plastic is a material with high resistance to mineral salts, alkalis, most solvents and organic acids. Tool for 8 mm Letti also works with this 7 mm clamp.

Letti staples with one leg, electro-galvanised zinc and plastic-coated

Letti staples with one leg, electro-galvanised zinc and plastic-coated

Letti staples with one leg, electro-galvanised zinc and plastic-coated

Letti staples with one leg, electro-galvanised zinc and plastic-coated

Letti staples with one leg, electro-galvanised zinc and plastic-coated

Anchor bracket TA

Anchor bracket TA

Art. no.: 1500213

Support anchor for cable and pipe bracket type TB

Anchor bracket TA

Cable bracket DKS for single cables/pipes or bundles

Cable bracket DKS for single cables/pipes or bundles

Art. no.: 1500270

Quick method for fastening cables to concrete etc. Pre-drill a Ø 6 mm hole and press in the attachment. No plug is needed.

Fixing plug DSN

Fixing plug DSN

Art. no.: 1500882

Plug and screw in one unit. Attaches channels with just a touch of a finger. The plug can also attach roof and wall boxes where there are not large loads by attaching the box to the well with the bracket.

Fixing plug DSN

Pipe bracket AKS

Pipe bracket AKS

Art. no.: 1500888

Quick method for fastening cables to concrete etc. Pre-drill a Ø 6 mm hole and press in the attachment. No plug is needed.

Pipe bracket EC gray, suitable for side-by-side assembly

Pipe bracket EC gray, suitable for side-by-side assembly

Art. no.: 1500894

Quick method for fastening cables to concrete etc. Pre-drill a Ø 6 mm hole and press in the attachment. No plug is needed.

Screw clamp JR for three cables

Screw clamp JR for three cables

Art. no.: 1504678

JR Staples are made of genuine stainless steel and drummed to minimize all sharp edges. All staples have oval holes that facilitate straight-looking assembly. JR306-JR322 has two screw holes per clamp and holds three cables.

Screw clamp APL, Black

Screw clamp APL, Black

Art. no.: 1506031

APL Staples are made of galvanized steel which is then powder coated in a black color. Perfect for clamping pipes with.

Screw clamp AP, galvanised

Screw clamp AP, galvanised

Art. no.: 1506041

AP Staples are made of hot-dip galvanized steel and are excellent for clamping VP pipes with.

Plug clamp PCS

Art. no.: 1500880

PCS series: Design with drive screw where the screw head is supplied with combi head for both cross-and slot-head screw driver

Letti magazine incl staples

Letti magazine incl staples

Art. no.: 1501780

Galvanized one-legged clamp (for bracket magazine tool) for secure attachment of cable and wiring. in Rilsan plastic-coated design. Rilsan plastic is a material with high resistance to mineral salts, alkalis, most solvents and organic acids

Letti staples Electro-galvanised zinc. With two legs for flex tubes

Letti staples Electro-galvanised zinc. With two legs for flex tubes

Art. no.: 1501716

Galvanized two-legged clamps for secure attachment of flex hose. Letti is also available in Rilsan plastic-coated design. Rilsan plastic is a material with high resistance to mineral salts, alkalis, most solvents and

Letti staples Electro-galvanised zinc. With two legs for flex tubes

Nail-in clamps Letti Falu red two leg

Nail-in clamps Letti Falu red two leg

Art. no.: 1501705

Zinc-electroplated, two-legged clamps for secure attachment of cables and wiring. Letti is also available in Rilsan plastic-coated design. Rilsan plastic is a material with high resistance to mineral salts, alkalis, most solvents and organic acids

Letti staples electro-galvanised zinc with black plastic coating

Letti staples electro-galvanised zinc with black plastic coating

Art. no.: 1501751

Galvanized two-legged clamps for secure attachment of cable and cable with grooved plastic coated design. Rilsan plastic is a material with good resistance to mineral salts, alkalis, most solvents and organic acids

Plug clamp DPCN Nelco

Plug clamp DPCN Nelco

Art. no.: 1500871

Combined clamp, plastic plug and fastening nail or screw. The nail variant has a hardened steel nail which does not bend or loosen. The design with drive screw has a screw head provided with combi head for both cross- and slot-head. The plug is intended for a 5.5 mm drill. Plug length 23 mm.

Lightweight wall brackets

Lightweight wall brackets

Art. no.: 1500002

Galvanized staple for concrete, brick and plaster with built-in expander. Drill a 30 mm deep hole with a 6 mm drill. Hit the clamp directly into the hole without a plug. Available for 16 and 20 mm pipes.

Lightweight plaster clips

Lightweight plaster clips

Art. no.: 1501757

Staples intended for plaster with two legs, galvanized and plastic coated.

Cable / pipe bridge TB

Cable / pipe bridge TB

Art. no.: 1500215

Fasteners in halogen- and corrosion-free UV-resistant polyamide for mounting cables, cable bundles or pipes on walls and concrete. The same mounting method for all products; drill a hole Ø 6 mm and push in the plug part. Holds for 40 kg per fastening point, ambient temperature -20 ° C to + 80 ° C, no plug, no screw, up to 5 times faster than traditional fastening material.

Plug clamps PC

Art. no.: 1501214

Tillex Plug Clips / Plug Clamps are made of impact-resistant elastic Polypropylene which is halogen-free and UV-resistant in high quality from the factory in Denmark. Quick and easy installation for round cables 8-12mm with plug 21mm in the color White. Galvanized hardened steel nail 2.0x35mm. Used in Wall, Concrete, Lightweight concrete, Lightweight tiles etc. Mount in pre-drilled holes 5.5-6mm and drive in the nail. Corrosivity class C4 which provides a high level of outdoor protection.

Nail clamps C white

Nail clamps C white

Art. no.: 1501520

Tillex Spikclips are made of impact-resistant elastic Polypropylene which is halogen-free and UV-resistant in high quality from the factory in Denmark. For round cables 3-5mm in the color Natur. Galvanized hardened steel nail 1.2x16mm. Used directly in most materials. In single plaster, concrete, brick and lightweight concrete together with Tillex clip plug. Corrosivity class C4 which provides a high level of outdoor protection.

Nail clamps C white

Nail clamps C white

Nail clamps C white

Nail clamps C white

Nail clamps C white

Screw clamps SC

Screw clamps SC

Art. no.: 1504308

Tillex screw clips are impact-resistant elastic polypropylene that is halogen-free and UV-resistant in high quality from the factory in Denmark. For round cables 7-10mm in the color White. Strong screw 5x33mm, which makes it suitable for mounting directly in double plaster - if the screw is tightened, a yellow plug fits in the hole that has arisen. In concrete and brick, the screw is attached directly to a 4mm hole without a plug. Equipped with Philips cross groove PH2 (Also available with Torx T20). Corrosivity class C4 which provides a high level of outdoor protection.

Screw clamps SC

Screw clamps SC

Screw clamps SC

Screw clamps SC

Screw clamps SC

Nail clamps C black

Nail clamps C black

Art. no.: 1501538

Tillex Spikclips are made of impact-resistant elastic Polypropylene which is halogen-free and UV-resistant in high quality from the factory in Denmark. For round cables 3-5mm in the color Natur. Galvanized hardened steel nail 1.2x16mm. Used directly in most materials. In single plaster, concrete, brick and lightweight concrete together with Tillex clip plug. Corrosivity class C4 which provides a high level of outdoor protection.

Screw clips SCR C3 white Torx T20

Screw clips SCR C3 white Torx T20

Art. no.: 1501024

Polypropylene clips with coarse threaded screw for different base materials and cable diameters. Can be used in all basic materials. Depending on the base material, the SCR can be mounted directly, in a pre-drilled hole or supplemented with a plug, e.g. Gripper wall plug. Has a screw Ø 5.1 mm with TX20 head. Also suitable for outdoor use, corrosion class C3.

Screw clips SCR C3 white Torx T20

Screw clips SCR C3 white Torx T20

Screw clips SCR C3 white Torx T20

Screw clips SCR C3 white Torx T20

Screw clips SCR C3 white Torx T20

Screw clamp DC with plate screw PH2 C4

Screw clamp DC with plate screw PH2 C4

Art. no.: 1504392

Tillex PlatClips (Drillclips) are impact-resistant elastic Polypropylene that is halogen-free and UV-resistant in high quality from the factory in Denmark. For round cables. Strong screw 4.8x40mm with drill tip, which makes it suitable for assembly directly in sheet metal max 2.0mm, recommended speed: 1500-2500/min. Equipped with Philips cross groove PH2. (Also available with Torx T20). Corrosivity class C4, which provides high protection outdoors.

Screw clamp DC with plate screw PH2 C4

Screw clips SCR C3 black Torx T20

Screw clips SCR C3 black Torx T20

Art. no.: 1501182

Corrosivity class C3. For mounting cables in most basic materials. Depending on the base material, the screw clamp can be mounted directly in wood, boards, in a pre-drilled hole (concrete Ø4mm) or supplemented with a plug, e.g. Gripper or Universal plug X4.

Screw clips SCR C3 black Torx T20

Screw clips SCR C3 black Torx T20

Screw clips SCR C3 black Torx T20

Screw clips SCR C3 black Torx T20

Screw clips SCR C3 black Torx T20

Screw clamp SCR with sheet metal screw

Screw clamp SCR with sheet metal screw

Art. no.: 1501202

Metal Clips (Drillclips) For round cables. White color. Screw 4.8x35mm with a drill tip that drills quickly through plates up to a maximum of 2mm and creates its own thread, recommended speed: 1500-2500/min. Equipped with PH2 tracks. Corrosivity class C3, which provides good protection.

Screw clamp SCR with sheet metal screw

Screw clamp SCR with sheet metal screw

Magazine clamp MT for cable on wooden wall

Magazine clamp MT for cable on wooden wall

Art. no.: 1500425

Stored clamps for cable. Attaches directly to wood. For use both indoors and outdoors. Simple assembly with a staple gun.

Magazine clamp MT for cable on wooden wall

Magazine clamp MG for cable on plaster or lightweight concrete

Magazine clamp MG for cable on plaster or lightweight concrete

Art. no.: 1500435

Stored cable clamps. Attaches directly to plaster or lightweight concrete. For use both indoors and outdoors. Easy assembly with M-30 gun.

Magazine clamp MG for cable on plaster or lightweight concrete

Clamp TP for cable on wood black

Clamp TP for cable on wood black

Art. no.: 1500944

Black cable clamp for attaching directly to wood. For use both indoors and outdoors. Weave tool: GTP-mini e-number 1605492.

Nail clamps TKK, with steel nails

Schneider Electric

Nail clamps TKK, with steel nails

Art. no.: 1501159

TKK powder coated metal clamps are intended for surface installations of electrical cables both indoors and outdoors. The clamp is supplied complete with a built-in electroplated steel nail. The powder coating provides very good resistance to corrosion and mechanical impact, is classified C4 and has good resistance to heat and sunlight. Excellent where special aesthetic demands are made for cable routing together with overpainting, wallpapering, carpentry and more. For easy installation, use universal mounting tools that fit all sizes: TKK-Y, mounting tool kit, black (ref. 2360009) or TKK-N, mounting tool kit, blue (ref. 2360030) or TKK-S, mounting tool kit, black (ref. 2360018) . Can be used in wood, plasterboard, concrete and brick walls. Installation tips: For concrete, low-density concrete, brick and plasterboard, use together with Clipplug TCP.

Nail clamps TKK, with steel nails

Nail clamps TKK, with steel nails

Nail clamps TKK, with steel nails

Nail clamps TKK, with steel nails

Nail clamps TKK, with steel nails

Screw clamps TKK, with steel screw, for flat cable

Schneider Electric

Screw clamps TKK, with steel screw, for flat cable

Art. no.: 1501174

TKK powder coated metal clamps are intended for surface installations of electrical cables both indoors and outdoors: flat cable (6 x 9 mm). The clamp is supplied complete with built-in electroplated steel screw. The powder coating provides very good resistance to corrosion and mechanical impact, is classified C4 and has good resistance to heat and sunlight. Excellent where special aesthetic demands are made for cable routing together with overpainting, wallpapering, carpentry and more. For easy installation, use universal mounting tools that fit all sizes: TKK-Y, mounting tool kit, black (ref. 2360009) or TKK-N, mounting tool kit, blue (ref. 2360030) or TKK-S, mounting tool kit, black (ref. 2360018) . Can be used in wood, plasterboard, concrete and brick walls. Installation tips: For concrete, low-density concrete, brick and plasterboard, use together with Clipplug TCP.

Screw clamps TKK, with steel screw

Schneider Electric

Screw clamps TKK, with steel screw

Art. no.: 1501166

TKK powder coated metal clamps are intended for surface installations of electrical cables both indoors and outdoors: round cable. The clamp is delivered complete with built-in electroplated steel screw, dimensions 2.7 x 25 mm. The powder coating provides very good resistance to corrosion and mechanical impact, is classified C4 and has good resistance to heat and sunlight. Excellent where special aesthetic demands are made for cable routing together with overpainting, wallpapering, carpentry and more. For easy installation, use universal mounting tools that fit all sizes: TKK-Y, mounting tool kit, black (ref. 2360009) or TKK-N, mounting tool kit, blue (ref. 2360030) or TKK-S, mounting tool kit, black (ref. 2360018) . Can be used in wood, plasterboard, concrete and brick walls. Installation tips: For concrete, low-density concrete, brick and plasterboard, use together with Clipplug TCP.

Screw clamps TKK, with steel screw

Screw clamps TKK, with steel screw

Screw clamps TKK, with steel screw

Nail staples SCN 16-19 Nylon

Nail staples SCN 16-19 Nylon

Art. no.: 1501038

Advantages
- Plug and clamp in an anchor
- Small drilling diameter and short drilling depth
- Tapped into the borehole
- Locks itself in the borehole
Use
- Nail clips for pipes and cables
- For fixing cable bundles, individual electrical cables, plastic pipes, etc.

Nail-in clamps black SC

Nail-in clamps black SC

Art. no.: 1500422

Black, weather-resistant nail clamps SC are for fixing cables, pipes and other objects. SC is made of polypropylene, which makes the clip flexible and shockproof. SC can withstand different temperature conditions and withstands most chemicals. Due to its flexibility, one size can handle several cable dimensions. SC is also very easy to press on the cable. The clip is fitted with a hardened steel nail that is galvanized. The nail means that the SC staple can also be used in very hard woods.

Showing 49 of 49