Feedback
Sormat
Expansion anchor s-ka zpl
Expansion anchor 6/35X40 ZPL zinc plated S-KA 4pcs Sormat
Article number: Suppl. article no:
312231
9640094000
to see price and stock
S-KA- Zinc-plated. European type approved, ETA 08/0173 Option 1- cracked and uncracked concrete.
S-KA through cut expander is a torque tightened expander for use in cracked and uncracked concrete. It can also be used for installation in homogeneous substrate as full brick (but max M8)) and natural stone. The expander is of even thickness and can therefore be installed directly through the component. It can be used indoors and in mostly dry areas.
1) Drill a hole according to the table in the mounting data below 2) Using a brush and blow pump, clean the hole 3) Push in the expander 4) Tighten the expander to the recommended torque.
I) Permitted loads, kN in concrete C20/25.
* Not covered by the ETA values recommended by the manufacturer.
Cross load values apply to attachment without concrete edge impact.
S-KA through cut expander is a torque tightened expander for use in cracked and uncracked concrete. It can also be used for installation in homogeneous substrate as full brick (but max M8)) and natural stone. The expander is of even thickness and can therefore be installed directly through the component. It can be used indoors and in mostly dry areas.
1) Drill a hole according to the table in the mounting data below 2) Using a brush and blow pump, clean the hole 3) Push in the expander 4) Tighten the expander to the recommended torque.
I) Permitted loads, kN in concrete C20/25.
* Not covered by the ETA values recommended by the manufacturer.
Cross load values apply to attachment without concrete edge impact.
- Article number: 312231
- Suppl. article no: 9640094000
- Ean no: 6416031940002
- Material class TD201A
Technical data
- Packagin Size: 1 FRP/10 FRP/200 FRP
- Designation: S-KA
- Thread size (metric): 6
- Length: 40 mm
- Thread length: 18 mm
- Max. material thickness: 2 mm
- Drill diameter: 6 mm
- Drill depth: 35 mm
- Material: Carbon steel
- Surface treatment: Zinc-plated for indoor use
- Approved in accordance with: ETA 08/0173
- Thread type: Metric
- Area of use: Steel structures - Benches - Barriers - Cable Ladders - Banisters - Ladders - Elevation Systems
- Material: Cracked concrete - Uncracked concrete - Natural stone - Solid brick