Konvektorelement med tre effektläge att välja på:
750 / 1250 / 2000W. Med timer på 24h. Med fläkt för att ge snabb och bättre spridning av värme/luft. Monteras fast på fötter för att placeras stadigt på golv. Enkel att förflytta, diskret design och med fin yta.

Stylish and energy-efficient radiator with air exhaust at the front. Comes with a thermostat with low standby consumption and accurate temperature control. The thermostat has a weekly program and adaptive start. Choose from 9 different programs for each day of the week. The radiator itself will learn when it needs to raise the temperature to reach comfort temperature at the right time. The radiator is double-insulated and is connected via the supplied junction box. Meets Ecodesign requirements.

Pipe freeze protection is used in spaces that are unheated or have a tendency to freeze in winter. The freeze protection cable protects water pipes in summer cottages, wells, work sheds, barns, stables, cold garages, suspended foundations and other spaces or plants. It is completely free from PVC and lead and is therefore the best alternative from an environmental point of view. Approved for both external and internal pipe installation.

The cable is self-regulating and automatically controls the output according to the ambient temperature. It gives somewhat more output in internal installations compared to external and manages to freeze-protect pipes up to 50 mm at -25°C, provided that the pipe has at least 30 mm insulation or is buried at least 50 cm deep. For internal installation, a watertight lead through is used (Part no. 8935000) which is ordered separately. Output: 10W/m at +5°C in metal pipe.

The cable must, irrespective of length, always be connected to 230 V and protected by a 30 mA earth fault breaker. It has a homogeneous self-regulating core for optimum heat conduction. A multi-purpose braid for optimum electrical protection and excellent insulation properties. Plug IP44 and 2 m connecting cable. Approved by Semko for installation in pressurised drinking water pipes.

Movable heating fan with adjustable thermostat.

Analogue thermostat for mounting in standard apparatus box.
The thermostat can be set to the desired temperature from + 5ºC to + 30ºC.
Light diode indicates that the heat is connected.
Comes with 3m floor sensor, Eljo frame and centre plate as well as Elko centre plate.

Stylish and energy-efficient radiator with front air outlet. Comes with a thermostat with low standby consumption and accurate temperature control. The thermostat has a weekly program and adaptive start with self-extinguishing lighting. Choose between 9 different programs for each weekday. The radiator will learn when it needs to raise the temperature to reach comfort temperature at the right time. The radiator is double-insulated and has alternative connection options, either via the included socket and connection cable in the supplied junction box or directly in the wall socket. Meets Ecodesign requirements. "

aHeat is a compact and safe fan heater designed for portable use.
Small and portable fan heater with high output temperature. It is suitable for heating small spaces, such as summer cottages, office space, conservatories, garages, etc. It has a self-limiting PTC-element that cannot be overheated. The fan heater is equipped with a cord and plug for connection to an earthed socket. Casing in black-painted steel plate and handle of black plastic. High level of safety thanks to dual protection (thermal switch and adjustable thermostat). Power Modes; 1000/2000 W. With 1.5 m cord.

Movable heating fan with adjustable thermostat.

The installation kit consists of a 2 m flexible pipe for floor sensor Ø 11 mm, transition sleeve 16 mm and 6 adhesive rods for the heating cable.

a-collection heating cable mat is available for areas between 1.5 and 8 m².
Power is 90 W/m² and the width is always 50 cm.
The mat is self-adhesive over the entire surface and can be laid directly on combustible surfaces.
The mat is only 3 mm thick and can be placed directly in tile adhesive or in screed.
Since the carpet is supplied without a thermostat, a thermostat must be ordered separately.
Choose between analogue and digital thermostat below.

The a-collection underfloor heating cable is a thin heating cable, only 5 mm in diameter, for flexible installation in wet and dry areas.
The cable output is 10W/m.
The cable has a connection end and is supplied with 2.5 m cold lead connector.

Your kit comprises three parts:
1: Select cable with consideration to the floor space and power needs.
2: Select an analogue or digital thermostat.
3: Add an installation kit that contains flexible pipes for the floor sensor and adhesive rods.
c/c measurement for the installation, it is always the area to be heated/cable length that is calculated.

Front part of Exxact version suitable for analogue (E8580238) or digital (E8580239) thermostat.

Floor sensor as spare part for analogue / digital floor heating thermostat a-collection.

Waterproof bushing, thread R15 / 20, for a-collection antifreeze cable.
Applies only to the series: 8982502-8982525

Waterproof bushing set in R20 dimension for a-collection frost protection cable. Bushing for R20 / R25 included.
NOTE! Must be lubricated during installation with associated lubricants provided with the product.

Underfloor heating thermostat with high-resolution color touch screen. The thermostat starts the heating system at preset times every day of the week. You can set individual times for up to six separate periods, called events, for each day of the week. Lowering the temperature when no one is home lowers energy costs without The thermostat is delivered with a preset saving program that suits most homes.

The thermostat has an adaptive function that automatically changes the start times of the heating system to ensure that the desired temperature has been reached at the beginning of each specific event. After a few days, the adaptive function will have learned how much earlier the heating system must be switched on. The resistive touch screen only needs a light finger press to perceive the touch.

Adapted for Exxact. Flexible choice of floor sensors 10kΩ, 12kΩ and adapted. IP21. 2-pole main switch. Equipped with a built-in room sensor and a floor sensor to regulate underfloor heating in different positions: floor sensor, room sensor and a combination of room sensor with floor sensor as temperature limiter. 3 m sensor cable.
Meets the requirements of the ECO design directive.

Works with either floor sensors or room sensors.

Screen resolution: 220 x 176 pixels TFT - Color resistive touch
Clock function: Up to 4 or 6 program combinations