Function Op, operation delayed: Time calculation starts when the contact on the active input is closed. After the set time the relay switches on regardless of whether the contact on the active input is closed or open. If the contact is closed again after the time calculation has been switched off, the relay turns off and the time calculation starts again.
Function in, delayed disconnection: Time calculation starts and the relay opens when the contact on the active input is closed. After the set time the relay switches off regardless of whether the contact on the active input is closed or open. If the contact is closed again after the time calculation has been completed, the relay turns on and the time calculation starts again.
Function Dr, drop out delayed: The relay opens when the contact on the activation input is closed. When the contact is broken the time calculation starts. After the set time, the relay turns off. If the contact on the active input is closed while the time calculation is being made, the time calculation is reset while the relay is still turned on.
Flashing Function - Function R: (ON time first), (Function, Rb, OFF time first). When the control voltage is connected, the time starts to be calculated, when the period has expired the relay disengages. When the time for the disengaged relay has expired, the relay opens. This process continues as long as the control voltage is connected. The time for the rest and running time is equal. All relevant data, as well as the circuit diagram are clearly marked on the side of the relays.
Indication: 2 LEDs. Green lights up when the control voltage is connected. Yellow lights up when the relay is closed and flashes during the time calculation

Galvanised and made passive. RoHS-compatible.
In accordance with EN 60715.

Flexible holder for bunches of wire and wiring
Cable holders that can be used on uneven surfaces, e.g., in narrow channels and around corners. Wires can be pulled out or pushed into the holder in the desired position. Individual conductors can looked up, noticed, replaced or spliced without other locations being affected. Contains no covers or other loose parts. Can be cut with ordinary side cutter. Is attached with included adhesive tape or screwed. Satisfies requirements for UL94V-2 (listing). In 0.5 metre lengths.

Galvanised and made passive. RoHS-compatible.

Nickle plated

Encapsulated circuit breakers / disconnectors according to IEC 60947-3 also for use as safety switches where required. Made of polycarbonate with good impact strength both in cold and at high temperatures and retains its properties well even after long-term outdoor exposure. Resistant to weak acids, aliphatic hydrocarbons, paraffin, alcohols (without methanol).