Padlock with hardened shackle and housing made of brass; incl. 2 keys. Same locking.

Padlock with hardened shackle and housing made of brass; incl. 2 keys.

Securing for lighter loads. The pipe sleeves are designed to be used in the manufacture of concrete structures where some form of threaded securing is required. Because of a hole in the pipe sleeve, the reinforcement bar can be fitted as an extra securing, which means that the load will be distributed over a greater area and the capacity will be greater. The pipe sleeves are made from cold-drawn precision steel pipes and are available in zinc-plated and stainless steel acid-proof versions. This type of pipe sleeve is sometimes referred to as a Blade sleeve. The pipe sleeves must not be used for lifting.

Transport anchor is used as an anchor, e.g., for a hoist or spike in prefab concrete structures. It consists of a nut made of cold-cast, seamless, precision steel tubing which after galvanising is pressed firmly under very high pressure around a reinforcement bar.

Extremely strong brass padlock with external polished chrome outer – comes with 5 copy-protected keys.

Towel rail 1-hook double. Concealed fixing. Brass polished chromium and matt chrome. Screw length 30 mm.

Towel rail, Azure. Concealed fixing. Brass polished chromium and matt chrome. Screw length 30 mm. 2-hook c/c 170 mm, and 3-hook c/c 331mm.

Towel hook House. Finish in chrome and satin chrome. Including screw 40mm and plug. Mounting instructions included in the packaging.

Towel hook 1-hook single. Concealed fixing. Brass polished chromium and matt chrome. Screw length 30 mm.

Towel rack with 4 hooks in stainless steel, with unique suction cup technology. Installed without drilling or gluing. Attach to clean, dry and smooth tile or glass surfaces only. Length 300 mm. Load capacity approx. 7kg.

Self-adhesive mounting plate for Vacuumline. Used on uneven substrates. Load capacity approx. 3kg. F25st

Expanding driving belt made of PUR (polyurethane) for joining and sealing for new installations of windows and doors

Mounting plate for gluing for drill-free installation incl. screw and sleeve for Hand towel holder Azur. The plates fit Azur shower and soap baskets 297670 and 297671. Used together with Glabete glue.

Hook strip, compact, high-pressure laminate. Stainless steel hook.

The basic gutter hook is a durable hook made from the same material as the other system. Bent according to the roof slope. The 160mm gutter hook is used for mounting on rooftops at slopes up to 18 degrees.

Expansion tape, made from a synthetic material that expands upon contact with water. With a protective coating to delay swelling. Dimensions: 7x25 mm.

Towel rack A203 3-hook stainless

Gutter pipe bracket to keep the gutter pipe in place against the wall. Locking ring included.

Plastic blind seam strip used to create blind seams in concrete constructions. Easily attached to mould with spike or glue. Blind joint strips can also be procured in several other different dimensions. They can also be made out of rubber with magnet in the dimensions desired.

used for fastening columns (ground screw), lead spike, mounting, rod, reinforcing joint , etc; Quality S355J2 untreated. Can also be delivered on order in pre-cut lengths.

used for embedding columns (ground screw); lead spike, mounting, reinforcing joint, etc; Quality S355J2 hot-dip galvanised. Can also be delivered on order in pre-cut lengths.

Magnetic bevelling strip that creates smooth bevellings in the manufacturing of concrete structures.

Thick washer with eccentric hole to allow the securing of the wall shoe to be adjusted.

Transport anchor is used as an anchor, e.g., for a hoist or spike in prefab concrete structures. It consists of a nut made of cold-cast, seamless, precision steel tubing which after galvanising is pressed firmly under very high pressure around a reinforcement bar.

Extra strong PVC FRI spacer strip with high stability that is used to distance the lower edge reinforcement on vaults or ground. The special design provides a good flow of concrete partly due to the zig zag shape but also due to the staggered feet. By turning the spacer strip, it can easily be used even for soft surfaces. This works because the feet are offset relative to each other so that the net is always resting on one of all feet. The spacer strip copes well with point loads and is therefore also suitable for loose reinforcement. Placed with a c/c of approx. 0.8 m. Consumption approx. 1-1.5 pcs/m² depending on reinforcement dimension and substrate.