For use where the mechanical stress is medium, in dry or explosive spaces outdoors. Even for installation in temporary buildings and work sheds. cable with oil- and water-resistant cover. Temperature range in continuous operation max. wire temperature: 60 degrees. The cable is flexible down to -25 degrees.

Cable intended for solar panels. For connecting the modules and connecting the modules to the inverter. Durable, double insulated, halogen-free and UV resistant. Designed and tested according to European standard: EN 50618.CPR class: ECA. Water resistant according to AD8. Full lengths are delivered on the plastic reel.

AXQJ is a halogen-free cable with sector-shaped conductor of aluminium according to IEC 60228 class 2. PEX insulated conductors and casing of black halogen-free compound. The cable has a screen of annealed copper wire with a counter spiral. Indoor or outdoor installation in pipes as well as in the ground/water. In scaffolding and rooms with explosion hazard. Ploughable. Standards according to SS 424 14 18, HD 604. Flammability class: F4C according to IEC 60332-3. The parts are colour-coded according to SS 424 17 20.

3-LED: brown, black, grey.
4-LED: blue, brown, black, grey.

ELQRB is used as the signal cable in various measuring and control equipment.
Intended for signalling installations in indoor and outdoor use but not in ground. polythene insulated, with halogen-free flame-protected sheath.

For connection of detectors to fire alarm systems. For fixed installation indoors or outdoors, but in-ground. Polyethylene insulated, with halogen-free flame-protected sheath.

*Halogen-free
*Twisted pair cable.
*Fireproof IEC 60 332-1-2, F2
*One pair made with 1.0-mm wire
Red jacket for fire alarm
*Swedish standard, halogen-free SS 424 16 54
*ROHS approved

Cable with one-wire conductor structure. The insulation and outer shell are of PVC, or a special halogen-free mix. The cable has pairwise twinned leads, which reduces signal interference between the leads. It is equipped with a common shield of aluminium foil, to protect against external electrical interference. The cable is used to transfer telegrams in KNX plants. The cable is high-voltage insulated and can be installed along with power cables. If it is to be installed outdoors, the cable must be placed in a pipe.

a-collection EXQ is a halogen-free, PEX-insulated, HFFR sheathed installation cable that is intended for permanent installation indoors and outdoors, but not in ground or water. UV-resistant jacket (conductor insulation must be protected from direct UV light). Solid conductors of round, annealed copper. White jacket and color-coded conductors: 3-conductor (brown, blue, yellow / green) 4-conductor (brown, black, blue, yellow / green), 5-conductor (brown, black, gray, blue, yellow / green). Fire spread class: Dca.

N1XV is a lead-free cable. N1XV-U round with solid conductors of annealed copper according to IEC 60228 class 1. N1XV-R round with stranded conductors of annealed copper according to IEC 60228 class 2. PEX insulated conductors and sheath of black PVC. Intended for fixed installation in soil, water and pipes. Norm according to SS 424 14 18, HD 603. Fire spread class: Eca. Parts color-coded according to SS 424 17 20. Sheath marking: type/manufacturer/year + month/meter marking. Ambient temperature for installation of N1XV is between -10-+50 °C.

3-core: green/yellow, blue, brown
4-core: green/yellow, brown, black, gray
5-core: green/yellow, blue, brown, black, gray

Twisted RK is an extra flexible and easy-to-use connector.

Telecable ELQXBE is intended for telecommunications and broadband applications ADSL and VDSL as well as alarm signaling indoors in property networks. Transmission characteristics matched against the fixed telephone network. The cable has an uncoated copper conductor insulated with polyethylene for low capacitance and good insulation. Striped for easy identification. Parties with short pitch and an impedance of 120 ohms provide excellent properties for ADSL / VDSL as well as alarm and signal applications. Sheath of flame-retardant halogen-free polymer. The cable is sheathed with a discreet color that meets the marking requirements but minimizes visibility in open installations. Can also be used to advantage as a replacement for EKKX, ELQXB and EQQXB. Maximum voltage during operation 100V.

FXQJ is a halogen-free cable, with round, solid copper conductors according to IEC 60228 class 2. PEX insulated conductors, black halogen-free HFFR casing. The cable has a screen of annealed copper wire with a counter spiral. Indoor or outdoor installation, in open air, pipes, ground/water. Manufactured according to SS 424 14 18, HD 603. Flammability class: IEC 60332-3 category C (F4C). The parts are colour-coded according to SS 424 17 20. Jacketed with black, flame-retardant, UV-protected, halogen-free HFFR plastic. Jacket-marking, by printing or embossing the outer jacket with the following text: EXQJ 4x16 / 16 1kV, year and metre marking.
Rated voltage: 0.6 / 1 (1.2)kV
Lead identification:
3-LED: brown, black, grey.
4-LED: brown, black, grey, blue.
Norms:
IEC 60228, HD 383
HD 603-1, HD 603-5-P, HD 308
EN50265-1, EN 50265-2-4, IEC 60332-3 Cat. C
IEC60754-2, IEC 60754-1, IEC 1034-2

EXQJ is a halogen-free cable with a round solid copper conductor according to IEC 60228 class 1. PEX insulated conductors and sheath of black halogen-free HFFR. The cable has a shield of annealed copper wire with a counterspiral. Installation indoors and outdoors, in air, in pipes, ground/water. Construction according to SS 424 14 18, HD 603. Fire spread class: Dca. Parts color-coded according to SS 424 17 20. Sheath, made of black flame retardant, UV protected, halogen-free HFFR plastic. Sheath marking, by printing or embossing the outside of the outer sheath with the following text: EXQJ 4x6/6 1kV, year and meter marking.

Twisted ROHS-approved RQ which is delivered in a flexible box with meter-marked cable. Coupling wire with uncoated multi-wire copper conductor, insulated with flame-retardant halogen-free polymer, black / red. Twisted pair for attenuation of induced currents from electric interference fields that can give rise to gleaming LED lighting. The cable is primarily intended for connection of LED luminaires in low-voltage systems. Placed in pipes during installation in buildings. Fire classification EN 50575 Dca -s2, d2, a1

HFFR insulated connecting cable with class 2 conductor intended for fixed installation in fixed pipe or duct systems and as connecting cable in cabinets or fittings. Flexible and easily stripped cable with low friction when pulling in duct systems and pipes makes the cable flexible and easy to work with in both new installation and renovation jobs. The conductor insulation must be protected against direct UV light.