Order lines: 0

Ahlsell Products Consumables Chemical technology and hygieneOil - grease - cutting fluids

Oil - grease - cutting fluids

Rustproofing and rust removers

Lubricating oils

Lubricating grease

Electronic products

Tapping and cutting fluids

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Multipurpose lubricant CRC 5-56 Bio Pro

Multipurpose lubricant CRC 5-56 Bio Pro

Art. no.: 74148107

Cutting oil rocol rtd

Cutting oil rocol rtd

Art. no.: 174903

Dark liquid with high viscosity. Consists solely of high pressure additives. Silicon free. Does not contain mineral oil. For the most difficult reaming, threading and drilling operations..RTD Clean cut - completely synthetic. For aluminium and copper. Hazard labelling: 5 litres = Environmentally hazardous. 400 ml spray = Extremely flammable, environmentally hazardous. 300 ml spray = Extremely flammable, environmentally hazardous. 400 ml liquid = Environmentally hazardous.

Cutting oil rocol rtd

Cutting oil rocol rtd

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Art. no.: 3115122

SUPERGLIDEX is a lubricant with silicone and is used when installing plastic sleeve pipes. SUPERGLIDEX is snow-white and has a pleasant creamy consistency. Neutral pH value (approx. 7). Frost-proof. Provides easy and problem-free assembly of plastic sleeve pipes, rubber strips and gaskets. The content of silicone means that the pipe parts can be easily dismantled even after a long time, in addition to protecting the rubber gasket from drying out/darkening. Good adhesion in wet/moist environments. Frostproof to -10.

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Lubricant, Uponor

Lubricant, Uponor

Art. no.: 3115185

For lubrication of the ends of the PVC pipes in connection with mounting of rubber sealed joints.

Lubricant, Uponor

Vaselin white

Art. no.: 195836

For greasing of plastic and rubber components. Also suitable for impregnation of paper covers on electrical cables and as an outer vibration-damping filler in optic-fibre cable. 1 kg.

Unipak Super Glidex Lubricant with silicone, for grooved systems

Unipak Super Glidex Lubricant with silicone, for grooved systems

Art. no.: 3115125

SUPERGLIDEX is a lubricant with silicone and is used when installing plastic sleeve pipes. SUPERGLIDEX is snow-white and has a pleasant creamy consistency. Neutral pH value (approx. 7). Frost-proof. Also available in extra low -30°C special version. Provides easy and problem-free assembly of plastic sleeve pipes, rubber strips and gaskets. The content of silicone means that the pipe parts can be easily dismantled even after a long time, in addition to protecting the rubber gasket from drying out/darkening. Good adhesion in wet/moist environments. Frostproof to -30.

Unipak Super Glidex Lubricant with silicone, for grooved systems

Cutting paste tilia

Cutting paste tilia

Art. no.: 211245

The cutting paste is made from vegetable oils. Used for cutting, processing, drilling and punching in most materials. Cooling and lubricating effect which also protects against rust. Suitable for tough materials such as aluminium/stainless steel.

Universal oil wd-40

Universal oil wd-40

Art. no.: 193047

Multi-spray that penetrates and dissolves rust, lubricates, repels damp, cleans and protects against rust. Labelling: harmful to health.

Universal oil wd-40

Universal oil wd-40

Universal oil wd-40

Universal oil wd-40

Protective rust primer

Protective rust primer

Art. no.: 288748

Rust-Oleum Hard Hat rustproofing base paint penetrates into the rusty surface and prevents continued corrosion. Can be repainted after 10 minutes but within 1 hour (or alternatively after 48 hours), can be handled after 30 minutes. Designed for bare or slightly rusty steel. Lead- and chromium-free. Hazard labelling: Extremely flammable, irritant,harmful to health.

Protective rust primer

Gejder oil magna sw 68

Gejder oil magna sw 68

Art. no.: 563852

For lubricating gliding surfaces in machine tools. Does not emulsify in cutting liquids, which is a great advantage in modern NC machines.

Cable lubricant LUB-1

Cable lubricant LUB-1

Art. no.: 1600435

Makes feeding cables and leads quicker, easier, cleaner and not least safer. 90% of cable faults are linked to damage that happens during installation. Cable greasing agent which works with the most common cable cover materials. The thick, flexible consistency doesn’t change during storage or temperature variations. The lubricant is easy to use and apply without runs or drops and isn’t harmful to the skin.

Cable lubricant LUB-1

Cable lubricant LUB-1

Grease universal food grease

Grease universal food grease

Art. no.: 308232

Food-approved long-term acting mineral-based universal grease for machinery, controls, valves, chains, gear, couplings, etc. Good thermal and mechanical stability, protects against corrosion. NSF H1. Hazard labelling: Extremely flammable.

Grease universal food grease

Wheel bearing grease Q8 Rubens WB

Wheel bearing grease Q8 Rubens WB

Art. no.: 910330

Lithium complex saponified mineral oil based
lubrication grease with high lubrication power, containing EP-additives and
rust protection additives. Has much better resistance at high
temperatures than common universal grease. Excellent all round grease for
crushing plants.
Typical usage areas
Asphalt machines, paper machines
Steel and aluminium industry
wheel bearings in busses and trucks in difficult operational conditions
Wheel bearings in vehicles equipped with disc brakes

The advantages:
Multi use grease with a wide area of use.
Very good thermal stability
Long greasing intervals
Excellent rust protection properties
Good water resistance and mechanical stability.
Lead free
Maintains its original consistency even after
temperature shocks over 250°C.

Rust oil crc 1066 frost chock

Rust oil crc 1066 frost chock

Art. no.: 560696

Fast-acting penetrating oil with freezing effect. Cracks up rust and corrosion through thermal shock. The cracks that occur allow the oil to quickly penetrate and release the corroded fixtures and components. For disassembly of screws, nuts, locks, hinges, valves, etc. Hazard labelling: extremely flammable.

Paste copper-paste loctite 806

Paste copper-paste loctite 806

Art. no.: 260454

Anti-seize paste in a tube package for simpler and easy use, easily fits in the pocket or the toolbox and is suitable for most applications. Lubricates and prevents seizing on, for example, bolted joints. 8060 is aluminium-based and withstands temperatures up to 900° C. Copper-based and withstands temperatures up to 980° C. Hazard labelling: irritant.

Paste copper-paste loctite 806

Oil contact-oil crc

Oil contact-oil crc

Art. no.: 471148

For all electric and electronic equipment. Displaces and excludes moisture. Protects against corrosion and oxidation. Lubricates and cleans. Does not damage measuring instruments and micro-mechanics. Hazard labelling: Highly flammable.

Oil contact-oil crc

Silikon electric grease

Silikon electric grease

Art. no.: 317964

Dow Corning 4 Electrical Insulating Compound, 100 gram. Electrically insulating grease, silicone-based. Excellent thermal stability and oxidation resistance. Good moisture barrier characteristics. Works as grease between -55 - +200° C. Often used as seal against moisture in aviation, vehicle, and marine applications. FDA-approved.

Thread oil rems spezial

Thread oil rems spezial

Art. no.: 2585210

High-alloyed thread liquid based on mineral oil. Rinsable.

Thread oil rems spezial

Industrial silicone spray Ironside

Industrial silicone spray Ironside

Art. no.: 377105

Silicone oil that protects, lubricates plastic and rubber parts, and isolates surfaces with invisible, durable protective film. Works also as cable release agent etc.
Equivalent to 224 074.

Industrial silicone spray Ironside

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Art. no.: 471480

All-round product that dissolves rust, grease and resin, drives out moisture, lubricates, stops squeaks and creaking and release stuck mechanisms, 556. Protects in corrosive environments and prevents rust. Item 10052: Labelling: harmful to health.

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Paste copper-paste crc

Paste copper-paste crc

Art. no.: 155456

Soft all-round paste. Intended to prevent burning and fixation by rusting caused by high temperatures up to 1100° C. Particularly suitable for simplifying disassembly of treated parts, even after long periods of use. For breaks, bolts, exhaust systems, exhaust manifolds, spark plugs, engine bolts, fittings and turbos. Protects the battery poles from oxidation.
CRC 3041 - Hazard labelling: Extremely flammable, irritant.

Paste copper-paste crc

Paste copper-paste crc

copper paste Henkel

copper paste Henkel

Art. no.: 313992

Copper-based anti-seizing paste. Typical applications: screws, nuts, pipes, bolts on exhaust gas systems, brake bolts. LOCTITE LB 8007 - spray bottle.

Cutting fluid rocol ultracut

Cutting fluid rocol ultracut

Art. no.: 174900

Semi-synthetic cutting liquid that can be mixed with water. Contains highly refined mineral oil. The concentrate has a transparent, green fluorescent colour. Free from biocide, nitrites, chlorinated paraffin, sulphur treated esters, phenols and phosphates. Usable on most materials, even stainless steel. Just as suitable in machines with advanced production systems as in ordinary conventional machines. Hazard labelling: Irritant.

Lubricant crc

Art. no.: 308240

Precision cleaning solvent for electric and electronic equipment. Quick and total evaporation. Fast and effective cleaning of PCB, contacts and components. Eliminates potential failures through preventative maintenance. Non-powered electronics K2.Hazard labelling: Extremely flammable, irritant.

Electronics cleaning CRC QD Contact cleaner

Electronics cleaning CRC QD Contact cleaner

Art. no.: 471318

Gentle, quick-hurricane electronics cleaning. Suitable for fragile plastics. Effectively removes light impurities, grease, oil. Or refreshing electronics after service. Also on measuring tools or as cleaning before gluing.

Lubrication Q8 rembrandt ep2

Lubrication Q8 rembrandt ep2

Art. no.: 292690

Lithium-saponified universal grease with good rust-protection characteristics and high EP capability, for lubrication of vehicles and stationary machines. Intended for general chassis lubrication, and for lubrication of bearings with medium-to-high RPMs. Good water resistance and high mechanical stability. TTemperature range -30°C - +110 °C. Registered in Basta.

Lubrication Q8 rembrandt ep2

Lube chain-lube loctite 8101

Lube chain-lube loctite 8101

Art. no.: 235653

LOCTITE LB 8101 is a special grease used for vulnerable mechanical systems. It is used to lubricate chains, open gears, lag screws, and cables and to protect against water penetration. It also provides excellent abrasion resistance and can withstand high pressure. Designed to withstand centrifugal forces in high-speed mechanisms. It is generally used for devices with operating temperatures between -30 °C and +170 °C.

The advantages:
Chain oil.
Special lubricant for vulnerable mechanical systems.
Protects against water penetration.
Exceptional resistance to wear and tear.
For lubricating chains, open gears, and lag screws.
Working temperature range between -30 ℃ and +170 ℃.

Bearing grease molykote

Bearing grease molykote

Art. no.: 105155

Suitable for glide and rolling bearings and for other grease-lubricated machine elements. From the fat, a firm lubricating film is created under pressure which is flattened in to the goods and which gives emergency running capabilities, if other lubrication should disappear.

Bearing grease molykote

Contact grease 500 ml

Contact grease 500 ml

Art. no.: 0654590

The grease has no oxide-degrading or corrosive ability, but is only intended to prevent new corrosion. Before connection, the oxide and dirt must be carefully removed. Temperature strength + 90º C continuously and + 200º C in the event of a short circuit. Packed in plastic tube.

Silicone grease molykote 55m

Silicone grease molykote 55m

Art. no.: 180037

Silicone-based grease for O-rings, for lubrication of rubber and metal applications. Very oxidation stable, compatible with most plastic and rubber materials.

Hydraulic oil hyspin aws

Hydraulic oil hyspin aws

Art. no.: 563854

Mineral oil based. Contains wear-reducing additives. ISO VG 32.46.

Hydraulic oil hyspin aws

Hydraulic oil hyspin aws

Industrial silicon CRC

Industrial silicon CRC

Art. no.: 462154

COLD GALVANIZATION RUST OLEUM

COLD GALVANIZATION RUST OLEUM

Art. no.: 377175

Zinc based products of very high industrial quality for the professional protection of bare steel or improvements on galvanized/zinc coated surfaces after sanding, welding and other processes. Grey matt look - 90% zinc in the dry film (99% pure zinc) - for the protection of bare steel, free from rust, and galvanized surfaces - Ideal for reformation of larger areas - is consistent with DIN 50.976 (1983) - Resists 430 hours of salt spray test (DIN) - heat resistant up to 100º C - Can be handled after 3 hours (at 20º C) - Covering ability: 10.5 m²/l

Lube silicon glidex unipack

Lube silicon glidex unipack

Art. no.: 3115109

GLIDEX Spray are versatile and effective sprays that are completely free of organic solvents and ozone-damaging propellants. NSF-approved for use in the food industry. GLIDEX Spray provides light, problem-free assembly of plastic collar pipes, rubber strips, and rubber gaskets. The silicone content means that even after an extended period, the pipe segments can be disassembled; the silicone also protects the rubber gasket against drying out or decaying. Good adhesion in wet/moist environments. GLIDEX Spray is also useful in pulling installation cables in pipes, and as a moisture barrier for conductive parts; it is also an effective, quick-acting lubricant for stuck locks, hinges, fittings, tools, etc.

Rust protection industry zinc

Rust protection industry zinc

Art. no.: 279594

A long-lasting rustproofing agent. Offers excellent properties when it comes to withstanding corrosion and mechanical wear & tear. Welded joints, screens, doors, beams, as well as other bodywork details. For improvement of damaged galvanised surfaces. 750 ml. Bulk. Labelling; environmentally hazardous.

Rust protection industry zinc

Grease universal crc 3045

Grease universal crc 3045

Art. no.: 157078

EP-lithium-based grease for roller and glide bearings in all normal loads and speeds, e.g. for impact loads and vibrations. Other applications are glide-controls, linear controls, connections, cone axles and screw spindles. Temperature range -36°C to +138°C.

Lubricating oil Ironside PTFE

Lubricating oil Ironside PTFE

Art. no.: 377100

Lubricant resistant to high pressure, which gives long-lasting protection against friction and wear. Used on metal, wooden surfaces and plastic. Teflon/PTFE combination. Repaintable. Silicon free. Equivalent to 462164.

Lubricating oil Ironside PTFE

Rust protection Master Rust Protection Aluzinc

Rust protection Master Rust Protection Aluzinc

Art. no.: 471225

Master Rust Protection Aluzinc is used where rust protection is required on e.g. car bodywork, welding joints and all kinds of iron and steel surfaces where overpainting will not take place. Rust Protection Aluzinc resists salt and atmospheric corrosion. Air-drying single-component, zinc-rich, epoxyester-based primer for steel. Master Rust Protection Aluzinc provides a very good rust protection. Care should be taken when overcoating with alkyd-based top-coats as there is a risk of saponification with the zinc. Master Rust Protection Aluzinc contains over 75% zinc in the finished color film and provides a surface that does not need to be overpainted. Matt Aluminium, metal.

Thread paste tilia

Thread paste tilia

Art. no.: 2590100

The thread paste is used when threading, grooving, drilling and more. Particularly suitable when working hard and tough alloys such as stainless steel, acid-resistant and aluminium. Excellent cooling and lubricating properties. Vegetable-based.

Thread paste tilia

Lubricant Master Dry PTFE lube

Lubricant Master Dry PTFE lube

Art. no.: 471233

The dry lubricant is a quick drying release and anti-friction agent that has a good adhesion and provides a dry sliding surface on most materials such as plastic, textile, rubber, wood, metal, glass, etc. The product provides a transprent dry PTFE film with a long life even under high pressure. The coefficient of friction is extremely low and does not stain. For term peaturer up to +250degreesC.

Bearing grease epfood 8054

Bearing grease epfood 8054

Art. no.: 308234

Ball bearing for machines within the food industry NLGI-2. Good pressure resistance, contains white particles and PTFE. Protects against corrosion in damp and wet environments, cold storage, etc. Temperature range -30°C to +160°C NSF H1.

Bearing grease epfood 8054

Paste assembly-paste g-rapid t

Paste assembly-paste g-rapid t

Art. no.: 270075

With solid lubricants. Broad Areas of use. Has very low friction coefficient. By applying the paste to the cleaned metal surfaces, a lubricating film of solid lubricant It is developed which reduces friction, prevents metal-to-metal contact (cutting, overheating), protects against wear and gives emergency operation capabilities. The solid lubricant is pressure-resistant up to the yield point for all known metals. High age and temperature resistance. Hazard labelling: Extremely flammable.

Silicone oil WD-40

Silicone oil WD-40

Art. no.: 377273

A classic silicone with WD-40 strong brand and with the superb solution Smart Straw.
Features and advantages:
- Smart Straw function
- Excellent lubrication
- Water repellent
- Friction damping
- Prevents rust and corrosion
- Temp. durability -35° C to 200° C
- Food grade NSF H2 #145374
Application areas: Belt, bearings, couplings, tools, pulleys, locks, hinges, etc.

Silicone oil WD-40

Lock Spray CRC Lock De-Icer

Lock Spray CRC Lock De-Icer

Art. no.: 236939

First aid for all types of lock. Thaws and prevents freezing as well as lubricating and cleaning. 15 ml. AE. Hazard labelling: Extremely flammable.

Assembly-paste

Art. no.: 471154

Universal grease, installation and start-up paste spray. Contains a combination of extremely pressure resistant fixed particles. Prevents wear, scratching and seizing. Simplifies installation of interference fits, seals and screws. It is recommended at slow slide movements under high pressure and a high temperature. Drive unit, open switches, torsion plates, rough controls, wire, etc.

Rust protection dinitrol 77b

Rust protection dinitrol 77b

Art. no.: 132324

Dinitrol 77B stainless wax in golden brown, strong, drying wax film. Long term protection of about 50-70um. Suitable for vehicles, boats and other iron and steel objects stored or transported under severe corrosion conditions. Excellent for sea transport. Golden brown/transparent. Spray in 500 ml. Hazard labelling: Extremely flammable.

Rust protection dinitrol ml

Rust protection dinitrol ml

Art. no.: 180840

Dinitrol ML thin penetrating cavities liquid with extremely high creep capability. Film thickness of about 10 µm. Intended for enclosed cavities and the outside of the chassis and joints before finishing with thicker wear protection. Also for internal and external corrosion protection of other iron and steel objects to be stored or transported. Beige/Brown. Hazard labelling: Highly flammable.

Universal grease penoil

Universal grease penoil

Art. no.: 471159

Universal lubricant and rust remover with excellent penetration properties. Dissolves rust, coatings, corrosion, releases and lubricates corrosive mechanisms. NSF H1. Hazard labelling: Extremely flammable.

Lubricant crc belt anti-slip

Lubricant crc belt anti-slip

Art. no.: 471155

Belt grip spray that preserves and increases efficiency of flat, round and V-shaped drive and transmission belts. Prevents grinding and gnashing and that drive belts cracking. Hazard labelling: Extremely flammable. NSF H1

Paste assembly paste

Paste assembly paste

Art. no.: 471105

Assembly paste and anti-seize compound. For lubrication of bushes, sliding surfaces and gears. Prevents damage at start-up and protects during running-in. Protects against seizing of threaded components. Effective from -30°C to +150°C as a lubricant and to +1100°C as an anti-seize. NSF H1. Hazard labelling: Extremely flammable.

Lubricant crc dry lube

Lubricant crc dry lube

Art. no.: 471150

Dry lubrication. Grease and oil free. For lubrication of plastic, rubber and metal. Withstands temperatures up to 250°C NSF H1. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Chain oil Q8 bizet bio68

Chain oil Q8 bizet bio68

Art. no.: 742705

Biodegradable, vegetable chain oil for chain saw chains and chain conveyors. Intended for year-round oil in the entire country. Particularly suitable for environments where high requirements on biodegradability are imposed.

Chain oil Q8 bizet bio68

Showing 52 of 165