Order lines: 0

Ahlsell Products Electric Installation equipment 11-18 13 Motion, time, light control Presence detectorsPresence detectors Dali

Presence detectors Dali

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Presence sensor P47MR DALI-2 SnapFit for flush mounting

Presence sensor P47MR DALI-2 SnapFit for flush mounting

Art. no.: 1301389

DALI-2 certified master sensor, medium range, SnapFit for flush mounting
This presence sensor has a medium range and is a standard master sensor that meets basic requirements for DALI light control in 3 zones. Extend the range with a DALI-2 secondary sensor (353-651021) or combine it with other P46 DALI-2 secondary sensors in the P40/M40 series.

Save time on assembly with SnapFit
Niko's unique SnapFit system provides a fast and stable installation in all types of suspended ceilings or fixed ceilings. The sensor is installed easily and quickly with a light twist-and-click movement. The screwless and easily accessible quick terminals make the sensor easy to install. Cable relief and installation/mounting of the cable cover is done completely without tools.

Reliable range tested to IEC63180
Niko P40 and M40 sensor series have been tested to the IEC63180 standard by third parties in a controlled environment. Automatic repeat tests ensure a reliable range.

Functions
• Range: Ø12 meters at a mounting height of 3 meters
• The range can be extended with up to 5 secondary sensors (353-651021)
• Suitable for controlling up to 64 DALI units
• Supports DALI broadcast (standard) and DALI Addressable
• Auto-configuration when changing a DALI coil/DALI unit
• Adjustable PIR sensitivity (4 levels)
• Settings and configuration can be locked with a PIN code

Light control
• Daylight control in up to 3 zones
• Automatic on/off
• Manual switch on/off via 230V pressure with automatic switch off
• Only lit via 230V pressure with automatic switch-off
• Orientation lighting
• Ignition level can be adjusted when daylight control is inactive

Wireless commissioning
• Commissioning and programming of the sensor is done easily and quickly via Niko's user-friendly app, Niko detector tool
• 2-way Bluetooth® communication provides quick commissioning and instant feedback in the app
• Event log records recently made configuration changes
• Web-based portal for documentation, backup and exchange of configuration files

Presence sensor P48MR DALI-2 SnapFit for flush mounting

Presence sensor P48MR DALI-2 SnapFit for flush mounting

Art. no.: 1301390

DALI-2 certified master sensor, long range, SnapFit for flush mounting
This presence sensor is a master sensor with a wide range of advanced functions. It has a medium range for DALI light control in up to 4 daylight zones. Extend the range with a DALI-2 secondary sensor (353-651021) or combine it with other P46 DALI-2 secondary sensors in the P40/M40 series.

Functions
• Range: Ø12 meters at a mounting height of 3 meters
• Range can be extended with up to 10 secondary sensors (353-651021)
• Suitable for controlling up to 64 DALI units
• Possible to connect up to 64 external DALI-2 input devices via DALI bus
• Auto-configuration when changing a DALI coil/DALI unit
• Supports DALI broadcast (standard) and DALI Addressable
• Internal relay for control of HVAC/standby minimization/lights (On/Off)
• External DALI relay for HVAC/standby minimization/light (On/Off)
• Integrated Tunable white with programmable settings
• Human centric lighting (circadian light) with 24 programmable settings
• Wireless master-to-master connection
• External activation via external systems, e.g. alarm
• Daylight control with manual dimmer
• Suitable for BMS integration
• Adjustable PIR sensitivity (5 levels incl. deactivation)
• Settings and configuration can be locked with a PIN code

Light control
• Daylight control in up to 4 zones
• Automatic on/off
• Manual switch on/off via 230V pressure with automatic switch off
• Only lit via 230V pressure with automatic switch-off
• Bluetooth push, use Niko model no.: 72-503, 72-513, 72-504, 72-514
• 24V pressure and DALI interface, use Niko type no: 310-02200
• Create and activate up to 16 light scenarios
• Multizone for lighting the blackboard/smartboard
• Folding wall solution, lighting control in nearby areas, expansion of DALI units to more than 64 DALI units
• Orientation lighting
• Night mode - get the right light level both day and night
• Ignition level can be adjusted when daylight control is inactive

Presence sensor P47LR DALI-2 SnapFit for flush mounting

Presence sensor P47LR DALI-2 SnapFit for flush mounting

Art. no.: 1301405

DALI-2 certified master sensor, long range, SnapFit for flush mounting
This presence sensor has a medium range and is a standard master sensor that meets basic requirements for DALI light control in 3 zones. Extend the range with a DALI-2 secondary sensor (353-751021) or combine it with other P46 DALI-2 secondary sensors in the P40/M40 series.

Save time on assembly with SnapFit
Niko's unique SnapFit system provides a fast and stable installation in all types of suspended ceilings or fixed ceilings.
The sensor is installed easily and quickly with a light twist-and-click movement. The screwless and easily accessible quick terminals make the sensor easy to install. Cable relief and installation/mounting of the cable cover is done completely without tools.

Functions
• Reach: Ø37 meters at a mounting height of 3 meters
• The range can be extended with up to 5 secondary sensors (X)
• Supports DALI broadcast (standard) and DALI Addressable
• Suitable for controlling up to 64 DALI units
• Auto-configuration when changing a DALI coil/DALI unit
• Contains 3 PIR segments each covering 120°
• Adjustable PIR sensitivity (4 levels) in 3 x 120°
• One or more PIR segments can be disabled
• Settings and configuration can be locked with a PIN code

Light control
• Daylight control in up to 3 zones
• Automatic on/off
• Manual switch on/off via 230V pressure with automatic switch off
• Only lit via 230V pressure with automatic switch-off
• Orientation lighting
• Ignition level can be adjusted when daylight control is inactive

Wireless commissioning
• Commissioning and programming of the sensor is done easily and quickly via Niko's user-friendly app, Niko detector tool
• 2-way Bluetooth® communication provides quick commissioning and instant feedback in the app
• Event log records recently made configuration changes
• Web-based portal for documentation, backup and exchange of configuration files

Presence sensor, 360° 41-750

Presence sensor, 360° 41-750

Art. no.: 1300234

The presence sensor 41-750 Master is intended for recessed ceiling mounting in ceiling boxes. Detection area can be broadened with slave sensor 41-752 and/or 41-753.
The sensor has 4 separate zones, of which 2 or 3 zones are daylight controlled and 1 or 2 zones intended for separate control with on/off or dimming, depending on the type of light fixtures.
The sensor is equipped with DALI output for controlling daylight zones and potential-free relay output for controlling either lighting, HVAC or as cut-off of voltage to
DALI luminaires. Programming during installation uses remote control 41-934.

Presence detector 360° Dali 2-channel

Presence detector 360° Dali 2-channel

Art. no.: 1300251

Presence detector, with 360° coverage area, for ceiling mount, range up to 8 m in diameter with a recommended mounting height of 3 m, automatic illumination control of DALI or DSI-EL-FDs to constant light levels based on presence and daylight (with DALI/DSI output)

Presence sensor, 360° 41-751

Presence sensor, 360° 41-751

Art. no.: 1300235E

The presence sensor 41-751 Master is intended for ceiling mounting. Detection area can be broadened with slave sensor 41-752 and/or 41-753.
The sensor has 4 separate zones, including 2 or 3 zones are daylight controlled and 1 or 2 zones intended for separate control with on/off or dimming, depending on the type of
fittings.
The sensor is equipped with DALI output for controlling daylight zones and potential-free relay output for controlling either lighting, HVAC or as cut-off of voltage to
DALI luminaires. Programming during installation uses remote control 41-934.

Presence sensor, 360° 41-752

Presence sensor, 360° 41-752

Art. no.: 1300237

Presence sensor Slave 41-752 is designed for recessed ceiling mounting in ceiling boxes and for connection to the presence sensor Master 41-75X.
The presence sensor extends the detection area for all presence sensors of type Master 41-75X.
Easy to install, because the DALI bus is used as master/slave connection and thus separate installation is not required.

Presence sensor, 360° 41-753

Presence sensor, 360° 41-753

Art. no.: 1300238

The presence sensor Slav 41-753 is intended for ceiling mounting and for connecting to the Master presence sensor 41-75X.
The presence sensor extends the detection area for all presence sensors of type Master 41-75X.
Easy to install, because the DALI bus is used as master/slave connection and thus separate installation is not required.
The sensitivity can be set and the go-test can be activated by remote control.

Motion sensor, 360° 41-761 High Ceiling

Motion sensor, 360° 41-761 High Ceiling

Art. no.: 1300244

The motion sensor 41-761 Master is intended for ceiling mounting. Detection area can be broadened with slave sensor 41-762 and/or 41-763.
The sensor has 4 separate zones, of which 2 or 3 zones are daylight controlled and 1 or 2 zones intended for separate control with on/off or dimming, depending on the type of light fixtures.
The sensor is equipped with DALI output for controlling light zones and potential-free relay output for controlling either lighting, HVAC or as cut-off of voltage to DALI luminaries.
Settings
Using the remote control, one can choose between various functions for connecting control buttons, persistence time and lux settings.
Options
All functions provide the ability for auto on/offf or active on/off with auto off. Daylight control in up to 3 zones and relay output for HVAC
Daylight control in up to 3 zones and relay output for lighting on/off. Daylight control in up to 3 zones and relay output for cut-off (Stand-by minimization)
Daylight control in up to 3 zones for corridor solutions with day/night function and relay output for HVAC.
Programming during installation uses remote control 41-934.

Presence detector PD-C360i/24 DUO DALI

Presence detector PD-C360i/24 DUO DALI

Art. no.: 1300252

Presence detector with 360° observation area for ceiling mounting. Range up to 24 m with a recommended mounting height of 3 m. Automatic lighting control of DALI- or DSI-EL-FDs for constant light strength based on presence and daylight (with DALI/DSI output)

Presence control unit DALI plus recessed, Steinel

Presence control unit DALI plus recessed, Steinel

Art. no.: 1300595

Presence guard DALI Plus self-addressing DALI interface, 3 channels and 1 PF relay output. Recessed ceiling mounting. For rooms where more than one DALI group is needed, such as classrooms, conference rooms, office landscapes, industrial halls, garages. Possible with control of adjacent areas via neighboring zone function. Constant light with three groups, individual pushbutton inputs. A PF relay output controlled via switch. Square surveillance area, presence detection 8x8 m, movement 20x20 m. Recessed mounting. Configuration via remote control.

Presence control unit DALI plus ext, Steinel

Presence control unit DALI plus ext, Steinel

Art. no.: 1300596

Presence guard DALI Plus self-addressing DALI interface, 3 channels and 1 PF relay output. Recessed ceiling mounting. For rooms where more than one DALI group is needed, such as classrooms, conference rooms, office landscapes, industrial halls, garages. Possible with control of adjacent areas via neighboring zone function. Constant light with three groups, individual pushbutton inputs. A PF relay output controlled via switch. Square surveillance area, presence detection 8x8 m, movement 20x20 m. Surface mounted. Configuration via remote control.

Presence monitor Control Pro IR HD Dali-2

Presence monitor Control Pro IR HD Dali-2

Art. no.: 1301202

Presence monitor Control Pro IR HD DALI-2 IPD Slave from Steinel is a very reliable presence monitor for classrooms, conference rooms, larger office rooms, sports halls, etc. The sensor has a unique HD lens that detects the presence of 8x8 meters of seated people (minimum movement 15 cm), the surveillance area for walking people is 20x20 meters. Control PRO IR HD has a square surveillance area, which means that it will be much easier to plan the sensor's location and detection area. In the DALI-2 IPD design, the sensor is used as slaves to Steinel's DALI-master sensors (DALI Plus, series 3000, LiveLink) or as slaves in other lighting control systems, Beckhoff, WAGO and others. They are connected to the DALI loop and powered by it, therefore it is important to note how much power the slave sensor consumes. A DALI-2 IPD slave sensor only provides information to the master about presence and light level. All functions are set on the master or with the DALI system's control/control module.

Presence detector PD2N-M-DACO DALI-2

Presence detector PD2N-M-DACO DALI-2

Art. no.: 1301599

Presence detector in master design A DALI channel for lighting control. One-button input DALI-2-certified Internal and external light sensor DALI output: 80mA, can be expanded with a power supply The detection range can be expanded with a maximum of 8 slave units Programmed with BLE-IR adapter and BEG one app alternative remote control IR-PD-DALI for simple functions For surface mounting is used elevation frame

Presence detector PD4N-M-DACO DALI-2

Presence detector PD4N-M-DACO DALI-2

Art. no.: 1301604

Presence detector in master design A DALI channel for lighting control. One-button input DALI-2-certified Internal and external light sensor DALI output: 80mA, can be expanded with a power supply The detection range can be expanded with a maximum of 8 slave units Programmed with BLE-IR adapter and BEG one app alternative remote control IR-PD-DALI for simple functions For surface mounting is used elevation frame and for a long narrow detection area corridor lens is used

Presence detector PD4N-M-DACO-1C DALI-2

Presence detector PD4N-M-DACO-1C DALI-2

Art. no.: 1301605

Presence detector in master version A DALI channel and 1 relay for lighting control 2 pushbutton inputs DALI-2 certified Internal and external light sensor DALI output: 80mA, can be expanded with a power supply The detection area can be expanded with a maximum of 8 slave units Programmed with BLE-IR adapter and BEG one app alternative remote control IR-PD-DALI for simple functions A mounting frame is used for surface mounting and a corridor lens is used for a long-narrow detection area.

Presence detector PD-C 360 APC10 DALI-2, ESYLUX

Presence detector PD-C 360 APC10 DALI-2, ESYLUX

Art. no.: 1301477

DALI-2 certified ceiling presence detector with integrated DALI-2 control unit with power supply (250 mA). Light control in several rooms of up to 16 groups. Simple adaptation for individual and complex room situations. Presence- and daylight-dependent constant light regulation provides the highest energy efficiency. 16 A relays for HVAC switching and extended lighting. 4 button inputs (with potential). Multiple options for manual override options and up to 16 scenes. Automatic switching of the group when room use changes. Quick start with factory settings in broadcast mode. Individual groups are immediately ready for operation with the factory settings. Easy configuration with the ESY app via Bluetooth two-way interface. Easy documentation and management of configured projects with the ESY app (e.g. PDF report). Surface mounting with accessories

Presence sensor P48LR DALI-2 SnapFit for flush mounting

Presence sensor P48LR DALI-2 SnapFit for flush mounting

Art. no.: 1301406

DALI-2 certified master sensor, long range, SnapFit for flush mounting
This presence sensor is a master sensor with a wide range of advanced functions. It has a long range for DALI light control in up to 4 daylight zones. Extend the range with a DALI-2 secondary sensor (353-751021) or combine it with other P46 DALI-2 secondary sensors in the P40/M40 series.

Functions
• Range: Ø12 meters at a mounting height of 3 meters
• Range can be extended with up to 10 secondary sensors (353-751021)
• Suitable for controlling up to 64 DALI units
• Possible to connect up to 64 external DALI-2 input devices via DALI bus
• Auto-configuration when changing a DALI coil/DALI unit
• Supports DALI broadcast (standard) and DALI Addressable
• Internal relay for control of HVAC/standby minimization/lights (On/Off)
• External DALI relay for HVAC/standby minimization/light (On/Off)
• Integrated Tunable white with programmable settings
• Human centric lighting (circadian light) with 24 programmable settings
• Wireless master-to-master connection
• External activation via external systems, e.g. alarm
• Daylight control with manual dimmer
• Suitable for BMS integration
• Adjustable PIR sensitivity (5 levels, incl. disabled) in 3 x 120°
• Settings and configuration can be locked with a PIN code

Light control
• Daylight control in up to 4 zones
• Automatic on/off
• Manual switch on/off via 230V pressure with automatic switch off
• Only lit via 230V pressure with automatic switch-off
• Bluetooth push, use Niko model no.: 72-503, 72-513, 72-504, 72-514
• 24V pressure and DALI interface, use Niko type no: 310-02200
• Create and activate up to 16 light scenarios
• Multizone for lighting the blackboard/smartboard
• Folding wall solution, lighting control in nearby areas, expansion of DALI units to more than 64 DALI units
• Orientation lighting
• Night mode - get the right light level both day and night
• Ignition level can be adjusted when daylight control is inactive

Presence sensor P47LR DALI-2 surface mounting

Presence sensor P47LR DALI-2 surface mounting

Art. no.: 1301408

DALI-2 certified master sensor, long range, for surface mounting
This presence sensor has a long range and is a standard master sensor that meets basic requirements for DALI light control in 3 zones. Extend the range with a DALI-2 secondary sensor (353-752021) or combine it with other P46 DALI-2 secondary sensors in the P40/M40 series.

Save time on installation and commissioning.
The sensor is designed for surface mounting. The screwless and easily accessible quick terminals make the sensor easy to install.

Reliable range tested to IEC63180
Niko P40 and M40 sensor series have been tested to the IEC63180 standard by third parties in a controlled environment. Automatic repeat tests ensure a reliable range.

Functions
• Reach: Ø37 meters at a mounting height of 3 meters
• Range can be extended with up to 5 secondary sensors (353-752021)
• Supports DALI broadcast (standard) and DALI Addressable
• Suitable for controlling up to 64 DALI units (the total current consumption must not exceed the master sensor's max. load 100mA)
• Auto-configuration when changing a DALI coil/DALI unit
• Contains 3 PIR segments each covering 120°
• Adjustable PIR sensitivity (4 levels) in 3 x 120°
• One or more PIR segments can be disabled
• Settings and configuration can be locked with a PIN code

Light control
• Daylight control in up to 3 zones
• Automatic on/off
• Manual switch on/off via 230V pressure with automatic switch off
• Only lit via 230V pressure with automatic switch-off
• Orientation lighting
• Ignition level can be adjusted when daylight control is inactive

Wireless commissioning
• Commissioning and programming of the sensor is done easily and quickly via Niko's user-friendly app, Niko detector tool
• 2-way Bluetooth® communication provides quick commissioning and instant feedback in the app
• Event log records recently made configuration changes
• Web-based portal for documentation, backup and exchange of configuration files

Presence sensor P48MR DALI-2 surface mounting

Presence sensor P48MR DALI-2 surface mounting

Art. no.: 1301393

DALI-2 certified master sensor, medium range, for surface mounting
This presence sensor is a master sensor with a wide range of advanced functions. It has a medium range for DALI light control in up to 4 daylight zones. Extend the range with a DALI-2 secondary sensor (353-652021) or combine it with other P46 DALI-2 secondary sensors in the P40/M40 series.

Functions
• Range: Ø12 meters at a mounting height of 3 meters
• Range can be extended with up to 10 secondary sensors (353-652021)
• Suitable for controlling up to 64 DALI units
• Possible to connect up to 64 external DALI-2 input devices via DALI bus
• Auto-configuration when changing a DALI coil/DALI unit
• Supports DALI broadcast (standard) and DALI Addressable
• Internal relay for control of HVAC/standby minimization/lights (On/Off)
• External DALI relay for HVAC/standby minimization/light (On/Off)
• Integrated Tunable white with programmable settings
• Human centric lighting (circadian light) with 24 programmable settings
• Wireless master-to-master connection
• External activation via external systems, e.g. alarm
• Daylight control with manual dimmer
• Suitable for BMS integration
• Adjustable PIR sensitivity (5 levels incl. deactivation)
• Settings and configuration can be locked with a PIN code

Light control
• Daylight control in up to 4 zones
• Automatic on/off
• Manual switch on/off via 230V pressure with automatic switch off
• Only lit via 230V pressure with automatic switch-off
• Bluetooth push, use Niko model no.: 72-503, 72-513, 72-504, 72-514
• 24V pressure and DALI interface, use Niko type no: 310-02200
• Create and activate up to 16 light scenarios
• Multizone for lighting the blackboard/smartboard
• Folding wall solution, lighting control in nearby areas, expansion of DALI units to more than 64 DALI units
• Orientation lighting
• Night mode - get the right light level both day and night
• Ignition level can be adjusted when daylight control is inactive

Presence sensor P48LR DALI-2 surface mounting

Presence sensor P48LR DALI-2 surface mounting

Art. no.: 1301409

DALI-2 certified master sensor, long range, for surface mounting
This presence sensor is a master sensor with a wide range of advanced functions. It has a long range for DALI light control in up to 4 daylight zones. Extend the range with a DALI-2 secondary sensor (353-752021) or combine it with other P46 DALI-2 secondary sensors in the P40/M40 series.

Functions
• Reach: Ø37 meters at a mounting height of 3 meters
• Range can be extended with up to 5 secondary sensors (353-752021)
• Suitable for controlling up to 64 DALI output units
• Possible to connect up to 64 external DALI-2 input devices via DALI bus
• Auto-configuration when changing a DALI coil/DALI unit
• Supports DALI broadcast (standard) and DALI Addressable
• Internal relay for control of HVAC/standby minimization/lights (On/Off)
• External DALI relay for HVAC/standby minimization/light (On/Off)
• Integrated Tunable white with programmable settings
• Human centric lighting (circadian light) with 24 programmable settings
• Wireless master-to-master connection
• External activation via external systems, e.g. alarm
• Daylight control with manual dimmer
• Suitable for BMS integration
• Adjustable PIR sensitivity (5 levels, incl. disabled) in 3 x 120°
• Settings and configuration can be locked with a PIN code

Light control
• Daylight control in up to 4 zones
• Automatic on/off
• Manual switch on/off via 230V pressure with automatic switch off
• Only lit via 230V pressure with automatic switch-off
• Bluetooth push, use Niko model no.: 72-503, 72-513, 72-504, 72-514
• 24V pressure and DALI interface, use Niko type no: 310-02200
• Create and activate up to 16 light scenarios
• Multizone for lighting the blackboard/smartboard
• Folding wall solution, lighting control in nearby areas, expansion of DALI units to more than 64 DALI units
• Orientation lighting
• Night mode - get the right light level both day and night
• Ignition level can be adjusted when daylight control is inactive

Presence sensor IR Micro Office DALI-2 APC Master, completely recessed

Presence sensor IR Micro Office DALI-2 APC Master, completely recessed

Art. no.: 1301714

Ceiling-mounted presence sensor for smaller rooms such as offices, toilets, meeting rooms, etc. DALI-2 Master sensor for a lighting group DALI, broadcast function. Square motion detection 6×6 m, presence detection 4×4 m. The sensor's functions (dim/off/on, lighting scenario, daylight control, neighboring zone function, etc.) are set via the Steinel Connect app. Settings and configuration can be locked with a PIN code. Complete for recessed mounting.

Presence sensor IR Micro Office DALI-2 APC Master, surface mounted

Presence sensor IR Micro Office DALI-2 APC Master, surface mounted

Art. no.: 1301715

Ceiling-mounted presence sensor for smaller rooms such as offices, toilets, meeting rooms, etc. DALI-2 Master sensor for a lighting group DALI, broadcast function. Square motion detection 6×6 m, presence detection 4×4 m. The sensor's functions (dim/off/on, lighting scenario, daylight control, neighboring zone function, etc.) are set via the Steinel Connect app. Settings and configuration can be locked with a PIN code. Surface mounting.

Showing 23 of 23