Order lines: 0

Ahlsell Products Electric E-mobility AccessoriesFoundations and Pillars

Fundament

Ahlsell offers charging stands and foundations for charging solutions from several well-known brands. Mounting of charging stands is facilitated by an adapter plate. These stands come both free-standing and with brackets for mounting. You can also find ground foundations for charging stands here. Both one and two chargers can be mounted on charging stands. For installation on concrete floors, mounting plates are available. In addition to mounting kits, mounting frames, and plinths, charging posts and foundations can be equipped with a number of accessories and spare parts. Place the charging stands in the usual parking lot and choose the solution that best suits the location.

Post for diffuser plate, for Electric Post Futura

Post for diffuser plate, for Electric Post Futura

Art. no.: 2449516

Post for fender board. Ø60 mm. Height 550 mm

Pipe pole with attaching plate, for Power pole Futura

Pipe pole with attaching plate, for Power pole Futura

Art. no.: 2449530

Pipe pole, Ø60 mm, with attachment plate, 200x200 mm. Height 750 mm. Conductive area, soft lead [mm²] 2x35.

Base plate for car heater panels

Saferoad Traffic

Base plate for car heater panels

Art. no.: 7778206

With a hot-dip galvanised pipe and through-passing cable inlet.

Base frame for LS4

Base frame for LS4

Art. no.: 2449896

Ground base plate accessories for LS4

Base plate for power pole

Base plate for power pole

Art. no.: 2449513

Foundation with post. Total length for both combined 0.9 meters.

Universal foundation for charging posts

Universal foundation for charging posts

Art. no.: 2452227

Standardized pre-fab concrete foundation that fits all charging posts using a steel adapter between foundation and post. Ensures quality by being large and robust enough without tipping over. Ensures quality during installation so all ground work is done in the same way regardless of the model of the post. Saves costs when replacing the post during service maintenance or a new model. Saves costs by being able to prepare more sites with foundations, ground pipes and lids when other excavation-ground work takes place

Cast iron lid

Art. no.: 2452230

Cast iron protective cover for Unimi-1Base universal foundations. The cover is used to pre-install the foundation that is ready for a future installation of electric car chargers. The lid can withstand loads according to standard B-125. The lid is available with a specially designed logo in the middle for extra cost.

Adapter charging post LS4, 2003

Adapter charging post LS4, 2003

Art. no.: 2452228

Adapter in 6mm powder coated steel for mounting charging post Garo LS4 to Unimi-1Base AC foundation. The adapter makes it easy and fast to install charging posts and ensures that installation takes place with high quality and stability according to requirements EN61851-1 / EN61851-22. Installation with an adapter saves time and costs when servicing, repairing or upgrading to future models of charging posts. Fastening is done with an M12 bolt. The adapter breaks in the event of a collision to protect the foundation.

Pipe post Unimi-1base 60mm

Pipe post Unimi-1base 60mm

Art. no.: 2445596

Pipe post 60 mm Unimi-1base adapter 1100 mm high above ground. For attachment to Unimi-1base. Fits most charging boxes that are intended to be attached to 60 mm pipes.

Post tube 60mm, black lacquered

CTEK E-Mobility

Post tube 60mm, black lacquered

Art. no.: 2480028

Classic post pipe in 60mm design, this is the standard dimension for most installations that are mounted on pipes. The pipe is painted in black and is supplemented with a foundation or mounting plate and a post bracket for the charging box.

Mounting plate floor

Mounting plate floor

Art. no.: 2480030

Mounting plate in steel is used for those installations that require floor mounting in concrete or similar solid material. The bracket has four pre-drilled holes, is supplemented with a 60mm pipe and a post bracket for complete floor installation. The 60mm seat tube (accessory) is attached to the mounting plate with three supplied bolts.

Pedestal Bas

Art. no.: 2480326

Terra AC Pedestal, metal, IK10

Ground mount GP60 - 160 Combo

Ground mount GP60 - 160 Combo

Art. no.: 2700069

Ground brackets are designed to fit 60mm foundations. Ground bracket Combo 160 has CC dimensions 160 mm and fits as an adapter for charging posts with CC-160 mm foot plate.

Post tube 60 x 1500 mm

Post tube 60 x 1500 mm

Art. no.: 2700028

Galvanized traditional engine heater pipe / post pipe 60mm x 1500mm

Concrete foundation 50cm

Eldon Installation

Concrete foundation 50cm

Art. no.: 2445605

Concrete foundation 50cm including Black 60mm pipe. The tube is 1500mm. Used for charging boxes and electrical outlet centers.

Concrete foundation 70cm

Eldon Installation

Concrete foundation 70cm

Art. no.: 2448472

Concrete foundation with 60 mm pipe for the ECO ONE charging post. If necessary, the post can be cut to the correct height, which is a maximum of 885 mm above the ground for mounting the ECO ONE charging post.

Collision protection Post 114-750

Collision protection Post 114-750

Art. no.: 2700296

Next Green - Collision protection post 114-750 is a collision protection for your charging station designed to be mounted either directly in, for example, concrete or in a 60mm foundation using the Ground GP60-160 Combo (E-no. 27,000 69). Collision protection post 114-750 has a post diameter of 114mm and a height of 750mm. The foot plate has CC dimensions-160mm and outer dimensions 200mm. The crash protection protects and pays attention to your charging station.

Stand Entity Compact

Stand Entity Compact

Art. no.: 2701047

Ground stand Entity Compact single. GARO Entity Compact can be easily installed on a wall or on a stand. Maybe it's a long way from the garage driveway to the nearest house wall. Our accessories are minimalistically designed to create a stylish feel. The GARO Entity Compact family includes a series of accessories for mounting. Choose stands or poles depending on how the installation looks.

Tube bracket plank and facade

Tube bracket plank and facade

Art. no.: 2700766E

Next Green – Pipe bracket plank and facade 60-540 is designed to be mounted on, for example, a parking plank, deflector plank, deflector beam, edge beam, retaining walls or facades for further assembly of charging box. Fixed-welded Ø 60 mm pole tube in a length of 540 mm.

Steel Foundation 500 PCC

Steel Foundation 500 PCC

Art. no.: 2700857

Pretec's steel foundation for charging posts has been optimized for mounting car chargers.

Quick and easy basic work
Adjustable
Lightly carried
Long service life and without negative impact on the environment
The foundation is delivered with attached fastening material (M20 cc 160) for easy installation of the post. The charging post can be easily adjusted afterwards if there should be any subsidence. The cable entry is double-sided and the height of the cable entry is flexible. The foundation is adapted to be able to insert a double-walled draft tube max. Ø110 mm.

Can be advantageously combined with Pretec's charging pole or the majority of other pole brands.

Greenpipe Quick Eco Base Foundation 60/520

Greenpipe Quick Eco Base Foundation 60/520

Art. no.: 7773126

Greenpipe Quick Eco Base Foundation 60/520 adapted to, among other things, charging posts, engine heaters and signs. Made from 100% recycled plastic. Stable construction, only 3.5 kg with truss. Gentle on both the environment, cables and installers. Lifespan 80 years, Very Good environmental and work environment choice.

Showing 21 of 21